Work Order Basic Start Date and Basic Finish Date to be changed

Hi,
Currently the business creates work orders without specifying the work resulting which the start and fish dates on work order are same. Also we have automatic scheduling turned off. In spite of this If I am trying to manual modify the basic start and basic finish dates on work order it does not allow me to do so. This issue is seen with work orders which are Released whereas orders with status outstanding have no issues. Could anyone please let me know what could be the reason?
Thanks,
Vinay

Please check whether Scheduling type only capacity requirement is configured.
If yes, choose this scheduling type in order, you can able to change Basic start date & basic finish date.

Similar Messages

Process Order Basic Finish Date and Scheduled Finish Date

Folks,
I have a requirement from the business to be able to update the Process Order Basic Finish Date and Scheduled Finish Date independently from each other.
In other words, update the Basic Finish Date and the Scheduled Finish Date cannot change or update the Scheduled Finish Date and the Basic Finish Date cannot change.
I believe the reason for this is to be able to use the Basic Date to maintain the ATP accurately and keep the Scheduled Date to mark when the order was originally due from the shop floor to be able to measure if orders are being completed on time or late.
I have worked in tnx OPUZ and had some success with other issues with these dates but I can't seem to make them work independently from each other.
Or does anyone have any ideas how to measure proces order performance to the production schedule?
Thank you for your help,
Greg

Rajesha, thank you for your reply but it doesn't solve my problem.
Let me restate my scenario:
I start a process order and both the basic and scheduled finish dates are the same, June 1.
At some point, shop floor tells me they will be late and cannot deliver until June 15.
I need to update a date in the system so the ATP and the MRP planning runs have correct information for promising customers, I will update the Basic Finish date with June 15.
I also need to keep the original June 1 date in order to measure the shop floor performance to the production schedule to measure how early or late the order was delivered. How can I keep the original finish date or how can I measure if a process order is early or late??
Thank you for your help,
Greg

Planned order creation with PDS valid on only order start date and not finish date

Hi All,
We have requirement to allow creation of planned order manually if production version is valid on order start date and not finish date. This is because lead time of order is longer. I refered OSS notes 385602. I could find out solution for this is implementation of OSS note 694140 to change validity mode at activity level to consider start date of first produce activity in validity interval. Problem is even If I create order in APO by implementiong this note planned order is not transfered to ECC and it gets stuck with error production version not valid.
Is there any way in ECC to control this? Any config or customization?
Regards,
Santosh

Nilesh,
I think there is a simple procedural skip happening in your business process. You are right when a planned order is created after MRP it would default assign it to the first available production version. 2options available for us,
1. First use transaction MF50 and do the line loading and assign the quantites to the production versions/Production lines, so that the actual capacity planning is getting completed. This way you can have planned orders with both the production versions and matching to your actual line capacity.
2. Use Quota arrangement concept, to automatically split the Planned orders during MRP for a percentage based on individual production versions.
Now when backflush is performed S225 table is updated and Planned order qty also gets reduced.
Hope this helps....
Regards,
Prasobh

Basic start date and scheduled finished date...can we have Planned date?

Is there any "Plan Start Date" in SAP, the date where scheduler must put manually in the system to determine the "committed" date for the work to be executed - based on earliest and latest start date which automatically calculated by SAP?
Our plant must keep the Basic Finish Date unchanged since it is the Required Date of the Work to finish. We found that the Plan Date does not change and I was wondering if there is any way we can have the Planned date on the order header or have the basic finish date unchanged?
Appreciate your advices

Hi
As per your query screen variant is the better option to be choose so that here you can go with user id based restriction
Attaching the complete the scenario
Transaction and Screen variants with an Example
http://scn.sap.com/docs/DOC-39667
Try these document & try to configure if you have any further please revert back.
Thanks & Regards
Sandeep Kumar Praharaj

Early schedule start date, early schedule finish date

I want early schedule start date, early schedule finish date and project cost plan in my report. This is a PS requirement. In the standard cube (0PS_C02) I can find actual start date and actual finish date. Has anybody used early schedule start date and early schedule finish date in the reports? If yes then did you get it using standard cube/ODS or you went for enhancement?

