XSLT Mapping - Configuration error

Hi there,
I have loaded an XSLT mapping that references 2 other mapping templates (in separate files). When I test the main mapping (in the Interface Mapping test tool) I get the following error:
Transformer configuration exception occurred when loading XSLT POSbankingPacketToWPUFIB.xsl (http://ournamespace, 36cb0f00-1a9b-11d8-96af-e1600a114c15, -1)
The trace in the tool showed the following:
Creating XSLT mapping POSbankingPacketToWPUFIB
URIResolver called with href = EDI_DC40.xsl and base = POSbankingPacketToWPUFIB.xsl
Source resolved. System id = EDI_DC40.xsl
URIResolver called with href = WPUFIB.WPUFIB01.xsl and base = POSbankingPacketToWPUFIB.xsl
Source resolved. System id = WPUFIB.WPUFIB01.xsl
Any ideas on how to resolve this problem would be appreciated. Info below may also be helpful:
- I have tested the XSL mapping in xmlSpy and it produces the required result but in the IR the error above occur. - I am using <xsl:stylesheet version="2.0" .... > in my definition
- I am calling templates from the POSbankingPacketToWPUFIB.xsl that exist in both EDI_DC40.xsl and WPUFIB.WPUFIB01.xsl
- I am using variables, template parameters and <xsl:text disable-output-escaping="yes"> in the referenced xsl stylesheets.
Regards
Christiaan

Hi there,
Thank you for your answer. All of those things were okay.
The problem was related to XPath 2.0 syntax which does not seem to be supported by XI. The statement in question was:
<xsl:for-each select="POSbankingPacket/DetailGroup[GroupType ne 'HD']">
I have now switched to XSLT 1.1 and will hopefully find a adequate replacement statement.
Thank you,
Christiaan

Similar Messages

Jboss/tomcat mapping configuration error

I can't even get the combination to serve a .jsp file or .html file. Regardless of the URL that I attempt, I only get a No Context configured to process this request error from tomcat and INFO [Engine] StandardHost[localhost]: MAPPING configuration error for request URI from JBoss. I've tried to access all of the various webapps under the catalina directory and can't get to any of them. I know that catalina is started because the log file shows
<Service name="JBoss-Tomcat">
<Engine name="MainEngine" defaultHost="localhost">
<Logger className="org.jboss.web.catalina.Log4jLogger" verbosityLevel="trace" category="org.jboss.web.localhost.Engine" />
<Host name="localhost">
<Valve className="org.apache.catalina.valves.AccessLogValve" prefix="localhost_access" suffix=".log" pattern="common" directory="../server/default/log" />
<DefaultContext cookies="true" crossContext="true" override="true" />
</Host>
</Engine>

<Connector className="org.apache.catalina.connector.http.HttpConnector" port="8080" minProcessors="3" maxProcessors="10" enableLookups="true" acceptCount="10" debug="0" connectionTimeout="60000" />
</Service>
</Server> in jboss.web:service=EmbeddedCatalinaSX
2002-06-12 23:29:44,760 INFO [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Creating
2002-06-12 23:29:44,760 INFO [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Created
2002-06-12 23:29:44,760 DEBUG [org.jboss.deployment.MainDeployer] Done with create step of deploying tomcat4-service.xml
2002-06-12 23:29:44,760 DEBUG [org.jboss.deployment.MainDeployer] start step for deployment file:/D:/JBoss3.0/jboss-3.0.0_tomcat-4.0.3/server/default/deploy/tomcat4-service.xml
2002-06-12 23:29:44,760 DEBUG [org.jboss.deployment.SARDeployer] Deploying SAR, start step: url file:/D:/JBoss3.0/jboss-3.0.0_tomcat-4.0.3/server/default/deploy/tomcat4-service.xml
2002-06-12 23:29:44,760 INFO [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Starting
2002-06-12 23:29:44,760 INFO [org.jboss.deployment.MainDeployer] Adding deployer: org.jboss.web.catalina.EmbeddedCatalinaServiceSX@7dadcd
2002-06-12 23:29:44,760 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Setting catalina debug level to: 0
2002-06-12 23:29:44,760 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Setting catalina.home to: ../catalina
2002-06-12 23:29:44,760 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Setting catalina.base to: ../catalina
with no errors. I'm confused because I was able to consistently work with previous versions of JBoss with no problem. The configuration seems to have changed radically, is this some recent change that I just can't find a reference to? Thanks for any help.

