You won't let me export bookmarks to html you say I'm not the administrator but I am
I am interested in dual booting to Linux. However I need to export my bookmarks. I've always been able to export my bookmarks to an html but now you say I Can't because I'm not the administrator?! I am the only user and run as administrator. This doesn't make sense.
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.
Similar Messages
-
My iTunes won't let me connect my iPhone because it says I need an updated iTunes, but when I try to download the new iTunes, it says that my Mac software (10.5.8) is too old. However, there are no software updates available. What can I do?
It depends on what iPhone you have.
If it's an iPhone 4S or earlier, click here.
If it's an iPhone 5, you need to buy a Mac OS X 10.6 DVD, and that requires an Intel Mac with at least 1GB RAM.
(73384) -
So basically I took my iPhone in to be fixed. It's got a problem where the wifi won't switch on nor will my Bluetooth. Knowing I only brought a new iPhone about 4 months ago thought that's ok I'll get it fixed or a new one.
How wrong was I? Not only were they rude to me and talked down the me. They also completely wiped my phone convincing me it would fix the problem. Well it didn't. I actually left the store crying as I had no contacts, photos, or apps.
They refused to help me any further without me buying a new phone. They said that when I got my new phone from them to replace another broken headset I only got 90 days warranty. They said I signed for it. In my opinion they should make it clearer and tell you this.
I am disgusted at the way I've been treated and think that for such a big company they really don't help themselves.
Just wondering if anyone could help shed some light on this?OK. So the phone you took them was an out of warranty replacement for a phone you had previously... Is that correct? They told you the truth. The out of warranty replacement has a 90 day warranty. (if the phone it was replacing was physically damaged, the OOW replacement will inherit the balance of the original warranty if it's longer than 90 days.)
If you were backing up and syncing your phone on a regular basis, as intended, you can restore all of your information exactly the way it was at the time of the last backup.
If you're unhappy with the way you were treated, go back and speak to the manager or call Apple and ask to speak to customer relations.
No one here can do anything. This is a user forum. -
Help - i recently made put together a high quality movie for a relative, it has taken me months to complete and it goes for a total of 9 hours and 43 minutes ,however, it won't let me export the video at all! please help - its taken ages to make it!
9 hours??!
Twice the length of a cinema epic?
How are you expecting to distribute it?
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US -
IMovie won't let me export in HD
I imported an MP4 into iMovie, set the project preference to 16:9 and it still won't let me export the movie in anything but the "tiny and mobile" options. The "medium, large and HD" options are greyed out.
What could be the problem? thanksAfter hours of searching through forums I have found the solution to our problem.
iPhone 4s video is automatically shot in HD. There is no way to turn this off.
In iMovie Version 9.0.4 iLife '11 you can set your project properties (File>Project Properties) to either either 16:9 widescreen or 4:3 standard.
Now HD is specifically widescreen and you can not create HD video in a 4:3 screen ratio. This is what my project was set to after spending over 16 hours working.
Once I change the ratio I was able to share and export my project in 720P and 1080P HD
You will have to tweak your project a little as when I went from 4:3 to 16:9 it cropped some of my video weird.
I hope this helped you as I am thoroughly relieved to have figured this out and slightly proud that I did it on my own. -
Premiere Elements 9 Won't Let Me Export Video. What's Wrong?
So I have been trying to edit a recent Let's Play video for my Youtube channel, but there is a huge problem. The program won't let me export my video. I tried to export it as a .mpg; but it will never finish rendering. I've tried other formats and the same thing happens. I tried making a new project file and the same thing happened. It will usually get to 1% or 47% and then the estimated time will start increasing and the video won't save any further. I've edited videos with these type of files before (.M2TS, .MP4, .WAV, & .PNG) and it has rendered just fine. Please help me because I have people who are asking for this video. My computer runs Windows 7 Professional and has 2GB of RAM.
You've got a couple of issues to be concerned with, Cwood.
First -- are you really running a Windows 7 Professional computer with 2 gig of RAM! If so, it's surprising you can even run Premiere Elements. I highly recommend you upgrade to 4 gigs of RAM at the minimum -- and, if your OS is Windows 7 64-bit, possibly 6 or 8 gigs. RAM is your computer's lungs. Without adequate RAM, your computer can barely breathe!
