Yellow/green line on top of screen while using back camera-3rd gen iPad .....explanation?

When I use my rear facing camera, a line appears atop the top of the screen....and help?

Try rebooting your iPad. Press and hold BOTH the power and home buttons at the SAME for about 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad will restart. You will not lose any data or settings. If after you've done this, there is no improvement, it would be advisable to make an appointment at your Apple Store Genius Bar and let them see it. If found defective, your iPad will replaced on the spot.

Similar Messages

I opened my brand new MacBook Pro the other day and noticed a straight green line from top to bottom near the center of the screen. What is it from and how do I get rid of it????

I am having a problem with my brand new MacBook Pro. After opening my laptop the other day I noticed a straight green line from top to bottom near the center of the screen. What is this from and how do I get rid of it? It is most annoying. Please Help!

"What is this from and how do I get rid of it?"
Such symptoms bode serious hardware issues and you shouldn't think about fixing it yourself when you are still in waranty. Get to an Apple Store, like the other poster suggests.

Thin flickering white line at the very top of screen when using mail

using an imac 27 inch, new...
there is a thin flickering white line at the very top of screen when using mail.
usually when sending a mail or when the cursor moves over a link ( in apple mail )
the flickering line is just under the very top menu bar which has the date on etc...
anyone else had this or know how to fix it?
cheers

I am facing the same problem. In fact mac book pro 13 retina was in the 14 day period so I got it retuned today, after directions from the apple telephone support. However, the new machine I got in exchange has the same problem or flickering line under the menu tab.
The only relief it seems is the fact that it's not a hardware problem probably. I also think so because if I do a full screen which essentially means there is no menu bar, then there is no flickering white line.
Hope apple fixes this. Sad to notice this drop in apple quality, and yet not fixed.

How to display horizontal line in top-of-page by using object oriented ALV?

How to display horizontal line in top-of-page by using object oriented ALV.
I am created top-of-page in object oriented alv.
But not be successes in showing horizontal line in it.
Can any one pls give solution for this..
Thanks and regards..

Hi
Try like this
data: gt_list_top_of_page type slis_t_listheader. " Top of page text.
Initialization.
perform comment_build using gt_list_top_of_page[].
form top_of_page.
* Note to self: the gif must be loaded into transaction OAOR with
* classname 'PICTURES' AND TYPE 'OT' to work with ALV GRID Functions.
* I Loaded NOVALOGO2 into system.
call function 'REUSE_ALV_COMMENTARY_WRITE'
     exporting
* I_LOGO = 'NOVALOGO2'
* i_logo = 'ENJOYSAP_LOGO'
         it_list_commentary = gt_list_top_of_page.
endform. " TOP_OF_PAGE
form comment_build using e04_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
      clear ls_line.
      ls_line-typ = 'A'.
      ls_line-info = 'Special'(001).
      fgrant = xgrant.
      concatenate ls_line-info fgrant
      'Stock Option Report to the board'(002)
             into ls_line-info separated by space.
                    condense ls_line-info.
      append ls_line to e04_lt_top_of_page.
endform. " COMMENT_BUILD
Use following syntex for footer print in alv:
* For End of Page
form END_OF_PAGE.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
* For End of Report
form END_OF_LIST.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
check this link
http://abapprogramming.blogspot.com/
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5dc3e690-0201-0010-1ebf-b85b3bed962d
Changing width of a custom container dynamically
Display Page numbers in ALV
Insert picture in selection screen.
Logo in OO ALV Grid
Reward all helpfull answers
Regards
Pavan

Flickering Screen while Using

Does anyone have the "flickering/blinking" screen while using the laptop? I also used the stress test and nothing has found.
Thinkpad w510
Core i7 Q820 @1.73GHz
8GB ram
Windows 7 64bit

mikesd wrote:
Turn off visual bell. In your screenrc add:
vbell off
Check the man page for details.
Problem solved. Thanks.

How do I view a website over the full screen while using the 6 plus in horizontal mode

How do I view a website over the full screen while using the iPhone 6 plus in horizontal mod?

You said you found several domain.sites files.
iWeb uses one at a time to create webpages.
Your webpages, your site, has disappeared with MobileMe.
You have to find a new host and publish there.
But to publish you need one of your domain files.
Try iWebSites to open them :
http://www.wyodor.net/_Demo/Aptana/iWebSites.html

