XML Report Flag definitions

I am using TestStand 4.2.1 to generate an XML output file, which I have to parse with some other application. In those files, I notice that each of the Property nodes ends with a "Flags=" value such as: <Prop name='Status' Type='String' Flags='0x400000'>
I was wondering where the flags are defined? (ie, what are the bit values?)
Thanks for any pointers,
Richard

The full list of flags, including their values, is documented in the NI TestStand Help.
http://zone.ni.com/reference/en-XX/help/370052J-01/tsapiref/reftopics/propertyflags/
Tom
TestStand Documentation

Similar Messages

How add new field in layout in RDF using XML report definition

Hi, ALL
Do you know how add new field in layout of existing report in RDF using XML report definition. If I try change anything in RDF layout, layout which defined in XML override report layout.

hello,
in reports 6i we have this limitation, that you can not add a field to a report unless you re-default the whole report, as we do not support positioning-information in the customization file.
regards,
the oracle reports team

REP-6104: Invalid XML report definition

Hello All,
We're encountering the above error. What could be the cause of the problem?
We're using Oracle 10g 10.1.2 on AIX as our report server.
Any help would be greatly appreciated. Thanks!
[2006/8/6 1:17:56:737] (C Engine) ----------------------------------------
[2006/8/6 1:17:56:738] (C Engine) | Report customization/generation begins |
[2006/8/6 1:17:56:740] (C Engine) ----------------------------------------
[2006/8/6 1:17:56:744] (C Engine) Processing XML report definition 1 of 1.
[2006/8/6 1:17:56:745] (C Engine) *** Parsing the XML document ***
[2006/8/6 1:17:56:746] (C Engine) Creating XML parser object...
[2006/8/6 1:17:56:934] (C Engine) XML Parser Created!
[2006/8/6 1:17:56:955] (C Engine) Parsing report definition in document buffer...
[2006/8/6 1:17:57:910] (C Engine)
Internal error
[2006/8/6 1:17:57:916] (C Engine) ERROR: XML definition failed to parse!
[2006/8/6 1:17:57:917] (C Engine) -------------------------------------------------------
[2006/8/6 1:17:57:918] (C Engine) | Report customization/generation failed! |
[2006/8/6 1:17:57:921] (C Engine) -------------------------------------------------------
[2006/8/6 1:17:57:922] Error 50103 (C Engine): 01:17:57 ERR REP-6104: Invalid XML report definition.
[2006/8/6 1:17:57:923] Error 50103 (C Engine):
[2006/8/6 1:17:57:924] Error 50103 (C Engine): 01:17:57 ERR REP-0002: Unable to retrieve a string from the report builder message file.
REP-6104: Invalid XML report definition.

Hello,
What format do you use for your Reports ? JSP ? XML ? RDF ? REP ?
If you are using JSP or XML, try to save your Reports in Reports Buidler with the format RDF and use this RDF
Regards

