Y-axis on bar chart showing all zeros

I have created a bar-chart in version 1.6 -- and the y-axis values that correspond with the gridlines all show 0.000. The graph is representing the cost/pound so the values will never be whole numbers and always less than 1. The data point values are all correct.
The data label format is 9.999 and shows up correct.
The Y axis format is the same way --
Define axis interval: Y axis interval is 0.05 with min: 0.000 and max 0.250.
What is wrong?
Regards,
Jeff

Is this an issue with Html DB? 1.6? Has anyone else had this problem?
Any help would be appreciated.

Similar Messages

  • 3.1 Stacked bar chart shows no color by default - Override possible?

    I noticed in Studio 3.1, stacked bar charts show no color by default. I also read in the documentation that this is the default behavior:
    "The chart is initially displayed with no color dimension selected. End users can then select a color dimension. The chart is also reset to display without a color dimension whenever the chart configuration is changed."
    I noticed that the chart is also reset to display no color when the user logs off. This is rather annoying for users if they must select the color indicator on all charts every time they log on. Is there a way to override this default so that the chart displays color by default? That's how it worked in 3.0.

    Unfortunately, this can't be overridden for 3.1. We have heard similar feedback from others, and are looking into it for the future.

  • Calculated column shows all zeros in cross tab discoverer report

    Hi
    I have a calculated column in a cross tab report which shows all zeros, but when i duplicate the report as 'table' the calculated colun is getting populated.
    i did not understand why it is doing like that, are there any special privileges or any special settings required for creating a cross tab report.

    Hi,
    No there is no special privs for cross tab but there is an aggregation issue.
    There are some methods of aggregations used in the discoverer.
    First thing you can so is to make sure that in the cross tab sheet you use the detailed data points and that you are not combining different levels of aggregations (for example one amount in details and another one summed).
    Second thing you can try is to change the aggregation for this worksheet, you can do that by going to the worksheet properties to the aggregation tab and try to change the settings.
    Third thing is to check the pref.txt file in the application server and set "AllowAggregationOverRepeatedValues" to 1
    BTW also search your data and find whether you got NULL values in the aggregated items, if so then wrap the data points with NVL function.

  • Stacked bar chart showing zeros when there is no data

    Hi,
    I am developing a stacked bar chart which plots month vs sales of 3 different products.
    I am showing data points and the total sales on chart.  Every thing looks good except the zeros displayed on the chart if there are no sales for a product for a particular month... how to get rid of these zeros ? i mean how to display the value only if there is some data ?
    Thanks

    Sounds like you have a left outer join from your product table to the sales data. Thus product is listed even when no data present.
    Try changing join to Equal
    Ian

  • Date Axis Line/bar Chart not working properly when rendering through SDK

    Hi all,
    When i render a existing Crystal report 2011 through java SDK code(Eclipse) bar chart is working fine, But the Date Axis line chart is not displaying properly. the properties are getting changed.. Any clue how to handle this? Do we have particular jar for Chart?
    Thanks in Advance!
    Regards,
    Mirthu

    Hi Mirthu
    I moved your post to the SAP Crystal Reports, version for Eclipse SCN Space. Unfortunately, all I know about Java is that it's in the cup in front of me . But I will get someone to have a look that should be able to help you ASAP.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada

  • Display ISO week number instead of date on x axis in Bar Chart

    Hi,
    I've created a simple SSRS report based on bar chart that shows several milestones. Everything works fine for me except I’m not able to convert the date into ISO week number format.
    I played around with different approaches. I was able to convert the date into an ISO week Format directly on the SQL Server. That
    wasn't a problem.
    But unfortunately I’m not able to display the week number on the horizontal axis in my Bar Chart. I tried both fields: TaskFinishDate and TaskFinishDateMS...
    I would like to show the ISO week number instead of the date within the Bar Chart on the horizontal axis.
    Any ideas/hints/help is really appreciated!
    Thanks,
    Mike

    Hi Mike,
    Per my understanding that you want to get the week number of the year based on the field "TaskFinishDate" which is datetime type and display the week number in the x-axis instead of the field "TaskFinishDate", right?
    I have check the snapshot you have provided and it seems you have change the format of the datetime field in the x-axis like "dd.MM.YYYY", If you can't make the week number to display correctly in the x-axis, the issue can be caused by you haven't
    change the format to Number in the category.
    Details information below for you reference:
    I assume you have use expression in the Label like below to convert the datatime TaskFinishDate in to ISO week number like below:
    =DatePart(DateInterval.WeekOfYear,Fields!TaskFinishDate.Value）
    or
    =DatePart("ww",Fields!TaskFinishDate.Value）
    Right click the X-axis and select the "Horizontal Axis Properties", then click the Number to change the format to "Number" as below:
    Preview you will get the weeknumber display in the x-axis correctly.
    If you still have any problem, please feel to ask.
    Regards,
    Vicky Liu
    If you have any feedback on our support, please click
    here.
    Vicky Liu
    TechNet Community Support

  • Can we fix the Y axis in Bar chart ?

