XSS SCA import in CMS error: failed to build

We are getting error when trying to build XSS Track in NWDI. There are 2 brocken DC for development track.
Here is the error message that we get:
Development Component Build (2008-11-28 22:04:10)
Component name: mss/mol
Component vendor: sap.com
SC compartment: sap.com_SAP_MSS_1
Configuration: <SID>_XSS_D
Location: <SID>_XSS_D
Source code location: http://server01:55100/dtr/ws/XSS/sap.com_SAP_MSS/dev/active/DCs/sap.com/mss/mol/_comp/
DC root folder: /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/DCs/sap.com/mss/mol/_comp/
DC type: Web Dynpro
Host: server01
DC Model check:
   All used DCs are available locally
   validating dependency to build plugin "sap.com/tc/bi/bp/webDynpro"
   validating dependency to public part "FloorplanManager" of DC "sap.com/pcui_gp/xssfpm"
   validating dependency to public part "default" of DC "sap.com/tc/wd/webdynpro"
   validating dependency to public part "default" of DC "sap.com/com.sap.exception"
   validating dependency to public part "default" of DC "sap.com/tc/ddic/ddicruntime"
   validating dependency to public part "default" of DC "sap.com/tc/col/api"
   validating dependency to public part "default" of DC "sap.com/tc/wdp/metamodel/content"
   validating dependency to public part "Isrlpd" of DC "sap.com/pcui_gp/isrlpd"
   validating dependency to public part "default" of DC "sap.com/com.sap.mw.jco"
   validating dependency to public part "default" of DC "sap.com/com.sap.aii.proxy.framework"
   validating dependency to public part "default" of DC "sap.com/tc/logging"
   validating dependency to public part "default" of DC "sap.com/com.sap.aii.util.misc"
   validating dependency to public part "FPMUtils" of DC "sap.com/pcui_gp/xssutils"
   validating dependency to public part "default" of DC "sap.com/tc/ddic/metamodel/content"
   validating dependency to public part "default" of DC "sap.com/tc/cmi"
   validating dependency to public part "FinUtils" of DC "sap.com/mss/finutils"
   DC model check OK
Start build plugin:
   using build plugin: sap.com/tc/bi/bp/webDynpro
   starting build plugin from : /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/DCs/sap.com/tc/bi/bp/webDynpro/_comp/gen/default/public/webDynpro/
Build Plugin 'WebdynproPlugin', Version 7.00 SP 16 (645_VAL_REL, built on 2008-06-09 20:46:40 CEST, CL83275)
   development component: mss/mol (sap.com)
      software component: SAP_MSS (sap.com)
       support component: EP-PCT-MGR-CO
                location: <SID>_XSS_D
                    type: Web Dynpro
           build variant: default
         output location: /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/DCs/sap.com/mss/mol/_comp/gen/default
       generation folder: /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/t/64CE6536D7BD962CDCB65DC8A7640047
       plugin start time: 2008-11-28 22:04:11 GMT-07:00 (MST)
                 Java VM: Java HotSpot(TM) Client VM, 1.4.2_12-b03 (Sun Microsystems Inc.)
General options:
convert *.xlf to *.properties: yes
include sources for debugging: yes
Warning: Source folder "META-INF" exists but is empty and will be ignored.
Warning: Source folder "src/configuration" exists but is empty and will be ignored.
Preparing data context..
No public part descriptor found for component "tc/wd/webdynpro" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "com.sap.exception" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "tc/ddic/ddicruntime" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "tc/col/api" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "tc/wdp/metamodel/content" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "com.sap.mw.jco" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "com.sap.aii.proxy.framework" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "tc/logging" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "com.sap.aii.util.misc" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "tc/ddic/metamodel/content" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "tc/cmi" (vendor "sap.com"), public part "default", using legacy mode.
No 'default' JDK defined, will use running VM.
Data context preparation finished in 0.934 seconds
Creating Ant build file..
Creating output file: /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/DCs/sap.com/mss/mol/_comp/gen/default/logs/build.xml
Using macro file:     /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/DCs/sap.com/tc/bi/bp/webDynpro/_comp/gen/default/public/webDynpro/macros/build.vm
Build file creation finished in 1 second
Starting Ant..
Using build file:     /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/DCs/sap.com/mss/mol/_comp/gen/default/logs/build.xml
Using build target:   build
Using Ant version:    1.6.2
compile:
      [echo] Starting dictionary generator
     [ddgen]
     [ddgen] [Info]    Property deployment is true: Deployment information is provided!
     [ddgen] [Info]    Property sourcepath: /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/DCs/sap.com/mss/mol/_comp/src/packages
     [ddgen] [Info]    Property targetpath: /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/t/64CE6536D7BD962CDCB65DC8A7640047/gen_ddic
     [ddgen] [Info]    Property archivename: sap.commssmol
     [ddgen] [Info]    Property vendor: sap.com
     [ddgen] [Info]    Property dcname: mss/mol
     [ddgen] [Info]    Property projectlanguage: de
     [ddgen] [Info]    Property language: Available languages are automatically determined!
     [ddgen] [Info]    Property addpaths ...
     [ddgen] [Info]    Generating datatypes/com/sap/mss/mol/monitor/model/types/MolModel.gdictionary
     [ddgen] [Info]    Generating datatypes/com/sap/pcuigp/xssutils/objectselection/model/types/FcObjectSelection.gdictionary
     [ddgen] [Info]    Generating datatypes/com/sap/pcuigp/xssutils/pernr/model/types/RHXSS_SER_EMPLOYEE.gdictionary
     [ddgen] [Info]    Generating dbtables/sdmDeployDd.xml
     [ddgen] [Info]    Generation finished (8 seconds)
     [ddgen]
     [timer] Dictionary generator finished in 8.499 seconds
      [echo] Starting WebDynpro generator
     [wdgen]
     [wdgen] [Info]    Property deployment is true: Deployment information is provided!
     [wdgen] [Info]    Property sourcepath: /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/DCs/sap.com/mss/mol/_comp/src/packages
     [wdgen] [Info]    Property targetpath: /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/t/64CE6536D7BD962CDCB65DC8A7640047/gen_wdp
     [wdgen] [Info]    Property archivename: sap.commssmol
     [wdgen] [Info]    Property vendor: sap.com
     [wdgen] [Info]    Property dcname: mss/mol
     [wdgen] [Info]    Property projectlanguage: de
