Yamaha CVp-509 Voices

I am trying to import my digital pianos voices to garageband. I can use it as a midi keyboard but I only get garage bands voices it will not import any sounds from my digital piano. It is hooked up with a usb host cable. How do you do this. Thanks in advance. Also would logic 9.0 be able to do this ?

You can't, unless you find some software out there which can access Yamaha's proprietary format for storing sampler instruments and turn it into the kind of file that GB can work with. I doubt that something like this exists.
There is a plugin called MidiO that you can use to send the midi information of a track out to your keyboard. That way, it would play the keyboard's sound. Of course, that's only for playback, a mixdown of the song wouldn't contain these sounds.

Similar Messages

Yamaha CVP-98 & Garageband...HELP!!

OK, Here's the deal...
I'm trying to connect a Yamaha Clavinova CVP-98 through Audiotrak's XP MIDI Mate to my Intel Mac Mini so that I can record in Garageband.
When I connect the MIDI Mate, Garageband recognizes it and says that "A Change in the number of MIDI Inputs" has occurred. That sounded great to me until I tried to press record on a "software track" for a grand piano. Garageband never recorded anything, and I don't know if the piano is really getting through to the computer. I've worked with various settings for about 5 hours to no sucess, and I decided that if everyone here couldn't find a solution, then it probably didn't exist.
Does anyone know what I'm doing wrong?
I've tried plugging the in to the out on the Clavinova and vice versa as some had originally instructed but to no success.
Any help would be appreciated....
Intel Mac Mini Mac OS X (10.4.6)
MacBook Pro Mac OS X (10.4.5)
Intel Mac Mini Mac OS X (10.4.6)

I posted this in the wrong forum..I meant to post in Garageband 08.... sorry guys..

Connecting Garageband to a yamaha clavinova cvp 204

can anyone help.....
i am trying to connect my mac book to my yamaha cvp 204 clavinova so that i can interact with the piano lessons. can anyone help with the easiest way to do this..........

Yamaha has a vast number of keyboards, and some get along with the Mac, some don't. You might try to install this driver:
http://www.global.yamaha.com/download/usb_midi/files/um111mx.zip
... and see if GB recognizes the keyboard when it's connected through USB.

CVP 7.0 codec change

Has anyone tried to changed the codec from G.711 to G.729 or vise versa via the registry entry:
HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems, Inc.\CVP\Customer\Voice Browser\Config\Codec "g711Ulaw64k"
If not, can someone that is running G.729 on CVP send me the g729 key entry?
Best regards and thanks in advance,
Troy

It's not possible to change the codec on CVP VoiceBrowser to G.729
Using VBAdmin on the CVP server, you will see the following:
>>>>SetCodec /?
Type of codec and rate used in the voice browser when communicating with another VOIP endpoint.
Default: g711Ulaw64k
Valid Values: g711Ulaw64k or g711Alaw64k
System shutdown and startup necessary for changes to take effect.
ShowCodec /?
SetCodec g711Ulaw64k
Note: g.729 is not an option. If you try to set the codec to g.729, you will see the following:
>>>>SetCodec g729r8
The new codec value should be either "g711Ulaw64k" or "g711Alaw64k".
Hope this helps.
Hitesh Patel

Program Number in Logic Pro not retaining link to sound in ext midi keybd

I have Logic Pro 8 and a MAcbook connected via a Midi cable with a Yamaha CVP 109 keyboard which has its own really cool sounds.
I can record from the keyboard using the keyboard sounds into Logic Pro, and I can playback the results as long as I am within the same session (i.e. I have not closed down Logoc Pro or OI have not switched off the keyboard.
Problem 1 - If I switch off the keyboard, the Program number visible in the INspector in Logic Pro changes from say 40 to 0 every time. I see it happening in realtime on the screen. So if I subsequently save the Logic pro project, all the instrument program numbers are set to 0.
Problem 2 If instead of switching off the keyboard, I exit Logic Pro and reload the project, the program numbers are correct but they still play as if they are program 0. I have to select another number and go back to the one originally visible to get them to work.
As you can see the problems are related. Why is Logic Pro (after exitting and reopening the project) not connecting to the correct voice on the keyboard even though the program number is correct? Why does turning off the keyboard, reset the Program number for every MIDI track to 0?
Is there a setting that stops this happening?

