Yellow broadband light then no internet

Hi there. Can someone please help me. For the last couple of weeks the yellow broadband light will come on on my home hub, then on my laptop it will disconnect me off the internet with the computer screen saying the yellow light is on unable to connect. It seems to happen the same time on the evening whenever we are on the computer and if this doesnt happen it seems that the internet will run slow for a short period of time then the speeds will return to normal.
When the yellow light sign comes up on our computer screen we have to close the page then open the internet again and then it seems to be working again.
I read somewhere about the 10 training period what is this? When did it start? How long does it go on for? and come this be what the problem is?
I am on the old home hub been with bt broadband a year and a half, it comes off the asdl. I am not able to have bt infinity yet. Can somebody please help its driving us crazy. I reset everything, checked connections and its still the same.

10 training period starts from when you are activated with BT and runs for 10 days, If you could post your hubs stats and BT speed test results, we might be able to offer help. However if you are in this 10 days, its very unlikely BT will want to know until this period has passed!
To
post the full stats from your router
For homehub - 192.168.1.254
Navigate to ADSL Settings or use the A-Z at the top right
Click on More Details and then post the results.
Run Bt speed tester and post the results from http://speedtester.bt.com/
Mortgage Advisor 2000-2008
Green Energy Advisor 2008-2010
Charity Health Care Provider Advisor 2010-
I'm alright Jack....

Similar Messages

Hi Team, Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will st

Hi Team,
Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
Regards
Sahil bhateja

Hi，
So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers.
if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
Yolanda Zhu
TechNet Community Support

HT4907 i am trying to set up an airdisk that is connected to my parents airport extreme, though next to my iCloud account details i get a yellow status light and can't get a hold on the airdisk being connected to an other internet connection..what should

i am trying to set up an airdisk that is connected to my parents airport extreme,
though next to my iCloud account details i get a yellow status light and can't get a hold on to the airdisk when i'm being connected to a different internet connection..what should i do?
sharing is enabled and i entered the right account details.
the disk shows up connected to my parents network, but i want to access it from my place as well

Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

Self install Uverse Internet red blinking broadband light

I've been trying to setup my new Uverse internet service since my activation date (7/21 after 2pm) and the broadband light will not go solid green. I've tried all of the troubleshooting steps I could find and still nothing.

Hi ,
I am sorry about the issues you are having installing your service, but I will be glad to help. Try testing on the other phone jacks in your house. It can take a few minutes for it to sync up, but it should take less than 1 minute for it to start blinking green. I will also send you a private message to look into this issue further.
-ATTU-verseCare

Blackberry Does not Function, Plugged into USB red light then 3 yellow lights and off

Blackberry Does not Function, Plugged into USB red light then 3 yellow lights and off, I cannot even claim the warrently without buying 50$ support?
I am an Electrical Engineer by trade and have 15+ years working with computers. I left it to charge over the last 3 days. Doesn't do anything. It's a $300 paper weight. My mother bought this product for me because she thought it was a great present but now it turns out to being worthless.
What kind of company are you? Honestly?
How the hell do you think your gonna get customer loyalty with this kind of customer service. It's clearly obvious why apple is destroying you. You are worthless competition. I want this blackberry fixed. I will NOT pay for support just to replace my blackberry. That is crooked business honestly. You should be ashamed of yourselves.
My mom bought this for my birthday 4 months ago. I open it up and it doesn't even work. How can you do this to your customers. It's no wonder your company is going out of business.
I demand you fix my issue. I have 1 year of warranty support. I will NOT pay extra just to get my Blackberry exchanged.
Wait until I inform all my news groups in my area of this. I am from ONTARIO, BRAMPTON. I am a CANADIAN, just like your company. CP24 WILL HEAR ABOUT THIS. I WILL RUIN YOUR REPUTATION. I PROMISE YOU THAT.
Solved!
Go to Solution.