     [wdgen] [Info]    Property language: Available languages are automatically determined!
     [wdgen] WARNING: Metadata of component FcLineItemMonitor is not valid! Component "//WebDynpro/Component:com.sap.mss.mol.monitor.FcLineItemMonitor", Role "ComponentController": A minimum of 1 object(s) is required
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView rulename_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView count_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView evaldate [text]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView evaltime_2 [text]: Context element and property are not compatible
     [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> TransparentContainer tcActionBar [Children]: Container does not contain children
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> Button btnEditRule [visible]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> Button btnCreateRule [visible]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> Button btnCopyRule [visible]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> Button btnDeleteRule [visible]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> Button btnPersonalize [visible]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView itemtxt_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> LinkToURL verakUser_url [text]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> LinkToURL verakUser_url [reference]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView itemdate_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView value_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView waers_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> Image confirmedImage [tooltip]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> Image confirmedImage [alt]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> Image confirmedImage [source]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView actionTaken_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView tvCurrency [text]: Context element and property are not compatible
     [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> TransparentContainer DetailContainer [Children]: Container does not contain children
     [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> UIElement UpdateTrigger [enabled]: Context element and property are not compatible
     [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView tvStatus: UIElement does not have a label
     [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView evaldate: UIElement does not have a label
     [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView evaltime_2: UIElement does not have a label
     [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> LinkToAction LinkUpdate: UIElement does not have a label
     [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView tvUpdateRunning: UIElement does not have a label
     [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> Caption RuleGroup_Header: UIElement does not have a label
     [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView tvCurrency: UIElement does not have a label
     [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> Caption Details_Header: UIElement does not have a label
     [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> Caption ItemDetails_Header: UIElement does not have a label
     [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> TextView rulename_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> TextView ruleid_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> InputField inDescription [value]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> CheckBox cbShowAlert [checked]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> DropDownByKey ddKF1 [selectedKey]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> DropDownByKey ddSign [selectedKey]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> InputField inLimitAbs [value]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> DropDownByKey ddAbsRel [selectedKey]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> InputField InputTimestamp [value]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> Tree treeObject [title]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> Tree treeObject [tooltip]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> Tree treeKfspecgl [title]: Context element and property are not compatible
     [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> Tree treeKfspecgl [tooltip]: Context element and property are not compatible
     [wdgen] [Info]    com.sap.mss.mol.monitor.RuleMaintView --> Caption tableRulesHeader: UIElement does not have a label
     [wdgen] [Info]    com.sap.mss.mol.monitor.RuleMaintView --> CheckBox cbShowAlert: UIElement does not have a label
     [wdgen] [Warning] com.sap.mss.mol.monitor.RuleMaintView --> DropDownByKey ddSign: UIElement does not have a label
     [wdgen] [Warning] com.sap.mss.mol.monitor.RuleMaintView --> InputField inLimitAbs: UIElement does not have a label
     [wdgen] [Warning] com.sap.mss.mol.monitor.RuleMaintView --> DropDownByKey ddAbsRel: UIElement does not have a label
     [wdgen] [Info]    Catching throwable null
     [wdgen] [Info]    com.sap.webdynpro.generation.ant.GenerationAntTaskError
     [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.showCheckResult(GenerationAnt.java:157)
     [wdgen]      at com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildController.java:207)
     [wdgen]      at com.sap.tc.buildcontroller.CBSBuildController.main(CBSBuildController.java:168)
     [wdgen] ERROR: Unknown exception during generation null (com.sap.webdynpro.generation.ant.GenerationAntTaskError)
     [wdgen] ERROR: Generation failed due to errors (7 seconds)
Error: /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/DCs/sap.com/mss/mol/_comp/gen/default/logs/build.xml:99: [Error]   Generation failed!
     at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:254)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
     at org.apache.tools.ant.Task.perform(Task.java:364)
     at com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildController.java:207)
     at com.sap.tc.buildcontroller.CBSBuildController.main(CBSBuildController.java:168)
Ant runtime 16.597 seconds
Ant build finished with ERRORS
[Error]   Generation failed!
Error: Build stopped due to an error: [Error]   Generation failed!
Build plugin finished at 2008-11-28 22:04:32 GMT-07:00 (MST)
Total build plugin runtime: 20.648 seconds
Build finished with ERROR
What can be done to resolve these error and trigger the build again.
Bhavin

