YEAR VIEW with Lens (Zoom EFFECT)

Hi All,
does anyone know how to get a year view on iCal. It would be so nice to see the whole year on one page.
moreover would it be great to zoom with a lens (like in aperture) in a event.
Sincerly
Robert

there is unfortunately no year view available in ical at the moment.
may i suggest you send your suggestions to apple: http://www.apple.com/feedback/ical.html

Similar Messages

Problem with the zoom effect

I have five images in a row and I have added a zoom effect to
the rollover and rollout effects. What I have noticed is that the
image only zooms out when I bring the mouse out from the bottom of
the image. If I try to bring the mouse from left to right across
the images the first image zooms in but not out, and this happens
for all five images. Can anyone identify what I am doing wrong?
Here is my code:
<mx:HBox width="100%" horizontalAlign="center">
<mx:Image source="@Embed('images/bistro9-1.jpg')"
scaleX=".05" scaleY=".05" rollOver="doZoom(event)"
rollOut="doZoom(event)"
click="showImage('images/bistro9-1.jpg')"/>
<mx:Image source="@Embed('images/bistro9-2.jpg')"
scaleX=".05" scaleY=".05" rollOver="doZoom(event)"
rollOut="doZoom(event)"
click="showImage('images/bistro9-2.jpg')"/>
<mx:Image source="@Embed('images/bistro9-3.jpg')"
scaleX=".05" scaleY=".05" rollOver="doZoom(event)"
rollOut="doZoom(event)"
click="showImage('images/bistro9-3.jpg')"/>
<mx:Image source="@Embed('images/bistro9-4.jpg')"
scaleX=".05" scaleY=".05" rollOver="doZoom(event)"
rollOut="doZoom(event)"
click="showImage('images/bistro9-4.jpg')"/>
<mx:Image source="@Embed('images/bistro9-5.jpg')"
scaleX=".05" scaleY=".05" rollOver="doZoom(event)"
rollOut="doZoom(event)"
click="showImage('images/bistro9-5.jpg')"/>
</mx:HBox>
<mx:Zoom id="zoomAll" zoomWidthTo="0.06"
zoomHeightTo="0.06" zoomWidthFrom=".05" zoomHeightFrom=".05" />
public function doZoom(event:MouseEvent):void {
if (zoomAll.isPlaying) {
zoomAll.reverse();
else {
// If this is a ROLL_OUT event, play the effect backwards.
// If this is a ROLL_OVER event, play the effect forwards.
zoomAll.play([event.target], event.type ==
MouseEvent.ROLL_OUT ? true : false);

I figured out the problem I was having with my zoom effect.
It worked when I added a specific number for height and width.
Before I had a percent. Try adding a height and width number, it
worked for me.

How do you batch edit still photos with panning/zooming effect in FCP X?

Hi,
I was making a slideshow with a lot of photos. I had to manually add two keyframes in each photo (one in the beginning and one at the end), and then manually adjusted the scale/position for each photo so they pan/zoom during the slideshow.
Is it possible to accomplish the samething with multiple photos in a batch? It would sure save a lot of time. Thanks.
Regards,
Nelson

Build the effect that you want on one photo.
Right click that photo on the Timeline and choose Copy.
Select the other photos that you want to have the same effect.
Right click one of them and choose Paste Attributes.
In the Attributes dialog, place a check mark next to those you want. In the case of the effect described in your post, that would be Motion Attributes. If you had also included Filter effects such as color correction, you would check those too.