Hi
For Tomcat 3.x you need to use one of the following options:
(Note: this is with JBoss/Tomcat OR JBoss/Jetty)
Place you .war files in the following location:
C:\jboss-3.0.3\server\default\deploy and the app is automatically available.
If my app's name is DavidOnline.war, when deployed, I can access it at
http://localhost:8080/DavidOnline..
OR
Copy your entire development directory to the deploy direction above, RENAME your
directory from say C:\JspApps to C:\JspApps.war and you can work from that location and see your changes immeadiatly.
There is a file called jboss-service.xml that has some config options, also for the Tomcat bundle there is a file named tomcat-service.xml that has the standard server.xml section.. I suggest you check out the JBoss website, free docs and forums.. http://www.jboss.org.
Thanks, Hope this helps.

MAPPING MAPPING configuration error

I am getting MAPPING configuration error while running this code using Tomcat 4.1 on my website whereas it is running at my local webserver
Please HELP
ERROR LOG
StandardHost[site.winwinhosting.net]:MAPPING configuration error for request URI /
NewsFile read: java.lang.NullPointerException:name can:+t be null NewsFile read: java.lang.NullPointerException: name can:+t be null NewsFile read:
java.lang.NullPointerException: name can:+t be null
Bunty
<%@ page import = "java.io.*, java.util.*,java.net.URL,java.awt.*" %>
<HTML>
<head></head>
<body>
<%
// Read in the text file newsfile.txt
ServletContext context = getServletContext();
String file = (context.getRealPath("news.txt"));
//String file = "news.txt";
StringBuffer stringbuffer = new StringBuffer("");
 FontMetrics fm;
 Font f1;
 String str;
 String s;
 String tmp;
 String param;
 int i;
 int disp;
 int tot;
 int pos;
 int pos1;
 int ImageDepth;
 int TextDepth;
 int fmW;
 int dd;
 int width;
 int height;
 int j;
 char ch;
str = new String(" * Online : News * Ticker * ");
tmp = new String("");
param = new String("");
String s3,s2,s1, news = new String();
try {
DataInputStream in = new DataInputStream(new BufferedInputStream(new FileInputStream(file)));
//DataInputStream in = new DataInputStream((new URL( file)).openStream());
//stringbuffer.append(in.readLine());
//stringbuffer.append(" * ");
//s1 = stringbuffer.toString();
//out.println(s1);
while((in.readLine())!= null)
s2=in.readLine()+ "\r";
stringbuffer.append(s2);
stringbuffer.append(" * ");
//news += s2 + "\n";
//out.println(s2);
 in.close();
catch(Exception e) {
 System.out.println("NewsFile read: " + e);
%>
<%
news=stringbuffer.toString();
//out.println(news);
%>
<marquee><%=news%></marquee>
</body>
</html>

I think it is not able to locate your source file(New.txt). Try putting an output statement and see what is the patth it is printing and check whether it is the correct path where is your news.txt is located.
Bye

XSLT mapping throws error in XI, but not in XMLSPY

Hi everybody,
I got a really complex XSLT mapping. It works fine in XMLSPY.
But when I execute the mapping in XI, I get the following error:
Error during XSLT Transformation: Could not load stylesheet.com.sap.engine.lib.xml.util.NestedException: Operator or ')' expected.
I asume there is a special character that XI cannot execute.
has anybody an idea of finding this character?
Thanks, regards Mario

