XMLConnector with Czech characters in the URL

I'm writing a game that use the XMLConnector object to bring local xml data into a DataSet object. My URL is, for example: data/quiz.xml. I have everything working well. But I'm localizing my game for Czech and Russian and when the game is installed to a path with Czech specific (high ascii) characters, the data import fails. This is strange because the relative path (data/quiz.xml) doesn't change. For example, my Czech install path contains the partial path: Vyšetřit Bobíčka. If I just use normal English characters for this, I don't have a problem. The swf is an embedded sprite in a Director game, but I don't think this is relevant.
I looked into using fl.mapPlayerURL to format the path as UTF-8 but it doesn't look like this is the solution. Another thing I thought of would be embed the xml data inside Flash and copy it to a temp folder when needed. I'm using AS2.
Any solutions or suggestions?
Thanks in advance,
Brian

I've already solved this with Valentin's help. I just convert the full XML
file path to a DOS 8.3 path with baShortFileName and pass that to the Flash
sprite. It could be that CS4 or another work around will fix it also.
Barring a complete rewrite, the XML files need to be external. That's the
way the Flash object works as far as I know.
Thanks,
Brian

Similar Messages

Issue with Czech characters in PDFs generated from RSTXPDFT4

Hi,
We have a requirement to generate PDF documents from the spool of the Billing document outputs in our project.
For this we are using the standard program RSTXPDFT4, which converts the SAP script OTF to PDF format.
But the Czech characters in the billing document output are not getting displayed in the PDF generated out of it.
We are already using a device type I2HP4 when creating the print request , which supports Latin-2 Character set ( ISO 8859-2 ), to which the special characters
of East European languages belong.
Even then , the czech characters are not getting displayed in the PDF generated.
We have raised a message to SAP for this, and SAP informed us that currently the only solution to this is to use Latin 2 soft fonts,
and to upload these soft fonts into R/3 System using report RSTXPDF2 as they contain the Eastern European special characters plus all the other characters in ISO 8859-2.
But, since character font definitions (font files) are protected by copyrights, SAP informed us that they cannot provide these font files and we have to acquire
these latin-2 font files by searching in search engines in the internet.
If anyone has the information where we can get these "Adobe type 1 Latin-2" font files with '.PFB' extension, for the proper display of Czech characters, please let me know.

Hi,
Did you or anyone manage to find a reasonable solution for this issue?
I'm currently facing something similar but with Polish characters instead.
I tried using RSTXPDF2 to upload .PFB and .TTF files but to no avail.

Double Byte Characters in the URL

Hi
I am working on a sample code that uploads and file and lists the file after upload as a link. Users can download files by right clicking on the filename(link) and use the browser's options to download the file.
I am having problems with files that have japanese/chinese characters in the file names. These are shown with junk characters in the list and when the user clicks on them to save them, I am not able to translate the url to point to the actual file.
For eg: URL to the file with japanese characters look like this http://hostname/downloads/��.txt
When I try to access this URL I get a 404 exception which is due to the special characters
Can someone direct me in this context
Thanks
Rajesh

Rajesh,
Did you find a solution for this problem?
Thanks,
Hemanth.

Application Hudba (Music) problem with Czech characters

Hello,
I have problem with Czech characters for Music files copied into application "Hudba" all Czech letters (š,č,ť...etc.) are translated into Japonies letters (which I could not read at all). Could someone help please.
Thanks

You might to consider contacting the app developers http://talk.sonymobile.com/t5/Music/Walkman-Beta-Test/m-p/953659#U953659

When i send an email with greek characters in the body, the recipient receive it in an unreadable form.

