Yet another AVCHD post (specific to sony sr-1 mts import)

Wow was I hopeful that this cs4 version of PPro would be able work with the avchd / mts files created by my sony hdr-sr1. There is no hope...
"File format not supported" :-(
I've tried changing the extension to m2ts without any success. Looks like my $$ going to be spent on Vegas 8 Pro unless someone has other suggestions.
One more question -- I'm surprised at the limited number of project presets. Am i missing something here too?

Yes, it's the trial. Did I miss reading limitations in the trial?

Similar Messages

Yet another Slideshow Post!

Hi!
I've been doing Slideshows with FCP for a while all ala Ken Burns effects and synced to music and audio and video effects. Untill now I've been doing them in 4:3 PAL format but now I've been requested for a 16:9 one. Since this is only for DVD PAL:
1- What's the best sequence setting for doing this?
2- What kind of cropping do I have to apply to the images? (I've ben cropping in 4:3 to 1440x1152 compensating the square to non square pixels issue with good results but no sure now what to do)
PD: This is a reedition of an old 4:3 Slideshow, so assuming it's 100% JPEGS, is there a way to chage it to 16:9 without having to re-edit again?
Thanks for reading my question.
PowerMac G4 1.42 Dual FW 800 Mac OS X (10.4.3) 2 GB RAM, SATA HD's

Just to add to this. When a client gets a lease (Ip address with a timer, set in the DHCP server, could be seconds to days and more), it will continue to use that Ip address until the lease expire (in practice it will aks for renew if possible before expiration), in which case it will ask the server renew its present IP address/lease, if refused (IP taken sorry) then starts negotiating all over again to establish a new Ip address/lease (as opposed to renewing).
Even if the client rebooted (it has the IP address/lease in its databse as well as on the server), it will contact the server to either continue using the current information, or if it is taken then it will negotiate all over again.
However, keep in mind that the server has a databse of ip address and leases given out. So it will never give the IP address unless the lease expired and the client has been out of touch for some time.
usually, you will notice that DHCP servers will go through their pool first before reusing a given Ip address (given in the past) even when it is expired. So as to avoid any conflicts. MY wireless pool is for 50 devices and wired for 5 addresses (since I only have 5 ports).
That why most likely when you come back after a month (say the originial lease is for a week and expired) and connect your client (Iphone for example) you wil likely to get the same IP address. Unless the DHCP server was dishing a lot of IP addresses and recycled its pool.
However, if you left the DHCP server on in the repeater (now you have 2 DHCP servers), then you will end up with two conflicting databases for the dished IP adresses.
Hope this helps.
Hope this helps.
Message was edited by: jamalaya
Message was edited by: jamalaya

Yet another EL post (I apologize in advance)

I've tried searching the forums before asking this question, but haven't found anything to solve my problem. Initially, the issue is the same many others have: EL expressions are being ignored. So I added in the page directive, and this was the response:
1 error(s) found in /grucom/jsp/Alice/siteDev/doRetrieve.jsp
(1) The page has invalid attribute(s): [isELIgnored]
I've provided the code below. I don't have the authority to modify the web.xml file (I'm just a temp here) and we have so many system administrators in this organization that I have no idea who to contact about fixing it (or, for that matter, if they WOULD). Is there a workaround for using EL? Anything? Ultimately I just want to be able to send variable strings instead of literals to my custom tags.
<%@ page isELIgnored="false" %>
<%@ page errorPage="error.jsp" %>
<%@ taglib uri="../../../../WEB-INF/classes/gcos/taglib/email.tld" prefix="email" %>
<%
     String errmsg = "";
     String email = request.getParameter("email");
     if (email.equals(null)) errmsg += "<LI>Please enter your email address (login)";
     if (errmsg.equals("")) { %>
          <email:send to="${param.email}" subject="Your GCOS Password" content="password" />
     <%     response.sendRedirect("index.jsp");
     else {
          session.setAttribute("errmsg",errmsg);
          response.sendRedirect("pwdRetrieve.jsp");
%>

