You must connect to Microsoft Exchange with your current profile before you can synchronize your folders with your outlook data file (.ost).... OWA works but outlook 2013 does not, exchange server 2013 on Server standard 2012

I have read a lot of articles and tried a lot of things, but I cannot get outlook to connect to my exchange server. This is a test environment, I have tried making my own certificate and signing it through my own CA to no avail. I have completely disabled
windows firewall and stopped the service. I can ping between the two just fine by name or IP. I've tried not using cached mode, creating new profiles in outlook etc. I tried setting my CertPrincipalName to my FQDN in exchange powershell.
I am not an expert with exchange at all, but I feel like this should work with little to no configuration, instead I've wasted days on this. Half of the articles I've read don't seem to have solutions, and the other half have solutions that are not working
for me.
I can access OWA and send emails on a client computer through OWA with no problems.
I am running a test domain on the same network as my current exchange 2003/sbs 2003 active environment, I don't know why this would be an issue, but if it is I cannot figure out why. The only thing I can see holding me back right now is not having a signed
certificate from digicert etc, and an official internet domain set up, but I don't think either of those things matter in my situation.
Any help is greatly appreciated and I'll gladly provide any other information requested to solve this issue, thank you.

I have a similar setup and also have the same error. Did you find a solution for this?
In the managed availability - monitoring log I see the following errors:
EMSMDB.Connect() step of ComplianceOutlookLogonToArchiveRpcCtpProbe/Mailbox Database 0326619395 has failed against BESRVCOTEXCH001 proxying to BESRVCOTEXCH001 for [email protected].
Latency: 00:01:58.0150000
ActivityContext:
Outline: [15] RpcProxy connectivity verification; [117999][FAILED!] EMSMDB.Connect();
Likely root cause: HighLatency
Details:
Error: Error 0x71a (The remote procedure call was cancelled) from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall RPC EEInfo is not enabled or there is no error on this thread.
Log: RpcProxy connectivity verification
Task produced output:
- TaskStarted = 8/5/2014 7:47:11 AM
- TaskFinished = 8/5/2014 7:47:11 AM
- ErrorDetails =
- Latency = 00:00:00.0153816
- RpcProxyUrl = https://besrvcotexch001.hq.corp.cotrain.lan/rpc/[email protected]:6001
- ResponseStatusCode = OK
- RequestedRpcProxyAuthenticationTypes = ntlm
- RespondingHttpServer = BESRVCOTEXCH001
- RespondingRpcProxyServer = BESRVCOTEXCH001
- WebHeaderCollection = Persistent-Auth: true
X-DiagInfo: BESRVCOTEXCH001
X-BEServer: BESRVCOTEXCH001
Content-Length: 20
Content-Type: application/rpc
Date: Tue, 05 Aug 2014 05:47:11 GMT
Server: Microsoft-IIS/8.0
X-Powered-By: ASP.NET
RpcProxy connectivity verification completed successfully.
Mailbox logon verification
EMSMDB.Connect()
Task produced output:
- TaskStarted = 8/5/2014 7:47:11 AM
- TaskFinished = 8/5/2014 7:49:09 AM
- Exc
and
EMSMDB.Connect() step of OutlookRpcCtpProbe/Mailbox Database 0326619395 has failed against BESRVCOTEXCH001 proxying to BESRVCOTEXCH001 for [email protected].
Latency: 00:01:58.0250000
ActivityContext:
Outline: [13] RpcProxy connectivity verification; [118011][FAILED!] EMSMDB.Connect();
Likely root cause: HighLatency
Details:
Error: Error 0x71a (The remote procedure call was cancelled) from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall RPC EEInfo is not enabled or there is no error on this thread.
Log: RpcProxy connectivity verification
Task produced output:
- TaskStarted = 8/5/2014 7:23:20 AM
- TaskFinished = 8/5/2014 7:23:20 AM
- ErrorDetails =
- Latency = 00:00:00.0132417
- RpcProxyUrl = https://besrvcotexch001.hq.corp.cotrain.lan/rpc/[email protected]:6001
- ResponseStatusCode = OK
- RequestedRpcProxyAuthenticationTypes = ntlm
- RespondingHttpServer = BESRVCOTEXCH001
- RespondingRpcProxyServer = BESRVCOTEXCH001
- WebHeaderCollection = Persistent-Auth: true
X-DiagInfo: BESRVCOTEXCH001
X-BEServer: BESRVCOTEXCH001
Content-Length: 20
Content-Type: application/rpc
Date: Tue, 05 Aug 2014 05:23:20 GMT
Server: Microsoft-IIS/8.0
X-Powered-By: ASP.NET
RpcProxy connectivity verification completed successfully.
Mailbox logon verification
EMSMDB.Connect()
Task produced output:
- TaskStarted = 8/5/2014 7:23:20 AM
- TaskFinished = 8/5/2014 7:25:18 AM
- Exc