When i send an email with greek characters in the body, many recipients (not all) cannot read it.
At the same time when i use the internet mail it can be read successfully by the recipient.
I have already checked the encoding settings in the Fonts in order to be "unicode (UTF-8)".
What else can i check?
Thanks in advance.
e.g:
From: Eleni Kontomari [email address removed by moderator Andrew]
Sent: Thursday, February 27, 2014 12:33 PM
To: "Nikos Totsios (Ηλεκτρονική διεύθυνση)"; "Giannis Diokarantos (Ηλεκτρονική διεύθυνση)"; "Dimitris Papadopoulos (Ηλεκτρονική διεύθυνση)"; Vassilis Gounaris; "Vassos Efthymiadis (Ηλεκτρονική διεύθυνση)"; Νικηφόρος Κεκρίδης; Ιωάννης Αθανασόπουλος; "Alexis Katsivas (Ηλεκτρονική διεύθυνση)"; Μιχάλης Παπαοικονόμου; Fomesa Hellas; "Χρήστος Σπηλιάδης (Ηλεκτρονική διεύθυνση)"; Δημήτρης Μπενάκης; "Ν. Γαλάνης"; [email protected]; "Αποστόλης Σαμούδης (Ηλεκτρονική διεύθυνση)"; "Β. Ντουρτόγλου (Ηλεκτρονική διεύθυνση)"; [email protected]; [email protected]; "Φοίβη Λεγάκι (Ηλεκτρονική διεύθυνση)"; "Παναγιώτης Κουμεντάκος (Ηλεκτρονική διεύθυνση)"; Σπύρος Ζαφείρης; Hans- Joachim Henn; "Κώστας Αλεξανδρόπουλος (Ηλεκτρονική διεύθυνση)"; [email protected]; [email protected]
Subject: ΠΡΟΣΚΛΗΣΗ ΤΑΚΤΙΚΗΣ ΓΕΝΙΚΗΣ ΣΥΝΕΛΕΥΣΗΣ ΕΣΥΦ
... 13 2014.
''Please read [[Forum rules and guidelines]] when posting a question in a public forum''

There are some language add ons that support emails from other languages that you can check out: [https://addons.mozilla.org/en-us/thunderbird/extensions/language-support/?sort=popular]
The recipient, if they also use thunderbird may need to have a language pack to read the email: [https://addons.mozilla.org/en-US/thunderbird/language-tools/]
You may also need to have them check their interpreter to make sure the email is being received in the same format it is being sent.

HT2506 hi i can't seem to copy and paste pdf files from preview to a microsoft word document. it always comes up with nonsense characters in the word document. how do i fix this? thanks in advance

hi i can't seem to copy and paste pdf files from preview to a microsoft word document. it always comes up with nonsense characters in the word document. how do i fix this? thanks in advance

Hi,
The quickest way to do this (tested with OS 10.8.2, MS Word 2011) is in one line:
tell application "Microsoft Word" to close every document whose name begins with "book"
The reason why your script doesn't work is that you aren't specifying to Word which document you want it to close.
So, changing one line ought to do it:
close document incrementvalue -- instead of "close document"
But... when you close a document, you change the document count. Document 2 becomes document 1, document 3 becomes document 2 etc. So eventually you'd get a message saying "The object you are trying to access doesn't exist".
Because of this, if you want to do it in a repeat loop, you have to work backwards:
tell application "Microsoft Word"
set doc_count to count documents
repeat with x from doc_count to 1 by -1
if name of document x begins with "book" then close document x
end repeat
end tell
Hope this helps.

Etting support through this site is terrible. Having said that I have been trying to access the store in order to order PS CC and I have been unable to connect. I have an internet connection that works with everyone else. The URL comes up in the browse

Getting support through this site is terrible. Having said that I have been trying to access the store in order to order PS CC and I have been unable to connect. I have an internet connection that works with everyone else. The URL comes up in the browse window and the address simply hangs. This has been going on for the past three hours.

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-and try some steps such as changing browsers and turning off your firewall for downloads
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
Mac Spinning Wheel https://forums.adobe.com/message/5470608
-Similar in Windows https://forums.adobe.com/message/5853430

Reader does not link to a web page with a tilde in the url

We have a PDF with a link that includes a tilde character (~) in the url link. When we open the PDF in Adobe Reader X (Mac or Windows) and click on the link in the PDF, it goes into the web browser and does not find the web site. If we use Acrobat Pro 9 or X, clicking on the link will navigate to the web page correctly. Basically what I see is the Tilde character is mapped to %257E instead of staying a Tilde (~).
Has anyone else seen this issue?
Thanks for your response.