Are you using JRun3 or JRun4?
I have used JRun4 previously, and it worked fine for custom tags, and the JSTL 1.0, though EL expressions ARE limited to the JSTL tags.
To get the full information on your server you can include this in a JSP page
ServerInfo = <%= application.getServerInfo() %> <br>
Servlet version = <%=application.getMajorVersion() %>.<%= application.getMinorVersion() %>That should tell you exactly what version you have, and what you can do.
This is one of the few times I might advocate putting a taglib entry in the web.xml
<taglib>
    <taglib-uri>/gcos/email</taglib-uri>
    <taglib-location>/WEB-INF/classes/gcos/taglib/email.tld</taglib-location>
</taglib>This sets up a mapping between the taglib uri (which is just a string), and the tld file on disk.
The container SHOULD pick this information up automatially with an entry in web.xml, but this might give it a kick in the right direction if it is having trouble.
Good luck,
evnafets

Yet another audio post

Much like everyone else here, I'm having the no audio output device is installed problem. I am simply going mad now... Here's a bit of a background.
The laptop is a dv6815nr that came with Vista Business and everything worked fine until I upgraded (well, tried to, had a power outage and the entire partition got corrupt so I had to format fresh) to Windows 7 Ultimate. From that point the CDROM stopped working, can't boot off CDs/DVDs though that's fine. Now out of nowhere the sound has disappeared. System restore didn't help, tried a clean whipe again deleting the entire partition, still no good.
In the services it's running, no sound in the device manager so I can't update/uninstall the driver. When attempting to install either Conexant or Realtek I get an error saying no device found. I'm assuming that the problem is that the computer no longer detects the sound card or whatever else that'd cause that.
Short version (for those who don't want to read all of that) - Upgraded a dv6815nr laptop from Vista to 7 now I have no sound. No sound deviced in the device manager, and can't install Realtek.

Hi BehiiMehii,
Please go to the device manager and check the audio card you have. Afterwards, try downloading the appropriate driver from the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3686...
Since there are no Win7 drivers available for your model, you might try with the Vista driver available, which does work at some cases... Install them in Compatibility Mode.
Steps to install driver in Compatibility mode:
1. Place the driver installation file on the Desktop.
2. Right Click the driver installation file and select Properties/Compatibility Tab. Select the appropriate options in from the list in the following image.
3. Click apply/OK
4. Right Click the file and select the Run As Administrator option to install.

Yet another dead mic with Win7 64-bit upgrd - Portege M700

Title says it all. Mics used to work fine on this machine under Windows XP. Under Win7, except as I note below, the mic has inaudibly low volume with any Control Panel Sound settings. I've spent huge amounts of time trying to solve this. After seeing all the similar posts (with no solutions, it seems) from users of many different Toshiba laptops, I'm about to start spreading the meme across the Internet that Toshiba laptops can't use mics.
I started by upgrading to Win7 then adding just the 64-bit drivers I need from Toshiba's support site. No joy. Then I started from a clean Win7 upgrade (64-bit Home) using Toshiba's upgrade script. Nope. Installed latest generic drivers from Realtek. Hmm .. some progress, maybe: now with some Sound settings I can get slightly more volume but the mic input is drowned out by white noise-ish hissing. All right, disable any other sound sources I can adjust: disable Chicony webcam driver from Device Manager. Hmm, now mike volume can get fairly high but the hissing still drowns it out.
Toshiba: At some level, this is a problem between Microsoft and Realtek, I know. But you can help us. MS changed the audio model significantly since Win XP, including (god knows why!) giving up the little audio mixer app that used to let you adjust levels for different sound sources. And Realtek's generic driver doesn't provide one either. So just give us a way to adjust levels for different audio inputs! Maybe I haven't Googled sufficiently and some hacker out there has one, but I kinda doubt it ... if it requires driver-level access as I suspect, Microsoft's new DRM-motivated hammerlock limiting us to signed drivers prevents us from fixing this ourselves. (It also means we can't access our ext3 partitions without extreme measures, but that's another rant.) So CAN SOME TOSHIBA ENGINEER PLEASE LET MANAGEMENT KNOW THEY'RE ABOUT TO DESTROY THEIR LAPTOP FRANCHISE OVER AUDIO ISSUES? Just cut, paste, and forward a couple dozen of these threads. Sure, it's a career risk but (wo)man up to it! Audio really matters to laptop buyers nowadays ... without Skype, I'll have do carry Yet Another Device when I'm traveling. Heck, I've personally bought at least 6 Toshiba laptops over the years and I'm starting to shop for a replacement. Anything but Toshiba, I'm sorry to say :-(
Oh, in case somebody has an idea of something else I can try, the specific model is PPM70U-1KC01DB