Similar Messages

Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profil

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)
OK. This is a new outlook setup on a laptop. The mail account is on a MS Exchange Server 2010. The user can log on to their laptop no problem with their AD login and password. To setup the outlook profile we have checked the name OK. When we click finish
and try to start outlook we get the above error message. It is driving me pots as I have tried also of things. I have tried to connect without catching the files. The error message then says that the Exchange Server is down, yet we checked the name OK and
I can log on to the MS Exchange server and see the setup.
What else is it that I need to look at as I have tried everything. I will add that they one service I see not running is the Exchange RPC service. If I try to start it, it fails saying Some services stop automatically if they are not in use by other services
or programs.
What can I do?

The major cause of this problem is a corrupted Navigation Pane settings file – profilename.xml, where “profilename” is the name of your Outlook profile. A good sign that the
file is corrupted is when the size of the file is shown 0 KB. No one knows the precise reason why this takes place, but all versions of Outlook from 2003 to 2013 may get affected.
Other causes may be when you run Outlook in the compatibility mode, or if you are using a profile generated in an older Outlook version, or if the Outlook data file (.pst or .ost)
was removed or damaged as the result of faulty uninstallation or reinstallation of MS Outlook.
Follow the steps given below to resolve this problem
1. Recover Navigation Pane configuration file
2. Repair your Outlook PST file using Inbox Repair tool
3. Create a new Outlook profil and import data from the old PST file
4. Turn off Compatibility Mode
5. Start Outlook in Safe Mode
For more info, you can visit http://www.ablebits.com/office-addins-blog/2013/12/06/cannot-start-microsoft-outlook-solutions/

Exchange 2013 Issue - Cannot open default email folders. you must connect to microsoft exchange

Hello all, this is my first post and nightmare to this issue because i believe i made mistake and overlook something. I search over the internet i cant find the best answer or maybe i missed something during the configurations. The exchange was working fine
not after i change the setting following the method
Configure External and Internal URL in Exchange 2012. after that, the users outlook experiencing disconnect from exchange. I restore back the previous setting but now I cant add any new user to the any Outlook version or change the server path. it will
cause the problem which show the message below:
"Can't open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folder with your offline folders with your Outlook data file (.ost)"
I restarted the server and check all the Exchange services are running. The Outlook web is running and they able to receive and send out. The existing link to the exchange are still working so I not really sure what setting should i look into. I was thinking
about restoring back from Window Server Backup but was advise not to do it unless there are ways to look back the previous setting from the backup.
One of my ex-boss told me could be the Exchange Certificate but wasn't sure.
I really appreciate someone could advice and help me resolved this issue.
IT Tech Supports

Actually all are affected, but i manage to solved it running Virtual test version to trace the issue and finally able to fix it. Thanks for asking.
IT Technician

Cannot start Outlook 2013: "name cannot be resolved" / "connection to Microsoft Exchange is unavailable" / "___.ost is not an Outlook data file (.ost)"