Cannot see zoom effect

After setting up a zoom on a still image it looks fine when using "play output" in the pan/zoom tool preview window but when I return to the timeline view and play that clip it doesn't display properly. Instead it shows the initial frame with something looking like the zoom effect going on behind it.
Can I not view the actual zoom effect for a clip after setting it up and returning to the timeline view? I will be grateful for any insight.
Still image is a .psd 1613 x 1080 in a project that is HD 1080i 1920 x 1080 (so the still image has black bars at both sides--which is the way I want it)
OS: Windows 7 Ultimate x64

Thank you to all three of you (Steve, Vipul, Bill) who took the time to answer and make suggestions.
I have uploaded two videos showing : 1) view in effect preview window and 2) view in timeline.
However, I think I may have done something wrong to begin with because when I created a new project and used the same source psd file to do the same kind of zoom effect it displayed perfectly both in the effect preview window and in the timeline.
Accordingly, because I can do what I want to do--get the proper zoom effect--I'm not going mess around with that original clip anymore.
What I did wrong with the original clip, I don't know, but I think that perhaps I was trying to make the orginal clip too short and that messed up the program. The new project clip with zoom that I created was a few seconds long.

Calendar stuck in year view

On my iphone 4 using ios7.02 the calendar is stuck in year view. There are no tabs. I can't escape. I tried quitting and restoring the phone, that did not work. How do I get back to the classic month view with the tabs?

At the top of the calendar there is supposed to be a set of tabs for view: day, list, month, year. On my phone, it is stuck in a year view with no tabs at the top.
In IOS7 the interface has changed, the year view do not have any tabs on top except Search (lupe icon) and a plus sign ( + ) on the right. If you hold the iPhone in Landscape mode (horizontally) you get a week's view.

Problem with the Blind effect.

Hi, i have a problem with the Blind effect.
I added multiple Image bars vertically together. With a click on a bar, some text slides out. With another click on the bar you can slide the text back in. So far so good.
Now, always when i click to open or close a window, the site jumps to a certain point, but i can't exactly figure out where it's jumping to.
Is there an order to fix the position of the bars, so that they don't move, even if I open or close the bars?
The problem does not appear when im at the bottom of the website.
thx for your help.

I figured out the problem I was having with my zoom effect.
It worked when I added a specific number for height and width.
Before I had a percent. Try adding a height and width number, it
worked for me.

IOS 8 - Photos app bug - "stuttering" effect on Year view

Hi Folks,
On the iPhone6 Plus 128GB with iOS8.1.3 (with 15000 photos inside several years go), I notice that when using the Photos native app in the “Year view” (yearly mosaic view), if I scroll up or down slightly fast, the scrolling that you get has a little “stuttering” or “jerking” effect, so the UI is not perfectly smooth in this view inside Photos native app.
Have you noticed it in your own iPhone's with iOS8.1.3. and also having a huge size photo callery as I have (>10000 photos spread in several years)? (I think that is it very important, because if you have not a huge photo gallery, probably you will not see the “stuttering” or “jerking” effect that I am describing).
I think this is a bug which impacts iOS User eXperience, which needs to be fixed.
Thanks by your feedback!

Hi Guys!
Any experience to share with us, please?
Thanks!

Neither mouseover/hover nor click on Photos/Year view shows image preview zoom. Am I missing something?

I have seen video reviews of a cursor hover working, and Apple's Photos website says to click on a thumbnail to show a zoomed preview. Neither method is working to show previews of a tiny Year view photo. If I click, the entire view enlarges, not just the individual photo.
I apparently converted my library to Photos from iPhoto on the last update. Not a lot of warning there. I have chosen to save images on my iMac, and to share across devices in iCloud. I have paid my fee to get the proper amount of storage in iCloud. I have begun the process of uploading my 30,000+ photo library to iCloud. It is chugging all my network resources, so have occasionally paused that process. ~25,000 to go.
The only Photos/Preferences/General setting I believe I have changed is to uncheck "summarize photos" to see all the photos in a given year.
I am using the Apple trackpad.
Do I need to wait for something magical to happen or is there a setting or something else I need to do to see zoom previews by moving cursor over them?

Clicking and holding down on a tiny thumbnail for a moment will show a small preview, but once I release the holding down, the view changes to Moments, and no direct way back.
That is not a very efficient workflow. I am seeing this with "Summarise" disabled.