Hi Mario
Check your input data, and also try to see test in Interface mapping test tab,
you will get an idea about the input is correct or not
see the below links..
XSLT Mapping[/u
/people/prasadbabu.nemalikanti3/blog/2006/03/30/xpath-functions-in-xslt-mapping
/people/sreekanth.babu2/blog/2005/01/05/design-time-value-mappings-in-xslt
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
XSLT Mapping with java enhancement
/people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
Cheers..
Vasu
** Reward Points if found useful **

XSLT mapping error in PI 7.1

Hi,
The below xslt compiles and runs fine with SAPXML toolkit but the same fails with error
u201CCannot find external method 'java.util.Map.get' (must be public).".
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:map="java:java.util.Map"
xmlns:dyn="java:com.sap.aii.mapping.api.DynamicConfiguration"
xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
<xsl:output indent="no" />
<xsl:param name="inputparam"/>
<xsl:template match="/">
 
 <xsl:variable name="dynamic-conf"
 select="map:get($inputparam, 'DynamicConfiguration')" />
 <xsl:variable name="dynamic-key"
 select="key:create('http://sap.com/xi/XI/System/File', 'Directory')" />
 <xsl:variable name="dynamic-value"
 select="dyn:get($dynamic-conf, $dynamic-key)" />
 <xsl:variable name="new-value"
 select="concat($dynamic-value, 'subfolder\')" />
 <xsl:variable name="dummy"
 select="dyn:put($dynamic-conf, $dynamic-key, $new-value)" />
 
 <xsl:copy-of select="." />
</xsl:template>
</xsl:stylesheet>
Regards,
Vishal

Hi,
I am already using jdk 5 for the same.
Can you please tell me what is the setting(s) that need to be done for XSLT to be used with JDK5.
I have a knowledge on how to develop a XSLT mapping, but fail to understand what is the relation between XSLT and JDK5.
It will be very helpful to me if you post your reply to my question here: Basic Settings in Operation Mapping
Appreciate your help and time.
Thanks.

Raise error in an external-function of XSLT-mapping (ABAP)

Hi,
we implemented a xslt-mapping (ABAP) in PI with external-functions.
It's a great feature and works fine.
Now, we have to implement an error handling:
The external-functions are reading data from an abap table. We have to stop the mapping (if a value in the table is missing).
We wanna show an error inside the PI-Monitoring (red flag) with a valid error text.
How can I raise an error inside an external-function?
regards
Wolfgang Hummel

Hi Michal,
thanks a lot for your answer.
Can I set dynamic configuration inside an external funktion of an ABAP-XSLT?
I added the CX_MAPPING_FAULT-Exception to my external-function method and raised an exception inside my external-funktion ... and I got an "UNCAUGHT_EXCEPTION" inside my mapping - bad
regards
Wolfgang

XSLT Mapping, Transformer configuration exception occurred when loading

Hi,
My source message is an IDOC HRMD, I need my target message to include exactly
<EPERSON xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="ContextPersonMessage">
I have therefore suggested to use XSLT mapping.
Here is the test_mapping.xsl that I Imported as Zip in Imported Archives.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://polyright.com/xi/HR">
 <xsl:template match="/">
 <EPERSON xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="ContextPersonMessage">
 <xsl:for-each select="HRMD_A07/IDOC/E1PLOGI">
 <CONTEXTPERSON personid="" id="">
 <PERSON action="add">
 <TITLE></TITLE>
 <FIRSTNAME><xsl:value-of select="E1PITYP/E1P0002/VORNA"/></FIRSTNAME>
 <SECONDNAME></SECONDNAME>
 <NAME><xsl:value-of select="E1PITYP/E1P0002/NACHN"/></NAME>
 <ADDRESS1></ADDRESS1>
 <ADDRESS2></ADDRESS2>
 <POSTALCODE></POSTALCODE>
 <CITY></CITY>
 <COUNTRY></COUNTRY>
 <COUNTRYID></COUNTRYID>
 <PROFESSION></PROFESSION>
 <LANGUAGE></LANGUAGE>
 <LANGUAGEID></LANGUAGEID>
 <PERSONTYPEID></PERSONTYPEID>
 <CREATIONDATE></CREATIONDATE>
 <BIRTHDATE></BIRTHDATE>
 <CATEGORY></CATEGORY>
 </PERSON>
 </xsl:for-each>
 </EPERSON>
 </xsl:template>
</xsl:stylesheet>
When I test the Interface mapping, I get the following error:
Transformer configuration exception occurred when loading XSLT test_mapping.xsl (http://polyright.com/xi/HR, 783938d1-4463-11dd-b136-e03ac0a80c15, -1)
Searching through the forum, it is probably an namespace issue, but I have no idea of what needs to be changed. Any suggestions ?