Title says it all. Mics used to work fine on this machine under Windows XP. Under Win7, except as I note below, the mic has inaudibly low volume with any Control Panel Sound settings. I've spent huge amounts of time trying to solve this. After seeing all the similar posts (with no solutions, it seems) from users of many different Toshiba laptops, I'm about to start spreading the meme across the Internet that Toshiba laptops can't use mics.
I started by upgrading to Win7 then adding just the 64-bit drivers I need from Toshiba's support site. No joy. Then I started from a clean Win7 upgrade (64-bit Home) using Toshiba's upgrade script. Nope. Installed latest generic drivers from Realtek. Hmm .. some progress, maybe: now with some Sound settings I can get slightly more volume but the mic input is drowned out by white noise-ish hissing. All right, disable any other sound sources I can adjust: disable Chicony webcam driver from Device Manager. Hmm, now mike volume can get fairly high but the hissing still drowns it out.
Toshiba: At some level, this is a problem between Microsoft and Realtek, I know. But you can help us. MS changed the audio model significantly since Win XP, including (god knows why!) giving up the little audio mixer app that used to let you adjust levels for different sound sources. And Realtek's generic driver doesn't provide one either. So just give us a way to adjust levels for different audio inputs! Maybe I haven't Googled sufficiently and some hacker out there has one, but I kinda doubt it ... if it requires driver-level access as I suspect, Microsoft's new DRM-motivated hammerlock limiting us to signed drivers prevents us from fixing this ourselves. (It also means we can't access our ext3 partitions without extreme measures, but that's another rant.) So CAN SOME TOSHIBA ENGINEER PLEASE LET MANAGEMENT KNOW THEY'RE ABOUT TO DESTROY THEIR LAPTOP FRANCHISE OVER AUDIO ISSUES? Just cut, paste, and forward a couple dozen of these threads. Sure, it's a career risk but (wo)man up to it! Audio really matters to laptop buyers nowadays ... without Skype, I'll have do carry Yet Another Device when I'm traveling. Heck, I've personally bought at least 6 Toshiba laptops over the years and I'm starting to shop for a replacement. Anything but Toshiba, I'm sorry to say :-(
Oh, in case somebody has an idea of something else I can try, the specific model is PPM70U-1KC01DB

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Thanks for your advise.
However, I missed to mention that we have two set of users One is for Finished Goods and another for Spares.
Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
Further, I tried to test one scenario through Processing Constraints but it did not work.
Application
OM
Validation Type
Entity
Temp
Short Name
TBL
Validation Semantics
Created By
Equal To
User(Myself)
Processing Cosntraint
Application
OM
Entity
Order Header
Constraint
Operation
User Action
Create
Not Allowed
Conditions
Group
Scope
Validation Entity
Record Set
Validation Template
101
Any
Order Header
Order
Above Created
Please advise.

Display hints, custom format method in VO, is there yet another way?