Problem 1 - If I switch off the keyboard, the Program number visible in the INspector in Logic Pro changes from say 40 to 0 every time.
Hmm, that's very odd. Is the keyboard transmitting program change 0 when you switch it of? (Look at the monitor object in the Click&Ports layer of the environment and see what the keyboard transmits).
If so, you could always filter out received program changes to stop that happening.
Problem 2 If instead of switching off the keyboard, I exit Logic Pro and reload the project, the program numbers are correct but they still play as if they are program 0. I have to select another number and go back to the one originally visible to get them to work.
Just because the value is set to eg program 42 doesn't mean those program changes have been transmitted to the keyboard yet. In Project Settings -> MIDI -> General, make sure "Send used instrument settings" after loading project is checked (and as it's a song setting, you'll need to update your default startup templates so it always does it.)
This setting sends the used program changes when you load a song to set the external keyboards to the correct sounds.

Call Server not coming up

ICM 7.5
CVP 7.0
The call server is not coming up.
here is the log from voice browser.
13:15:08 Initializing Event Management System (EMS) Library.
13:15:08 Trace: EMS Server pipe Customer\Voice Browser\VBEMSPipe enabled for Customer\Voice Browser\VB
13:15:08 Trace: Release 7.0.1, Build 1190
13:15:08 Trace: INFO: Registry base = CVP\Customer\Voice Browser
13:15:08 Trace: INFO: Process Name = VB
13:15:08 Trace: INFO: ICRRoot = C:\Cisco\CVP\bin
13:15:08 Initializing Node Manager Library.
13:15:08 Trace: INFO: Voice Browser Reading Registry...
13:15:08 Trace: Monitor Server pipe Customer\Voice Browser\VBCmdPipe enabled for Customer\Voice Browser\VB
13:15:08 Trace: Monitor Server pipe Customer\Voice Browser\VBReadOnlyCmdPipe enabled for Customer\Voice Browser\VBReadOnly
13:15:08 Trace: INFO: Voice Browser initializing globals...
13:15:08 Trace: INFO: VBRegistry::SetRegNotify Setting Registry trace
13:15:08 Trace: INFO: Voice Browser starting threads...
13:15:10 Trace: INFO: Resolving IP address for ICMGRPCVP1
13:15:12 Trace: INFO: IP address for ICMGRPCVP1 is 10.20.20.60
13:15:12 Trace: INFO: Gatekeeper configured is 10.20.61.92;SIDEA;1719. Registration attempts will start with first GK in this list until a successful registration occurs
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: maxCalls(defined in radvision config as Q931.maxCalls) = 1400
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: maxIVRPorts = 130
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: maxTotalCalls = 555
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: takebackPercentage = 0
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: startingRtpPort = 16384
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: radConfigPath = C:\Cisco\CVP\VoiceBrowser\Config.val
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: pktInterval = 20
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: adminMode = 1
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: RaiMaxThreshold = 90
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: RaiMinThreshold = 80
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: Codec = g711Ulaw64k
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: CpuMaxThreshold = 99
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: CpuMinThreshold = 94
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: CpuHealthCheck = 0
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: CpuSustainedTime = 15
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: CpuOverloadReject = 0
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: PerfmonIntervalTimer = 5000
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: MemMaxThreshold = 80
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: MemMinThreshold = 60
13:15:12 Trace: INFO: Voice Browser Main Thread Active...
13:15:12 Trace: INFO: H.225 Call signalling address of Voice Browser is 10.20.20.60:1720
13:15:12 Trace: INFO: Voice Browser Trace Mask is 0x101083
13:15:12 Trace: INFO: Initial registration with gatekeeper
13:15:12 Voice Browser communication to the Gatekeeper successful, alarm cleared.
13:15:12 Trace: SYSLOG: Server: STATUS=2, Port: =H323,NAME=H.323Ser?+wSTATUS=2
13:15:12 Trace: INFO: H323CallMgr::sendRAI: Successfully sent RAI for resource unavailability
13:15:12 Trace: INFO: LongPoll Failed -- Got OUT_OF_SERVICE from Call Server
13:15:13 Trace: INFO: Starting HEALTH long poller to Call server localhost:8000/cvp/VBServlet
13:15:13 Voice Browser to Call Server localhost:8000 connection unsuccessful.
13:15:13 Voice Browser cannot access any Call Servers and is no longer accepting calls.
13:15:13 Voice Browser ICMGRPCVP1 is out of service.
13:15:13 Trace: INFO: H323CallMgr::sendRAI: Successfully sent RAI for resource unavailability