XML Report Publisher program is erroring out

Hi All,
I've customized the AR Customer Statements.
I've created a data definition as "ARXSGP" and uploded the sample_output.xml of Statement Generation Program to it. Also I've created a Data template as "ARXSGPO" and attached the data definition "ARXSGP" to it and uploaded the customized rtf file "XXHCC_CLE_F_ARCUSBALSL.rtf" and set the default output type to PDF.
As I donot wish to call the XML Report Publisher program manually every time when I Print the Statements through Print Documents-->Statements.
So I've done the below customization in ARXSGP.rdf file ie; Print Statements Report which is an Oracle Report.
I've added the below code in After Report trigger.
=======================================
FUNCTION AfterReport
RETURN BOOLEAN
IS
BEGIN
Below code added for Customer Statement Case Study
DECLARE
l_req_id NUMBER := 0;
L_XML_LAYOUT BOOLEAN := TRUE;
BEGIN
L_XML_LAYOUT := FND_REQUEST.ADD_LAYOUT (TEMPLATE_APPL_NAME => 'AR', TEMPLATE_CODE => 'ARXSGP', TEMPLATE_LANGUAGE => 'en', TEMPLATE_TERRITORY => 'US', OUTPUT_FORMAT => 'PDF');
IF L_XML_LAYOUT THEN
srw.message(20001, 'Template is picked ');
srw.message(20002,'Concurrent request Id : '||:p_conc_request_id);
l_req_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
'XDOREPPB',
NULL,
NULL,
FALSE,
:p_conc_request_id,
222, -- Receivables
'ARXSGPO', -- Statement Generate
'en-US', -- English
'N',
'RTF',
'PDF');
IF l_req_id > 0 THEN
COMMIT;
ELSE
srw.message(20004, 'Failed to submit request');
END IF;
ELSE -- Not L_XML_LAYOUT
srw.message(20005, 'Template is not picked ');
END IF;
END;
--------------------Code Ends----------------------------
SRW.USER_EXIT('FND SRWEXIT');
RETURN (TRUE);
END;
==============================================
After Printing the Statements through Print Documents-->Statements
Statement Generation Program is being called and later XML Report Publisher program is also being invoked.
But the XML Report Publisher Program is erroring out with below error.
XML Publisher: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOREPPB module: XML Report Publisher
Current system time is 03-SEP-2012 17:42:18
Oracle XML Publisher 5.6.3
java.lang.NumberFormatException: For input string: "ARXSGPO"
     at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
     at java.lang.Integer.parseInt(Integer.java:447)
     at java.lang.Integer.parseInt(Integer.java:497)
     at oracle.apps.xdo.oa.cp.JCP4XMLPublisher.runProgram(JCP4XMLPublisher.java:215)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
0
------------- 1) PUBLISH -------------
Disabling requested Output Post Processing. Nothing to process. The output of the request is zero byte.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-SEP-2012 17:42:22
Please help out with a solution.
Thanks,
Tech D

for r12 add one row for parameter "Dummy for Data Security" from desc of XDOREPPB
follow works for me
SQL> set serveroutput on
SQL>
SQL> declare
2    v_request_id   number;
3 begin
4
5   begin fnd_global.apps_initialize(0, 20419, 0); end;
6   v_request_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
7                                              'XDOREPPB',
8                                              NULL,
9                                              NULL,
10                                              FALSE,
11                                              'N', -- Dummy for Data Security
12                                              9888637, -- Request
13                                              0, -- Template Application
14                                              'XXAND10_1', -- Template
15                                              'en-US', -- Template Locale
16                                              'N', -- Debug Flag
17                                              'RTF', -- Template Type
18                                              'RTF' -- Output Format
19                                              );
20
21    dbms_output.put_line(v_request_id);
22    if v_request_id > 0 then
23      dbms_output.put_line('successfully submitted.');
24      commit;
25    else
26      dbms_output.put_line('not submitted.');
27      rollback;
28    end if;
29
30 end;
31 /
9888651
successfully submitted.
PL/SQL procedure successfully completed
SQL> 'Y' for "Dummy for Data Security" also works for me
SQL> declare
2    v_request_id   number;
3 begin
4
5   begin fnd_global.apps_initialize(0, 20419, 0); end;
6   v_request_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
7                                              'XDOREPPB',
8                                              NULL,
9                                              NULL,
10                                              FALSE,
11                                              'Y', -- Dummy for Data Security
12                                              9888637, -- Request
13                                              0, -- Template Application
14                                              'XXAND10_1', -- Template
15                                              'en-US', -- Template Locale
16                                              'N', -- Debug Flag
17                                              'RTF', -- Template Type
18                                              'RTF' -- Output Format
19                                              );
20
21    dbms_output.put_line(v_request_id);
22    if v_request_id > 0 then
23      dbms_output.put_line('successfully submitted.');
24      commit;
25    else
26      dbms_output.put_line('not submitted.');
27      rollback;
28    end if;
29
30 end;
31 /
9888652
successfully submitted.
PL/SQL procedure successfully completed
SQL>

How to create new Custom XML Report without using Form Builder

Hi,
What are the steps to create new Custom XML Report without using Report Builder ?
Thanks and Regards,
Abhi