    Hi All,
    I have a bar chart in which the width of X axis is dynamic because i am using many months data.
    But wen i am doing preview,my chart area is moving towards left.
    Can  we fix the y axis ,I mean the area of chart should not move.Only X axis can be stretched according to the number of months we have in x axis ?
    Thanks in advance.
    Regards
    msbilearning

    Hi msbilearning,
    According to your description, you want to have your Y-axis fixed in the bar chart area and the X-axis grows from from left to Right. Is my understanding correct?
    In Reporintg Services, when creating a chart, we can set the DynamicWidth of the chart which can make our chart expands dynamically with the numbers of categories.  In this scenario, we also need to ennable the CustomPosition of chart, set a specific
    value for top and left properties so that the Y-axis will be fixed. For detail steps, please see the two blogs below:
    Charts with Dynamic Height or Width based on Categories/Data
    Handling Dynamic Height and Width in an SSRS Bar Chart
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • The fax confirmation report shows all zeros for officejet 6600 printer

    the fax confirmation page shows all zeors for date and time.  How do I set the printer so it prints the correct date and time?

    Hi CJChristian,
    Welcome to the HP Forums!
    I understand that your confirmation date and time fields are all zeroes with your HP Officejet 6600, and I am happy to help you!
    Please take a look through this guide. Setting Up the Printer Hardware for HP Officejet 6600 and 6700 Premium H711n e-All-in-One Printers. Select the Officejet 6600, and look for Step Seven Set the Date and time.
    Also this guide may help too. Setting up the HP All-in-One to Send and Receive Faxes.
    Hope these guides are useful for you, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • My Query is showing all Zero values.

    Hello all,
    I have the recent data in my cube, but my query is not showing the values, it is only showing zero. Still yestarady it was fine , all of a sudden today it happened, what could be the problem?
    Thanks.

    Hi mohan satish
    Just a very wild guess!
    Seems like you posted your issue on 1st October and you have stated that till yesterday(means sept 30) everything was working fine.
    I guess you are working with the HR module reporting. As of my understanding, HR R/3 system records a specific period of validity for each Info type.
    Does your issue have anything to do with the Validity period?
    BR
    Prabhith

  • Stacked bar chart to show vertically

    I want to show stacked bar chart vertically.
    Requirement is
    Mat1 - WIP Qty 14, Inv 20, Finished 22 
    Mat2 - WIP Qty 16, Inv 10, Finished 18  
    We want to display chart where Material will be displayed on Y-axis and diffrent Qty will be shown as one bar for each material stacked like stacked bar starting from left to right.
    We did this using stacked bar but in that case the material will be displayed on X-axis and bar is showing from bottom to top. Is there any way we can rotate this chart by 90 degree?
    Nilesh Modi

    Hi Nilesh,
    I do not believe that there is an out-of-the-box feature that would suffice your needs.
    However, the work-around is relatively simple, although it needs a bit of coding.
    If you are sourcing the image directly, the image could be refreshed using Javascript settimeout function.  If you are sourcing the location of the image from an iCommand, you could use the update event of the applet.
    Besides ... if everything was too easy, there would be no need for you and I
    Cheers,
    Jai.

  • Data values on Bar Chart in a BI Publisher report (11g)

    I have a bar chart that I created via the layout editor in BI Publisher 11g, and I'm displaying the data values on the chart. That part works great. However, we're noticing that the chart adds zeros to the end of the data values depending on the length of the number being passed to the chart. My data item is a number that is 5 bytes in total, with 2 decimals. If the data value is *10.10*, the data displayed on the bar chart shows *10.10*. But when my data value is *1.10*, the data displayed on the bar chart is *1.100*. And if my data value is *.10*, the bar chart displays *0.1000*. The bar chart adds zeros to the end as the number of characters to the left of the decimal decreases.
    I don't see a way to make it not do that. Has anyone else run into this, and been able to change it?