Try running end-to-end scenario and check if you could get detailed error message.
Also check if the problem arises from the "ns0" usage.
Regards,
Prateek

XSLT mapping errors

Hi,
I am tring to develope a senario with XSLT mapping. As part of this i have
1. Created Soruce and Target data types and message types
2. Created Inbound and outbound message interfaces
3. Imported both source and target messages types (XSD) files to mapforce tool and did all mapping b/w source and target.
4. Tested the mappings with input file in mapforce tool and mappings are working fine.
5. Copied the content from the XSLT tab and saved it as .xsl file and zipped the .xls flle.
6. Imported Zip file under import archive section.
7. Created a interface mapping with the XLS file
After this i tried to test the mappings in the interface mapping using the 'Test' Tab. Interface execution failed with below error message.
"Transformer configuration exception occurred when loading XSLT mm_file.xsl (http://testxslt.com/xsltmap, e4ce06a0-231e-11db-b54f-c55b0aeb1850, -1
Could not load stylesheet.com.sap.engine.lib.xml.util.NestedException: Attribute 'separator' not allowed for element 'xsl:attribute' "
Could you please suggest me where i did wrong and give me light on this.
Thanks in advance..
Regards
Sree

Hi Reddy,
It says Attribute 'separator' not allowed for element 'xsl:attribute'. So please check this. Probably you would have copied the xsds and done mapping in map force. I feel this attribute has only few values and in that values you dont have separator.
Try to open the xsd in altova and see the possible values if any are there.
Regards,
---Satish

XSLT Mapping with Dynamic Configuration for Mail Adapter

Hi Guys,
I am wondering if somebody can help me please.
I have a requirement in which I need to pick up the file from FTP and email it to the user as an attachment with the same file name and content.
I know it is possible via 3 method either by deploying adapter module or via XSLT or JAVA Mapping.
I preferred XSLT Mapping because it is easier to use and we don't need to compile the code like JAVA Mapping.
I have done the XSLT Mapping but the only problem I am facing is that how to copy the file name which we get it from Dynamic Configuration to the Mail ContentDisposition.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:map="java:java.util.Map"
xmlns:dyn="java:com.sap.aii.mapping.api.DynamicConfiguration"
xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
<xsl:output indent="no" />
<xsl:param name="inputparam"/>
<xsl:template match="/">

 <xsl:variable name="dynamic-conf"
 select="map:get($inputparam, 'DynamicConfiguration')" />
 <xsl:variable name="dynamic-key"
 select="key:create('http://sap.com/xi/XI/System/File', 'FileName')" />
 <xsl:variable name="dynamic-value"
 select="dyn:get($dynamic-conf, $dynamic-key)" />
 <xsl:variable name="dummy"
 select="dyn:put($dynamic-conf, $dynamic-key, $new-value)" />
 