Hi,
Steps we now follow
1)Create Data Model in Reports Builder
2)Create xml
3)Insert xml in Publisher to build Fomat
4)FTp rdf
5)Create Data Definition and Template
6)Create executable and Concurrent Program
Is there any way we can build reports without use of Report Builder ? By writing PL SQL Package for Before Report and After Report etc ...
Thanks and Regards,
Abhijit Rode

Creating XML report using PL/SQL Stored Procedure

Hi Friends,
I am working on an xml report with the xml source as PL/SQL Stored Procedure.
I am referring the exercise shown in the following link to understand the process:
   http://orclapp.blogspot.com/2012/02/developing-xml-publisher-report-using.html
In the example shown in the above link I could not understand the following:
1) In the following procedure, the out parameter 'retcode' is not used at all.
   What is the importance of this parameter.
    PROCEDURE REPORT (errbuf OUT VARCHAR2, retcode OUT VARCHAR2, p_product_id   IN     NUMBER)
2) After the xml data is prepared and put to 'l_result' Clob variable, the following
    Loop is executed. I am not able to appreciate why the following loop is required.
     LOOP
         EXIT WHEN l_length = l_retrieved;
         IF (l_length - l_retrieved) < 32000
         THEN
            SELECT SUBSTR (l_result, l_retrieved + 1) INTO l_xmlstr FROM DUAL;
            l_retrieved := l_length;
            fnd_file.put_line (fnd_file.output, l_xmlstr);
         ELSE
            SELECT SUBSTR (l_result, l_retrieved + 1, l_offset)
              INTO l_xmlstr
              FROM DUAL;
            l_retrieved := l_retrieved + l_offset;
            fnd_file.put_line (fnd_file.output, l_xmlstr);
         END IF;
     END LOOP;
3) In the example it is not explained how the concurrent program gets the xml data?
   I assume it is written to a file using the following line of code:
    fnd_file.put_line (fnd_file.output, l_xmlstr);
   I would appreciate if anyone can throw some light into my above queries so that I can understand the process clearly.
Thanks & Regards
Hawker

Hi 32000 in the code is a 'safe' size smaller than the max available 32767, the loops purpose is to move through the entire thing in chunks that will be manageable in the limits of the data type.
Btw; if you are in Oracle e-business suite then you can also use Oracle reports very simply to create XML output.
If you have reports developer all you need to do is put raw sql (without any 'artifice' to create XML) in the report SQL and then set the reports output to XML in the program definition in Oracle e-business.
best regards,
Robert.

Barcode printing in XML report PDF output

Hi All,
I want to print barcode of invoice number / purchase order number in the XML report PDF output.
Anyone please suggest me with your ideas and experience.

Hi Bogdan,
The steps mentioned in the doc is what i did in order.
I couldn't understand the step # 13 & 14.
Log in as XML Publisher Administrator
Navigate to Administration --> Font Files --> Create Font File
Available fields are Font Name and File
--> for Font Name, choose any descriptive name
--> file will browse your PC to locate the font file
Navigate to Font Mappings -->Create Font Mapping Set
Mapping name is the name you will give to a set of fonts.
Mapping code is the internal name you will give to this set
Type: 'PDF Form' for PDF templates. 'FO to PDF' for all other template types.
Create Font Mapping (this allows you to add fonts to a set)
Font Family is the exact same name you see in MS Word under Font. If you don't use the same name the font will not be picked up at runtime.
Style and weight must also match how you use the font in the RTF or PDF layout template. Normal and Normal are good defaults.
Language and Territory should remain blank (NULL) unless you have a strong business reason, as these fields can cause the font not to be picked up at runtime.
Navigate to Configuration General -> FO Processing -->Font Mapping Set. This can also be done at Data Definition and Template level, via the corresponding Edit Configuration button on those pages. The hierarchy is Site-> Data Def -> Template.
Select your new mapping set.
Make sure the font is not referenced under File --> Properties --> Custom in the RTF template file.
Under General, set a Temporary Directory. The font will be stored under a /fonts directory at runtime, initially created the first time the font is used.
Upload a template that uses your special font and test using preview or by submitting a concurrent request.

