You have no authorization for this transaction in plant: M7120

Hi guys.
I am getting the error message(M7120) "You have no authorization for this transaction in plant XXXX" when performing 101 movement for production order using MIGO.
/nsu53 doesn't return any object. Why?

Hello Arun,
It is a standard message. SU53 should show the exact authorization object which has been blocked. Or you can also try to check this with T code ST01.
Refer the below threads & seek help from your basis consultant to get this resolved.
Authorisation missing
authorization error in mbbs transaction | SCN
Regards
Mangesh S

Similar Messages

  • No authorization for this transaction with mvt type 101

    Has anyone seen this error:
    RFC BAPI Wrapper call:You have no authorization for this transaction inplant 1120      
    RFC BAPI Wrapper call:You have no authorization for this transaction with mvt. type 101
    RFC BAPI Wrapper call:You have no authorization for this transaction inplant 1120      
    The strange thing is that when I assign user with a different Personnel Number and it works just fine.  But when I switched back to his Personnel Number, then I get above error.
    Even though I don't get any order list but I got all notifications and technical objects.
    Also, this user has same roles with everyone else.  While everyone is working fine this user is the only one that getting the error and no order download to PDA.
    Regards,
    Dai Ly

    Hi,
    please run ther getlist and getdetail handler in the backend directly for that user - most likely you will get a better failure message there.
    Nevertheless - what Application  yre you using? Is it MAM? If yes, check the SPRO setup for this particular user,
    Regards,
    Oliver

  • For my user id, I have the authorization for the transaction, but still iam getting the error that, you don't have authorization, plz suggest?

    Hello ,
    For my user id, I have the authorization for the transaction, but still iam getting the error that, you don’t have authorization, plz suggest?????
    Thnks

    Hello Sampath,
    after you have received the error message about the no authorization, run transaction SU53.
    This transaction shows which authorization has failed last time.
    Best regards,
    Laszlo

  • No authorization for this transaction with movement type 601

    Dear All,
    This is chandra i am getting this error in delivery level " No authorization for this transaction with movement type 601. If give the authorization for SAP ALL its working fine. If give the authorization for SAP SD T.Codes i am getting this error. Plz help me.
    Thanks and regards
    Chandra

    Dear Chandra,
    Check with -
    T. Code: OMJJ
    Select Movement Type: 601 and Double-Click: "Allowed Transaction" (From Left-hand side) .
    Check whether the Transaction is allowed for Movement Type 601 or not
    Note: if Transaction is not listed (i.e. not allowed) and you wanna allow this Transaction with Movement type 601, then -
    Up-there, Tab: New Entry. Click on it.
    Maintain entry as:
    MovTy: 601
    TCode: As reqd.
    and Save.
    Best Regards,
    Amit

  • Error from BAPI_ALM_CONF_CREATE - "YOU HAVE NO AUTHORIZATION FOR T-CODE"

    Hi guys.
    I am getting an error message from the BAPI_ALM_CONF_CREATE with the DETAIL_RETURN returning "You have no authorization for the t-code".
    The error is arising from the form AUTH_CHECK_TYPE.
      AUTHORITY-CHECK OBJECT 'C_AFKO_ATY'
           ID 'ACTVT' FIELD tmp_actvt
           ID 'AUTYP' FIELD act_autyp.
    Thanks in advance.

    Hi,
    This might be beacuase you do not have authorization to that Tcode.
    Go to SU53 tcode and check authorizations You have for your User name. Ask Basis people to provide authorization to the Tcode for your User id.
    Regards,
    Karuna

  • BPS You have no authorization for the requested data

    We are implementing Hierarchy node based security for our BPS.
    When the user tries to display the planning layout, they get the error message "You have no authorization for the requested data "
    I have given authorization to the relavant Infocubes, also checked the all the Authorization Relavant Info Objects and added theses Info Object to the custom authorization created in RSECADMIN.
    Also added the info objects 0TCAACTVT, 0TCAIPROV, 0TCAVALID to the custom authorization.
    In pfcg, this authorization has been added to S_RS_AUTH. I have also given activity 02, 03, 16 values and a * to planning areas, functions, packages, groups, levels, folders, ... to the objects R_AREA
    R_BUNDLE
    R_METHOD
    R_PACKAGE
    R_PARAM
    R_PLEVEL
    R_PM_NAME
    R_PROFILE
    But still we get the same error.
    Has anyone encountered this problem? Can you please provide me some clues to resolve this issue