Dear Geoff;
I am facing the same thing, but in the OAMP is shown to be down and not able to get any statistics on this CVP Call Server.
Actually the PG01, PG02 and PG03 are enabled in the router registry (while PG01 for CUCM PG, PG02 for CVP Call Server PG and PG03 for the Media Routing PG).
It was working before and I was receiving calls on it, but suddenly this happened.
Actually, an upgrade happened from version 7 to version 8 and we imported new licenses for the VXML Server but did not import new licenses for the CVP Call Server. Could be a license issue because we have to import the new license to change from version 7 to version 8?
Thanks in advance for the help.
Regards
Bilal

XI Voice piairing to Yamaha audio system

XI Voice remote is paired to Yamaha audio system (as well as the TV) and controls volume but does not control on/off of the Yamaha. Right now I need to use a different remote to put the system on/off. It appears that the pairing is working - in part - or it wouldn't control the voice on the volume on the audio system. Has anyone experienced anythinh similar?

Start with this thread: http://forums.xfinity.com/t5/X1/XR5-and-XR11-quot-Voice-Remote-quot-Code-Lists/td-p/2550616

My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver.

My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver. This only occurred on the rented video and on recorded shows on my cable DVR. previews and other content on Apple TV are fine. Any ideas??

Previews and trailers do not contain 5.1 audio.
If you have recently moved your setup, you may have inadvertently changed some of the settings on your receiver. It certainly sounds as though it is unable to play the 5.1 audio from the Apple TV.

Getting Yamaha MM^ Voices to work in Garage band.

Goal to Use Yamaha mm6 voices in Garage Band.
I have downloaded the yamaha drivers and I can use the Yamaha to use the garage band voices in recording but I have no clue on how to get the YAmaha voice to record in Garage. I have called Yamaha support and they feel its about finding out how Garage band accepts MSB / LSB / Midi info --- and where to put that in garage band.
any help would be grat
Paul
I have a new Mac Pro Lepoard

http://www.bulletsandbones.com/GB/GBFAQ.html#Audionotmidi

How make wireless connection with airport express to Yamaha Clavinova CVP-403 ?

I would like to wirelessly connect my Yamaha Clavinova CVP-403. I would like to use a D-link DWA 125 and my airport express. Does anyone has any experience on how to do that?

Hi Henry - you seem to be a very helpful and knowledgeable person and I am wanting to dive in to the depths of wireless working at home and could probably do with your advice. I certainly dont have as much knowledge as Jaybee and if hes had problems I am feeling a little apprehensive.
I know that the first thing I need to do is get an ethernet modem to use with Airport Express as I currently only have a USB modem. I was wondering if you have any recommendations or if I should go straight for the Netgear DSL modem/router (DG834B) that Jaybee ended up with. Although the bit about disabling the Airport Express resp. Extreme routers scares me rigid
I have looked at About this Mac and got the following for you hope its helpful.
OSX 10.3.9
1.33 HGz PowerPC G4 processor
Airport Extreme: Worldwide
Firmware: 400.17(3.90.34.0.p11)
Airport admin utility: 4.2 (v420.31)
My ISP is also Tiscali (UK) - they have said they can only provide modem support on the USB modem they provide so once I switch to an ethernet modem Ill be on my own. I have checked the Tiscali website and found the following modems, so I would assume (probably unwisely) that they would be compatible with my account...
Zoom X6 5590 DSL Modem (55907200)
D-Link DSL-300T
Zoom Hayes ADSL Ethernet (H0-15805) (081580572)
Any help is very gratefully received.
Regards,
... LIZ ...