    Basically what are you trying to do :
    Attaching Mutiple Data Definition to a XML Program and deciding which one to call ased on parameter.Sorry you can not do that one Data DEfinition per Report.
    ut there is one way of doing that.
    Create multiple data defintion( mutiple programs) and then a master program something like
    IF Master Program Param1 = 'X'
    call BI Program 1
    ELSIF Master Program Param1 = 'Y'
    call I Program 2....
    End IF;

  • Fine-grained control of colors in a bar chart

    Hello,
    Short version: How do I control the colors of the bars in a bar chart in Keynote, so that each bar, representing a particular entity, retains its color no matter its position relative to the other bars after updating the chart?
    Detailed version: I am using iWork '09. In Keynote I have a 3D bar chart showing an indicator for different companies (industry comparison). The companies are sorted in ascending order by revenue, so that the lowest bar (company with smallest revenue) is to the far left and the tallest - to the far right. I update the chart regularly. I have the following problem: each bar, representing a company, is in a particular color. When I update the chart, if the the order of the companies changes, the colors of the bars do not change, so that in the new chart the order of the colors is the same, although some or all of the bars now represent different companies. In other words: if in version 1 company A is in red and comes before company B which is in blue, if in the next version company A comes after company B, I want its bar to still be red. In the current situation, if company A comes after company B its bar will be blue and comapny B's will be red, i.e. red still comes before blue.

    I have to give up the beautiful colors of the automatic chart and only use the restricted number of colors from the color well.
    There is no restricion in the choice of colour, the colour depth on a Mac has over 16 million to choose from.
    Further, the fill type has options for;  colour, gradient, image and tint

  • BO 4.0 Web Intelligence, Error: Column Chart shows not the whole data

    Hello,
    I want to create a case study in BusinessObjetcs 4.0 (Web Intelligence) with a column chart.
    Year is the Category Axis and Revenue is the Value Axis.
    Unfortunately the resulting chart shows only the year 2008.
    If I choose Month as Regional Color the chart shows all years (2008-2011).
    What I do wrong? Or is this a bug?
    Thank you!
    Best regards,
    Wladimir

    Hi again,
    What I think is that there simply isn't data in the report other than the 2008,
    or at least the combination of the section master/year only has 2008 data.
    If that is not what you expect and there should be more data, also when looking specifically at the values for just this section,
    then you could check if you may be have incomplete query results. Standard they will be limited to 5000 rows, unless your universe designer decides otherwise.
    Check the number of rows returned (free cell with query details),
    if it is 5000 (or any other nice round figure) have a chat with the universe designer.
    Good luck,
    Marianne

  • Stacked Bar chart does not overlap series

    I have a stacked bar chart with to values "Invoiced" and "Budget" and 2 categories YEAR and MONTH - the problem is that the bar chart shows the values Invoiced and Budget in Top of each other and Not overlapping each other . ex:
    NOW:  Invoiced =  200   Budget = 300   - Bar chart shows a column of 500 for the month (NOT correct)
    What I want is to show 1 column for each month where up to 200 the colour is green and from 200 to 300 the colour is blue for example....
    How to achieve this ?

    Hi HCMJ,
    By default, the bar value will not overlapping each other in stacked bar chart, and we cannot increase or decrease the gap between the series in Reporting Services.
    Based on my research, I find a workaround can achieve your requirement, please refer to the steps below:
    Create a dataset with the query below (sample data):
    CREATE TABLE #temp(name nvarchar(50),time nvarchar(50),value int)
    INSERT INTO #temp VALUES     ('Invoiced','YEAR',100),('Invoiced','MONTH',200),('Budget','MONTH',300),('Budget','YEAR',600)
    SELECT * FROM  #temp
    Insert time field to Category Groups pane, and change the group name to “time”.
    Insert value field to Values pane, then change the value to like below:
    =min(Fields!value.Value,"time")
    Insert another field with the following expression to Values pane:
    =max(Fields!value.Value,"time")
    Change the type of chart from Stacked Bar Chart to Range Bar Chart.
    Right-click the Series field to change the Fill color to #9bff8c00 (DarkOrange with 155 Transparency) or any color with Transparency you like. Now we can get the following:
    Preview it and get the following result:
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Outlook 2007 "To Do" bar not showing iCloud Calendar events:

    It may be that Apple did not program into the iCloud software that piggybacks to Outlook 2007 the "To Do/Appointments" bar that shows all your iCloud calendar events on the right side of Outlook. It took hours with Apple to get all devices to sync with Outlook but it now syncs, finally.....just can't figure out a way to see the "To Do/Appointment" bar on the screen right side when the calendar is up. Anyone figure out if that feature still functions or if that is disabled when the iCloud piggyback software is installed with Outlook 2007?

    hi!
    i just want share my ideas.
    option a: please check your conduit if it automatically goes to do nothing. if that is the case, check if you have an EAS account on your versamail.
    option b: try creating a new calendar data on outlook then syncronize your phone. if the new  data will transfer, it means that the rest of your calaendar data are corrupted.
    option c:try to check also that if your calendar data on outlook are on the default calendar folder and not on a subfolder.
    please feel free to reply if what happens after you perform them.
    thanks
    Post relates to: Palm TX

Maybe you are looking for