My work e-mail has a double-login system, where my credentials for work access are one username and my e-mail is an alias of that first username, so they differ from one another. I suspect that's why I've been having the hardest time with Outlook 2013. I
was able to add my account just fine once but changed my mind about using Outlook and removed the account. Now I can't get back into Outlook for the life of me. The error messages that show up are:
1. It asks me to verify server and Mailbox. I've tried it with both usernames (the official work username and the e-mail alias) as my Mailbox info, followed by the email domain (even tried it without the domain) and it still won't verify when I click "Check
Name".
2. This message comes up: The name cannot be resolved. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
3. Then once I click "OK" another pop-up says: Cannot start Microsoft Outlook. The file C:\Users\FirstLastname\AppData\Local\Microsoft\Outlook\FirstLastname.ost is not an Outlook data file (.ost).
Help?

Hi,
As per this KB article, the issue might occurs when some required registry key does not exist on your computer.
Please try the steps mentioned in it and see if it is helpful to you:
http://support.microsoft.com/kb/2264398/en-us
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

I have a Iphone and I want to downloa a game but it's over 50MG or MB so it says you must connect to wifi or download from a computer so I downloaded it from the computer and the computer says the downloads done but the app bar is empty and says waiting..

I have a Iphone and I want to downloa a game but it's over 50MB so it says you must connect to wifi or download from a computer so I downloaded it from the computer and the computer says the downloads done but the app bar is empty and says "waiting.."

Need to Resume download to complete the ongoing Process.
Last Resort, put the iPhone in DFU mode (Google How to do that). Connect in iTunes. Follow on-screen prompts to Restore. All Data would be lost, if not backed up earlier.
To save the photographs you may have to use third party software. Google is your friend.

I'm having trouble recording a bass to go along with a recording I dropped into GB. I'm using an interface and I can hear the bass line, I've clicked on the 'record' button, but the sound does not record. What am I missing?

I have the bass connected to my imac with an interface.
I can hear the bass and I've clicked on the 'record' button, but the sound does not record.
Am I missing something ?
Please advise.
Mike

Double check all your audio settings.
System Preferences --> Sound --> Input should be set to your audio interface.
GB --> Preferences --> Audio/MIDI --> Input should be set to your audio interface.
With your track selected, open the Track Info pane, and select the Edit tab. Under input make sure that Mono 1 or 2 is selected (which number will depend on which input you plugged your bass cable into).

"Set of folders can not be opened. you must connect to microsoft exchange with current profile" geeting error while opening shared mailbox in outlook 2007

Hello Folks,
I am having exchange sever 2007 SP3. currently facing issue with one shared mailbox. One of the user is not able to open that mailbox from outlook 2010.
I can able to add that mailbox in the outlook but while opening the outlook it is asking for password. Outlook is not accepting user password for that mailbox. I have removed that user from full access and added that user again.
Other shared mailbox is working fine with same outlook profile and other user can also able to access that problematic shared mailbox.
Can anyone tell how to troubleshoot..?
Thanks, Chinmay.

Hi,
How do you open the shared mailbox in Outlook?
Please remove the shared mailbox from your Outlook totally and follow the following steps to open it:
1. Open Outlook, click File > Account Settings
> Account Settings.
2. Click Change and make sure Use Cached Exchange Mode is checked.
3. Click More Settings > Advanced tab.
4. Click Add next to Open these additional mailboxes and type the shared mailbox.
5. Click Ok > OK. Then the shared mailbox would be listed under the Navigation Pane.
Alternatively, we can create a new Outlook profile in Outlook and setup the shared mailbox. If it is asking for credentials, we can use the user account who have full access permission to the shared mailbox for authentication.
Regards,
Winnie Liang
TechNet Community Support

Owa working but outlook cant connecting to the new mailbox in Hosted exchange 2010 SP1

hi i recently join one organization they having Hosted Exchange 2010 Sp1 i created one new organization Unit and created
new MailBox but didnt give any permissions so when i try to connect to OWA then i log in and send and recive e-mails but when i try to connect to Outlook it say the name not found ...........
please help me