HI,
He have to go for few tables in which u can find all the data.
Firstly u have to enhance the datasource .
First go to table AFKO here you insert AFUNR (Order Number) this table you will get AUFPL .
Then take AUFLP and go to AFVV table and insert AFUPL . you will get all the activites and all dates of each activity for example early start date ,early finish date, foirecost date etc.
Thanks and Regards
Dinesh

Earliest Start and Earliest Finish dates for Tasks

Hi experts,
Can anybody tell me in what table are the Earliest Start and Earliest Finish dates for tasks located? If no table is available does anyone know of a BAPI o function to obtain these dates?
Thanks and best regards,
Fernando

Hi Wendy!
Thank you so much for your explanation, we have done exactly what you mentioned in your post. In fact we are now using the SCHEDULED_START and SCHEDULED_FINISH instead of the PLANSTART and PLANFINISH.
OK so this is how it went:
In transaction SE11 we added the two fields in our append structure ZDPR_TS_DASHBOARD.
We added them just like they are named:
SCHEDULED_START type DPR_TV_SCHEDULED_START
SCHEDULED_FINISH type DPR_TV_SCHEDULED_FINISH
When doing so, it gave off a warning that SCHEDULED_START and SCHEDULED_FINISH are not customer fields and should have a YY or ZZ in front. I ignored the warning based on your advice and activated the append anyway.
So that´s how the append went.
Next on to the SPRO config:
In the define atributes part, SCHEDULED_START and SCHEDULED_FINISH are already defined as attributes, however I am not sure how the rest of the configurations should go, for example:
Attr.Type, Summarization Rule, Summ. Res, Init Vals., or Reference Attribute.
I left these values standard and didn´t modify anything in this part of SPRO.
Next I checked in the extract layout configuration in SPRO and verified if they were in the 0_Dashboard. It was there alright, but again I am not sure if I should flag any of the two flags in that configuration:
Always Extract and Calculate after Aggr.
I left them blank (standard).
In summary, I didn´t have to do any configuration in SPRO...
I went to the Tasks Dashboard in cProjects and the new columns keep coming with blank values...
What do you think Wendy? Am I still missing something?
Thanks again and regards,
Fernando

Early Start and Early Finish Dates for Completed Activities?

I am using P6 release 7 and having a problem with Early Start and Early Finish Dates for completed activities. For example, for an activity "A" the actual start date is 10-Oct-2013 and actual finish date is 19-Oct-2013, and activity is 100% completed but somehow P6 showing me the Early Start Date 02-Nov-2013 and Early Finish Date 02-Nov-2013. To me early start and early finish dates should not really be a matter for completed activities but I like to know why and how P6 calculates early start and finish dates for completed activities. Please let me know if somebody has an answer.
Thanks
Bilal Qamar

Does this activity have a resource assigned? If so, check if the resource is closed (expended) otherwise it may continue to reflect future possible progress based on unused resources.

Early Start and Early Finish Dates

When I build a schedule I always build it to early start and early finish dates. When I go to update my project the items that are finished always return a blank in the early start and early finish dates. Is there a way to get the program to still show the dates that the activities started and finished on in the early start early finish columns? I would like to be able to use the early start and finish columns instead of having to add more columns to be able to look back and see the start and finish dates for an activity that has already been completed.
Thanks,
Ryan Cherry

Does this activity have a resource assigned? If so, check if the resource is closed (expended) otherwise it may continue to reflect future possible progress based on unused resources.

Fixed start date and variable end date

I'm using Project 2010 Standard. Task A has already started. It can't end until 2 weeks after the completion of task B. The only way I can make Project schedule this task is by doing so manually, allowing Project to calculate the duration. But then if the
end date of task B changes, Project reschedules the entire task based on the duration without regard for the start date. If I add a % complete to task A, then the end date doesn't change if the end date of task B does. Project seems to fix the duration
once it's calculated. I need the duration to be flexible based on the fixed start date and the end date of task B. This project file is stored in SharePoint so I can't make task A a hammock task. I get the error "You cannot create links from a project
file that exists on a Web folder to another file" even though it's the same file. Any suggestions would be greatly appreciated.