See also http://forums.adobe.com/thread/1133628

SQL Server Reporting services. failed to establish connection with project server. verify the url is correct.

Dear All,
I'm working on reporting of Project Server 2010, while configuring SQL SERVER REPORTING SERVICES faced issue after two complete days of troubleshooting along with this gone through plenty of forums, unable to figure out any solution. So finally posting on
technet in order to find solution.
ISSUE/PROBLEM:
At initial configured the SQL REPORTING CONFIGURATION to sharepoint integrated database (SQL SERVER is installed on seperate machine), change the service to Domain Account and also installed sharepoint add in on server story was fine at this point. Furthur
moving to SHAREPOINT ADMIN console and while configuring the Sharepoint Integrated Reporting continuously facing this error:
Failed to establish connection with report server. . . . (Snapshot is attached for your further reference).
My point of concern is that whenerver i try to open the REPORT SERVER URL on project server machine it prompts me to enter username and password but whenever i insert the domain credentails it didnt accept though it can be accesible by using the credentials
of Local Admin of sql server machine. So i wana come to know whether its permission issue if yes then where i should mention the domain credentials.?
REGARDS DANISH DANIE

Dear Paul,
I am able to open the URL (http://psdb/ReportServer )using
domian credential and page open with these contents
Reporting Services Error
The configuration parameter SharePointIntegrated is set to True but Share Point Object Model cannot be loaded
Second,
Configured the SPN on domain controller , performed the steps required to change the AUTHENTICATION in rsreportserver.config
file also done the registry settings to disable the loop back settings.
Same error still ! .... what should i do now ???
REGARDS DANISH DANIE

Bookmark a page with username/password in the URL

I can add username/password for HTTP authentication directly to the URL (e.g. http://user:[email protected]/ ) and this works fine with the browser on Firefox OS 1.3 (on a ZTE Open C). However, when bookmarking that page, the bookmark doesn't include the username/password any more and so I'll have to manually enter the username/password when visiting that site again (after clearing private data) - and unfortunately there is no password manager for Firefox OS yet...
Another way to add a bookmark appears to be via a small Javascript using the "save-bookmark", however that appears to only give me the option to add the bookmark to the Home Screen (and I am not sure if it will keep the username/password information in the bookmarked URL).
Is there any other way to add a bookmark to the browser and keep the username/password information in the URL?

Here is an example:
http://user1:[email protected]/auth-basic/
Works fine if you enter that URL in the URL bar. But when bookmarking it, it only gets bookmarked as http://test.webdav.org/auth-basic/ and so you will have to enter username and password again (after clearing cookies and session data) when opening from bookmarks.

Mac: Problems with certain characters in the editor

I have now downloaded the production version on my Mac and it runs just fine. The first thing I see is that the painting problems with the close icons etc. have been fixed. Thank you for that. But I still have trouble typing certain characters in the editor. I haven't reported that yet, but I have seen others report similar problems caused by missing support for international keyboards. The characters that I cannot type are |\[{]} which is pretty annoying when you're writing Java code. :-) It works fine in normal Java text fields. On my Norwegian keyboard I normally input all these characters by typing 7 and 8 combined with option or option + shift.

Check if database characterset supports these special characters
check client's nls settings.
check client machine's language settings (converts characters in driver level)

Sorting of contacts with foreign characters in the name

Hello,
I have a large address book, some with Japanese characters in their name.
I'm on English Language setting for the OS on my iphone and ipad.
All the contacts with Japanese characters in their name seem to get pushed to the # section of the alphabet rather than at the equivalent roman alphabet letter.
Also note that adding the Japanese name in the secondary fields of "phonetic first" and "phonetic second" of an existing Roman English based contact sends this to the # section.
This is poor sorting of contacts.
Very poor....

