Xperia l restarts when using Walkman app with internal speaker

Hi recently I updated my xperia l to 15.3.A.1.14.
But after that whenever I start playing songs without headset my phone shutdown and restarting. Is there any solution for this issue. Anybody please help to fix this problem.
Solved!
Go to Solution.

try
setting>apps>all>walkman> clear data and cache force stop and reboot your phone
and
setting>apps>all>smart connect> do the same as walkman then reboot again
see how it goes
Some will call me fatalist And some will call me freak
But hidden in my throwing fist The fortune that I seek-- Amon amarth

Similar Messages

Multiple mailboxes when using mail.app with google in IMAP.

Hello,
I have just started using mail.app with IMAP and my google mail account appears to be in two place. The mail.app has the following interface in the left pane.
MAILBOXES, REMINDERS, RSS and GMAIL all in grey. Below the MAILBOXES i have got the following folders, inbox, sent and trash and below the GMAIL, i have got a replication of the structure in my google account.
which set of folders should i be using?
when i deleet the mail in the MAILBOXES it does not seem to delete it in All Mail folder under GMAIL.
IS the synchronisation between the mails in the mail.app and the google server on a periodic basis. can i force the synchronisation?

Mail works fine with Exchange 2003. This is how our accounts are configured:
Incoming Mail Server:your exchange server.domain.com.au
eg. server2.bunnings.com.au
Username: domain\User alias\Full username
eg. bunnings\bobs\bob.smith
SMTP: smtp.bunnings.com.au
Web Access Server: webmail.bunnings.com.au
You can then setup the LDAP options under the composing tab to get the email list from your Exchange server.
And no i do not work for Bunnings!
Good Luck!

IPad Loudspeaker hiss when using an app with sound. Is this normal?

Is it normal when an app that uses sound is launched (even the keyboard causes it) a very faint hiss sound is emitted from the iPad speaker? It is not constant either, only occurs when it's about to make a sound and for 5-6 seconds afterwards.
It is not loud, only fairly faint and can only be heard when the room is silent or you place your ear near the speaker.
Is this normal?

Hi,
Yes it's only minor and I have tried resetting which has no effect.
For example, when I open up mail or safari and then the keyboard pop's up it has a faint hiss from the speaker which then disappears after 5 seconds until I press a key of which then triggers it to reappear. It sounds like the audio amplifier running the internal speaker has some hiss and to save battery life it turns the speaker off when it isn't needed (hence why it disappears after 4-5 seconds).
It is only noticeable in a very quiet room and I guess it doesn't help that I have fantastic hearing.
I guess it's no big problem and it doesn't happen when I use headphones but it's just something I'd like to check in case it's the sign of a fault.
Thank you for your response red555, much appreciated.

I use iphone 3GS, after upgared to ios5, my phone restart when i took picture with button and while playing music .. what happened?

I use iphone 3GS, after upgraded to ios5, my phone restart when i took picture with button and while playing music .. what happened?

Basic troubleshooting steps in the following order.
1. Reset. Press and hold both Power and Home Buttons together till Apple Logo appears.
2. Restore to a backup.
3. Backup, Restore in iTunes and setup as new.

Trouble with my ipod getting hot when useing instagram app and also problems with my ipod closeing and returning to home screen unexpectedly?

when i'm useing my ipod and i'm useing the instagram app. I feel my ipod starting to get really hot. i am also having problems useing app and them all a sudden closing on me and ipod will return to the home screen

It is not unusual for the to get worm when using some apps.
For the app problem see:
iOS: Troubleshooting applications purchased from the App Store

Walkman app with simplified chinese words

Hi all,
i am using walkman app 8.5.1.3.2 and have song title in simplified chinese characters. However, the search function always shows no match found when i use search the simplifired hinese character. Is this is a bug?