Resloved with SAP help.
1. Ran configuration wizard for CBS, CMS & DTR
2. Changes few JVM parameters (increased heap size, jdbc pool size)

Similar Messages

Gem::Ext::BuildError: ERROR: Failed to build gem native extension.

I can't install gem pg:
Gem::Ext::BuildError: ERROR: Failed to build gem native extension.
/home/alex/.rvm/rubies/ruby-2.1.1/bin/ruby extconf.rb
checking for pg_config... no
No pg_config... trying anyway. If building fails, please try again with
--with-pg-config=/path/to/pg_config
checking for libpq-fe.h... no
Can't find the 'libpq-fe.h header
*** extconf.rb failed ***
Could not create Makefile due to some reason, probably lack of necessary
libraries and/or headers. Check the mkmf.log file for more details. You may
need configuration options.
Provided configuration options:
--with-opt-dir
--without-opt-dir
--with-opt-include
--without-opt-include=${opt-dir}/include
--with-opt-lib
--without-opt-lib=${opt-dir}/lib
--with-make-prog
--without-make-prog
--srcdir=.
--curdir
--ruby=/home/alex/.rvm/rubies/ruby-2.1.1/bin/ruby
--with-pg
--without-pg
--with-pg-config
--without-pg-config
--with-pg_config
--without-pg_config
--with-pg-dir
--without-pg-dir
--with-pg-include
--without-pg-include=${pg-dir}/include
--with-pg-lib
--without-pg-lib=${pg-dir}/lib
extconf failed, exit code 1
Gem files will remain installed in /home/alex/.rvm/gems/ruby-2.1.1/gems/pg-0.17.1 for inspection.
Results logged to /home/alex/.rvm/gems/ruby-2.1.1/extensions/x86_64-linux/2.1.0/pg-0.17.1/gem_make.out
In Ubuntu I can do this
$ sudo apt-get install ruby-dev build-essential
and it will the same issue. But in Arch I can't because these don't exist.
I also have libmariadbclient installed.

You can do:
Step1: You choose "Tools" -> Library Manager -> J2ME Ant Extension
Step2: in tab Classpath, you remove "C:\Program Files\netbeans-5.5\mobility7.3\modules\org-netbeans-modules-kjava-antext.jar"
Step3: You add again "C:\Program Files\netbeans-5.5\mobility7.3\modules\org-netbeans-modules-kjava-antext.jar"
Step4: Then you build your application again.
It'll build normally.
I tried.

ESS/XSS Web Dynpro SCA import in CMS to view/modify Web Dynpro Source Code

I am having problems importing ESS/XSS Web Dynpro related SCA's into CMS.
Following steps were followed
1. Download following files from SAP service marketplace.
BPERP4ESS0_0-10003146.sca
ESS09_0-10002965.zip ( This file shows as SCA in the download page but download as with .zip)
PCUIGP009_0-20000568.zip ( This file shows as SCA in the download page but download as with .zip)
Question: Is this correct, did I get all I need? Do I need to download any more files?
2. Deployed above files using SDM.
3. Created a product in SLD and defined software component dependencies(SAP_BUILDT, SAP_JTECHS, SAP-JEE) I could define any of the above files(BPERP4ESS0_0-10003146, ESS09_0-10002965,PCUIGP009_0-20000568) as software dependencies as I could find in the software catlog.
Question: Should this files show up in the software catlog? If yes what should I do?
4. Created a track in CMS.
5. Added software components for development defined in the SLD. Above files doesn't show up under sap.com to be added as development component. I already copied BPERP4ESS0_0-10003146.sca, ESS09_0-10002965.zip,PCUIGP009_0-20000568.zip to D:\usr\sap\JTrans\CMS\inbox.
Question: How do I add this files to development components??
5. All other required Software Components(SAP_BUILDT, SAP_JTECHS) were automatically added when I added the development component.
What should I do so ESS09_0-10002965.zip,PCUIGP009_0-20000568 would show up under sap.com vendor component list??
Any help on this is greatly appericated.
Thanks!!