WhoKnows,
I'm afraid without a hammock task the only way to do what you want is either with a manual reschedule or a macro to recalculate the duration of Task A when Task B moves.
Update: Okay, after playing around here is a little trick that might work.
1. Break Task A into two parts (e.g. -1 and -2)
2. Set the predecessor of Task A-2 to be finish-to-start with Task A-1 and finish-to-finish + 2w with Task B
Depending on the nature of Task A you may still need to do a little manual adjusting but it will effectively allow the start of Task A to be fixed and the finish to be variable depending on the status of Task B. Does that work for you?
John

What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

Unable to found Bucket start date and bucket end date in OFSAA 6

Hi,
How to find the Bucket start date and bucket end date in OFSAA 6.
I found following tables to mapped to Dim_Result_Bucket but unable to found columns pointing to Bucket Start Date and Bucket End Date.
Tables:
fsi_income_simulation_buckets
fsi_process_run_history
fsi_time_bucket_master
fsi_lr_irr_buckets_aux
fsi_m_alm_process
Kindly let me know the solution.

Hi;
Please check below link which could be helpful for your issue:
https://blogs.oracle.com/ebs/entry/service_contracts_warranty_created_by
Regard
Helios

Java.sql.Date and java.util.Date - class loaded first in the classpath

I had two jar files which has java.util.Date and java.sql.Date class file. i want to know whether which class is loaded first in the classpath...
I like to change the order of loading the class at runtime...
Is there is any way to change the order of loading of class...
I may have different version of jar files for example xerces,xercesImpl. some of the code uses xerces ,some of the code uses xercesImpl..i had common classes.
I like to load the class with the same name according to the order i need..
Can we do all these in Run time ?????

I had two jar files which has java.util.Date and
java.sql.Date class file. i want to know whether
which class is loaded first in the classpath...
I like to change the order of loading the class at
runtime...
Is there is any way to change the order of loading of
class...
I may have different version of jar files for example
xerces,xercesImpl. some of the code uses xerces ,some
of the code uses xercesImpl..i had common classes.
I like to load the class with the same name according
to the order i need..
Can we do all these in Run time ?????That is meaningless.
The classes you are referring to are part of the Java API. Third party jars have no impact on that. And you can't change to the order because java.sql.Data is derived from java.util.Date. So the second must load before the first.
And if you have two jar files with those classes in them (and not classes that use them) then you either should already know how to use them or you should stop trying to do whatever you are doing because it isn't going to work.

How to display planned movement date and actual movement date together?

Hi, Professionals,
My purpose is to list delayed outbound deliveries.
Anyone could tell me how to display planned movement date and actual movement date?
Appreciate your help.

Thanks Shiva.
I tried another way to do it. It works only for a short period of time.
By using VL06O, I list all outbound deliveries by limiting both planned goods movement dates and actual goods movements dates to the same week I would like to inspect. Say both from 7th/11 to 14th/11.
then I list outbound delivery list with planned goods movement date to 7th/11 but left out actual goods movements dates this time.
In excel, I compare those two lists and filter out those unique ones because those unique documents means delayed deliveries which cannot delivery according to planned date.
However, the "delayed" list generated by this method has some noises. Not all of documents are really delayed although most of them do.
I'm also looking for a way to list sales documents number of these delayed delivery documents so i can retrieve order details from it such as order value.
Help still needed.