Hi,
Could you please send me your details in a PM, and I will forward this.
Make a relevant topic and include the following.
Name:
Phone nr:
E-mail:
Country:
Operator:
Product(s):
IMEI nr:
Build number:
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Random crashes when using USB drive with Creatie Suite

I have a 24" Intel IMAC and when using a SanDisk Cruzer Titanium 2GB and Creative Suite I eperience random crashes in CS. When I remove th drive it works fine, any known issues when using Rosetta apps and USB drives?
thanks

So a guy goes into his doctors office and tells his doctor "Ya gotta
help me doc...it hurts when I run my head into the door like
this...OW!". Then the doctor says:
"DON'T DO THAT ANY MORE!!!"
(I promise to keep my day job...oops what job...and not go into
comedy..)
Why don't you convert all the old 16 bit code into 32 bit code and
create one application where the various parts all know about each
other? I don't think that there's any way to coordinate an old 16 bit
LV and a new 32 bit LV application so that they don't step on each
other driverwise like they appear to be doing. I don't think that the
two LabVIEW's even know that the other exists!
Alternatively, get a second computer to run the 16 bit code on and
make the two apps communicate with
each other using TCP/IP or serial.
Doug De Clue
[email protected]
cincidude wrote in message news:<[email protected]>...
> I am using 2 versions of Labview at the same time, one is version 4
> which has a camera and a weigh-in-motion scale attached to it. The
> second is either Labview version 4, 16-bit or Labview 3.0.1, 16-bit,
> i'm not sure. The sixteen bit has a data acquisition system attached
> to it. Its an optim electronics system and the 16-bit Labview drivers
> for the optim were provided by Optim electronics and so I am stuck
> with using the same system. When I use both these systems in tandem,
> the system crashes frequently, but both systems run fine
> independently. It usually just freezes up or says "Illegal operation
> performed. Contact program vendor". Its a windows error with a red
> cross.

MacBook Pro freezes when using any app other than the web browser.

My MacBook freezes when using any app other than the web browser. I can open up Google Chrome and use it all day with no problem, but if I minimize it and try to browse through photos in my picture folder or do anything that involves the Finder, the computer just freezes up and I get the rainbow wheel. If I put in a CD to play it, the computer freezes with the rainbow wheel. Any suggestions? I would like to use the mac for more things than the internet.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

TS1702 unknown error when using the app store

unknown error when using the app store

Im sorry I will try to be more clear.. and I appreciate all of ur input. Wi-fi works fine.. everything opens and functions fine on the I pad. The problem is I will click on app store or the I tunes store...it opens fine and I am able to look at and download apps etc... but after being in the appstore or I tunes store for a couple of minutes I get kicked out to the I pads home screen. Its like pushing the home button but I didn't. It only seems to do this when im in the app store or I tunes store. I have been using the chrome browser and other downloaded apps such as ebay just fine with out this problem occurring. Not sure about safari as I dont use it and use chrome instead. Um I don't think the home button its self is faulty because it works fine and as stated before this only happens when I am in the appstore or I tunes . I've only had this I pad 1 64gb wi-fi for a few days .. I got it off of ebay it was stuck in restore mode getting error code 1611. I was able to successfully Restore it with I tunes and it running ios 5.1. Seams to work great besides the problem being mentioned.

When using the app store i get kicked back to the home screen?

I will be browsing through the app store on my iPad and all of a sudden the screen goes black for second and then I'm back at the iPad home screen? It happens pretty frequently and only seems to happen when using the app store. I don't understand why I keep gettig kicked back to home screen and any solution would be appreciated.

Im sorry I will try to be more clear.. and I appreciate all of ur input. Wi-fi works fine.. everything opens and functions fine on the I pad. The problem is I will click on app store or the I tunes store...it opens fine and I am able to look at and download apps etc... but after being in the appstore or I tunes store for a couple of minutes I get kicked out to the I pads home screen. Its like pushing the home button but I didn't. It only seems to do this when im in the app store or I tunes store. I have been using the chrome browser and other downloaded apps such as ebay just fine with out this problem occurring. Not sure about safari as I dont use it and use chrome instead. Um I don't think the home button its self is faulty because it works fine and as stated before this only happens when I am in the appstore or I tunes . I've only had this I pad 1 64gb wi-fi for a few days .. I got it off of ebay it was stuck in restore mode getting error code 1611. I was able to successfully Restore it with I tunes and it running ios 5.1. Seams to work great besides the problem being mentioned.

