Xslt mapping cidx message is Load Tender Motor

Hi
I am working on XSLT Mapping from the below link SAP Technical
Import corresponding XSD structure under External Definitions in IR. Here the corresponding CIDX message is Load Tender Motor.
In the above line what is CIDX, I have little bit knowledge about that, I read that in Adapters topic CIDX, PIDX this are some industry standard adapters. but how to import that Load Tender Motor in to my Scenario.
So can any body please go through that link and provide some usefull information.
Thanks
G V Anil

Hi
CIDX is adapter.use this thread for detail
About CIDX
CIDX scenario
XI CIDX

Similar Messages

How to call xslt mapping in message transformbean

Hi Folks,
I have written a simple xslt mapping to convert 2 fields into different fields. That is working fine from me.
I want to use this xslt mapping in message transformbean adapter module. I dont want to use this in operation mapping. Can you please tell me how would I do this.
How would I configure this.
Thanks,
Rohini

Hi,
According to me, we cannot call the xslt program/map from adapter module.
Why we can't call is in adapter module we can use java EJBs, but what ever you suppose to call is not an EJB application.
FYI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a
Regards,
Venkata Ramesh

XSLT mapping - 2 messages to 1

Is it possible to map 2 xml files into 1 with only one XSLT mapping?
I need to use XSLT because the target message is a xml with only one tag of type string, and inside this string I need to pass the content of both source messages. But the only way of performing XML to string conversion is through XSLT.
I've managed to successfully perform 1 XML to string mapping, but I don't know how to proceed with 2 source xml's.
Thanks in advance.

Hi,
I think, XSLT mapping will read one xml document at a time.
So if get two xmls files under one tag(root element) then you can achieve this with message/xslt/java mapping.
Then it will be of type N:1 mapping
How are you planning to do in XI.. Are you using BPM here ? so that in the fork step you can two receivers (2 files) and execute transformation steps and send with 1 message.
http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm
Hope this helps,
Regards,
Moorthy

XSLT-Mapping oder Message Mapping (grafisches Mapping)?

Hallo,
which mapping type is the best? xslt oder message mapping?
Jens

Hi,
In terms of perfromance , XSLT is supposed to be very bad and is to be avoided whenever possibl.e
Graphical Mapping is the best when it comes to performance of the mapping.
But , there are a few features, which are not possible using graphical in which case you might have to go for JAVA/ ABAP / XSLT mapping.
Regards,
Bhavesh

Help Required for XSLT mapping

Hi Folks,
I am working on a scenario, where we had 17 different one to one mapping with same source strcture but different target structures. Source is a Idoc common for everyone.
Sample Target Structure :
Message Type(XYZ)
                 RECORDS(0,u)
                                         A(0,1)
                                         B(0,1)
                                         C(0,1)
                                         D(0,1)
As per our requirement we need the output in which we need to have "GLOBE " at the top and the value of A, B, C and D on single row for each ouurance of RECORD. For 2nd occurance we need to change the line and 2 nd set of ABCD on 2nd row and so on. e.g.
GLOBE
0002044452KNA1 0000027079 0001E
0002044452KNA1 0000027080 0001E
0002044452KNA1 0000027080 0001E
To acheive the above output we are using a XSLT map after Message Mapping
<?xml version="1.0" encoding="UTF-8" ?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="text" indent="no" encoding="UTF-8" omit-xml-declaration="yes"/>
<xsl:preserve-space elements="*"/>
<xsl:template match="/">GLOBE<xsl:text>
</xsl:text>
<xsl:for-each select="//RECORDS">
<xsl:for-each select="*">
     <xsl:value-of select="current()"/>
</xsl:for-each><xsl:text>
</xsl:text></xsl:for-each>
</xsl:template>
</xsl:stylesheet>
NOW WE HAVE changed the 17 one to one maps to one multi mapping (1:17) as our source is same.
Now as the output of this multi mapping is getting into XSL code, it is not able to parse it.
How can we do the changes in this particular code So that we can Achieve:                     17 different file out of single multi mapping and XSL map like it was comming previously from 17 different maps.
Thanks
Pradeep