Difference between "Database Variant To Data" and "Variant To Data"

Can anyone tell me the differnce between the 2 VI's "Database Variant To Data" and "Variant To Data"?
I am using the database connectivity toolset and making a query.
I have tried using both, but the give me the same result.
Attachments:
Variant to Data.JPG ‏45 KB

You won't see a difference between these two functions with just a string or other simple data types. Where you'll see a difference is with clusters and more complex data types that come from the database. The variants returned by databases can be slightly different than the standard variant. That is where the Database Variant To Data is needed. Otherwise, if you are just reading string information, either function will work fine.
Crystal

Using attribute as a set of data and parsing this data

Hi everyone,
I present below a (little) challenge with the use of attributes in XQuery. Consider the following XML document:
<showroom>
<car id="1">
<name>Clio</name>
<family>Renault</family>
</car>
<car id="n">
<name>Q5</name>
<family>Audi</family>
</car>
</showroom>
Each client of the showroom is identified by a unique Id (e.g., 1,2,3,....). Then, i want to add some data to my XML document which should represent, for each car, the set of all clients' Id that have rented this car.
The desired XML document could look like this:
<showroom>
<car id="1">
<name>Clio</name>
<family>Renault</family>
+*<history>*+
+*<client id="2"/>*+
+*<client id="23"/>*+
+*</history>*+
</car>
<car id="n">
<name>Q5</name>
<family>Audi</family>
+*<history>*+
+*<client id="56"/>*+
+*</history>*+
</car>
</showroom>
However, by using elements in order to represent the rental historic, the document's size will increase significantly.
As i use only the clients' id, are there any way to represent the history data using only attributes ?+.
In the following document, the clients' id are represented, as a set, through the attribute +@history+:
<showroom>
<car id="1" history="2,23">
<name>Clio</name>
<family>Renault</family>
</car>
<car id="n" history="56">
<name>Q5</name>
<family>Audi</family>
</car>
</showroom>
However, are there any way to check if a given car of id='x' has been rented by a client of Id='y' ?+.
Does someone know how to represent the history data (sequence of clients' id), using only attributes, and how to look for a given client's id as explained above ?
Please suggest. I appreciate your help.

The two following documents represent examples of the showroom data and the clients' data respectively:
First document:
<showroom>
<car id="1">
<name>Clio</name>
<family>Renault</family>
</car>
<car id="n">
<name>Q5</name>
<family>Audi</family>
</car>
</showroom>
Second document:
<clients>
<client id="2">
<name>...</name>
<firstname>...</firstname>
<driverLicence serialNumber="2156311"/>
</client>
</clients>
The DTDs of these documents are defined as follows:
The showroom DTD:
<!ELEMENT showroom (car)*>
<!ELEMENT car (name,family)>
<!ELEMENT name (#PCDATA)>
<!ELEMENT family (#PCDATA)>
<!ELEMENT N3 (#PCDATA)>
<!ATTLIST car id ID #REQUIRED>
The clients DTD:
<!ELEMENT clients (client)*>
<!ELEMENT client (name,firstname,driverLicence)>
<!ELEMENT name (#PCDATA)>
<!ELEMENT firstname (#PCDATA)>
<!ELEMENT driverLicence EMPTY>
<!ATTLIST client id ID #REQUIRED>
<!ATTLIST driverLicence serialNumber ID #REQUIRED>
Whenever a car is rented, I must add some information either in the same showroom document (it will be better for me) or in another document which relies rented car id with the id of the client which rented this car.
Thanks in advance for your help.

How to stop scheduled ship date and scheduled arrival date from defaulting to sysdate

Hello,
We have a business scenario where we are deriving scheduled ship date and scheduled arrival date outside and then imported in the instance with the order. However we find that the scheduled ship date and scheduled arrival date are defaulting to sysdate. The atp flag is set to N for these items. I have checked the defaulting rules, there is no such defaulting rule set for scheduled ship date or arrival date ( screenshot attached) Please share your thoughts on how can I stop scheduled ship date and arrival date date from defaulting to sysdate ?
Thanks
Rajesh

Hi
Please visit following link. It may be useful.
How to prevent auto default of schedule ship date in sales order form
HTH
sd

Work Order Basic Start Date and Basic Finish Date to be changed

Similar Messages

Maybe you are looking for