No sarcasm here either.
One of my PlayBooks recently went 'possum on me, too. Very frustrated, tried all the known tricks and tips to charge and revive it. Over a year old. I called the support line knowing it was out of date and they would deny me.
Nope, the lady very pleasantly accepted my request, I spoke with customer support and they bugged me via email daily until we got it resolved -- to MY satisfaction. My first interaction with PlayBook support, and it could not have gone more nicely nor further beyond my expectation.
I don't know what you experienced with PlayBook support, you didn't say why you're so mad with them. This is a user-to-user community support forum. We are not RIM employees, but volunteers who enjoy assisting other users. RIM personnel rarely comment on queries posted here. You would have noticed this in the EULA and message upon registration.
Sooo... good luck, and just for the record... the LED activity you described IS very fixable. Sorry you don't have the choice to explore those remedies any longer.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Home hub 3 broadband light flashing orange & purpl...

Hi,
Broadband has stopped working with a flashing orange & purple broadband light (7 days and counting)
Have phoned bt but they failed to resolve the issue over phone - resetting, power off/on etc. Tried 4 different branded adsl filters, alternative router but still no connection. Only 1 main socket, no extensions connected, doesn't have a test facility(older style socket). Tried 17070 quiet line test - sounds clear. Phone line test reports zero faults.
Details from home hub 3 Broadband > connection tab
Line state: Connected
Data Transmitted/Received (GB): 0.0 / 0.0
Downstream: 7.938 Mbps
Upstream: 448 Kbps
ADSL Settings VPI/VCI: 0/38
Type: PPPoA Modulation: G.992.1 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 16.7 dB / 26.0 dB
Line attenuation (Down/Up): 10.8 dB / 5.0 dB
Output power (Down/Up): 17.9 dBm / 12.4 dBm
FEC Events (Down/Up): 10905 / 0
CRC Events (Down/Up): 11 / 0
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 31 / 0
Error Seconds (Local/Remote): 121 / 3
Broadband > Internet tab
Connection time: Connecting
I suspect the issue is at the exchange, has bt disconnected me and plugged someone else in? Any thoughts welcome.

you appear to have tried everything suggested by BT for purple/orange flashing constantly and not solved the problem. the help pages then say if that has failed then contact technical support but I would contact the forum mods instead for help
contact mods
can take up to 3 working days for mods to contact you
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Constant Red Broadband Light

I have a problem with my broadband.
On the 15th October I rang BT and requested my connection to be
transferred to my new property on the 28th October. I then received an
email stating that connection would be made on the 5th November.
I then rang BT again stating that this date was incorrect and the
changeover date should be the 28th October and immediately received an
email confirming this new date.
On the 28th I moved into the new property and the broadband was
working fine. The 5th of November arrived and the broadband stopped
working (going from a blue power light, a blue broadband light and a
blue wireless light to blue power, red broadband & blue wireless).
Since the 5th I have had 3 engineers come to my property, all of
which have found no faults at the property (including the router) and
almost daily calls from India but I still have no connection.
I would appreciate your help immensely! Any thoughts?
Solved!
Go to Solution.

Hi TerryTeo,
Thanks for the post and welcome to the forum.
A red broadband light usually indicates a problem with authentication. Can I get you to check what details you are using within the hub manager?
Open a web-browser and type http://api.home or http://192.168.1.254 in the address bar and then click Go, or press Enter.
Click Settings
Enter Hub password and click OK
Click Advanced Settings
Click Broadband
Click Internet
Under the 'broadband username' section make sure that the username you are using is [email protected]
Please check this and then get back to us to let us know where we stand with this.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Broadband Lights Shows Working, Wifi Light Shows W...

Hi,
We have been having problems with our internet connection for 6 months. Wasted several hours on the phone to BT's India Call centre doing various lengthy tests, checks, uninstalls and reinstalls and I wonder if anyone can help please.
Problem:
The broadband light 95% of the time shows as working as does the WIFI even when the actual service to the computers themselves stops. The wifi just doesn't work now and gradually got worse over the last 6 months (and it's not a particular PC as we have confirmed this on 3 different computers and have the same issue). Sometimes the wifi connection pops up as connected and that lasts all of about a minute before it drops again. When it does pop pop up it shows as local only/limited access - something like that. The network just doesn't get recognised even though it has been setup as our network.
Even when the ethernet cable is connected to any of the 3 computers, the service is intermittent (and we have also changed routers recently and the issues happens with both routers) and during this time the broadband light 95% of the time shows as working. When it stops connecting you get the cannot connect to server on the web page, I check the light and it shows as blue, I cannot even get onto the BT Home Hub website at that point.
Btw the phone line has worked throughout this mess.
I would be very grateful if anyone out there can help.
Best wishes,
Reena.

