XML Status : 'Message recorded, commit missing"
Hi,
I am calling my proxy in a BADI. After triggering it, when I go and check in SXMB_MONI, the status of XML message is "Message recorded, commit missing". And it is in Scheduled status.
Could you please let me know, why this message will come, and how to make it run successfully.
Thanks,
Sandeep
I think you are gettking this error in transaction SXI_MONITOR in ERP system. As replied earlier by Divyesh, you need to write commit work statement in ur BADI after calling the proxy method.
If you test this proxy from transaction SPROXY, then also u will see this error with ur message and u need to trigger Commit work/Rollback explicitly to send message to central PI server. While testing ur proxy from SPROXY u can trigger Commit/Rollback from menu
Extras - > Trigger COMMIT WORK / Trigger ROLLBACK WORK
Similar Messages
-
Error in SXMB_MONI - "Message Recorded (Commit Missing)"
We have implemented BADI BADI_LE_SHIPMENT~BEFORE_UPDATE to call asynchronous proxy to send a message to PI system. This proxy is called inside a loop to send message for each delivery in the shipment. Some messages are successful and some are in scheduled status with error 'Message Recorded (Commit Missing)'. This error is coming only for particular interval and we dont see any PI outage at that time. And also we do not see any entries in queue(SM58, SMQ1, SMQ2). Searched in SDN, people are suggesting to use commit work after the proxy call but I am concerned to use commit inside a Badi. I have more than 1000 messages in production, can not reprocess all the messages manually from SPROXY. Please give me your suggestion to resolve this issue.
Hi,
If u want to manually unlock then u need to go to transaction SMQR,SMQ1,SMQ2 for queue management. There u have to select the queue and activated all entries.
SMQ1 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
U may schedule the report RSQOWKEX (Outbound Queues) and RSQIWKEX (Inbound Queues) to restart the queues automatically.
After that please register the queues via t.code sxmb_adm where u have an option manage ques.
Once you register the queues, they default activated.
Regards,
Pradeep A. -
Outbound Proxy - Message Recorded(Commit Missing)
Dear All,
The proxy's are configured correctly, and when tested the message getting created with status as Message Recorded(Commit Missing).
SLDCHECK transcation is also sucessfull!
No application Log exist at transaction SLG1!
What could be the reason for message not processed further?
Thanks & Regards,
Jilan BhashaDo the messages in ur ECC sxmb_moni show a green flag...oif so it a simple commit use..
Write this code at the end of your Proxy call -
Commit work.
regards,
arvind R -
Hi,
I am working on a scenario outbound from SAP Using Proxies :
When I check SXMB_MONI in R/3 the message has the status
Message Recorded(commit missing).
Can any one help me on this .
I guess we have to manage queues(SXMB_ADM).If so Please let me know how can i do.
Thanks,
Ravi PHi Udo,
Thanks ya.
I guess Commit work is not requried when we are working on the synchronous proxies.Correct me if i am wrong.
Ravi P -
Delete messages stuck in status 12, Recorded for Outbound Processing
I am on a PI 7.10 SP8 system. I have 59,000 XML messages showing in status 12 ( Recorded for Outbound Processing) that I would like to just delete or cancel. These have accumulated over several days of testing interfaces. If I have to allow them to be processed, that would also work but is not needed. I have read about 6 different forum threads and tried several things but nothing has worked yet. <br>
The messages can not be cancelled from SXMB_MONI. <br>
The queues are no longer showing in SMQ2. <br>
I have tried restarting and re-registering the queues. <br>
I've tried RSXMB_RESTART_MESSAGES and RSXMB_CANCEL_MESSAGES. <br>
SWPR & SWPC show nothing to restart. <br>
Any ideas on something else to try? <br>Hi,
You can try to delete or archive mesages. use following links.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50
Delete Messages SXMB_MONI
http://help.sap.com/saphelp_nw04/helpdata/en/0e/80553b4d53273de10000000a114084/frameset.htm
Too many questions on Archive/Delete messages.
Inder -
Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing" don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?
#1
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
#1.1 n/a because the errror message overrides it
#2 see #1
#3 iOS: Device not recognized in iTunes for Mac OS X
But could be caused by #1
#4 Covered by previous ones
#5 Obvious jpegs are photos and thus will not sync as videos. Also see:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
#6 iOS: If you can't back up or restore from a backup in iTunes
First #7 See #6
Second #7 You have so many other problems resolve those first
#8 Resolve other problems first -
I get a message that say: ITunes could not connect to IPhone *** because the pairing record is missing" I never saw this before anyone know about this??