Did you experience the same and had a solution?
Hi,
I am using JDeveloper 10.1.3.4 and looking for yet another way of customizing the display of an attribute of a view object.
I have two tables: BILL and AWARDS, with composite foreign key relationship (on the LDAP_UID and TERM fields) between them, as illustrated below.
The BILL table:
NAME       LDAP_UID    TERM   CREDIT_HRS
Tom Smith tom.simth   200902       12.5
Jane Lopez jane.lopez 200906        4.0
The AWARD table:
LDAP_UID    TERM SOURCE     APPLIED
tom.smith 200902 Perkins     2000.00
tom.smith 200906 Direct      1300.00
jane.lopez 200906 CN           500.00 At the business data model level, this is master(Bill)/detail(Awards) relationship. Bill is dragged from the data control palette to the page and displayed as a form, and Awards is dragged to the page as a table. When tom.smith logs in and chooses the 200902 TERM, the master and detail are joined on tom.smith=tom.smith and 200902=200902, so the $2,000.00 of Perkins loan is retrieved for him:
Name Tom Smith
Term 200902
Source    Applied
Perkins   $2,000.00That works fine but not user friendly: the values in the TERMS column are a bit cryptic and need to be displayed in plain English, i.e., 200902 should be displayed as "Spring 2009" and 200906 as "Summer 2009". The display hints in the VO can not handle this. The only other way I know is writing a method in the Row class of the VO to do the translation. And this is the result:
Name Tom Smith
Term Spring 2009
Source        Applied
No rows yet   Obviously, "Spring 2009" is used not only for display, but also for joining the master and detail tables. Of course "Spring 2009"!=200902, therefore no detail is retrieved for the user.
Question is: is there yet another way to customize the display, that does not affect the join of master and detail tables?
Many thanks for your help!
Newman

Hi, Chris,
That works!
I found the chapter where transient attribute is explained and an example is given creating a transient attribute in the entity object. It turned out that transient attribute works both in entity object and view object. I did it in the VO and it solves my problem.
I spent hours of time before posting that question, trying two different ways but neither worked. Your one sentence saved me a lot of time. I do appreciate you help very much!
Truly,
Newman

Yet another "fail to respond".....

I've had a look around on the posts and can't find a problem that quite matches this. I bought my parents a G5 iMac with an external iSight just over a year ago. We've been using iChat happily since then, til today.
Originally I had G4 iMac with iSight on panther. Since then we've both upgraded to Tiger, and I've upgraded to a G5 iMac 2.1 with built in iSight. Still no problems. Just after christmas I invested in a Zoom ethernet modem and tonight was the first time since then we've tried to iChat. Depending on who's trying to accept the chat, they recieve the message that they have failed to respond.
Both firewalls are off and encryption is not enabled. This would suggest to me that it might be my new modem. So I powered up my old G4 connected with my old modem, but still no audio or videochats, with the same error messages.
I don't see why I should be getting the same problem with my old set up too when it worked fine before (G4 running Tiger too).
Any thoughts?

HI Veeto,
Ok your parents may have set up Port Forwarding like this (I can not UPnP listed on this screen shots).
UPnP stands for Universal Pug n Play.
It is one means of making sure the Ports in a cable or ADSL modem are open.
Port Forwarding is another and Port Tiggering is yet another.
Sometimes a cabele modem can be set as a Straight through device much like a USB modem.
An ADSL modem is likely to come with some ports pen by default which allow you to Plug and Play with your Web broswer and Mail applications and Send and get files over FTP.
However iChat uses ports ports above the 1024 threshold for these open ports. This means you have to open the ports.
If you have the Access IP and Default Password and User ID for your 5660ADSL modem then you will be able to do the same.
The page I linked you to has all the ports you need for AIM and Jabber accounts to work.
This is on of the other Zoom's Pages for the same thing. Similar but different.
You should be able to work out how to set yours up.
Ideally you need to use UPnP or Port Triggering to use two computers at one location with iChat as these both allow multiple computer to use the same ports (Port Forwarding does not).
It might be you have newer firmware on your modem than is shown in these pics and you might have UPnP.
http://www.zoom.com/techsupport/adsl/adsl_x3.shtml (Firmware page).
I do not see that it says it has UPnP on thier site.
Ralph