F.E.A.R. 2 black screen while using Soundblaster X-Fi

This is my second attempt to get some support for a problem that is plaguing many trying to play F.E.A.R 2 with a Soundblaster X-Fi. We have been on the official forums for WBGames now for the past two weeks asking for help. Many were able to find solutions by updating their codecs however there are many of us that still cannot get into the game. WBGames official response it as follows...
Dear, xxx
Regarding your sound acceleration error and the sound cards you have used, we apologize for the inconvenience you have experienced.
At the moment, we have been noticed that certain Creative sound cards (X-Fi, Sound Blaster and Audigy) and Realtek are presenting incompatibility issues with the F.E.A.R. 2 application. Unfortunately, Creative Labs have not yet released a patch to solve this situation, as other companies like Nvidia have worked on.
F.E.A.R. 2 is designed to function with Windows XP/Vista compatible graphics and sound cards. Drivers for these devices are provided by Windows itself or the respecti've card manufacturers and may occasionally result in incompatibility problems beyond our control.
If there is anything else we can do to assist you, please do not hesitate to contact us by email at [url=mailto:[email protected]">[email protected] m[/url] or by phone 080-0664-9456 (in Germany) during the hours of EST :00 pm - 0:00 pm, PST: 0am- 8pm MON-FRI.
Thank you for contacting Warner Brothers and have a great day.
Refund option
If you are not satisfied with the performance of this product on your PC, you may return it with the receipt of purchase to the store from which it was purchased within 90 days from the original purchase date for a refund.
If you purchased this product as an electronic download, please visit the following site for refund details:
[url="https://support.steampowered.com/kb_article.php?ref=4938-WTDF-9465">https://support.steampowered.com/kb_...4938-WTDF-9465[/url]
I thought that someone with creative labs would be interested in either responding or releasing some kind of a statement in regards to this.
The current problem for us is when we try to launch the game a small animated orb runs at the bottom right of the screen while the game loads. At the end of the animation we hear a small chime and the screen goes black as though it is about to load the intro videos. But we get nothing. The screen remains black. I have exhausted all of their solutions, I have updated drivers and tried the latest beta drivers from Creative. I have removed, replaced, and updated codecs. Video card drivers are updated, etc.
Basically we are faced with the following dilema. We can disable the sound card in Windows and the game plays however with no sound. We can run the game in safe mode which manually disables the sound card and the game plays but with no sound. Leave the sound card enabled and run the game in normal mode and we get a black screen.
PLEASE, can someone with Creative Labs respond to this? We are looking for answers and would very much like to play this game.Message Edited by djdouglas on 02-20-2009 09:39 [email protected]

Re: F.E.A.R. 2 black screen while using Soundblaster X-Fi?
solace wrote:
Pardon me but i'm looking your Quad SLI setup a potential culprit to your problems. Have you tried disabling SLI mode to see if the problem can be resolved?
That was my first thought when I encountered this problem. I took the steps troubleshooting video. Disabled SLI, Physically removed one video card. Updated drivers, etc. I am currently running the 82.06WHQL drivers which are suppose to be enhanced for F.E.A.R.2 and other games.
My next step was to try uninstalling codecs as their support team had suggested for people running into issues with the demo version (which btw worked perfectly for me). There were tons of reponses by the devs and community managers before the release of the game in response to people having issues (these same issues) on the demo. So they released a patch the day before the release of the game and when everyone installed the game the patch automatically installed. So for me and many others that enjoyed a smooth gameplay in the demo our rigs are now not working with the official release.
Since release we have yet to see a response or fix or suggestion from a dev. There have been many others in the community that have helped each other out by posting their solutions. For most updating their codecs using Klite or Ace Mega codec pack has fixed their problem but for a select few of us these solutions have not worked.
Basically I can launch the game successfully in safemode which disables sound. I can also disable the sound card and launch the game successfully although without sound. The codec that has seemed to be effecti've when replaced by others is the Microsoft IMA ADHCP codec. However for me I can disable that codec and get a hardware accelration error but still get a black screen. Re enable it and get black screen with no error. So I do not believe this to be the issue plaguing me. Ultimately it is coming down to a conflict with my sound board and the game.

Used to zoom computer screen while using apple tv, since update, my screen is mirrored, but zooming doesn't show up

I used to be able to zoom in and out on my computer screen while using apple tv. For example, zoom in on a certain URL or ribbon. Since the update, my screen is mirrored, but when I zoom in and out to show my Word ribbon up close, etc., the zooming doesn't show up. My zoom preferences are set on computer.

You might try restarting your device, your router and your Apple TV.

HT1758 Can i connect my non apple laptop to my iMac and use the iMac as an extra/dual screen while using my laptop?

Got a new laptop from work, no choice on the type, but want to plug it's docking station into my iMac so I can use dual screens while using the laptop. Can I use the Ethernet port for this?

Welcome to Apple Support Communities
Target Display mode only supports Late 2009 and Mid 2010 27-inch iMacs, and Mid 2011 and newer iMacs to use them as external displays, but it only works over Mini DisplayPort or Thunderbolt, not Ethernet.
Your PC needs Mini DisplayPort or Thunderbolt (depending on your iMac) to be able to use your iMac as an external display, so it is probably that you cannot use the iMac as an external display. Instead, look for information in the Internet about VNC viewers that allow you to do that

IS there any way i can make something appear on the external screen or use the camera or microphone?

IS there any way i can make something appear on the external
screen or use the camera or microphone?