Are Cube organized materialized view with Year to Date calculated measure eligible for Query Rewrite

Hi,
Will appreciate if someone can help me with a question regarding Cube organized MV (OLAP).
Does cube organized materialized view with calculated measures based on time series Year to date, inception to date eg.
SUM(FCT_POSITION.BASE_REALIZED_PNL) OVER (HIERARCHY DIM_CALENDAR.CALENDAR BETWEEN UNBOUNDED PRECEDING AND CURRENT MEMBER WITHIN ANCESTOR AT DIMENSION LEVEL DIM_CALENDAR."YEAR")
are eligible for query rewrites or these are considered advanced for query rewrite purposes.
I was hoping to find an example with YTD window function on physical fact dim tables with optimizer rewriting it to Cube Org. MV but not much success.
Thanks in advance

I dont think this is possible.
(My own reasoning)
Part of the reason query rewrite works for base measures only (not calc measures in olap like ytd would be) is due to the fact that the data is staged in olap but its lineage is understandable via the olap cube mappings. That dependency/source identification is lost when we build calculated measures in olap and i think its almost impossible for optimizer to understand the finer points relating to an olap calculation defined via olap calculation (olap dml or olap expression) and also match it with the equivalent calculation using relational sql expression. The difficulty may be because both the olap ytd as well as relational ytd defined via sum() over (partition by ... order by ...) have many non-standard variations of the same calculation/definition. E.g: You can choose to use or choose not to use the option relating to IGNORE NULLs within the sql analytic function. OLAP defn may use NASKIP or NASKIP2.
I tried to search for query rewrite solutions for Inventory stock based calculations (aggregation along time=last value along time) and see if olap cube with cube aggregation option set to "Last non-na hierarchical value" works as an alternative to relational calculation. My experience has been that its not possible. You can do it relationally or you can do it via olap but your application needs to be aware of each and make the appropriate backend sql/call. In such cases, you cannot make olap (aw/cubes/dimensions) appear magically behind the scenes to fulfill the query execution while appearing to work relationally.
HTH
Shankar

Year view not showing location summary

I have a problem with the new photos app on iPhone6 and Yosemite 10.10.3.
In the "year view" places where the photos were taken can usually be accessed in a map (e.g. "United States, Germany and 3 more >").
I have several years of photos and this does work for most of them, but for 2 years (2013 and 2014) there is no location or countries displayed I could tap on to open the map view so I can see what places I visited in those years.
When I zoom in to collections or moments however, every single photo does have location data.
The photos app seems to fail summarizing my places. The problem is the exact same on iPhone and on the new photos app in Yosemite (turning on or off iCloud photo library doesn't make a difference here).
Also tried the following: I deleted all photos from my iPhone and sync them again via iTunes. When I did this while having the photos app open in the year view, I could see that the years 2013 and 2014 at first have this link to the map but as more photos are synced both disappear.
Any ideas on this? Please help

In the Collections or Years mode in the Photos app and click on the title or date range just above the thumbnails to get to the map with those photos. A map with all of your photos is not available at this time. Don't know if it will be. Send a feature requires to Apple via http://www.apple.com/feedback/icloud.html to tell them what features you'd like to see incorporated into the Photos app that is actively under development.

Problem with premiere pro effects controls

Hi, Merry Christmas;
I have a problem using keys with the opacity effect in the effects control panel; the following pictures should I think make my problem clearer to understand:
The image above shows that the opacity control of the correction gopro clip is at 100% which unless I've drunk too much champagne, is in full view on the screen!
I want to make a transition effect showing the raft appearing in the window of the following picture which is an Indian Granary above the Colorado river.
On my clip of the Granary I zoomed up to the window as to give the impression I get into the granary itself; When I arrive at this moment I begin, with key frames to have
the granary interior pass from 100% opacity to 0% at the end of the granary clip. Unless again champagne is very bad for my health and vision, I should see then the river
and the raft! Well I don't and that gives me nightmares! What is wrong? I add that to have a smooth and regular zoom I have used time remapping on the granary clip.
The granary clip is the one just above the correction gopro clip and overlapping it by the duration of the dissolve shown selected in the picture below(I could of course use a dissolve here, but I want to economize on a supplementary effect)
below is the view with the screen and the opacity of the granary clip at 25%. Normally the clip of the raft should be quite visible then! the red-orange on the right of the screen is the interior wall of the granary!
Thanks for any suggestions... Claude