Hi,
Did you receive a response to this question? We are having the same problems whilst following some instructions we received from SAP's OSS titled the JDI cookbook for ESS.
When defining a track in the CMS the software components SAP_ESS and SAP_MSS are not in the list for vendor sap.com. Yet we use the standard ESS and MSS portal content delivered by SAP.
How do we get these components in the list so that we can select them?
Thanks in advance.

PI 7.11: Import of CTS+ transport fails (Integration builder only)

Hi,
I've released a transport from DEV to QUAL system.
I've imported via STMS.
But I don't see the transported objects.
The imported change list is already closed and I cannot activate the contained objects.
There's no open change list available for my user.
When I try to transport those objects again, I get an error in STMS:
com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Unable to transfer object Configuration Scenario SetEmployeeSOAP (DirContext) to change list 'XI 7.1 Import' (c6a9ea7b-57db-11e1-a930-000025876142) since object is already in your change list 'XI 7.1 Import' (e1586c72-57c2-11e1-bf9c-000025876142).
How can I activate the objects contained in the mentioned change lists?
Thanks in advance!

Unfortunately, I've crowned too early
The target systems are not filled in correctly.
We have a 3-tier environment (DEV, QUAL, PROD).
I've setup the same SLD settings in SLD in DEV and QUAL system.
SAP_DEV has target SAP_QUAL and SAP_QUAL has target SAP_PROD.
But in the scenario that I've imported into PI QUAL it didn't replace SAP_DEV with SAP_QUAL (e. g. in CC, Receiver determination etc.).
What can be the reason for that?
Are my target settings not correct?

Failed when build petalinux

Is anyone faced such issue before?
root@rfswhz-HP:/home/rfswhz/Desktop/mypetalinux/Xilinx-ZC706-2015.2# petalinux-build
INFO: Checking component...
INFO: Generating make files and build linux
INFO: Generating make files for the subcomponents of linux
INFO: Building linux
[INFO ] pre-build linux/rootfs/fwupgrade
[INFO ] pre-build linux/rootfs/peekpoke
[INFO ] pre-build linux/rootfs/uWeb
[INFO ] build system.dtb
[INFO ] build linux/kernel
[INFO ] update linux/u-boot source
[INFO ] generate linux/u-boot configuration files
[INFO ] build linux/u-boot
[INFO ] build zynq_fsbl
[INFO ] Setting up stage config
[INFO ] Setting up rootfs config
[INFO ] Updating for cortexa9-vfp-neon
[INFO ] Updating package manager
[INFO ] Expanding stagefs
[INFO ] build linux/rootfs/fwupgrade
[INFO ] build linux/rootfs/peekpoke
[INFO ] build linux/rootfs/uWeb
[INFO ] build kernel in-tree modules
[INFO ] modules linux/kernel
[INFO ] post-build linux/rootfs/fwupgrade
[INFO ] post-build linux/rootfs/peekpoke
[INFO ] post-build linux/rootfs/uWeb
[INFO ] pre-install linux/rootfs/fwupgrade
[INFO ] pre-install linux/rootfs/peekpoke
[INFO ] pre-install linux/rootfs/uWeb
[INFO ] install system.dtb
[INFO ] install linux/kernel
[INFO ] update linux/u-boot source
[INFO ] generate linux/u-boot configuration files
[INFO ] build linux/u-boot
[INFO ] install linux/u-boot
[INFO ] Expanding rootfs
[INFO ] install sys_init
[INFO ] install linux/rootfs/fwupgrade
[INFO ] install linux/rootfs/peekpoke
[INFO ] install linux/rootfs/uWeb
[INFO ] install kernel in-tree modules
[INFO ] modules_install linux/kernel
[INFO ] post-install linux/rootfs/fwupgrade
[INFO ] post-install linux/rootfs/peekpoke
[INFO ] post-install linux/rootfs/uWeb
[INFO ] package rootfs.cpio to /home/rfswhz/Desktop/mypetalinux/Xilinx-ZC706-2015.2/images/linux
[INFO ] Update and install vmlinux image
[INFO ] vmlinux linux/kernel
[INFO ] install linux/kernel
[INFO ] package zImage
[INFO ] zImage linux/kernel
[INFO ] install linux/kernel
[ERROR] ERROR: Invalid ELF file '/home/rfswhz/Desktop/mypetalinux/Xilinx-ZC706-2015.2/images/linux/vmlinux'
[ERROR] make[1]: *** [package-subsystem-FIT] Error 255
ERROR: Failed to build linux

What is the Linux distribution you are using?
I have seen this error in RHEL 6.5 in which few packages are missing, can you try installing the below packages and see if that helps?
openssl-devel.x86_64
openssl098e.x86_64
Regards,
Achutha

RDW-Failed to build dimension temp tables

Hi Experts,
I am facing below issue while batch execute in RDW,
Batch: ttltypdm
Error: ttltypdm 07:29:47: ERROR: Failed to build dimension temp tables
Please Help
Regards

Hi,
can you please share the ttltypdm.ttltypdm.txt.DDMMYYYY file content or it is the one you've stated?