Hi Renee,
Thanks for the post and welcome to the forum.
I think for the wireless issue you are experiencing I would suggest changing the wireless channel on your router. Here are two links that will give you a bit more info,
My wireless connection keeps dropping
How do I change the wireless channel on my BT Home Hub?
If your connection is dropping while plugged in via ethernet then that is a bit more tricky. Take a look at this link and follow the advise here,
My broadband connection keeps dropping
If this problem continue after following the above advise then we may need to check the network side of things. Please let us know if this has helped at all?
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

AX working fine, but with yellow flashing light

Hello,
I use my AX to stream iTunes. It works great. But it has the annoying yellow flashing light - EVEN THOUGH the airport utility displays the AX as "green" and working just fine. What can I do to stop this?
I have the AX (6.3) participating in a WDS network with WPA2. I have a Linksys WRT54G with DD-WRT firmware. Both are on channel 1. I used this guide to set up the router and AX from default settings: http://www.dd-wrt.com/wiki/index.php/WDS#AppleAirportExpress. I have followed this guide on a previous occasion with total success. This time - Mr Yellow Flashy.
Help me please!
Ste

Do you only use the AX to stream music?
If you do not use it to connect to the internet then the flashing amber light is correct.
The flashing amber indicates that there is no internet connection present on the ethernet port.
You can turn off the indicator totally by changing a setting in the Airport Base Station software on your computer.

Yellow screen light

my iphone 4s has a yellow screen light,.why like that? while my friend who own 4s also has a white screen, better than mine..

INteresting. i just got an ipad2 2 days ago. (amazing hubby surprised me!) and i guess i'd have to hold it up to another ipad to see if it's yellowish at all.
where was light leaking from....the sides? (trying to picture it)
as far as if it would bug me.......i'm like you and if i notice something that bugs me....then every time i used my ipad, i'd be noticing it. i'd rather not have light leakage, i'd likely just get used to the warmer tones on screen. it's probably better for your eyes anyway. they are probably doing it because it's hard to read on compared to a Kindle. that's my 2 cents.

No broadband light on hub, nearly 3 weeks...

I have arrived at this forum as it seems to be the only place BT problems are resolved and I'm at the end of my patience. My broadband activation date was 16th April 2013 and as yet the broadband light has remained off. I've wasted time and money trying to get through to the correct department, been cut off without explanation and been promised call-backs that haven't happened. After finally getting through all the technical checks the latest prognosis is that there is a local area connection fault and the earliest an engineer can come and look at it is 17th May. A full month later.
I find all this a bit bewildering since BT broadband on the very same phone line was working perfectly only about a month ago (I have taken over the phone line from a previous tenant).
I have easily spent £50 on phone top-ups and dongle bills trying to get this sorted and to top everything off, BT has had the cheek to bill me for my first month of non-existent service.
Any help from anyone would be very welcome.
Karen

Hi
I am sorry to see you are having problems
I suggest you contact the forum mods they should be able to get this problem sorted for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
They are a UK based BT specialist team who have a good record at getting problems solved
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

How to delete request in yellow traffic light?

Hi experts:
I created one infopackage yesterday to load the vendor text from our DEV source system. Its update mode is "Initialize Delta Process". When I right click on the infopackage and select manage, I see this request is still in yellow and 'Request has a yellow traffic light in the monitor - Cannot be deleted.' And when I go to Data selection I got the information: "Init. select. for field name currently running in request ***".
Does anybody know how to delete the request still in running or in yellow traffic?
Another thing is when I double click on the infopackage a warning message will pop up with: " Assign a language field to IOBJ 0LANGU; danger of short dump". Do I need to take care of this warning?
Thanks to everyone for your time in advance~
Tim

Hi,
Make the request forcefully into RED and then delete it, you can do it in RSMO or goto Obejct and Manage and then Click on YELLOW color Ball and then it will popup one window there make to red and delete it.
The reasons for Yellow
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then checl the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
Thanks

Broadband light blue, can get connection between d...