Do you still get that one if you restart the PC and try to connect again?
-
Message Mapping from flat XML to a Record structure
Hi All,
We have a scenario in which the input message is a PDF document. we are following below the blog to convert PDF to XML format which uses <b>PDF box utitlity</b>.
/people/sap.user72/blog/2005/07/31/xi-read-data-from-pdf-file-in-sender-adapter
We are able to convert the PDF doc to a flat XML file.
Now we have the following queries...
what are the different ways to map the flat XML to our record structure?
Do we have any utitlity in PDF box to do that?
Regards,
Rakesh.Hi Rakesh,
You have Graphical mapping, Java mapping, ABAP mapping and XSLT mapping. The choice depends on the scenario and what target result you require.
<b>Message mapping using graphical mapping editor:</b>
http://help.sap.com/saphelp_nw04/helpdata/en/49/1ebc6111ea2f45a9946c702b685299/frameset.htm
<b>XSLT mapping:</b>
http://help.sap.com/saphelp_nw04/helpdata/en/73/f61eea1741453eb8f794e150067930/frameset.htm
<b>Java Mapping:</b>
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/frameset.htm
<b>ABAP mapping:</b>
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/frameset.htm
As said earlier, graphical mapping is the simplest and quite a few built in options are available with it, explore it and see which is suitable for your scenario.
Regards,
Chandra -
After installing ios6 to ipad2 I no longer it went back to factory settings. I cannot sync iTunes on my computer with the iPad but get a message "pairing record is missing". Can anyone help me.
I need to uninstall my old version on itunes and install a new version, i cant uninstall from Programs and Features, a message keeps coming up saying 'The feature you are trying to use is on a network resource that is unavailable.'
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
New IPad error message when connecting to Itunes: Pairing record is missing
Pairing Record is missing and Itunes can not connect to my ipad. How do I resolve?
These directions should help you: http://computerknowhow101.com/iso/a-fix-for-pairing-record-missing-error
-
Inbound Processing of iDoc Status Message
Silly me - I thought this would be simple ...
I am currently changing our bank interface from a customized ABAP solution to use more standard SAP utilities (particularly iDocs). I have the configuration set up to use the PAYEXT message type sending PEXR2002 iDocs to a file port. Our bank is receiving these documents and is returning an iDoc status message containing the status of each payment iDoc that they received from us.
My problem is that I can't figure out how to get these status iDocs to update the status of the corresponding PEXR2002 iDoc.
I am trying to execute an RFC interface to apply these status messages to my system using the following OS command:
D:\usr\sap\VPR\SYS\exe\uc\NTAMD64\startrfc.exe -3 -d RT2 -u xxxxxx -p xxxxxx -c 220 -h SPR32K36 -s 00 -F EDI_STATUS_INCOMING -E PORT=ZFI_INT003
The error message that I receive when this is run is:
RFC Call/Exception: SYSTEM_FAILURE
Group Error Group 104
Key RFC_ERROR_SYSTEM_FAILURE
Message Status record 1 is invalid (TABNAM: 'EDI_DC40')
The port (ZFI_INT003) is the file port that is configured for the outbound file. in WE20, this port has the "Status File" tab set to use the logical file name where the status file is being stored on the server. the startrfc command is connecting to the SAP system and opening the status file. I'm not sure where I'm going wrong here.
Can someone please help get me pointed in the right direction? I've obviously missed something here.
Thanks,
GlenHi,
call function modules:
EDI_DOCUMENT_OPEN_FOR_PROCESS
EDI_DOCUMENT_STATUS_SET
EDI_DOCUMENT_CLOSE_PROCESS
kind regards,
HP -
Problems with 'COMMIT MISSING' - when using ABAP client proxies
Hi
We have a requirement - wherein while SAP std inbound IDOCs are being processed in the R/3 system- we need to monitor the processing of idocs - by sending relevant information out of the R3 system to a monitoring dashboard - outside of the R/3 environment.
Inorder to accomplish the above, we generated a async. client proxy class in the R3 system by pointing to a XI o/b message interface and that interface mapped on to DB calls - from which the dashboard was bringing up status of idocs being processed in R3
We made a call to the async class method from within the idoc user exit that lies within IDOC_INPUT_ORDERS FM . The user exit chosen to make the call was - after the salesorder processing for the inbound idoc was done in the above FM. We have not given any COMMIT WORK statement after the async client proxy method call within the user exit - since the call was being made from within user exit and we did not want to upset SAP std processing flow.