Hi sorry for so late respons i was on leaves .
new User not connected automatically getting the message "user name Not found " also when i try to connect manually the error message " there is problem with the security certificate. the name on the security certificate is invalid or does not match ..." also
Outlook some problem with some old Mailboxes
from Exerca i get the following errors i.e Certificate related
The Microsoft Connectivity Analyzer is attempting to test Autodiscover for [email protected].
Autodiscover was tested successfully.
Additional Details
Elapsed Time: 2927 ms.
Test Steps
Attempting each method of contacting the Autodiscover service.
The Autodiscover service was tested successfully.
Attempting to test potential Autodiscover URL https://xyz.co.uk/AutoDiscover/AutoDiscover.xml
Testing of this potential Autodiscover URL failed.
Additional Details
Elapsed Time: 417 ms.
Test Steps
Attempting to resolve the host name xyz.co.uk in DNS.
The host name resolved successfully.
Additional Details
Testing TCP port 443 on host xyz.co.uk to ensure it's listening and open.
The port was opened successfully.
Additional Details
Testing the SSL certificate to make sure it's valid.
The SSL certificate failed one or more certificate validation checks.
Additional Details
Test Steps
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server xyz.co.uk on port 443.
The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
Additional Details
Validating the certificate name.
Certificate name validation failed.
Tell me more about this issue and how to resolve it
Additional Details
Attempting to test potential Autodiscover URL https://autodiscover.xyz.co.uk/AutoDiscover/AutoDiscover.xml
Testing of this potential Autodiscover URL failed.
Additional Details
Test Steps
Attempting to resolve the host name autodiscover.xyz.co.uk in DNS.
The host name resolved successfully.
Additional Details
Testing TCP port 443 on host autodiscover.xyz.co.uk to ensure it's listening and open.
The port was opened successfully.
Additional Details
Testing the SSL certificate to make sure it's valid.
The SSL certificate failed one or more certificate validation checks.
Additional Details
Elapsed Time: 270 ms.
Test Steps
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover.xyz.co.uk on port 443.
The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
Additional Details
Validating the certificate name.
Certificate name validation failed.
Tell me more about this issue and how to resolve it
Additional Details
Attempting to contact the Autodiscover service using the HTTP redirect method.
The Autodiscover service was successfully contacted using the HTTP redirect method.
.......................... Please help me how to resolve

HT4009 I purchased the postcode search for Navigon, but now it just keeps telling me: "You can't purchase This item With This Account, You must purchase the app that this item is for before you can purchase the item". I PURCHASED NAVIGON 2 YEARS AGO!

As said, I already purchased Navigon when it first came out. Since Garmin took over this app is worthless. Not only have I lost all my settings, but none of my in-App purchases work and I can't even enable them because my iPhone tells me I need to purchase the App.
I've already tried the following:
Shutting down the App and restarting
Rebooting my phone (hard and soft)
Deleting and Reinstalling the app
Resetting my iPhone
purchasing the InApp Purchase
I'm at a loss what to do and for some reason I can't seem to find anywhere to get support on this from the itunes store.
Anyone got any ideas?

No, I had a similar issue before, but from looking on iTunes reviews, I'm not the only one experiencing this.
I was hoping someone on here would have had similar experience and have some advice on what to do next.

K Connect to server works, but Windows SHARED does not show in Finder

I hope this helps others:
My network has one Leopard and two Windows XP's, one of which would always show up within approximately 5 minutes in the Finder right column under SHARED, but the other never would. Both were accessible if I performed an K to smb://<ip address>. I finally found the difference and now both appear in SHARED.
On the Windows machine goto ControlPanel>NetworkConnections and right click for Properties on the connection being used in the network. In the Properties dialog select the Properties button for the 'Internet Protocol(TCP/IP)' line item. In the TCP/IP Properties under the General tab select 'Advanced' at the bottom of the dialog panel. Then select the WINS tab. Uncheck 'Enable LMHOSTS lookup' (this may have an adverse effect if your network relies on it) and check 'Enable NetBIOS over TCP/IP'. If 'Default' is checked sharing worked fine between the Windows systems, but Leopard never listed the SHARED in Finder.
After making the change I restarted Windows and Leopard, and the Shares were finally listed in Finder.