Yet another export issue with Aperture 3

Judging by a search of topics, there seem to be a myriad of problems associated with getting files out of Aperture, some of which represent occult setting issues, others which seem to be actual bugs. I've run into an issue which seems to defy categorization, and I'm not sure if it's me doing something wrong, or if it is actually yet another bug with this software. I've been an Aperture user since 1.0 and I have to say the current version I'm running (3.4.3) is by far the worst yet. Anyway, enough whining. Here are the issues:
I'm running Aperture on a 6 core Mac Pro with Lion 10.7.5. There are two thing happening.
1. Exporting JPEGs is INCREDIBLY slow - perhaps as long as 4 or 5 minutes for a 3MB file.
2. This is the one driving me batty right now. Tried exporting a batch of images as JPEGs at the 50% original size setting. The master files are large 16 bit TIFF images from Nikon D800 RAW files, post-processed in Nik HDR Efex Pro 2. They are 80-100MB in size. When I export the images to a file on my Desktop, it consistently exports 6- 10 KB thumbnails. I've checked and rechecked my export settings and can find nothing amiss there. Has anyone else had a similar experience? Could the view I'm working in have anything to do with this? I work 95% of the time in split view.
Thanks,
Russ

I agree that there re a lot of posts about exporting, but a very large number of them refer to the same thing, and it's not a bug, but rather a misunderstanding.
For instance:
Tried exporting a batch of images as JPEGs at the 50% original size setting.
Okay.
The master files are large 16 bit TIFF images from Nikon D800 RAW files, post-processed in Nik HDR Efex Pro 2
Not relevant.
They are 80-100MB in size.
Not relevant either.
Why?
Because size refers to the dimensions of the image. So a 1,000 x 1,000 pixel image exported at 50% will turn out as 500 x 500 pixels.
Were you expecting a jpeg between 40 and 50 MB? That's Jpeg quality or the amount of compression applied to the image. And as you're compressing a lossless format (tiff) to a lossy one, and one with an aggressive compression algorithm, he resulting Jpeg, even at high quality, will be much, much smaller, more likely in the 6 - 8 MB range.
That's the nature - and indeed the point - of Jpegs.
So, if you're getting 6 - 10 kb images, you're exporting at a very low Jepg Quality.
This may also explain why it's taking so long to export. Getting rid on 99.99% of the data and compressing into 10kb is always going to take time.

Carbon - yet another terminal emulator

What is carbon?
Carbon is yet another terminal emulator aiming at minimalism, speed, functionality, and aesthetics. As an added bonus, the code is very modular.
Carbon is built on xcb instead of Xlib. There has yet, to my knowledge, a terminal emulator built like this. This should prove to provide a faster and more responsive terminal.
Features
* Support for managing different colour themes.
* Ability to install custom escape sequence handlers.
* Daemon mode much like urxvt, possibly with some degree of detaching/reattaching support.
While I haven't figured out how I'm going to handle configuration, I will utilize custom escape sequences to control certain settings. For example, unless I find it unsatisfactory, carbon will provide a shell script for theme changing/previewing, relying on escape sequences to tell the terminal what color theme to use.
The code it somewhat suckless inspired, it will utilize a config.h file by the time its done. However, I have a somewhat bigger aim on making carbon modular than most suckless projects. The terminal emulator back-end should be easily reusable other projects.
Current status:
* I can create a tty and read and write from it.
* I can parse CSI escape sequences (but I ignore them for now)
* I can read keypresses from a windows and send the appropriate character to to the tty (at time of posting, this is not committed to repo).
Not really worth running as it doesn't draw to the screen yet, but its getting there.
Thanks to:
* st, madtty: This project was largely written looking at how they did things; my code ranges from very similar to blatant rip-off.
* Awesome: I gutted their keycode->keysym->string code to get input working. Kudos for adopting xcb.
Heres a link to the project on github: github.com/simongmzlj/carbon
Thanks for your time. Any comments, ideas, or criticisms would be appreciated.

Sorry, I really wasn't very clear, and I'm not positive how to say it. I'm perfectly happy with being able to scroll through history. That's a useful feature. But consider this situation: You're checking out the git man files. This gives you a page far longer than your terminal is, and you work your way down to the command you wanted to check out. Then, when you quit, I prefer if the info stays on your screen instead of removing the git man page and going back to what you had before calling man. Hopefully that makes sense. If not, think the default behaviour of screen (prefered) vs. xterm.