Now, when the inbound idoc processing is being done by using SAP std program rbdapp01 using parallel processing option of packets, the outbound message generated is in 'COMMIT MISSING' status - whereas - when rbdapp01 is executed in normal mode - the proxy message is sent out ok out of the R3 integration engine.
The program rbdapp01 has a COMMIT WORK statement after each IDOC packet is processed - but still with the parallel processing option - the proxy message stays in th R3 box - with the status 'COMMIT MISSING'
Any thoughts/ pointers on this is appreciated....Hi Karthik,
I don't think you can get this to work using an asynchronous proxy - except perhaps by spawning an update task to send the data.
Perhaps you can re-cast this as a synchronous interface?
Regards,
Thorsten -
About OGG-01028 recovery record is missing error
Hi! everybody,
My enviroment is :windows server 2008 64bit ,oracle 11GR2,goldengate 11.1.1.1.I often meet the error :ogg-01028 recorery record is missing .
In mos,I found the relative article((Doc ID 1094767.1)
In this Document
Symptoms
Cause
Solution
References
Applies to:
Oracle GoldenGate - Version: 10.4.0.19 to 11.1.1.1.0 - Release: 10.4.0 to 11.1.1
Information in this document applies to any platform.
Symptoms
Extract abended with:
2010-05-04 15:42:23 GGS ERROR 190 Recovery record is missing from log with seqno 14496 when extract has reached log with seqno 14497, block size 512, and next_checkpoint RBA at 149274704.
in later OGG version, the error code is like following:
OGG-01028 Recovery record is missing from log with seqno 1934 when extract has reached log with seqno 1935, block size 512, and next_checkpoint RBA at 83962348.
Archive logs 14497 & 14498 exist, and restarting extract failed with same error.
Cause
The extract was manually stopped and current/next checkpoint is set to a zero length record in redo. This is a very rare condition, and the chance of hitting it is also low. When this extract was restarted, the error occurred. Extract's Current/Next checkpoint is set to a zero length record at the end of a log and on restart this zero length record is skipped as it has no useful data. Since this record is skipped the recovery code thinks this record was missed and generates an error.
This is bug 12693183, 12693291.
Solution
This bug is fixed in v11.1.1.1 with patches for bugs 12693183, 12693291.
The following workaround may also be used with no data loss.
Workaround: change the current checkpoint RBA to next block boundary, keep the recovery checkpoint the same
1. Get block size of your platform.
The block size is shown in the error message.
2010-05-04 15:42:23 GGS ERROR 190 Recovery record is missing from log with seqno 14496 when extract has reached log with seqno 14497, block size 512, and next_checkpoint RBA at 149274704.
For reference the following lists the block size of major platforms:
AIX, Linux, Sun, Windows & VMS: 512 Bytes
HP-UX, Tru64: 1024 Bytes
S390, MVS: 4096 Bytes.
2. Backup the checkpoint file in directory dirchk
3. info <ext> showch
Get current and recovery checkpoints, example:
EXTRACT EIDLD Last Started 2010-05-04 16:39 Status ABENDED
Checkpoint Lag 01:14:54 (updated 01:14:41 ago)
Log Read Checkpoint Oracle Redo Logs
2010-05-04 15:24:21 Seqno 14496, RBA 149274704
Current Checkpoint Detail:
Read Checkpoint #1
Oracle Redo Log
Startup Checkpoint (starting position in the data source):
Sequence #: 14496
RBA: 149273104
Recovery Checkpoint (position of oldest unprocessed transaction in the data source):
Sequence #: 14496
RBA: 149273104
Current Checkpoint (position of last record read in the data source):
Sequence #: 14496
RBA: 149274704
4. Alter both recovery checkpoint and current checkpoint to the start point of next block number
alter <ext>, extseqno <seq#>, extrba <rba#>
In the above example:
SQL> select ceil (149274704/512) * 512 from dual;
CEIL(149274704/512)*512
149275136
seq# remains the same as in the showch display.
ggsci> alter extract <ext>, extseqno 14496, extrba 149275136
If the new rba number is bigger than the current file size of the archivelog file, you have to alter both checkpoint to start from RBA 0 in next seqno file.