PowerPivot Error "Failed to connect to the server. Reason: Unspecified error" when importing other files

I have been getting the error below on a regular basis when attempting to import Excel, Text, or Access files.
I'm running Office 2010 (SP1), and PowerPivot (SP1). After reading a similar thread I reinstalled PowerPivot. It worked until I closed Excel. Now it recuses to allow import or update of these files. I really need it to work. Anyone have an solution or even
something to try - other than uninstalling and reinstalling PowerPiviot everytime I need to import or refresh files?
Thanks,
============================
Error Message:
============================
Unspecified error
Failed to connect to the server. Reason: Unspecified error
============================
Call Stack:
============================
   at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
   at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
   at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.OleDb.OleDbConnection.Open()
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open(String& connectionIdentifier)
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open()
   at Microsoft.AnalysisServices.Common.DataSourceBasic.TestConnection()
   at Microsoft.AnalysisServices.Common.DataSourceBasic.ClickTestConnection(Object progressControl)
============================

Hi San,
What's the version of your PowerPivot? Please refer to the article to check the version of PowerPivot for Excel:
http://powerpivot-info.com/post/89-q-how-can-i-check-what-version-of-powerpivot-for-excel-is-installed-on-my-machine
We can download the latest PowerPivot for Excel version from:
http://www.microsoft.com/en-us/download/details.aspx?id=29074
In addition, please help to collect windows events log information to us for further investigation. If you cann't import Excel, TEXT or Access data into PowerPivot data model, you can try to directly copy your data into it.
Regards,
Elvis Long
TechNet Community Support

Error - Failed to import Content Inventory

Hello all,
I'm having an issue uploading a SCORM elesson created to our LMS, and I'm hoping that one of the wise people out there may be able to help me out.
The project setting used, are the same as I've previously had success using.
There is no object outside of the stage.
The naming of the file project is ver simeple... 2 letters.
There is no Quiz.
Whilst trying to upload the zipped file to our LMS, I get this error:
The upload of this document failed. Error discribtion:
Error Encountered
(43073) Failed to import Content Inventory: IT - IT Work Processes Introduction
(43269) Invalid content. (*)ERROR: Failed to extract the manifest file from content package. Possible cause: The markup in XML document (manifest file) preceding the root element is not well-formed.'
Any ideas anybody?
Thanks ahead of time

No sorry. I only use the pdf version to send to people for reviews. When it comes to publishing it to the LMS (SABA), I zip it with Captivate (with no pdf). The zip file contains the HTML/SWF Files etc. included below is my normal package, unzipped.
and this is the one I'm having problems with:

Import of gmail cert errors out - [ERROR]   - Failed import certificate: gmail

I am trying to use javamail to read mail from gmail. When I try to import the ssl cert from the comman line it errorsout
java -jar lib/javacloud.jar add-ssl-certificates -user user -serviceinstance serviceinstance -identitydomain identitydomain -path /Users/user/gmailssl/ssl.cer -datacenter us2 -alias gmail
[ERROR]   - Failed import certificate: gmail, content: -----BEGIN CERTIFICATE-----
            LS0tLS1CRUdJTiBDRVJUSUZJQ0FURS0tLS0tCk1JSUVkakNDQTE2Z0F3SUJBZ0lJ
            R2NNRjdqZVZNb0F3RFFZSktvWklodmNOQVFFRkJRQXdTVEVMTUFrR0ExVUUKQmhN
            Q1ZWTXhFekFSQmdOVkJBb1RDa2R2YjJkc1pTQkpibU14SlRBakJnTlZCQU1USEVk
            dmIyZHNaU0JKYm5SbApjbTVsZENCQmRYUm9iM0pwZEhrZ1J6SXdIaGNOTVRRd056
            RTFNRGcwTURNNFdoY05NVFV3TkRBME1UVXhOVFUxCldqQm9NUXN3Q1FZRFZRUUdF
            d0pWVXpFVE1CRUdBMVVFQ0F3S1EyRnNhV1p2Y201cFlURVdNQlFHQTFVRUJ3d04K
            VFc5MWJuUmhhVzRnVm1sbGR6RVRNQkVHQTFVRUNnd0tSMjl2WjJ4bElFbHVZekVY
            TUJVR0ExVUVBd3dPYzIxMApjQzVuYldGcGJDNWpiMjB3Z2dFaU1BMEdDU3FHU0li
            M0RRRUJBUVVBQTRJQkR3QXdnZ0VLQW9JQkFRQ3U0dk9yCkxneU5zSGljeEJPUmdP
            Mk9PZlhLeEVLYjgzME56TnU2ZWx1YmJmMVQ0NUdpbEIzZkhnRFFKRUxSeWRUUlpp
            bG8KRWZ2NzVBZzd1UlFNL00xdGsrMWgxOHdEcEpaZW0rekZtSmNzMzBjY0JOMjFD
            bkN2cXNJRVlKTXlZM2tjVjR2RAp4NDRieDZWdkVBbUo5L2tpRko3eFJVbENjaHU1
            WVZPRm9Wa01hRWF4M1VXYjVGdGk5cGU4VmdZZGFzdWs1M2FlCjhadUlyNHBGZXc5
            ZnJheE9lLzZMWEVhUE1TdzYyMktTV3B5Sy9HVWJhQXAwN2hWMTFjK0xWZ2psVURU
            Z0ErMmsKbkRpZ1dyZGIreUxMOUh2M1dOTFdqRUFIRldoRWNlNVF3VjNTTjhKTGdh
            M1JidzJOM2xxOWFma1F0T25rSmdkTQpVRzR4a1VIR3FzY2dnTURKQWdNQkFBR2pn
            Z0ZCTUlJQlBUQWRCZ05WSFNVRUZqQVVCZ2dyQmdFRkJRY0RBUVlJCkt3WUJCUVVI
            QXdJd0dRWURWUjBSQkJJd0VJSU9jMjEwY0M1bmJXRnBiQzVqYjIwd2FBWUlLd1lC
            QlFVSEFRRUUKWERCYU1Dc0dDQ3NHQVFVRkJ6QUNoaDlvZEhSd09pOHZjR3RwTG1k
            dmIyZHNaUzVqYjIwdlIwbEJSekl1WTNKMApNQ3NHQ0NzR0FRVUZCekFCaGg5b2RI
            UndPaTh2WTJ4cFpXNTBjekV1WjI5dloyeGxMbU52YlM5dlkzTndNQjBHCkExVWRE
            Z1FXQkJTYW5aQnZZK1JuajBIcXVKbWFlOUFKdndpQ3pUQU1CZ05WSFJNQkFmOEVB
            akFBTUI4R0ExVWQKSXdRWU1CYUFGRXJkQmhZYnZQWm90WGIxZ2JhN1locTZXb0V2
            TUJjR0ExVWRJQVFRTUE0d0RBWUtLd1lCQkFIVwplUUlGQVRBd0JnTlZIUjhFS1RB
            bk1DV2dJNkFoaGg5b2RIUndPaTh2Y0d0cExtZHZiMmRzWlM1amIyMHZSMGxCClJ6
            SXVZM0pzTUEwR0NTcUdTSWIzRFFFQkJRVUFBNElCQVFDVm9HQU9LWm9pbDRzTkFZ
            dmxiOXV4Tm1XcVFxeWgKcWwwRDFiZXdiTHhzM0RTVldTZTJEaFBqamhkTUhNVGNN
            cEIralF6QWJHeFZZaXVOTGRxTGwxWGNkZTdFVW1vMQpLSlVHelRPMDQ2aysxMUxZ
            Vk94RVhMQmU1czNGRituaUZKYnk3WEZnbUkzeU10NGJsSE41dEhtLzdKaWpMMUlw
            CnZrY3N5bk9uT3dBRUhlaEkxVTEyTjBKRXBrY29ldE02TUE4Y0d0bjc0RVBUYXM0
            TnBhK21UTm8zc2VIOGlZNDMKNEw0aG5zdWJYTWhjUVE5SVFNUHRLdVpZTlVYa2xO
            L05TMGY2OUJlKzNIUVJUT2xqdEN4ZHBtL3YvZW1IUGp3ZwovQ3d1KzU4ZlpLK2Zs
            UTFQUWNZMjRDZ3Q3RUYwUit1cW81SWwzQ0d1Q2dyZDRKeEpOTXVHY3NHUwotLS0t
            LUVORCBDRVJUSUZJQ0FURS0tLS0tCg==
            -----END CERTIFICATE-----
I noticed that the content within the CERT is different. Not sure if that is relevant.