XML Report Publisher - Blank Report Request Parameter

Hi
I have a custom template and custom data definition in Purchasing application. I ran PO Output For Communication and it generated the PDF. Now I want to do Bursting.
So, I assigned XML Report Publisher and XML Bursting (both out-of-box programs) to Purchasing responsibility. But when I try to run them, I don't see any values in Request ID LOV.
Please suggest what am I missing in there.
Thanks,
NewBie

user11061081 wrote:
Hi
I have a custom template and custom data definition in Purchasing application. I ran PO Output For Communication and it generated the PDF. Now I want to do Bursting.
So, I assigned XML Report Publisher and XML Bursting (both out-of-box programs) to Purchasing responsibility. But when I try to run them, I don't see any values in Request ID LOV.
Please suggest what am I missing in there.
Thanks,
NewBiePlease confirm that you have added those concurrent programs to the correct Request Group which is attached to the same responsibility.
From (System Administrator responsibility > Security > Responsibility > Define) query the responsibility name and get the Request Group. Then from (System Administrator responsibility > Security > Responsibility > Request), query the Request Group and add those concurrent programs.
Thanks,
Hussein

Creating an XML Report from OAF page

Hi All,
I have a requirement to create a PDF report from an OAF page. From the below code , I was able to print the XML with the values.
I know i should map this XML to RTF by creating the Data defiition through XML publisher responsibility.
My understanding :
1. Generate the XML from Conttroller
2. Load the XML to RTF and map the fields
3. Register as Data Definition and RTF
4. Output seen
MY QUESTION IS : If i load the values from the below XML to the RTF and register in the data definition , i will get the same values every time it is right . From my understanding, if the data has to change in the report, ,there should be a way which will directly send the generated xml from the controller to the RTF (Without step2)
I DEFINITELY BELIEVE, THAT I AM MISSING SOME THING HERE . PLEASE HELP ME
public void processRequest(OAPageContext pageContext,
OAWebBean webBean) {
super.processRequest(pageContext, webBean);
OAApplicationModule am =
(OAApplicationModule)pageContext.getApplicationModule(webBean);
OAViewObject vo = (OAViewObject)am.findViewObject("colorVO1");
ByteArrayOutputStream outputStream = new ByteArrayOutputStream();
//(XMLNode)vo.writeXML(4,"")
try {
((XMLNode)vo.writeXML(4, XMLInterface.XML_OPT_ALL_ROWS)).print(outputStream);
} catch (IOException e) {
// TODO
throw new OAException("The value of VO is " + vo,
OAException.CONFIRMATION);
System.out.println(outputStream.toString());
Generated XML :
<colorVOEx3Row>
<UserName>abc</UserName>
<UserId>33102</UserId>
<CreatedBy>27241</CreatedBy>
<Clr1>0</Clr1>
</colorVOEx3Row>
<colorVOEx3Row>
<UserName>deg</UserName>
<UserId>33604</UserId>
<CreatedBy>1135</CreatedBy>
<Clr1>0</Clr1>
</colorVOEx3Row>
<colorVOEx3Row>
<UserName>****mno</UserName>
<UserId>33643</UserId>
<CreatedBy>24587</CreatedBy>
<Clr1>2</Clr1>
</colorVOEx3Row>
</colorVOEx3
Please let me know what should me my next steps to generate the report. if i load the XML above to the RTF , irresepscive of my data from teh page, i will always get the 3 rows.i..e..(abc,def,*** mno).
Hope i am clear.

Hi Anand,
Thanks for your reply. I have gone through the link you provided . It gave me excellent information. But just one clarification , when we create the data definition, dont we have to add any of the files like 'XML Schema','Data Template','Preview Data','Bursting Control File'.
The reason, i am asking this question is, when i proviously worked with XML reports in 11.10.2, we used to attach a .xml file to the Data Template of the data definition ,which would populate the RTF.
Now here, if i dont attach that file in the data definition, will the XML data direclty mapped from contrlloer ?. I assume ,The only thing i need to do is to MAP the XML tags to RTF before registering ..
Please let me know if i am missing some thing
Thanks
Sunny