    Thank you very much Grevaz, but that template does not help.
    I did run both ST01 trace and BI RSECADMIN trace.  RSECADMIN Trace shows the below authorization failure
    Subselection (Technical SUBNR) 1  
    Supplementation of Selection for Aggregated Characteristics
      No Check for Aggregation Authorization Required  
    Following Set Is Checked  Comparison with Following Authorized Set  Result  Remaining Quantity 
    Characteristic  Contents 
    0FUNDS_CTR
    0TCAACTVT
    SQL Format:
    FUNDS_CTR BETWEEN '4012001000'
    AND '4012001999'
    AND TCAACTVT = '03'
    Characteristic  Contents 
    0FUNDS_CTR  Node 1 I EQ #
    I EQ :
    0TCAACTVT  I EQ 02
    I EQ 03
    Partially Authorized (Average)   Characteristic  Contents 
    0FUNDS_CTR
    0TCAACTVT
    SQL Format:
    FUNDS_CTR > '4012001000'
    AND FUNDS_CTR <= '4012001999'
    AND NOT FUNDS_CTR IN ('4012001001','4012001002','4012001003','4012001004','4012001005','4012001006','4012001007','4012001008','4012001009','4012001010')
    AND TCAACTVT = '03'
    Value selection partially authorized. Check of remainder at end
    Following Set Is Checked  Comparison with Following Authorized Set  Result  Remaining Quantity 
    Characteristic  Contents 
    0FUNDS_CTR
    0TCAACTVT
    SQL Format:
    FUNDS_CTR > '4012001000'
    AND FUNDS_CTR <= '4012001999'
    AND NOT FUNDS_CTR IN ('4012001001','4012001002','4012001003','4012001004','4012001005','4012001006','4012001007','4012001008','4012001009','4012001010')
    AND TCAACTVT = '03'
    Characteristic  Contents 
    0FUNDS_CTR  Node 1 I EQ #
    I EQ :
    0TCAACTVT  I EQ 02
    I EQ 03
    Not Authorized   
    All Authorizations Tested
      Message EYE007: You do not have sufficient authorization  
      No Sufficient Authorization for This Subselection (SUBNR)  
    Following CHANMIDs Are Affected:
    206 ( 0FUNDS_CTR )
      Authorization Check Complete  
    We have created custom authorization and trying to restrict based on hierarchy node.
    One point I observed is, when I give access to all nodes with a wildcard * in the custom authorization, then the error disappears and the layout is visble. But our point here is to try to restrict based on the nodes and we cannot give display access to all nodes.

  • You have no authorization for the requested data

    Hi Gurus,
    While trying to display data in manual layout it shows the erros as
    You have no authorization for the requested data.
    Any reason behind that.
    Thanks,
    Debasish

    Hi Debasisha
    I faced the same problem yesterday, as Ivan told apply the transaction code rssm. In Business Information Warehouse Authorizations window go to checks for InfoProvider and select your Cube and click the change button. in that window you can see the which infoobjects are selected under switched on column deselct the checkboxes for authorization obj. save -  refresh
    and go to BPS screen execute your layout you can find your layout. I solved my problem like that.
    Hope it helps you.
    Regards,

  • You have no authorization for Cont Acct Cat. 02

    Hi Experts,
    When creating a Contrat Account CAA1, I face the following error:
    You have no authorization for Cont Acct Cat. 01.
    Where can I get granted to this Contract Acct Cat.
    I try solving this issue by  created my own Cont Acct Cat. 02. But the issue still ramain unsolved.
    Can you please assit with ?
    Thanks in advance,
    Tierno

    Hi,
    This is a Security set-up issue.
    I would suggest doing an SU53 screen dump after you get this error.
    Then send the screen dump to your Basis Security person. They should be able to decipher the Security violations and authorisation objects etc.
    Regards,
    Ivor M.

  • I bought my iphone 5 in Houston Texas May 15 2013 IMEI Nr. 013428009645399.The problem is that in the Greece the country which I live the 4G is not working.If you have any solution for this problem pls. let me know.My email is philcoueth@yahoo.gr Thank yo

    I bought my iphone 5 in Houston on May 15 2013.
    IMEI 013428009645399.The problem I have is that in the country
    which I live GREECE the 4G is
    not working.Please if you have any solution for this
    problem let me know.My email is [email protected]
    Thanking you in advance
    Philip Couridis

    iPhones purchased in the US are NOT guaranteed to work with 4G bands outside of North America.
    For what crazy reason did you purchase an iPhone in the US if you live in Greece?  If your phone needs servicing, it will have to be brought back to the US.  You cannot get that phone serviced in Greece.