I tried many option but unfortunately none of them worked.
<Content_Disposition>attachment;filename="$inputparam"</Content_Disposition>
<Content_Disposition>attachment;filename="$dynamic-conf"</Content_Disposition>
<Content_Disposition>attachment;filename="$dynamic-key"</Content_Disposition>
<Content_Disposition>attachment;filename="$dynamic-value"</Content_Disposition>
<Content_Disposition>attachment;filename="$dummy"</Content_Disposition>
 <Content_Disposition>
 attachment;filename=
 <xsl:value-of select="dynamic-key"/>
 </Content_Disposition>
I really appreciate if someone can please provide some guidance.
Thanks,

Hi,
Yes u r correct it will show error in operation mapping.. bcoz u cannot check the DynamicConfiguration in Operation mapping...
It will throw Exception..
The parameter to UDF depends on ur requirement.... Let us know ur requirements exactly...
If u r doing for file to file means no UDF required,, just check ASMA on both sides....
Babu

Idoc with XSLT Mapping ALE service error

Hi all,
I have the same problem with "converting to an ALE logical system".
In this case I have a Business System without logical system name in the SLD. This information for the IDoc control record, like SNDPOR, I will map with a xslt mapping.
In weblogs from Michael are the properties for the directory described.
/people/michal.krawczyk2/blog/2005/09/01/xi-idoc-adapter--edidc40--demystified
I selected in the comminication channel the last two check boxes, as described in SAP help.
"Take Sender from Payload
If you want to take the sender of the message from the payload and not from the configuration information in the Integration Directory, set this indicator.
If you do not set the indicator, the information is taken from the configuration in the Integration Directory.
Take Receiver from Payload
If you want to take the receiver of the message from the payload and not from the configuration information in the Integration Directory, set this indicator.
If you do not set the indicator, the information is taken from the configuration in the Integration Directory.
If you set both of the above indicators, you do not require a heading mapping and do not need to set the alternative identifiers.
However, you must ensure that the SNDPRN, SNDPRT, RCVPRN, and RCVPRT fields are set in the IDoc control record.
Setting the senders and receivers of a message from the payload simplifies configuration and speeds up processing.
If the sender and receiver are not set correctly in the payload, the resulting error is only visible in the receiving system. "
In my XSLT-Mapping I set the appropriate Idoc fields:
<?xml version="1.0" encoding="iso-8859-1"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml"/>
<xsl:preserve-space elements="*"/>
<xsl:template match="DATEN">
<_-XXX_-018_XXXXX_XIDATEN>
<IDOC>
<xsl:attribute name="BEGIN">1</xsl:attribute>
<EDI_DC40>
<xsl:attribute name="SEGMENT">1</xsl:attribute>
<TABNAM>EDI_DC40</TABNAM>
<DOCREL></DOCREL>
<DIRECT>2</DIRECT>
<IDOCTYP>_-XXX_-018_XXXXX_XIDATEN</IDOCTYP>
<MESTYP>_-XXX_-018_XXXXX_XIDATEN</MESTYP>
<SNDPOR></SNDPOR>
<SNDPRN>XXXXX01IN</SNDPRN>
<SNDPRT>LS</SNDPRT>
<RCVPOR>xxx</RCVPOR>
<RCVPRN>xxx</RCVPRN>
<RCVPRT>LS</RCVPRT>
</EDI_DC40>
<xsl:variable name="pid" select="substring(.,1,1)"/>
But in the sxmb_moni the message is red with the error message :" converting to an ALE logical system"
Have you any idea?
With another interface I used a graphic Mapping and the same properties in the directory and it works.
Bye
Stefan

Hi togehter,
it works now, after cpa_cache and sxi_cache.
and and ...
<IDOCTYP>/XXX/018_XXXXX_XIDATEN</IDOCTYP>
<MESTYP>/XXX/018_XXXXX_XIDATEN</MESTYP>
Without: _-...
I would write a blog.
Does know one how that goes here?
Thanks
SDN is great
Stefan