Unable to open XML report in Oracle EBS r12

Hi,
I have new installation of Oracle EBS r12 (12.1.1) on linux.
To test the XML report, I changed the output of standard report 'Active Users' from 'Text' to 'XML' and defined the data definition and template for this report.
I am unable to see the output for XML reports. The report completes without error, however I cannot open the output file.
The browser opens for fraction of a second and then closes down. My client machine is Windows 7 and I used Microsoft words 2010 to build template
I used the 5.7.201 version of BI publisher to create the rtf template.
Please help me to resolve this issue.
Thanks

I changed the output of standard report 'Active Users' from 'Text' to 'XML' and defined the data definition and template for this report.
looks like xml publisher report, so output for concurrent must be 'XML'
******* I have changed the output of concurrent program 'Active Users' from 'Text' to 'XML'
I am unable to see the output for XML reports.
how you see it?
******* I tried to open the report by clicking on 'Output' button from view request screen of EBS.
did you try after concurrent completed check 'diagnostic -> view xml'?
******* I haven't tried this. Will do now.
The report completes without error, however I cannot open the output file
what is error?
******* There is no error, the request completed successfully. When I tried to open the output file by clicking 'output' button, the browser doesn't open.
did you check OPP log?
******* There is nothing in the OPP log.
if concurrent failed so first of all check your code - data template and package (if used)
******* I used the standard EBS report 'Active Users' and just changed the output from 'Text' to 'XML' and attached the rtf template.

How can i use FNDLOAD for XML reports and data defnitions

I registerd concurrent program and linked xml reports and data defnitions in staging instance, and successfully moved to DEV.. after that stage is refreshed and when i download the details from DEV and uploaded to Stage only concurrent program i can upload...Wheteher we can use FNDLOAD Command for the Data definitions or Data template for the XML Report,used FNDLOAD for the concurrent program, it uploaded only concurrent program details.

Hi,
Use XDOLoader.
Note: 469585.1 - How To Use XDOLoader?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=469585.1
Regards,
Hussein

How to print XML report in French Language?

Hi,
I need to print XML report in French language, currently it display in English language.
I have used following steps:
1. I enabled French language on my oracle apps instance.
2. Created the concurrent program with output type as XML
3. Created Data Definition using XML Publisher Responsibility
4. Created template. At the time of creation of templete, enabled Translatable check box and click Apply
5. Once template is uploaded, you will find two buttons. Export Translation and Upload Translation.
6. Clickd on Export Translation. XLF file opened.
7. In XLF file - e. g. source-language="en-US" target-language="fr-FR".Source is English and fr is for French language and FR is territory.
8. Update the target fields in French language. In the below example source field is in English language and target is in French language. This indicates that wherever the Invoice Date is present in RTF template it will be
replaced by the target field in french language.
<source>Invoice Date:</source>
<target>Date de facture:</target>
9. Updated the same for all fields and finally import the updated translation file.
10. But When i run report , output display in English not in French.
Please any one can help, what should in do next to print in French Language.
Thanks,
Sunil Mane
Edited by: 973411 on Nov 30, 2012 6:56 AM

Are you selecting the Template at the time of Program submission?
Check in the Options while submitting the Program