Record the voices built into Yamaha keyboard onto Garageband

I've successfully connected my Yamaha keyboard to record the Software instruments in Garageband.
Conversely, how do I record the voices built into my Yamaha keyboard onto Garageband?
Thanks.

1. Plug the Line-Out of the keyboard into the line-in on your computer
2. Create a New Basic Track
3. Press record.
4. There is no 4

CVP Voice Browser is out of service.

HI,
Please suggest how to recover from the error message:
CVP Voice Browser is out of service.
Gatekeeper is down.
Thanks,
Manish.

Hi Geoff,
i have the same problem as Manich, although the gatekeeper is showing up.
entered the command set Gatekeeper 10.1.1.103:CVP_LAB (where 10.1.1.103 is the ip of the gatekeeper and CVP_LAB the zone name)
the gateway and the gatekeeper are both installed on the same router and the former is registered with the latter.
this is a lab installation, do we need a license for the h323 to go in service?
can you please advise?

CVP Opsconsole: Patterns for RNA timeout on outbound SIP calls - Dialed Number (DN) text box does not take any input

Hi there,
I'm having problems modifying the 'Dialed Number (DN)' text box under 'Advanced Configuration->Patterns for RNA timeout on outbound SIP calls' of the SIP tab in the Cisco Unified Customer Voice Portal 8.5(1) opsconsole. In a nut shell, I need to change the RNA timeout but some reason when typing into the Dialed Number text box, the input is not taken. The reason I want to change this settings is because my ICM Rona is not working with CVP:
https://supportforums.cisco.com/thread/2031366
Thanks in advance for any help.
Carlos A Trivino
[email protected]

Hello Dale,
CVP doesn't allow you to exceed the RNA more than 60 Seconds. If you want to configure the timer for DN Patterns you should do it via OPS console, It would update the sip.properties files in correct way, the above way is incorrect.
Regards,
Senthil

RONA How To? with CVP 7.0 and ICME 7.5

I need some help determining how to do RONA when running CVP 7.0.
We are running ICME 7.5 and CVP 7.0
We use SIP from the ingress gateway to the CVP
call server when the call comes in.
The ICME 7.5 install and config states that for the Agent Desktop Settings:
Ring No Answer Number: Enter the ICM DN associated with the ICM routing script that youwant to use to reroute a call that an agent has not answered. If you are deploying Unified CVP,leave this field blank.
We always had a Dialed Number in the RNA so call swould get rerouted to our RNA ICM script and routed to the intended skill group.
The guide also talks about a "No Answer Timeout for Router Requery" setting in CVP, how? where? in 7.0?
I also found a reference to that setting in the cisco wiki (link below) excerpt below:
Check the RONA timers and reconfigure times. There are three system timers that affect RONA behavior:
Unified CVP - In VBAdmin, use SetRNATimeout to specify the number of seconds that the agent phone should ring before the call is taken away from the agent. This timeout must be longer than the Ring no Answer timeout set in the Agent Desktop settings. Use ShowRNATimeout to display the current timeout value. You must restart the Voice Browser for a setting change to take effect.
Agent Desktop settings - set from ICM Configuration->Enterprise->Agent DeskSettings->Ring no Answer Time. Ring no Answer Dialed Number must not be set. Set the timeout to the maximum time for the agent to answer a call, for example 2 rings = 8 seconds. This timer value should be set to a shorter time than the CVP RNATimeout.
http://docwiki.cisco.com/wiki/Transfer_and_Connect:_RONA_and_Router_Requery_Not_Working_as_Expected
Is the CVP Voice Browser Configuration Utility still used.
any help is appreciated, thanks

Found the answer in this thread:
https://supportforums.cisco.com/thread/2031366

Possible to play audio while fetching data in CVP Call Studio?

Hi, CVP 8.5. We have an action element that fetches account data from a backend. The customer would like to play some audio while this operation is going on, to better indicate to the caller that things are working as they should. Is this possible to do?

Yes, you need to add a "fetchaudio" property to a voice element placed immediately before your long running action. Details here: http://developer.cisco.com/web/cvp/forums/-/message_boards/view_message/2641915

Yamaha CVp-509 Voices

Similar Messages

Maybe you are looking for