I found that the WINS error was because /etc/smb.conf includes /var/db/smb.conf which has a 'wins support = no' line in it.
I also found that if I prevent Leopard from becoming the local master, Windows shares always appear in Finder within 5 minutes of the PC coming onto the network. To accomplish this I added the following to /etc/smb.conf:
os level = 0
local master = no
Note, the default smb.conf sets 'os level = 2'.
This from the Samba doc explains the 5 minutes:
+It is possible to configure two Samba servers to attempt to become the DMB for a domain. The first server that comes up will be the DMB. All other Samba servers will attempt to become the DMB every *5 minutes*. They will find that another Samba server is already the DMB and will fail. This provides automatic redundancy should the current DMB fail. The network bandwidth overhead of browser elections is relatively small, requiring approximately four UDP packets per machine per election. The maximum size of a UDP packet is 576 bytes.+
Message was edited by: xnav

Connected monitor works, but the comp. does not "see" it

ello,
When i plug in a monitor it will clone the display, but system prefs only shows the laptop LCD

Hello, I believe that is the case when the Display is "Mirrored"... how else could it be? You can't change the Rez or Depth of one without the other, can't drag the MenyBar/Dock to the other one!
If they are Extended Displays, they do show up as separate ones.
They're essentially one Monitor when Mirrored.

My itunes says 'you must connect to wifi network or download on your computer' when i am already on my computer and connected to internet?!

I am trying to rent some movies in the iTunes store but regardless of what account I use it keeps popping up with the message of: "This iteam cannot be downloaded on this network, you must connect to a wifi network or download it on your computer"
My computer is already online, I am able to access the iTunes store, just not download! Please help!!!

I had the same issue....seems to be fixed...see this:
http://thenextweb.com/apple/2012/03/23/apple-acknowledges-item-cannot-be-downloa ded-errors-due-to-itunes-cloud-issue-no-eta-on-fix/

This item is over 20MB. You must connect to a wifi network or use iTunes on your computer to download it.

Verizon wireless network - unlimited data plan.
iPhone 4 - iOS 5.0
"This item Is Over 20MB
You must connect to a Wi-Fi
network or use iTunes on your
computer to download it."
This message was given when trying to update an app I already had installed on the phone. My question is why? Is this a problem with the programming making you connect to the internet via link or Wi-Fi. Or is this a limitation on the Verizon network? Or perhaps a limitation set in place by Apple to prevent long downloads? So I came here hoping to get some hard cold facts. (since Verizon associates would not or simply could not help me)
Personally I could care less if it took 6 hours to download an update. I do however have a problem paying a telephone service an insane rate to get "unlimited data" and not being able to receive unlimited data.
Any help would be greatly appreciated.
-Luna

Telstra Australa
I dont have Wifi in the countryside and theres no DSL, only 3G and 4G. why should I have to buy another 3G service when I already have one? This is one of the problems of globalisation, because AT&T cant handle the volume, the whole world has to suffer.
I pay per gigabyte, so dont need these restrictions Apple! Its mine to use.
Daniel.

HT1390 trying to rent a movie and error message pops up saying "item cannot be downloaded on this network. You must connect to wi-fi or download it on your computer". I just finished downloading a rental but I get this message when attempting another. Any

trying to rent a movie and error message pops up saying "item cannot be downloaded on this network. You must connect to wi-fi or download it on your computer". I just finished downloading a rental but I get this message when attempting another. Any help much appreciated

You might want to try it again. It started working for me about 10 minutes ago (~8pm CST).
This was happening for rentals and purchases.

You must connect to Microsoft Exchange with your current profile before you can synchronize your folders with your outlook data file (.ost).... OWA works but outlook 2013 does not, exchange server 2013 on Server standard 2012

Similar Messages

Maybe you are looking for