XSLT Mapping error

Hi All
I am working on PI 7.1 where I have customized standard XSLT mapping according to my requirement.
I have to add 2 fields in the standard data type ReplenishmentOrder_Notfication from SNC 7.0 SWCV.
In standard scenario once IDOC STPPOD.DELVRY03 is released from ECC the PI scenario send this to SNC Proxy ReplenishmentOrderNotification_In.
In my requirement I have to send XML file generated from IDOC to one of Application Folder. I have customized data type, message type, operation mapping, service interface by coping standard things.
So the changes I have done in standard XSLT mapping are just changin name of data type and not added any mapping for the two new fields I have added to the data type as its not require at the moment.
When I am running test I am getting follwoing error in Trace. Here please notice that its mentioning standard xslt mapping program name only though on the top you see customized names.
Please give your inputs to resolve the issue. Thanks.
Operation Mapping
StppodDelvry03_MT_ReceivedDeliveryNotification_01
Name
StppodDelvry03_MT_ReceivedDeliveryNotification_01
Namespace
http://sap.com/xi/SNC/Global
Runtime error
TransformerException occurred during XSLT mapping StppodDelvry03_ReceivedDeliveryNotification_01 (http://sap.com/xi/SNC/Global, 46c20a71-248e-11dc-c4be-dd500a115642, -1)
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace> <Trace level="1" type="T">Interface Mapping http://sap.com/xi/SNC/Global StppodDelvry03_ReceivedDeliveryNotification_01 </Trace> <Trace level="1" type="T">TransfromerException during XSLT processing: Thrown: javax.xml.transform.TransformerException: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(, row:1, col:8)(, row=1, col=8) -> com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(, row:1, col:8) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:251) at com.sap.aii.ib.server.mapping.execution.AbstractMappingTransformer.transform(AbstractMappingTransfor
Edited by: Amol on May 22, 2009 3:26 PM

Hi Amol
for the error CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace> <Trace level="1" type="T">
just check this Thread issue is solved by restarting the service verifySenderAgreement
at thread
Re: Wrong Sender Agreement
Thanks
Abhishek

ERROR WHILE USING XSLT MAPPING IN INTERFACE MAPPING

Hi,
We are using an xslt mapping in our scenario but while i load the XSLT mapping in the interface mapping i get a message :
Transformer configuration exception occurred when loading XSLT
sorce interface :outbound and asyncronous.
mapping : XSLT mapping (imported as a zip file)
target interface: abstract,asyncronous.
The xslt runs well in standalone and its well formed and there is no name space issue.
please help if any one has faced such a situation while using XSLT mapping.
regards,
Anirban.

Hi Anirban
When you say it runs well standalone what exactly do you mean? Which XSLT processor are you using to run it? There are subtle difference between XSTL processors that can sometimes result in incompatibilities. For instance, I have seen XSLTs run correctly in XMLSpy but incorrectly (or at least slightly differently) in XI.
Regards,
Thorsten

Error in XSLT Mapping when special character is passed through

Hi Experts,
We have used the XSLT mapping. When ever any special character like é is being passed, then the below mentioned error is displayed in the Integration engine.
Error occurred during XSLT mapping of the application
It is working fine with normal case if we are not sending any special character.
I am not sure whether the problem exists in XSLT mapping or the issue with the legacy system?
Early response would be highly appreciated and points will be awarded.
Thanks in Advance,
Jitender

hi,
[Problem in transforming XML to string using XSLT;
Chk the above link.might solve ur issue.
Regards.
Siddhesh Naik

Error in XSLT mapping while using string functions

Hi All,
While using tokenize() and substring-before() functions in XSLT mapping,we are getting an error.The error message is Unexpected symbol "" So while using string functions in XSLT mapping do we have to use any header functions.
Please through light on syntax etc.,of string functions in XSLT.
Thanx in advance,
Lokesh Dhulipudi
Edited by: LOKESH DHULIPUDI on Dec 27, 2007 7:32 AM

Hi,
Hope you have gone thru this help:
http://w3schools.com/xsl/default.asp
Rgds, Moorthy

Problem with Dynamic Configuration in XSLT mapping..!!