HT201335 when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue?

when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue? My son's Ipad(same as kind as mine) works ok with the apple tv but mine does not. Any suggestions?

Hello Nina Izurin,
While written for the iPhone, the troubleshooting below can help resolve issues with your iPad's camera, as well.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

Full page prints from iPhone but not from iPad using photo app with AirPrint ?

Full page prints from iPhone but not from iPad using photo app with AirPrint ? iPad only prints 4x6 on full size paper. It's an HP 8600.

I also have this problem printing photos from an iPad to an Epson WF-2540 printer. It prints only 4x6 and without border (so print starts at extreme top left corner of paper). Borderless printing is not selected on printer. Printing a square photo just crops to 4x6 size.

[svn] 1720: Bugs: LCDS-304 - Authentication not working in all cases when using security constraint with NIO endpoints .

Revision: 1720
Author: [email protected]
Date: 2008-05-14 14:50:06 -0700 (Wed, 14 May 2008)
Log Message:
Bugs: LCDS-304 - Authentication not working in all cases when using security constraint with NIO endpoints.
QA: Yes
Doc: No
Details:
Update to the TomcatLoginCommand to work correctly with NIO endpoints.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-304
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

Revision: 1720
Author: [email protected]
Date: 2008-05-14 14:50:06 -0700 (Wed, 14 May 2008)
Log Message:
Bugs: LCDS-304 - Authentication not working in all cases when using security constraint with NIO endpoints.
QA: Yes
Doc: No
Details:
Update to the TomcatLoginCommand to work correctly with NIO endpoints.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-304
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

Capturing error messages from Oracle EBS APIs when using Oracle Apps Adapter

We are using Oracle applications adapter to call Oracle EBS (both R11.5 and R12) APIs. I want to understand the best practice around error handling when using Oracle Apps Adapter to call Oracle EBS.
Here are some observations:
1. Most of the APIs return X_RETURN_STATUS and X_MSG_DATA containing the status and messages if any.
2. If the MSG COUNT is 1 then X_MSG_DATA contains the message, if MSG COUNT is > 1. X_MSG_DATA is empty.
We know that when calling the API directly from PL/SQL, we need to loop through FND_MSG_PUB to fetch all messages when there are more than 1. How do we achieve the same using Apps Adapter as Apps Adapter generates the PL/SQL block to call the API dynamically at runtime.
In some APIs, which have table/rec types as input or output parameters, Apps Adapter generates a wrapper package to do conversion from SQL--> PL/SQL and viceversa. In this case the adapter calls the custom package generated which internally calls the API. For these APIs we were able to put the logic to loop through FND_MSG_PUB and return a concatenated string as value of X_MSG_DATA.
But what should we do for the APIs which do NOT have a rec/table type as input or output, in which case the Apps Adapter directly calls the API and there is no intermediate custom package?
How are others handling this?

Please see the section "Handling Functional Errors" in the below link
Oracle Fusion Middleware Adapter for Oracle Applications User's Guide

Strange behaviour when using connection pooling with proxy authentication

All
I have developed an ASP.NET 1.1 Web application that uses ODP.NET 9.2.0.4 accessing Oracle Database 8i (which is to be upgraded to 10g in the coming months). I have enabled connection pooling and implemented proxy authentication.
I am observing a strange behaviour in the live environment. If two users (User 1 and User 2) are executing SQL statements at the same time (concurrent threads in IIS), the following is occurring:
* User 1 opens a new connection, executes a SELECT statement, and closes this connection. The audit log, which uses the USER function, shows User 1 executed this statement.
* User 2 opens the same connection (before it is released to the connection pool?), excutes an INSERT statement, and closes this connection. The audit log shows User 1, not User 2, executed this statement.
Is this a known issue when using connection pooling with proxy authentication? I appreciate your help.
Regards,
Chris

Hi Chris,
I tried to reproduce your complaint, but was unable to. I didnt use auditting however, just a series of "select user from dual" with proxy authentication. You might want to see if you can put together a small complete testcase for this and open a sr with support.
Cheers
Greg

Xperia l restarts when using Walkman app with internal speaker

Similar Messages

Maybe you are looking for