Hi Pradeep,
Depending on how you setup your multi mapping, when you execute you will end up with something like this as the xml output:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
    <XYZ></XYZ>
    <XYZ></XYZ>
</ns0:Message1>
</ns0:Messages>
Or this:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
    <XYZ></XYZ>
</ns0:Message1>
<ns0:Message2>
    <XYZ></XYZ>
</ns0:Message2>
</ns0:Messages>
The single xml message with the u201CMessagesu201D wrapper is not split into separate messages until it hits one of the adapters in the adapter engine. Perhaps you can try to adjust the xslt to expect this as input, but the output would still need to be <ns0:Messages>. That might be what is causing the failure with your current xslt. Can the flat file conversion in the file adapter?
Thanks,
-Russ

XSLT Mapping of Adapter-Specific Message Attributes

Hi,
We have the requirement to build a soap request with a custom soap envelop/header which contains a sessionId.
Therefore we developed a xlst mapping which is called directly after a graphical mapping.
In the graphical mapping the session id is written to the dynamic configuration.
The goal is to read this session id in the xslt mapping from the dynamic configuration using XSLT Mapping of Adapter-Specific Message Attributes. We used [this|http://help.sap.com/saphelp_nwpi711/helpdata/en/43/03fe1bdc7821ade10000000a1553f6/content.htm] documentation as an example.
But we are getting the following error: TransformerConfigurationException triggered while loading XSLT mapping. The error is raised at this node: <xsl:variable name="dynamic-conf" select="map:get($inputparam, 'DynamicConfiguration')" />
This is the coding of the xslt transformation:
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0"
      xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
      xmlns:ns1="urn:enterprise.soap.sforce.com"
      xmlns:map="java:java.util.Map"
      xmlns:dyn="java:com.sap.aii.mapping.api.DynamicConfiguration"
      xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
<xsl:output indent="no" />
<xsl:param name="inputparam"/>
<xsl:template match="/">
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:urn="urn:enterprise.soap.sforce.com">
<soapenv:Header>
<urn:SessionHeader>
<xsl:variable name="dynamic-conf" select="map:get($inputparam, 'DynamicConfiguration')" />
<xsl:variable name="dynamic-key" select="key:create('http://sap.com/xi/XI/System/SOAP', 'sessionId')" />
<xsl:variable name="dynamic-value" select="dyn:get($dynamic-conf, $dynamic-key)" />
<urn:sessionId><xsl:value-of select="$dynamic-value"></xsl:value-of></urn:sessionId>
</urn:SessionHeader>
</soapenv:Header>
<soapenv:Body>
<xsl:copy-of select="*"/>
</soapenv:Body>
</soapenv:Envelope>
</xsl:template>
</xsl:stylesheet>
Any help will be highly appreciated.
Regards, Henk

Hi, yes we did try that and lot's of other combination.
The results of those trials are that it seems to go wrong with <xsl:variable name="dynamic-conf" select="map:get($inputparam, 'DynamicConfiguration')" />
When we enclose it with <xsl:if test="function-available('map:get')"> the transformation is not dumping, but the function is not available.
Regards, Henk

XSLT Mapping, Transformer configuration exception occurred when loading

Hi,
My source message is an IDOC HRMD, I need my target message to include exactly
<EPERSON xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="ContextPersonMessage">
I have therefore suggested to use XSLT mapping.
Here is the test_mapping.xsl that I Imported as Zip in Imported Archives.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://polyright.com/xi/HR">
     <xsl:template match="/">
          <EPERSON xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="ContextPersonMessage">
                      <xsl:for-each select="HRMD_A07/IDOC/E1PLOGI">
            <CONTEXTPERSON personid="" id="">
                  <PERSON action="add">
                           <TITLE></TITLE>
                           <FIRSTNAME><xsl:value-of select="E1PITYP/E1P0002/VORNA"/></FIRSTNAME>
                           <SECONDNAME></SECONDNAME>
                           <NAME><xsl:value-of select="E1PITYP/E1P0002/NACHN"/></NAME>
                           <ADDRESS1></ADDRESS1>
                           <ADDRESS2></ADDRESS2>
                           <POSTALCODE></POSTALCODE>
                           <CITY></CITY>
                           <COUNTRY></COUNTRY>
                           <COUNTRYID></COUNTRYID>
                           <PROFESSION></PROFESSION>
                           <LANGUAGE></LANGUAGE>
                           <LANGUAGEID></LANGUAGEID>
                           <PERSONTYPEID></PERSONTYPEID>
                           <CREATIONDATE></CREATIONDATE>
                           <BIRTHDATE></BIRTHDATE>
                           <CATEGORY></CATEGORY>
                         </PERSON>
                  </xsl:for-each>
          </EPERSON>
     </xsl:template>
</xsl:stylesheet>
When I test the Interface mapping, I get the following error:
Transformer configuration exception occurred when loading XSLT test_mapping.xsl (http://polyright.com/xi/HR, 783938d1-4463-11dd-b136-e03ac0a80c15, -1)
Searching through the forum, it is probably an namespace issue, but I have no idea of what needs to be changed. Any suggestions ?