Yet Another Soon to be MBP Owner in Need of Guidence

Hello all,
Believe it or not this is yet another post from a college student in the process of purchasing a new MBP who's appealing to the venerable Apple discussion board community for guidance. My dilemma is not that I can't decide on what MBP I want or what features I need, I've already decided on a top of the line model with the 7200 RPM hard drive and a Crucial ram upgrade, it's that I can't decide when would be the best time to make the purchase given the WWDC keynote on the 7th of August. I would like to get the most bang for my three grand but I need have the computer up and running by the twenty-first with Windows installed to run AutoCad. Would you recommend waiting until the 7th to order the computer and see it the MBP's are updated with the hope an updated MBP would be able to get to me in time or should I buy now with the knowledge that I'll be buying a computer that will be updated, but not outdated, soon?
Thanks for your time,
Eric
PowerBook 12-inch 867

I am also a college student... and I was going to wait for the new merom, but I decided against it... I just think the likelyhood of them released before september is unlikely in my head... but you never know... But I looked at it this way... I wanted a MBP bad, despite all the problems I heard about them (my mbp has no problems to this day).... I figured if I waited for the new releases, the only thing that would change is the fact that it's basically a new computer, and with new computers come with new problems... I also figured, the likelyhood of the computers being released before my school started was slim, so I bought it now. I am very happy with my MBP right now, and you have to think of it this way, there will always be upgrades, whos to say that after the merom has been released, something new will becoming after that... I find it less painful to buy a MBP in july, and have the meroms be released months later, then purchasing it in september, and having them be released a possible weeks later... a little less painful, but that's my input, do what you want, I have a 17" MBP , week 26, and I am a happy camper!

Slow DSL (Yet another one....)

I have been in contact with Verizon (via off shore support on their 'tech support line') over the past few months and I have YET to get this issue resolved. Since mid-summer 2010 I have been getting 1.6 meg or so speeds on my 3meg DSL line. Prior to that period I was getting 2.5 meg +. I have called in numerous times and I keep getting told they will perform a line test.... Well, the line is FINE it's my download speed that's hosed. My upload is the correct speed of 728 but for some reason my download speed has been slashed from 2.5 to ~1.5.
Verizon even sent me a new modem as my old westtel was from 2001 and it had no better, (perhaps even slightly slower!!!), speed results on JUST the download side.
Other Verizon DSL users suggest that there is some sort of bandwidth throttling or "error correcting" processes that can cause this sort of thing. I live right around 6,000ft or so from the switching station so I'm WELL within range to get the full benefit from my speed. No lines have changed inside the house in years, yet there is a decrease in speed none the less. I have tried various speed test sites, various combinations of network hardware between the PC and the router and nothing helps.
To make matters worse I called in last week and spoke to another off shore "tech" (script reader more like it), and after cutting him off from trying to walk me through a ton of useless steps that I've gone through about 4 dozen times already and telling him NOT to send out yet ANOTHER modem, had this gentleman tell me that he needed to work with the local dispatch center but it was closed. He arranged to call back the next day between 5 and 7 PM EST with them on the phone to further trouble shoot and get the problem solved. Fine. However, next day, I didn't receive a call back until almost 8:45PM .... AND he started the call off by asking, "So is your problem resolved?" ...... I promptly, and with as much patience as I could muster, told him, "Um, not unless you have done something to FIX it in the time since I last spoke to you..." ... To which he responded by starting the ENTIRE trouble shooting process over again and wanting to run a LINE TEST (which would have raised the count on JUST this one ticket to like 5 or 6!). I cut him off and told him we'd already DONE all that and he was SUPPOSED to call me back at 5:00 not 8:00 with someone from the dispatch so we could sort the problem out! He then told me the dispatch was closed and he'd have to call me back the next day between 3:00 and 5:00 PM EST with a supervisor tech on the line to help diagnose the issue.... That was last Friday... A week later and I still haven't heard from Verizon support.... So first time he was 3hours and 45 minutes late, the second time he was over a WEEK late!
At this point I'm fed up, yet I'm hoping that by posting this here someone MAY be able to help me and FINALLY restore my 3Meg DSL to it's former speed.