I am not sure what the "store.connect()" does, based on the exceptions seems to be trying to make non-https connection which based on the documentation is not supported:
Unsupported Features
Alternative
Remote invocations with a transport protocol other than HTTPS (including plain text HTTP).
Not applicable.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Error in NWDI --- ERROR: failed to resolve reference

hello everybody,
i'm working with was 7.01
i configured my NWDI for a Internet Sales project.
In my SLD I added :
SAP J2EE ENGINE
SAP BUILD TOOL
SAP JAVA TECHNOLOGY SERVICES
WEB DYNPRO RUNTIME
when i try to create project from crm/home/shr/ext
But i have this error:
/userOut/Development Component (com.sap.ide.eclipse.component.provider.actions.dc.UsedDCFoundHandlerBase) [Thread[main,5,main]] ERROR: failed to resolve reference "sap.com/com.sap.mw.jco" for DC "sap.com_SAP-SHRWEB_1:sap.com/crm/home/shr/ext":Cannot find compartment of used component: sap.com:com.sap.mw.jco
I already did this step in other pojects and without problems .
I thought to forget something but i don't find missing step
any suggestion?
maybe i forget some SCA file?

HI,
it is not enough to check in the SCA files, but you also have to import them (CMS -- Transport Studio -- Development/Consolidation tabs). Else the corresponding DCs won't be part of the buildspace and so the dependencies cannot be resolved.
The DC sap.com/com.sap.mw.jco is located in the SCA file SAP-JEE. Most likely this SC is still displayed on the Development tab with status "Waiting for import" or "failed".
Best Regards,
Ervin

Import into Consolidation system failed

Hello,
We are on NW04s and tryign to import ESS component and other standard components like SAP_JEE,SAP_BUILDT into the Consolidation system and import fails in between with the CBS Log as:
Build number assigned: 7851
Change request state from QUEUED to PROCESSING
INTERNAL BUILD request in Build Space "D77_ESS11ADC_C" at Node ID: 778,177,350
     [id: 7,845; parentID: 7,539; type: 32]
REQUEST PROCESSING started at 2007-12-14 23:25:37.149 GMT
===== Pre-Processing =====
Calculate all combinations of components and variants to be built...
     "sap.com/ess/jp/fam" variant "default"
Prepare build environment in the file system... started at 2007-12-14 23:25:37.227 GMT
     Synchronize development configuration... finished at 2007-12-14 23:25:37.227 GMT and took 0 ms
Development line state verification started at 2007-12-14 23:25:41.336 GMT
Verification of the development line [ws/ESS11ADC/sap.com_SAP_ESS/cons/active/] SUCCEEDED
Development line state verification finished at 2007-12-14 23:25:41.352 GMT and took 16 ms
Cache verification, level 2 (Comparison of attributes) started at 2007-12-14 23:25:41.352 GMT
Verification of the following object:
     [DC: sap.com/ess/jp/fam, group: 0] SUCCEEDED
Cache verification finished at 2007-12-14 23:25:41.368 GMT and took 16 ms
     Synchronize component definitions... finished at 2007-12-14 23:25:41.446 GMT and took 4 s 219 ms
     Synchronize sources...
===== Pre-Processing ===== finished at 2007-12-14 23:25:50.227 GMT and took 13 s 78 ms
Change request state from PROCESSING to FAILED
ERROR! The following error occurred during request processing:java.lang.OutOfMemoryError
Unknown reason (java.lang.OutOfMemoryError)
REQUEST PROCESSING finished at 2007-12-14 23:25:50.243 GMT and took 13 s 94 ms
What can be dome to fix the OutOfMemory Error...?
Any help would be highly appreciated..

Hi Shikhil,
Please do the follwoing
1. Incrrease the memory size by navigating to Check the CBS settings in the Visual Administrator->Services->Component Build Service-> Tab 'Properties'
2.Refer to this thread
CMS Error importing into Consolidation System
3.SAP NOTE 723909
Thanks
Pankaj

ERROR: tax/calc: Build failed for . . .in variant "default": Used component

Hi Friends,
Could anyone help me in find the way to get rid of the above error.
I have installed and configured the JDI, and created a sample DC with java as mentioned in the help in the NWDS.
I created the DC, i have created Java package, but when tried to build the DC, i am getting the following :
"<i><b>
Nov 14, 2005 3:36:26 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: tax/calc: Build failed for deloitte.dc.com/tax/calc(mydeloitte.org_MYDELOITTECOMPONENT_1) in variant "default": Used component not found: sap.com/tc/bi/bp/javaLib</b></i> "
Please help me in this regard. Thanks for your time.
Thanks,
RP

Seems like the SAP_BUILDT SCA is missing from your track. Did you check-in and import all three SCA's (SAP_BUILDT, SAP_JTECHS and SAP-JEE)?
See http://help.sap.com/saphelp_nw04/helpdata/en/ab/6760b8d7b64b6eb74052eb5bdf1405/frameset.htm for more info.
Message was edited by: Pascal Willemsen