XML Report not working

Hi All,
I developed a xml report but it is throwing below error..please help..
the log details are below
Shipping Execution: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXTEST_XML module: XXTEST1
Current system time is 18-JAN-2012 13:01:05
XDO Data Engine Version No: 5.6.3
Resp: 21623
Org ID : 204
Request ID: 5929328
All Parameters: P_org_id=207:P_phys_inv_id=5196
Data Template Code: XXTEST_XML
Data Template Application Short Name: WSH
Debug Flag: N
{P_org_id=207, P_phys_inv_id=5196}
Calling XDO Data Engine...
[011812_010109165][][ERROR] Variable 'P_phys_inv_id' is missing....
[011812_010109165][][EXCEPTION] java.sql.SQLException: ORA-06550: line 2, column 18:
PLS-00103: Encountered the symbol "." when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable>
continue avg count current exists max min prior sql stddev
sum variance execute forall merge time timestamp interval
date <a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
<an alternatively-quoted string literal with character set specification>
<an alternatively
Am posting xml also
<dataTemplate name="XXTEST_XML" >
     <parameters>
          <parameter name="P_org_id" dataType="character" />
          <parameter name="P_phys_inv_id" dataType="character" />
          <parameter name="P_REPORT_NAME" dataType="character" defaultValue="XXTEST_XML" />
          <parameter name="P_SUB_REPORT_NAME" dataType="character" defaultValue="" />
          <parameter name="P_CONC_PROG_SHT_NAME" dataType="character" defaultValue="XXTEST_XML" />
          </parameters>
     <dataQuery>
          <sqlStatement name="Q_MAIN">
          <![CDATA[
               select pit.tag_number,
pit.subinventory,
loc.segment1||'.'||loc.segment2||'.'||loc.segment3 locatorname,
pit.serial_num Serial_number,
pit.tag_quantity COUNTQTY,
pit.tag_uom uom,
v.FULL_NAME CountedBy,
msi.SEGMENT1||'.'||msi.DESCRIPTION ITEMDescr,
pit.parent_lpn_id ,
o.ORGANIZATION_NAME
from
mtl_system_items msi,
mtl_item_locations loc ,
mtl_employees_view v,
mtl_physical_inventory_tags pit,
org_organization_definitions o
where pit.organization_id = :P_org_id
and msi.organization_id(+) = :P_org_id
and pit.ORGANIZATION_ID=o.ORGANIZATION_ID
and loc.organization_id(+) = :P_org_id
and pit.inventory_item_id = msi.inventory_item_id(+)
and pit.locator_id = loc.inventory_location_id(+)
and pit.physical_inventory_id = :P_phys_inv_id
and pit.counted_by_employee_id = v.employee_id(+)
and v.organization_id(+) = :P_org_id
order by 1
]]>
          </sqlStatement>

Still this problem as unsolved ? If so, please check the concurrent request parameter which is passed to this Data Template.

Getting error: java.lang.NullPointerException while submitting xml report

hi every one,
i am getting the below error when submitting the Xml report Request
XDO Data Engine Version No: 5.6.3
Resp: 21635
Org ID : 204
Request ID: 5878206
All Parameters: P_ORGANIZATION_ID=7907:P_DELIVERY_DATE_LOW=:P_DELIVERY_DATE_HIGH=:P_FREIGHT_CODE=:P_DELIVERY_ID=:P_TRIP_ID=:P_DELIVERY_LEG_ID=4497:P_ITEM_DISPLAY=D:P_ITEM_FLEX_CODE=MSTK:DebugFlag=N
Data Template Code: CUST_WSH
Data Template Application Short Name: WSH
Debug Flag: N
{P_DELIVERY_DATE_HIGH=, P_ORGANIZATION_ID=7907, P_TRIP_ID=, P_FREIGHT_CODE=, P_DELIVERY_DATE_LOW=, P_ITEM_FLEX_CODE=MSTK, P_ITEM_DISPLAY=D, P_DELIVERY_LEG_ID=4497, P_DELIVERY_ID=}
Calling XDO Data Engine...
java.lang.NullPointerException
     at oracle.apps.xdo.oa.util.DataTemplate.getDataTemplate(DataTemplate.java:379)
     at oracle.apps.xdo.oa.util.DataTemplate.<init>(DataTemplate.java:226)
     at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:283)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
0
Finished executing request completion options.
please help me out
Regards,
pavan

Above problem is solved.
but now i am facing one more problem
i intend to get output in pdf format
but i am getting in xml format
kindly help

Xml report output not producing for Request sets.

Hi,
I build a xml report which has basically a request set of 2 programs
1. the first program populates some staging table - pl/sql based program
2. the second program is an xml report that reports off the staging table
What is happening is that the second program loses the layout once submitted via request set. If you run them one by one it works fine but if you run them as a set and even enter the layout definition, it still doesn’t work and no output is produced.
Any ideas?
Please help!
Thanks,
Naresh

Hi Naresh
I think you may be better off amending your process slightly - rather than using a request set, submit the second request from the first. This way you will be able to use the fnd_request.add_layout function which sets up the layout template for the concurrent request. It's not perfect, but at least it works!

XML Report Flag definitions

Similar Messages

Maybe you are looking for