Try running end-to-end scenario and check if you could get detailed error message.
Also check if the problem arises from the "ns0" usage.
Regards,
Prateek

Error when loading XSLT mapping of the application

Hi,
I am using XSLT mapping in XI.
It is working ok when I test it in Interface Mapping but it gives below error when I test end to end scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TRANSFORMER_CONF_EX</SAP:Code>
<SAP:P1>com/cba/***.xsl</SAP:P1>
<SAP:P2>urn:**:**</SAP:P2>
<SAP:P3>450326d0-1559-11dd-99a1-d89c0a0a380b</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when loading XSLT mapping of the application</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Yes, I have activated it
Regards,
Anirudh.

hi
please assure that if you save your xslt stylesheet locally, that it is saved in UTF-8 format, before you import it.
Pls do export the imported archive as a zip file to your local disk and try opening the same. If its not then the zip file which you have uploaded might have got corrupted/is not fully uploaded.
Try activating the imported archive and do a check before you do that. This you can do with a minor change in the description or so.
reward points if found helpfull
regards
chandra.k

A null object loaded from local variable 'o' in XSLT mapping

Hi experts,
We are facing an issue in XSLT mapping for one of the inbound scenario.
While executing the source message at mapping level, it is failing with the error text - "javax.xml.transform.TransformerException: com.sap.engine.lib.xsl.xpath.XPathException: Error parsing query -> java.lang.NullPointerException: while trying to invoke the method java.lang.Object.toString() of a null object loaded from local variable 'o'
Kindly help us on this issue!
FYI - We are facing this issue in PO 7.4 version.
Best Regards,
Uday.

HI Hareesh,
Thanks for your inputs...
We are migrating the interface from PI7.1 to PI 7.4 at this one we are getting the error as mentioned the earlier. we are uanle to run it in the mapping level as well.
Why are we getting the error?As this is working in PI7.1 version
Please help us on this.

XSLT mapping, how can I include a Runtime Constants in target message

Hi, I would like in my XSLT mapping, to have an attribute include the MessageID.
From my understanding of the online help [http://help.sap.com/saphelp_nw04/helpdata/en/73/f61eea1741453eb8f794e150067930/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/73/f61eea1741453eb8f794e150067930/content.htm], I have the following code in my XSL:
<xsl:param name="MessageId" />
<xsl:attribute name="filename">Output_<xsl:value-of select="$MessageId"/>.xml</xsl:attribute>
But for now the result is to have a filename attribute that only contains: "Output_.xml" as if the $MessageId is empty.
Anyone experienced successfully using one of those runtime constants with XSLT mapping ?
Cheers,
greg

Hi, found the answer of why it was not running: I'm in a transform step of a BPM:
For more info check this thread:
[/message/435521#435521 [original link is broken]|/message/435521#435521 [original link is broken]]

How do I resolve error message "mapi was unable to load aplzod.dll"? Outlook2010 on Win7

Attempts to open Outlook calendar files (apparently located) on iCloud result in the error message "MAPI was unable to load the information service C:\PROGRA~2\COMMON~1\Apple\Internet Services\APLZOD.dll". Be sure the service is correctly installed and configured."
I am running Outlook 2010 on Windows 7. I have uninstalled and reinstalled iTunes with no apparent effect. Is this a problem with iTunes or Outlook, how do I resolve it?

That's part of my problem - I was getting the error message when I tried to click on iCloud in the Calendar portion of Outlook 2010. I don't know where it was generated (iCloud, iTunes, or as an add-in to Outlook).
After my original post I tried restoring my computer to a date when I knew this worked, the restoration worked, and I can access my calendar. So that problem resolved itself.
I do have another question, but I'll post it separately. Thanks for your response.

Error while trying to load the xslt mapping

Hi,
while testing the xslt mapping, the following error is encountered:
"TransformerConfigurationException occurred when loading MAP.xsl; details: Could not compile stylesheet"
Please help me in the resolving this.
Regards,
Meenakshi

Hi Meenakshi,
Select XMLTOOLKIT option in operation mapping,and execute your XSLT Mapping.....
Check this thread for more help...
XSLT mapping issue
Regds,
Pinangshuk.