  • You have no authorization for the requested data. Message no. UPC217

    Hi All,
    When i execute a BPS planning function i am getting the following error.
    'You have no authorization for the requested data. Message no. UPC217'
    Plz let me know how to rectify the problem asap.
    Thank you all in advance
    Kiran

    Hello,
    Your Function/level makes use of an authorization relevant InfoObject without restriction (or at least no restrictions enough).
    Check that the Level is restricted correctly regarding the authorizations.
    regards,

  • TS3694 I just received the unknown software error (6) do you have a resolution for this issue?  Occurred after install of software and firmware in the final validation phase. I have a 4S

    I just received the unknown software error (6) do you have a resolution for this issue?  Occurred after install of software and firmware in the final validation phase. I have a 4S

    http://lmgtfy.com/?q=iPhone+error+code+6

  • I would like to get certified for the SAP Crystal Reports. So, I would like to get some info about the currently available Certification Exams for Crystal Reports (2011/2013). Also, would greatly appreciate  if you have any suggestions for thi

    Hi,
            I would like to get certified for the SAP Crystal Reports. So, I would like to get some info about the currently available Certification Exams for Crystal Reports (2011/2013). Also, would greatly appreciate  if you have any suggestions for this Certification Exam preparation materials from another 3rd party or from SAP directly .  I would like to prepare or get trained well before taking the exam as I see it costs around $500.
    Thanks in advance for your help in this regard!
    Sincerely,
    J

    Please search here.. Training and Certification Shop for your desired certification or training. Don't forget to set your location.
    Please use some summarized title for your query.

  • No authorization for this transaction with movement type

    Hi gurus,
      My sd consultant is authorized to execute VLO2N Tcode. But it is giving the error as follows
      "No authorization for this transaction(vlo2n) with movement type 643" ...
    When i try to do the same thing through BASIS ,it gives no error..
    Thanks in Advance,
    Vaibhav Gore.

    Hi Vaibhav,
    T. Code PFCG --> Give particular Role Name then click Change Button -->
    Then Click Autherization Button --> then Click Change Autherisation(pencil)
    Go and Click or Drill down the Material Management : Inventry Management
    1.This is --> Goods Movement  : Storage Location Type :
       Click -->  Movement type (Inventry Management) Press F4 --> u can choose ur valid type
        Like -->  623        GI iss:cust.ret.pack
    Regards
    kesav

  • I have 9 Soundcloud widgets on my web page, none of them work. They use HTML 5 which works on Google Chrome and Internet explorer. Do you have a fix for this ?

    I have 9 Soundcloud widgets on my web page, none of them work. They use HTML 5 which works on Google Chrome and Internet explorer. Do you have a fix for this ? I am using Firefox V 20.0.1

    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Press and hold Shift and left-click the Reload button.
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • HT1926 My installation of Itunes to syne my iphone with PC was missing AppleApplicationSupport.msi  after 2 installs how can I install such a file do you have a path for this

    My installation of Itunes to syne my iphone with PC was missing AppleApplicationSupport.msi  after 2 installs how can I install such a file do you have a path for this

    Hi kensb!
    I would recommend that you attempt to reinstall all of the programs and components of iTunes on your machine and reinstall everything again. It can be tricky to get everything uninstalled, so we have an article that can help you make sure you uninstall everything:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/ht1925
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/ht1923
    Specifically, when it comes to uninstalling, you will want to uninstall applications in this order:
    Use the Control Panel to uninstall iTunes and related software components in the following order. Then, restart your computer.
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended effects.
    You will then want to follow the links in those articles to download the latest package of iTunes software for your computer and install again from there. Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

Maybe you are looking for

  • Asset Depreciation Write up ABZU

    Hi Guys, Our client has migrated the asset balances and unfortunately there was a depreciation run which made their balances out by few thousand dollars compare to their legacy system. Initially I have suggested ABZU (write up) bearing in mind that a

  • How to group...

    Hi guys, Here's what seems to be a rather easy question. How does one set several tracks up as a group? And once they are set up as a group, can you edit their individual parameters, with every track in the group responding to this one global edit? H

  • Acrobat Standard 7

    Can i flatten a pdf form with Acrobat Standard 7?

  • Installing a Adobe without a CD but with a product key

    I want to know how to install 9.0 (I upgraded from 8.0) on a new replacement OS on my computer.  I have lost the CD,  but have the prodcut key from my backup documents.  I already mistakenly installed my old Adobe 8.0 standard for the original CD.

  • HT1553 i bought a Gdrive to back up my MACbook Pro. How do I know it is working?

    I bought a G drive to back up my Mac Book Pro , how do I know it is working?