After posting this I found a solution. I hadn't tried it this way round.
https://discussions.apple.com/message/7589528#7589528
Go into one of your Japanese contacts and click edit.
Go right to the bottom of the edit page and add field, add phonetic first name, then repeat the step to add phonetic last name.
Now edit the name of your contact, keep their name in Japanese and enter the phonetic spelling in English.
Smashin.... :-)

HTTP destination type G with scpecial characters in the path prefix

Hi guys,
I am having an issue with a RFC destination type G in a ECC 5, the HTTP service that I am trying to use is asking me for an authentication that needs to be embeded on the Path prefix, the user has an "@" and the pwd also contain a special character "!". So the complete uri that I want to access is in the form of https://server:443/path?user=MyUser@MyDomain.com&password=MyPwd! when I tried in my web browser I got authenticated but when I put the information in the RFC destination in the form described below I am not able to authenticate and I am getting an error of Unauthorized.
Target Host: server
Service: 443
Path prfix: /path?user=MyUser@MyDomain.com&password=MyPwd!
Logon procedure: No logon
SSL: Active
I also have tried with the basic authentication but I am still not able to authenticate.
I think the issue is the "@" in the user: MyUser@MyDomain.com , I also have tried replacing the "@" for "%40" and still not working.
Do you know how I can pass this special character?
Do you think it can be something else that it doesn't let me authenticate to the server?
My system is a non unicode ECC 5, SAP_Basis 640
Thanks
Omar Hernandez

Hi Mark,
Thanks for your response, the HTTP service that I am trying to access is not accepting a basic authentication but it is getting the authentication info from the parameters in the URL. Anyway I also have tried to use basic authentication but it is not working.
Regarding SMICM, I havent seem anything useful, maybe the just the "BINDUMP of content denied" string but I am not sure what does this mean.
[Thr 1076382016] IcmHandleNetRead(id=91/11638): pending SSL data: 0, rollout=0
[Thr 1076382016] <<- SapSSLReadPending(sssl_hdl=0x2aaaaf53f380)==SAP_O_K
[Thr 1076382016] out: pendlen = 0
[Thr 1076382016] NiIPeek: peek successful for hdl 79 / socket 46 (r)
[Thr 1076382016] <<- SapSSLRead(sssl_hdl=0x2aaaaf53f380)==SAP_O_K
[Thr 1076382016] result = "max=65312, received=88"
[Thr 1076382016] IcmReadFromConn(id=91/11638): read 259 bytes(timeout 250)
[Thr 1076382016] BINDUMP of content denied
[Thr 1076382016] PlugInHandleNetData: role: 2, status: 2, content-length: 0/88
##buf_len: 259, buf_offset: 171, buf_status: 0, conn reused
[Thr 1076382016] PlugInHandleNetData: read response body (len=88/88)
[Thr 1076382016] PlugInHandleNetData: response completely read(EOS=0)
[Thr 1076382016] IcmFlushBuf: Flushing 259 Bytes, buf_status: 6
[Thr 1076382016] flush buffer with mpi buffer id 10
[Thr 1076382016] MPI<1e8c9>1a#5 FlushOutbuf l10 1 1 1c14e8 311 6 -> 0x2b4bc7cd64e8 0
[Thr 1076382016] IcmConnRollInWP: no need to roll in WP status: ROLLED IN
[Thr 1076382016] PlugInHandleNetData: keep connection
[Thr 1076382016] IcmPlCheckRetVal: Next status: WRITE_REQUEST(3)
[Thr 1076382016] IcmHandleNetRead(id=91/11638): read_len: 88, HandleNetData returned: 3
[Thr 1076382016] IcmConnRollInWP: no need to roll in WP status: ROLLED IN
[Thr 1076382016] IcmWorkerThread: Thread 4: Waiting for event

Safari problems after upgrade. Search engine becomes locked with lock icon before the Url

SInce last upgrade to ios8 Safari freezes with a lock icon in the URL box.