ADDED ADSL SETTINGS TO END OF THIS EMAIL
Please Help - getting desperate !!!
I have a BT Home Hub 3 and use wireless connectivity to communicate to the following devices -
MacBook Pro
Windows Laptop (used rarely)
iPad
Wireless printer
I intermittently experience a problem where, although my broadband light on the Home Hub was blue and I could get connection from my laptop/ipad to the Home Hub (i.e. on the MAC I can see the BT Home Hub on my Airport indicator and its a bona-fidae connection), there was no internet connectivity. This was an intermittent problem - some days I could surf fine, other days I couldn't get any internet connectivity. Also it is device agnostic - i.e. when the problem occurs it effects all my devices, when it is not evident all my devices work.
I went through the customer support helpline in september and the intermittent problem could not be solved. An engineer came out and replaced my Home Hub in September and things seemed to improve until December when the problem re-occurred and I was sent another new home Hub 3. This didn't solve the issue and at present I would say that 2 to 3 days a week I (randomly) get no internet connectivity.
Throughout the course of investigations several things have been tried with the customer support folks - these include -
Line checks - these confirmed broadband connectivity to the house was mostly fine
frequent resetting of the Home Hub
re-configuration of the Home Hub <-> device channel number. This was done several times and with different 'departments' in BT Support - e.g. once I got connected through to the 'MAC OS' folks who recommended use of channels 5,7 for Macs.
repositioning my devices to make them closer to the Home Hub (no difference as the home hub is very close to where I work in the house anyway)
switching on/off my Plasma TV!! (no difference)
on occasion these things have brought internet connectivity back on-line, but the intermittent problem invariably comes back.
This has become a real pain and its becoming impossible to do any planned work from my home office - any assistance greatly appreciated
ADSL SETTINGS AT the moment ---
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 01:10:50
Downstream:
7.813 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
6.4 dB / 29.0 dB
Line attenuation (Down/Up):
35.0 dB / 19.0 dB
Output power (Down/Up):
19.9 dBm / 12.7 dBm
FEC Events (Down/Up):
38825 / 0
CRC Events (Down/Up):
3 / 1

liammcquillan33 wrote:
Hi -
not sure why you have moved this into 'Wireless' - I'm not sure its a wireless problem. Can you move it back
You said
"I have a BT Home Hub 3 and use wireless connectivity to communicate to the following devices -"
There is nothing wrong with your ADSL connection statistics.
Try connecting to the home hub using an Ethernet cable to your computer.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Still no broadband light

My line was fitted on the 1st april and my activation date was 31st march. When the engineer installed the line i had no broadband light on the hub so i rang bt and they said the activation date was wrong and it was actually the 1st of aprill so i waited untill the 2nd and still no light, so i rang again and i was told i will now have to wait untill midnight 4th aprill. So i waited and still no broadband rang again and told me wait untill 6th aprill and guess what still no broadband. I have rang twice today and the guy said he would test my line and call me back and twice he never bothered to call back.
I am starting to get a bit angry now all i want is what im paying for it just seems like i will never see that broadband light come on.
What should i do?

just in case nobody calls you back I would contact mods for help http://bt.custhelp.com/app/contact_email/c/4951
if you get a call then you can always cancel mod help
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Broadband light is off

The broadband light is off. It has been 24 hours since the landline and hub were set up however it is not coming on. Please advise.
Solved!
Go to Solution.

Hi Andrey7777,
Sorry to hear about the problem you are facing,
If the broadband light is off, then that suggests that the line has a fault and is not allowing a broadband connection.
This link provides some useful information from CL Keith Beddoe:
http://forumhelp.dyndns.info/speed/adslmenu.html
All I can suggest is that checking the ADSL cable is plugged into the back of the hub and ensuring all sockets have microfilters.
This link also provides some useful info about what all the lights on the hub mean:
http://bt.custhelp.com/app/answers/detail/a_id/11397/~/what-do-the-lights-on-my-bt-home-hub-2.0-mean...
Are you connected to the test socket/master socket?
hope this all helps and makes sense,
Best Wishes,
Dominic.

Yellow broadband light then no internet

Similar Messages

Maybe you are looking for