Hi friends,
Working first time with xslt map.I am doing a Idoc to File scenario in which I need to pass Idoc number as the file name dynamically. Right now I am just trying to send some constant value 'ABCD' to go in dynamic attribute filename.
I used the code which has been provided over here.
[http://help.sap.com/saphelp_nw04/helpdata/en/43/03fe1bdc7821ade10000000a1553f6/frameset.htm|http://help.sap.com/saphelp_nw04/helpdata/en/43/03fe1bdc7821ade10000000a1553f6/frameset.htm]
I just changed the "Directory" with "FileName" in the code. It is not generating the dynamic attribute http://sap.com/xi/XI/System/File
This is my xsl code. Please suggest me If iam doing anything wrong.
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:map="java:java.util.Map" xmlns:dyn="java:com.sap.aii.mapping.api.DynamicConfiguration" xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
 <xsl:output indent="no"/>
 *<xsl:param name="inputparam" select = "ABCD"/>*
 <xsl:output method="text" encoding="utf-8"/>
 <xsl:template match="/">
 
 <xsl:variable name="dynamic-conf" select="map:get($inputparam, 'DynamicConfiguration')"/>
 *<xsl:variable name="dynamic-key" select="key:create('http://sap.com/xi/XI/System/File', 'FileName')"/>*
 <xsl:variable name="dynamic-value" select="dyn:get($dynamic-conf, $dynamic-key)"/>
 <xsl:variable name="new-value" select="concat($dynamic-value, 'subfolder\')"/>
 <xsl:variable name="dummy" select="dyn:put($dynamic-conf, $dynamic-key, $new-value)"/>
 
 <xsl:copy-of select="."/>
 </xsl:template>
 <xsl:template match="/">
Waiting for your answers.
Thank you.
Deepthi.

Hi Stefen,
I tried the way you suggest but still I couldn't able to see the Dynamic Configuration attribute in SOAP document. I tried for Idoc number and even tried by passing just a value 'abcd' like below.
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:map="java:java.util.Map" xmlns:dyn="java:com.sap.aii.mapping.api.DynamicConfiguration" xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
 <xsl:output indent="no"/>
 <xsl:output method="text" encoding="utf-8"/>
 *<xsl:param name="inputparam"/>*
 *<xsl:param name="new-value">*
*<xsl:value-of select="/WMMBID01/IDOC/EDI_DC40/DOCNUM" />*
*</xsl:param>*
 <xsl:template match="/">
 
 <xsl:variable name="dynamic-conf" select="map:get($inputparam, 'DynamicConfiguration')"/>
 <xsl:variable name="dynamic-key" select="key:create('http://sap.com/xi/XI/System/File', 'FileName')"/>
 <xsl:variable name="dummy" select="dyn:put($dynamic-conf, $dynamic-key, $new-value)"/>
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:map="java:java.util.Map" xmlns:dyn="java:com.sap.aii.mapping.api.DynamicConfiguration" xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
 <xsl:output indent="no"/>
 <xsl:output method="text" encoding="utf-8"/>
 *<xsl:param name="inputparam"/>*
 *<xsl:param name="new-value" select="abcd">*
 *</xsl:param>*
 <xsl:template match="/">
 
 <xsl:variable name="dynamic-conf" select="map:get($inputparam, 'DynamicConfiguration')"/>
 <xsl:variable name="dynamic-key" select="key:create('http://sap.com/xi/XI/System/File', 'FileName')"/>
 <xsl:variable name="dummy" select="dyn:put($dynamic-conf, $dynamic-key, $new-value)"/>
Any suggestions please.
Thanks
Deepthi.

XSLT Mapping - Configuration error

Similar Messages

Maybe you are looking for