Stacking in Adobe products is prototypically the top being the final thing you "see". If you have two clips, one atop the other, you will normally see the top clip & nothing from the bottom clip ... unless the top-most clip is given some transparency by say bringing its opacity setting down.
Think of it as the bottom layer "feeds" up to the next higher layer and so on. What comes out at the top is what you will see as the final product.
Much of my work has been short interviews cut with b-roll & stills. The basic interview sits on V1, and I use V2 and only occasionally V3 for the b-roll & stills that I'll cut to for variety, information, or simply interest retention during the running of essentially the audio from V1. This works nice, as I can expand or trim the b-stuff as it seems right while playing back. Then if I want to put in a transition, as part of polishing, I can either trim out the V1 section and move the V2 clip "down" before adding transitions or do a razor on V1 on both ends and add it to the end of the clips. Typically I cut out the section.
The lesson is ... putting anything on a higher track replaces the viewable video of anything under it. Unless you reduce the upper tracks opacity.
Neil

Replace Materialized View with Flashback?

I'm building a Data Warehouse with the following:
1. Tables populated throughout the day using CDC from the Application DB
2. MVs on those tables to keep a daily snapshot of the tables for reporting.
3. End users access the data through views with VPD applied, on the MVs
My systems team would like the solution to use as little storage as possible and currently I effectively have a copy of the app DB in the DW tables and would need another copy in the Daily MVs. (It is an insurance DB, so it is complex with lots of data, > 1.5 TB)
One way to reduce the storage could be to use flashback to keep a static daily version of the tables, so
At midnight I'd recreate the views like:
CREATE OR REPLACE VIEW client
AS SELECT *
FROM client_tab
AS OF TIMESTAMP (TO_TIMESTAMP(TRUNC(SYSDATE)));This would replace my refresh MV script. The end users would then refer to the client view in their reports
We would obviously need enough undo to store a days worth of data to ensure the flashback views remain consistent, but this is much less than the space required for a full copy. On a busy day there would be about 1% data change.
No DDL will occur on the tables during the day
Is there anything else I should be aware of? Can you let me know if (and why) this would not be a good idea?
This will run on Oracle 11.2.0.1
Thanks,
Ben

I guess I'm having some trouble visualizing the basic data model...
In most data warehouses that I've seen in the financial industry, reporting the position/ balance/ etc. at a given date involves scanning a single daily partition of each fact table involved and then hitting dimension tables that may or may not be partitioned (slowly changing dimensions would often have effective and expiration date columns to store the range of time a row was valid for, for example). Year-over-year reporting, then, just has to scan two fact table partitions-- the one for today and the one for a year ago. You may not store every intermediate change if there are potentially hundreds of transactions per account per day, but you'd generally put the end state for a given day in a single partition.
In one of your updates, it sounded like the 1.5 TB of data was just for the data that constituted end-of-day yesterday plus the 1% of changes made today which would imply that there was at least 15 GB of UNDO generated every day that would need to be applied to make flashback query work. That quantity of UNDO would make me pretty concerned from a performance perspective.
I would also tend to wager that VPD policies applied to views that are doing flashback query would be problematic. I haven't tried it and haven't really worked through all the testing scenarios in my mind, but I would be somewhat surprised if that didn't introduce some sort of hurdle that you'd have to work through/ work around.
Justin

Camera with no zoom.....