Hi. Sorry, but isn´t this something that has been around forever?
Regards
Lars @ søgemaskineoptimering

Who has the best replacement screen for a 3rd gen ipad?

Can anyone recommend where to get a good replacement screen for a 3rd gen ipad?

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
 Cheers, Tom

Why do I have a green line on edge of screen

New MacAir my pride and joy. I have only had it a few months from new and hardly used it. Now it has a green line running down the edge of the screen.
Is this a software problem or hardware problem?

Welcome to Apple Support Communities
That's a hardware issue, probably with your display. Unfortunately, the only thing you can do is to take your computer to an Apple Store or reseller to have it repaired. If the computer is in warranty, the repair will be free of charge

IPhone 5 App Store keyboard glitch -- persistent green lines at bottom of screen

I just brought home my new black 32GB iPhone 5 from the Verizon store. After using it for an hour or so, and switching over to WiFi, I entered my Apple ID password in the App Store to (re)download an app. My password requires me to switch to the ".?123" keyboard. The bottom ~1/5 of my screen became fuzzy, as though the keyboard overlay was sticking around longer than it should have. After a short time, glitch resolved to a state that's been "permanent" - vertical green lines. These green lines fade in slowly after I wake the screen from sleep. They've persisted through multiple power off > on cycles, a hard reset, and even through the upgrade to iOS 6.02. Interestingly, screen captures do not seem to grab these green lines.
Any ideas on how I can fix this, or am I going to have to get the phone replaced?

I think this is normaly. I've had some issues (gone through 6 replacements - not trivial issues, dead home button, dead camera, dead wifi that kind of thing). I noticed this on the 3rd replacement and everyone since. People are claiming that they have received "flawless screens" (whatever that means). I think the Sharp pannels are the ones that don't show these interlacing lines and AU Optronic pannels do. I have experience with AU Optronic pannels and everyone that I have ever owned (Motorola Xoom, PC Monitors, etc...) have done this. It is too bad that Apple settled for this manufacturer, but it is a gamble whether you will get one that doesn't do it. It is normal and within specs as most the iPhones at this point with have AU pannels due to Sharp's shortage.
The geniuses will likely not replace an iPhone for this reason. If you have AppleCare+ and have an incident in the future, perhaps you'll get lucky and get a sharp pannel put on to replace the AU pannel. But, there is no way to know which phones have which pannels.
Interestingly, I checked at the Apple store and 50% of the display models did it, and the genius that I spoke to's iphone 5 did it. You can find wall paper that is alternating black and white lines one pixel in width and it will cause the screen to flicker. Like you, I REALLY wish that apple DID NOT choose AU Optronics and if I had known I would have waited to purchase, but now I have it and cannot return it. I may sell it and move back to my previous phone. Given that the #1 selling feature is the retina display, it is disappointing to see a low quality pannel used. I really like the iPhone, but this is pretty much a deal breaker - and not knowing if you will get one that does it, or doesn't makes it very hard to "trust" a future production. I would rather have waited for the Sharp pannels and delayed getting an iPhone due to supply issues, than Apple finding an alternative, lower quality, source to produce them.

Yellow vertical line on 2009 mbp screen

I was wondering if anyone else has had this problem I have a 13" mbp 2.53 intel core 2 duo late 2009 model and the screen has recently developed a small yellow vertical line about 4 in from the right side of the monitor its obviously a screen issue because when its plugged in to the tv the line doesn't follow i have had this thing for less that two years and did not buy the apple care i have owned many apples and i'm kinda disappointed about all this especially because of how much this thing cost.

If you are in the U.S. and they won't cover it under AppleCare, these shops are often less expensive.
http://www.dttservice.com/
http://www.powerbookresq.com/
http://www.microdocusa.com/
http://www.macspecialist.com/
http://www.techrestore.com/
Your only argument might be if there is no physical damage to the machine, and you can tell them you have never dropped, nor let anything heavy lean against the machine, nor bumped the machine, nor over-extended its hinge, nor spilled anything into it. Then it might be arguably a manufacturer defect that AppleCare could cover if you still have AppleCare. If you didn't get AppleCare, let this be a caution note, that you have up to a year to purchase AppleCare to extend coverage for a full 3 years from date of computer's purchase.

After updating to ios5 the shortcut 'tapping top of screen' to scroll back to top does not work! Is there a way to get that back?

Since updating my ipad2 to iOS 5 the shortcut 'tap top of screen to quickly scroll back to top' no longer functions! How can I get this back?

It still works on my iPad - is it working on any of your apps e.g. Safari, Mail, Notes, and are you touching right at the top of the screen (I've seen a few other posts implying that the area of the screen that you need to touch isn't quite as deep as it used to be) ? Have you tried a reset to see if it works after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Yellow/green line on top of screen while using back camera-3rd gen iPad .....explanation?

Similar Messages

Maybe you are looking for