When i start ifind i get message about load error. i click reload option and icloud main screen opens ifind shows a map that is misaligned. phone shows several blocks away. can play sound thru ifind and acess info on phone. all os upto date. any idea

start ifind from web on my dell pc with win 7. get error on load to retry later or reload. click reload and icloud main screen comes up. I hit ifind and phone shows up on a misaligned map and is shown several blocks from actual location. tried daughters phone and map shows up inaccurate for hers also. I have 4s she has 5c all ios on phones are updated . I can get phone to sound and access data such as contacts, calendars. the problem with bad map and message that there is a problem on starting. previously the map had no problems and location was accurate to within a short distance.

Thank you for the sympathy and the information about the Adobe.com forum Michael.
I posted here because, to be honest, for a company that's acknowledged their installers and updaters and support needs some work, they seem very determined to obfuscate the means by which users can provide direct feedback to the company. Much like you, I've also noticed a trend in CS5 installations that mirrors the issues that were present in CS4. it's a sad state of affairs.
As for my installation, you are also quite right to say that a clean install would have been a lot faster than what I went through with TS and it was actually my first idea. Before calling TS I'd actually read through the forums and noticed that a large number of users who were faced with my situation had no other choice but to reformat. I was just giving Adobe the benefit of the doubt and wasted 2 and a half weeks through that course of action...
What makes this situation even more frustrating is that the installer failed on a fresh system. It was a custom-built design machine, assembled and configured by myself. The only software that had been installed on it prior to Design Premium was Firefox, an FTP client and the start of my problems, trial versions of various CS4 programs. I used trials just long enough to retire the previous design computer so that I wouldn't contravene the EULA's stipulation of not running more than one instance of software at the same time on different machines. Turns out being honest once again penalised a legal customer.
If there is just thing users should learn from my far from unique tale of failed tech support it's that if you ever run into a problem with the installation, don't bother calling TS, just reformat and start from scratch. It might seem like it'll take longer to get going again, but in actuality, it's the opposite. Reformatting means you'll be up and running in about 1 or 2 days rather than 2 weeks.
Marc

XSLT Mapping with Java class not working in Integration Repository

Hi,
I have an XSLT mapping program with Java enhancement and I was able to successfully tested it in Stylus Studio. However, when I imported the Java class and the xslt program in Enterprise Service Builder and tested it, my program does not compile.
Here is the error message: "Transformer Configuration Exception occurred when loading XSLT mapping_temp.xsl; details: Could not compile stylesheet".
My java program is in a zip file containing SOAPHeaderHandler.java and SOAPHeaderhandler.class. My Java has a package com.nga.xslt.
Here is the declaration of my Java class in the XSLT: xmlns:javamap="java:com.nga.xslt.SOAPHeaderHandler"
It seems that it could not read the java class. Can you please advice what is wrong?

Hi ,
select XMLTOOLKIT option in Operation mapping and execute it.
I am not sure we can call java program in XSLT Program,but alternative is copy the code and use it in XSLT mapping it self,that means your XSLT program will become with JAVA extensions.
then in Operation mapping level select SAPXMLTOOL kit option and execute it. i hope it will work. if it is not working then you have deploy some JAXP files on server,because the way execution of XSLT Mpaping program got changed,like when eve you executing XSLT with extnasions( if you are not using XMLTOOL kit option) then you have to use latest version of JAXP.JDK files.
Regards,
Raj

ERROR WHILE USING XSLT MAPPING IN INTERFACE MAPPING

Hi,
We are using an xslt mapping in our scenario but while i load the XSLT mapping in the interface mapping i get a message :
Transformer configuration exception occurred when loading XSLT
sorce interface :outbound and asyncronous.
mapping : XSLT mapping (imported as a zip file)
target interface: abstract,asyncronous.
The xslt runs well in standalone and its well formed and there is no name space issue.
please help if any one has faced such a situation while using XSLT mapping.
regards,
Anirban.

Hi Anirban
When you say it runs well <i>standalone</i> what exactly do you mean? Which XSLT processor are you using to run it? There are subtle difference between XSTL processors that can sometimes result in incompatibilities. For instance, I have seen XSLTs run correctly in XMLSpy but incorrectly (or at least slightly differently) in XI.
Regards,
Thorsten

Xslt mapping cidx message is Load Tender Motor

Similar Messages

Maybe you are looking for