Ok so i bought the iphone 3gs and i was wondering why hasn't apple added a zoom feature i mean this is the new iphone and it has a video camera and all this new stuff but no zoom i mean i've seen phones years old that have a zoom feature i know the camera isn't that good but it still has zoom. I love the new iphone but my only problem is with the camera i don't want to be all up in someone's face and take the picture thats not right i should be able to do this at a distance i'm not saying u should make a brand new iphone just to add this but make have a free app that makes the pictures look good and that we can zoom

You don't expect digital zoom to have good picture quality. iPhone 3GS does not have optical zoom like some Japanese cell phone released back in 2004. There aren't many cell phones with optical zoom either. Optical zoom provides the best zooming capability. iPhone 3GS however, does have auto focus and that's the most important thing when you need to take picture of documents or close up macro images.
If you want 3x or more optical zoom, I think you have to look somewhere else or just search online to purchase some external camera lens designed specially for iPhone.
Something like that I think that's what you really want huh??
http://www.stylehive.com/bookmark/iPhone-Camera-Lens--6x-Optical-Zoom-396635
Message was edited by: squarejp

DB view with flexible number of columns?

In my Oracle 10 I have these tables
Customer table:
id      customer
1       John
2       Bob
Item table
id      item_name
1       itemA
2       itemB
3       itemC
4       itemD
Purchase table:
id      item_id date    customer_id
1       3       070202 2
2       6       070203 5
...I'd like to create a view like this:
        itemA   itemB   itemC   itemD   ...
John    3       4       0       0       ...
Bob     0       3       0       0       ...
...The view showed John purchased itemA 3 times, item B 4 times. Bob purchased itemB 3 times. This assume each customer only by one item at a time, which is a reasonable simplification of my situation.
Such a view (with variable number of columns) is needed not in our web application but also provide an understandable data source for non IT professional to use report software. If my approach of solving this problem is completely wrong, I'd also like to know what's the common practice. Thank you very much in advance!
Message was edited by:
user609663