I have a LinkSys WRT 310N router between my internal network and the router or I'd pull you the transponder data. As for the other info you asked for: It's a Westel modem, and it's Windows 7 x64... Though every system in my home has the same speed results regardless of OS. Even if I remove the router and connect using the built in PPPoE connection in Windows I get the same speeds, so it's not OS or router related. The modem is a new modem, my old Westtel Wirespeed gave exactly the same results as the brand new westtel modem, so it's not the modem either unless BOTH are bad.
****EDIT****
I found a transponder log I'd taken when I first got the new westtel setup and posted on another forum:
Transceiver Revision: 3.3.6.10.0.1
Vendor ID Code: 4D54
Line Mode: ADSL_2plus
Data Path: Interleaved
DSL Speed: 2112 down and 860 Up
Margin (dB): 12.0 and 10.3
Line Attenuation (dB): 33.1 and 15.0
Transmit Power (dBm): 17.9 and 12.2

I have video created in AVCHD format on my Sony camcorder and stored on my PC but do not seem to be able to add it to my iTunes library. How can I do this?

I have video created in AVCHD format on my Sony camcorder and stored on my PC but do not seem to be able to add it to my iTunes library. How can I do this?

Did you try what I suggested in the post you already made for this problem?

Yet another dimension of Yahoo IMAP suckage

Just when I thought I'd had all the frustration I can handle with the terrible integration of IMAP support for Yahoo accounts (and as stated before I really have no idea if the problem resides with AT&T/Yahoo or Palm), I discovered today that there's yet another possible weirdness that can happen -- duplication of the entire inbox. What I had happen multiple times is that a new message would come in, and when it went to fetch it, it would also fetch all email again from the last 7 days (the cutoff I have set, because as often as I have problems and have to delete the account, there's no point loading any more than that), such that I had 2 copies of every message. Then if I manually refresh (sometimes I had to leave the inbox and go back, sometimes not) it would properly remove the duplicates and set the message count correctly again.
Here's the part that has to be a bug on the Pre, well-documented on this forum by now -- every time this happened, even once the message count was back to the proper value, the disk space used for email grew. So those duplicate messages were being orphaned in /var/luna/data/emails every time, taking away valuable application space made critically important by the failure/extreme delay in addressing the app space limitation issue.
I have no idea if it's done doing this yet. I just sent a test message and it didn't happen that time. I have already deleted and re-added the account once and it happened again twice after that, so it's not some weirdness with the account unless it recreated itself again right away.
We really ought to be past this type of issue by now. IMAP email is not exactly brand new technology, and plenty of folks are having issues with POP as well. We ought to be reaching a point of maturity in WebOS and the core applications that makes it a solid foundation on which to add features and develop apps for. But it's just not. Every new update, while it fixes some things, breaks others, and some of these systemic and long-standing issues have yet to be addressed (again, except for the disk space growth, I don't know for sure that the Pre is doing anything wrong, but that alone is still a huge issue that doesn't seem like it would be hard to pinpoint). I said from the beginning I was willing to wait for this phone to grow into its potential, and I still am, but I expected more progress by now.
-- robert
Post relates to: Pre p100eww (Sprint)

Just an update. The loading of duplicate messages appears to have stopped, at least for now, but things are still not working normally. Some messages are simply missed until I do a manual refresh. In other words, say I get message A at 1pm. I can see it in my inbox via webmail, but it's not on the Pre. Then I get message B at 1:30. I see it after message A in my inbox in webmail, but on the Pre, I get a notification for B, and see B in my inbox, but A is not there until I do a manual refresh, and at that point the order even on the Pre confirms that A arrived first. This has happened twice this afternoon, and I can't say as I've every seen that behavior prior to today. I really am beginning to wonder if email is ever going to work properly on this thing...
-- robert

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer.

Yet another AVCHD post (specific to sony sr-1 mts import)

Similar Messages

Maybe you are looking for