Explorer error "Failed to retrieve the Information Spaces list." from HANA

I am getting this dumb error "Failed to retrieve the Information Spaces list. // Request timed out" in Explorer's "Manage Spaces" area every time I click on the analytic view listed under my HANA sources of the Explorer. So, my HANA source is visible, and analytic views are visible in Explorer as well, but I cannot get any Information Space created because of the error, and I could not find the error and its causes in Explorer docs.
I already
- upgraded HANA db to Rev 18 (for some reasons I cannot u[grade this system to SPS3 yet) and BIP and Explorer 4.0 are on the latest Patch 8 of SP2.
- configured connection using IDT defined connection,
- restarted servers in CMS already 100s of times.
There is enough free space on the BO server's drive: 33GB. BO is a single server based on Win2008 R2 SP1 with 40GB RAM.
Any ideas what else I can do to get rid of this issue? It is a test server, so I cannot open customer msg to SAP Support.
Thanks,
-Vitaliy

Try increasing the timeout under
..\SAP BusinessObjects\Tomcat6\webapps\explorer\WEB-INF\classes\ default.settings.properties
from
request.timeout=60
to
request.timeout=600

Import from camera always fails for a number of images

Since recently (maybe update to Aperture 3.2 or Lion 10.7.2 or so), I have serious trouble when I import potos from my camera (it s a Canon 7D, but I got the very same issue when importing from my iPhone). Aperture (reproducible, always!) imports a number of photos correctly, then stops and displays the message "Import items Completed with Errors". If I them try to import again, it (as it should) only shows me the ones I have not imported succesfully so far, I click "Import" and the same thing happens: a few are imported successfully, a number fails. I have to repeat that a number of times, until it really imported all images from the camera.
I have tried using a different USB-cable (but as mentioned, it anyway also occurs with the iPhone, which uses a totally different cable); I tried repeairing permissions; I have checked and repaired the Aperture database; nothing worked so far!
The camera uses a CF-card, so I cannot import the photos via the SD card-reader...
This issue is really annoying; and unfortunatelly, it seems not to be very common, at least googeling did not reveal too many similar cases and none suggested a solution that would work for me so far :-(
Any advice is highly welcome!
Best,
Marco
PS: Image format is CR2 from the Canon and JPG from the iPhone...

Looks strange. Since at the end you can import all your files it seems not to be a wrong setting in Aperture (like do not import duplicates or something like). It should also not be tha cable or the sources since it happerns with both Canon and iPbhone.
To investigate I would suggest following steps to collect more info.
Have you tried to import to iPhoto instead than to Aperture ?
Where do you store the imported pictures ? Aperture should not allow to leave them on the source if you connect the camera to USB. I see you have both HD and SSD: try to change the location to store the pictures...
Try to load from card with a CF reader or to change the camera (in a good Photo Handler they could help you with the necessary hardware).
Could it be a energy saving setting on the MAC: after a while it stops loading from USB.
Sorry if I do not have better suggestions ....

IMac error: Failed to issue COM RESET

After my iMac got slower en and freezed i tried resetting the Pram and in single user mode i did *fsck -fy*
then i get the following error:
*Failed to issue COM RESET successfully after 3 attempts. Failing...*
after that nothing worked anymore!!! only the Windows vista partition worked for a day or two. is this a harddrive failure something worse?
Message was edited by: Birkhoff (title changed)

I believe posting relevant facts is productive, & a very relevant fact here is that you are trying to use a drive with an interface (SATA-II) that Apple does not currently support in its laptops.
SATA-I controllers are supposed to be compatible with SATA-II drives, but many of them are not. The problem is how some controllers implement auto negotiation, which is supposed to tell the drive to fall back to SATA-1 speeds with the slower controllers. Some SATA-II drives have a jumper to force the slower speed if auto negotiation doesn't work; some do not.
How this compatibility problem came about, & why the jumper is required, is complicated but the short version is that at least four different specification bodies had some responsibility in producing SATA specifications, & not all controllers were designed to the same standards. This includes not just the controllers Apple has been using but those in many PC's as well.
So I agree that Apple dropped the ball, but not necessarily the way you might think: it should have made it very clear that the firmware update implemented an unsupported interface speed, that it might cause problems, & (most importantly) provided a reversion strategy to the former firmware if it did.
Hopefully, Apple will take another 'swing' at this & either provide that reversion strategy or a new update that at least allows the controller to work more reliably with the faster interface. But until then, unless your drive has the jumper, my previous suggestion is probably the best you can do.
BTW, none of the current mechanical drives available for laptops can saturate a SATA-1 bus except for brief bursts from the drive's buffer, so the real loss in performance of running a single SATA-II drive at SATA-1 speeds is almost negligible, something you might notice in a benchmark but not in real-world use.

XSS SCA import in CMS error: failed to build

Similar Messages

Maybe you are looking for