I have tried to ask the question in a way that greatly simplify current problem to make it easy for others to understand without having to explain a lot of background information and 'the situation'; it seems I over-simplified the issue to make it even not worth solving or a wrong question being asked. So here I explain the complete problem and look for advice again (be prepared, pretty long description following:). I am a purchased customer of Oracle 10 DB and I reasonably expect being considered as Oracle user looking for help rather than students trying to play smart with assigned data normalization course exercises.
We are working on a system that collects data from interview results. The questionnaires for the interviews are formatted with a coded question, followed by user's answer to the question, like the following:
     Question Code   Question content   Answer
     H001            ...                123
     H002            ...                45
     H003            ...                33
     H004            ...                66
     H005            ...                4,66
     ...             ...                ...The users answer question with a digit, for some special questions, e.g. H005, they are allowed to answer with a set of digits. There are thousands of interviews each year, the simplest solution to collect the interview answers is to use such a db table:
simple_db_table:
id   H001 H002 H003 H004 H005 H006 H007
1    123   45    33    66    4     82    9
...This solution have two problems:
1. It doesn't properly store answers to questions that requre a set of digits, like H005.
2. The number of questions and their codes change from one survey to another, but the table have fixed number of columns and column names.
And two benefit:
1. With such simple table, people who use report software that directly access oracle db can creat their reports on easy-to-understand data presentation;
2. calculation based on questionnaire data is simple, e.g. get the average of H007/H009 for questionnaires that have H002 > H003 * 600 would be:
SELECT SUM(H007) / SUM(H009) FROM simple_db_table WHERE H002 > H003 * 600;Next solution we have normalized tables:
questionnaire_entry_table:
id                 NUMBER
questionnaire_name CHARquestionnaire_definition_table:
id                 NUMBER
questionnaire_id   NUMBER
question_code      CHAR
question_content   VARHCARinterview_table:
id                 NUMBER
questionnaire_id   NUMBER
date               DATEquestionnaire data table: itv_data
id                 NUMBER
interview_id       NUMBER
question_code      CHAR
answer             NUMBERWith the new structure, it just turn the problems of simple_db_table to its benefit and simple_db_table's benefit become the problem:
1. Personnel who use report creation software feel too confused to make report based on such tables, because they do not understand the normalized modeling. In our case, effective training is difficult because there will be many geographically distributed people make reports based on this structure and they have lower IT knowledge than database administrators. These personnel can make reports based on simple_db_table.
2. calculation based on questionnaire data is very difficult.
To explain 2, let's take the same example, we still wish to get the average of H007/H009 for questionnaires that have H002 > H003 * 600, my method is:
setp 1: create a view with by using:
       CREATE VIEW v (id, H002, H003) AS
       SELECT a.itv_id, a.H002, b.H003
         FROM itv_data a, itv_data b
       WHERE a.interviewee_id=b.interviewee_id
         AND a.question_code='H002' AND b.question_code='H003';step 2: create a stored procedure to get the calculation result:
       CREATE OR REPLACE PROCEDURE get_result (result OUT NUMBER) IS
         sh007 NUMBER := 0;
         sh009 NUMBER := 0;
       BEGIN
         SELECT SUM(H007) INTO sh007 FROM itv_data
           WHERE itv_id in (SELECT id FROM v WHERE H002 > H003 * 683);
         SELECT SUM(H009) INTO sh009 FROM itv_data
           WHERE itv_id in (SELECT id FROM v WHERE H002 > H003 * 683);
         idc := sh007/sh009;
       END get_idc;As you can see the calculation become much more complex and might involve overhead.
There might be better way to calculate the result that I don't know yet. We have some 100 different formulas to calculate different results, so it's important to get them right and efficiently.
The best solution seems to me is that to create such a view from itv_data and other tables so that to reflect the same structure of simple_db_table. So here comes the question I originally asked how is it possible to create a view with flexible number of columns. I made the very simple example in my original posted message wishing to get an idea of this is possible or the way to go.
I may be taking a completely wrong approach to attack the problem, e.g. perhaps there is a simpler way to get_result from itv_table and for report creation users I should use a metadata layer on top of the normalized table structure (e.g. by using Metadata Query Language from Pentaho BI). But anyway I'd like to get some insightful ideas from the forum. Again thanks for help in advance.

Lens flare effect (format Movie Quick Time) doesnt work in Adobe Premiere CS6

Hi Adobe,
My video effect lens flare (fornat QUICK TIME MOVIE) for transition video doesnt works. Only the audio show up in my Adobe Premiere CS6.
Please I need help from you.
Thank you so much ...
-SieraG-

Hi Jim Simon,
Thank you for your advice. Yes, this is my first time asking the question in this forum. New member..
I co-edit video in Adobe Premiere CS 6 with footage H-264.
Video camera Sony NEX VG10, format MTS, AVCHD. I ' m working on laptop TOSHIBA QOSMIO X775 ( intel -core i5 ) with the system, Windows 7 - NVIDIA GeForce GTX 560M GPU with Optimus.
Buying effect lens flares ( Quick Time Movie item type) , from EBAY, I have been on for many videos of me.
And on yesterday when was imported lens flares effect of myvideo in ADOBE PREMIERE CS6, its failed. Only audio can be imported.
Theres no effect. I try many times but still fail. None at all texts error. But if I click on the flares in MY VIDEO, its working, no problem at all...!
Only fail in Adobe. This was happened last year, I ve forgot how I fix it. (Installed Quick Time Movie software ?)
I ve installed Quick Time Movie yesterday , but there is absolutely no reaction.
Thank you Jim Simon..
I really appreciate ...
-SieraG-

YEAR VIEW with Lens (Zoom EFFECT)

Similar Messages

Maybe you are looking for