For example, if the size of archived log that has seqno 14496 is only 149275000, which is smaller than the new RBA calculated, 149275136, you have to issue the following command
ggsci> alter extract <ext>, extseqno 14497, extrba 0
5. Alter the extseqno and extrba of recovery checkpoint back to its original recovery checkpoint position
In this example,
ggsci> alter extract <ext>, ioextseqno 14496, ioextrba 149273104
6. info <ext>, showch
Confirm the change.
7. start <ext>
Note: Above example is for extract without threads option. For extract with threads option, "thread <thread#>" is needed for "alter extract " command.
e.g., "ggsci> alter extract <ext>, extseqno 14497, extrba 0" will be "ggsci> alter extract <ext>, thread <n>, extseqno 14497, extrba 0" (here, <n> is the ogg thread number).
My question is :This bug is fixed in v11.1.1.1 with patches for bugs 12693183, 12693291.My goldengate version is 11.1.1.,is it need any patch to avoid the error?If the patch can not resolve the problem ,can I use some utilities ,such as logdump,logmnor to find the relative sql detail when the extract abends.Well, you have the seqno and RBA (where extract abended, on a zero length record). You could assume that the record before was good to go, and that should give you an idea of the relative SQL. You could also get down and dirty with Logminer, using the SCN as a starting point to find the last good record shown in the trail.
-
Reporting Services Point status message errors.
My Reporting Services Point seems to work OK -all reports are available and run correctly both through the console and via the website. However, I am seeing the following warning in the SMS_SRS_REPORTING_POINT status messages every hour:
"The SQL Reporting Services datasource on Reporting point server "Databaseserver.contoso.com" is missing or has been changed outside of Configuration Manager. It will be rebuilt based on the RSP configuration."
Here's what I think is causing the issue, but I don't know how to solve it.
The reports database is on the same remote SQL server as my site database. Because these site systems were installed automatically through the SCCM installation process, they show up in the Servers and Site Systems Role without an intranet FQDN. However,
when I add the RSP to the database server, it creates a new entry because when manually adding site systems SCCM insists on automatically adding the intranet FQDN. So I now have two separate entries for the same server:
\\DBServer01 - component server, site database server, site system
\\DBServer01.contoso.com - component server, reporting services point, site system
Any thoughts on how to stop these errors?Yes, I know this is an old post, but I’m trying to clean them up.
In the past when I have seen this, they will automatically clean themselves up after a few days. (aka up to a week later). Have it clean itself up yet?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Hello, I'm totally new to programming. I started with LabView and test stand to make some test as VI's. When test stand secuence ends, the batch result box (batchmodel.seq) pops out for the several uut's tested in every socket. I'd like to add to the status message the information fo the test wich failed instead of searching this info in the xml (or html) report.
Joel Urbaez
Test Engineer ,
Napco Alarm Lock Intl. Group.Hi Joel:
Every report in TestStand comes with message on top of the report (below the header) that tells you which step in the sequence caused the failure. Hence, you do not need to read through the entire report to get this information. If you still want to use the banner to report this information you can do the following:
1. After the sequence has executed you will have to add a step in the Post-UUT sequence.
2. Here you can either choose to show a message popup where you can display the step that failed
3. You would have to use the following variables:
If ( RunState.Sequence.Locals.ResultList[0].Status = "Failed") ? RunState.Sequence.Locals.ResultList[0].TS.StepName
4. You can also try to modify the modelsupport2.dll file for the functions that bring up the popup banner to add more information.
Thank you
Nandini
NI
Maybe you are looking for
-
Unable to upload video files via iframe in safari version 3.0
I m not able 2 upload video files via iframe in safari 3.0. i m facing this issue when i try 2 upload a video file via an iframe. file gets uploaded properly if i m not using iframe to upload the same. this issue is seen only in safari version 3.0 an
-
How can i transfer movies from my windows laptop to ipad 3
how can i transfer movies from my windows laptop to ipad 3
-
I have Lion 10.7.2 and use Safari 5. When I get online and open a website, then go to a new website Safari will take me right back to the previous site automatically. I have reset Safari and there is not an issue with the interenet access. Went to
-
How to get the number of pages when assemble pdf with DDX
Hi, I have tried to add two bookmarks to one pdf with DDX(in java code), the first bookmark I shall add to the first page,and the second I shall add to the second page.... the question is: If the pdf has only one page, I will not a
-
Mount iPhone as a volume (same as possible with iPods)
Hi everyone, I suppose there's no official way of mounting the iPhone as a volume on the Mac. Are there any 3rd party apps that do this or is the only way to accomplish this to jailbreak it and use ftp, scp, etc? Thank you Björn