Hi ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

Problem to get file with special characters in the message

Hi, I'm developing an application that read the email and save the attached file. However, some files have special characters in the name, like: Documento de EspecificaÇÂO.doc
I noticed the de name of the file in de message head is:
"=?iso-8859-1?Q?Documento_de_Especifica=E7=E3o.doc?="
I'm already using the JavaMil 1.4.5
Tha is my code:
package br.com.cesan.helpdesk;
import java.io.BufferedInputStream;
import java.io.BufferedOutputStream;
import java.io.File;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.util.Properties;
import javax.mail.Flags;
import javax.mail.Folder;
import javax.mail.Message;
import javax.mail.MessagingException;
import javax.mail.Multipart;
import javax.mail.Part;
import javax.mail.Session;
import javax.mail.Store;
import javax.mail.search.FlagTerm;
public class LerEmail2 {
     * @param args
     * @throws MessagingException
     * @throws IOException
     public static void main(String[] args) throws MessagingException, IOException {
          // TODO Auto-generated method stub
          // Get session
     Session session = Session.getInstance(new Properties(), null);
     // Get the store
     Store store = session.getStore("pop3");
     store.connect("pop.xxxxx.com.br", "user", "password");
     Folder folder = store.getFolder("INBOX");
          //folder.open(Folder.READ_ONLY);
          folder.open(Folder.READ_WRITE);
          // Show only unreaded Messages
          FlagTerm ft = new FlagTerm(new Flags(Flags.Flag.SEEN), false);
          // Get directory
     Message message[] = folder.getMessages();
     //Message messages[] = folder.search(ft);
     for (int i=0, n=message.length; i<n; i++) {
          System.out.println(i + " - "+ message.getSubject() +" - " + message[i].getSentDate() );
          Object content = message[i].getContent();
          if (content instanceof Multipart) {
     handleMultipart((Multipart)content);
     } else {
     handlePart(message[i]);
     // Close connection
     folder.close(false);
     store.close();
     public static void handleMultipart(Multipart multipart) throws MessagingException, IOException {
          for (int i=0, n=multipart.getCount(); i<n; i++) {
               handlePart(multipart.getBodyPart(i));
     public static void handlePart(Part part) throws MessagingException, IOException {
          String disposition = part.getDisposition();
     String contentType = part.getContentType();
     if (disposition == null) { // When just body
          System.out.println("Null: " + contentType);
          // Check if plain
          if ((contentType.length() >= 10) && (contentType.toLowerCase().substring(0, 10).equals("text/plain"))) {
               part.writeTo(System.out);
          } else { // Don't think this will happen
               System.out.println("Other body: " + contentType);
               part.writeTo(System.out);
     } else if (disposition.equalsIgnoreCase(Part.ATTACHMENT)) {
          System.out.println("Attachment: " + part.getFileName() + " : " + contentType);
          saveFile(part.getFileName(), part.getInputStream());
     } else if (disposition.equalsIgnoreCase(Part.INLINE)) {
     System.out.println("Inline: " +
     part.getFileName() +
     " : " + contentType);
     saveFile(part.getFileName(), part.getInputStream());
     } else { // Should never happen
     System.out.println("Other: " + disposition);
     public static void saveFile(String filename, InputStream input) throws IOException {
          if (filename == null) {
               filename = File.createTempFile("xx", ".out").getName();
          // Do no overwrite existing file
          File file = new File(filename);
          for (int i=0; file.exists(); i++) {
               file = new File(filename+i);
          System.setProperty("file.encoding", "iso-8859-1");
          FileOutputStream fos = new FileOutputStream(file);
          BufferedOutputStream bos = new BufferedOutputStream(fos);
          BufferedInputStream bis = new BufferedInputStream(input);
          int aByte;
          while ((aByte = bis.read()) != -1) {
               bos.write(aByte);
          bos.flush();
          bos.close();
          bis.close();
The problem occurs in:
FileOutputStream fos = new FileOutputStream(file);
BufferedOutputStream bos = new BufferedOutputStream(fos);
BufferedInputStream bis = new BufferedInputStream(input);
int aByte;
while ((aByte = bis.read()) != -1) {
bos.write(aByte);
Thanks
Edited by: user10283976 on 30/03/2012 07:36
Edited by: user10283976 on 30/03/2012 07:37
Edited by: user10283976 on 30/03/2012 07:37
Edited by: user10283976 on 30/03/2012 07:38
Edited by: user10283976 on 30/03/2012 07:40
Edited by: user10283976 on 30/03/2012 07:41
Edited by: user10283976 on 30/03/2012 07:42

http://www.oracle.com/technetwork/java/javamail/faq/index.html#encodefilename

XMLConnector with Czech characters in the URL

Similar Messages

Maybe you are looking for