Also, make sure that you have adequate free space on your hard drive (I'd recommend at least 100 gigs) and that you have run Disk Cleanup and the Defragmenter so that Premiere Elements has adequate free space to use for temp and render files.
Second, editing video from recording software like Let's Play can have a number of inherent problems. What format is Let's Play recording your video as? If you open the video file in Media Info or G Spot, what frame rate, resolution and codec is displayed?
Finally, I would very much recommend AGAINST using an MPEG output for your YouTube output. MPEGs, like DV-AVIs, are interlaced videos, and they are really not going to look good at all when you post them online?
Have you tried using Premiere Elements 9's Share/Online/YouTube to output your video? -
Hello!
My iMovie won't let me export in HD (1080p or 720p), which has proved to be very frustrating.
It first starts exporting:
but then after a few minutes, a message comes up:
What do I do? I've spent ages on this video, and it's really irritating, for me to start it all over again! I've updated all of my software, checked the App store for updates for iMovie, but there's nothing! What do I do???? GAH!!
Please help! Thanks in advance! Thank you!I have the same problem and then some. I movie won't share this particular project, but it also won't save any changes made to it or any other project. At least that's what it started doing, now when I go to even try to make any changes it wigs out and things get scrambled in the Project window and it plays video from another project.
When I create a new project, the Share menu is available, but it won't save changes to that project either. And by that I mean I can put stuff in the project and do whatever, but as soon as I quit and relaunch the application, the project is empty. I did figure out that if I make changes in a new project and immediately share it to the media browser that it will save the changes, but then it messes up my other project even more somehow!
Tried archive and install, deleting plists, reinstalling iMovie and iLife support stuff (twice), repairing permissions, and changing permissions in the project package. Any other ideas? -
I have a iPad 2 I brought it yesterday and it has an update for iOS 6.1 but it won't let me download it. It keeps saying your no longer connected to the Internet but I'm connected to my wifi. Can you help please
Hi Blueandpink,
If you are running iOS 4, you will need to update the iPad via iTunes on your computer (can't do OTA updates unless you have iOS 5 or higher).
If you have a first generation iPad, unfortunately you won't be able to update to iOS 6 (iOS 5 is the highest you can update to on the original iPad).
If you are on an iPad 2, 3, or 4th generation with iOS 5 and it still isn't working, try holding down on both the Sleep AND Home buttons at the same time for about 10-15 seconds (ignore the red slider button). Keep holding it until the Apple Logo appears. When you see the Apple logo on the black screen, let go of the buttons. This “reset” fixes a lot of iPad issues and might work to resolve the update issue. Try updating again.
Hope this helps!
~Joe -
Final Cut Pro X won't let me export because I worked from an SD card
Hello,
I made the stupid mistake of editing my project from an SD card and now FCPX won't let me export it. I have since exported the original files onto my hard drive and I attempted to relink the files in the project folder but no luck. The option to relink files opens a dialogue box but the computer can't seem to find the files and the option to manually locate the files is greyed out. This is a time sensitive issue and if I can't solve the problem I will have to stay up all night to complete the project again. The video files are AVCHD, does this have something to do with it? I am not very tech savvy so I have no idea what to do. Help??TTry the reimport from camera function to import from the card.
-
Deauthorizing iTunes on a computer? My laptop won't let me connect my iPhone because it says I'm authorized on too many computers, but when I try to de-authorize another computer I use it won't let me. What's up?
What do you mean it won't let you? What exactly does it say? (Sorry to sound so exasperated but this is like the 6th post in a row where people have made vague statements which do little to help us find solutions without a game of 20 questions.) I'm going to guess and say you can only deauthorize a computer to which you have physical access or VPN login. The alternative is to deauthorize all which you can only do once a year.
-
I have Maverick 10.9.1 installed I scanned a photo on my HP D 110 series but it won't let me print or save it: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.
Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software -
I recently did a full restore to iPhone4 but I can't turn on my iCloud. It won't let me enter my correct Apple account username, keeps defaulting to the old invalid username. Please help!
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
You'll need to use the instructions in the link above to put it in recovery mode. -
I downloaded the OS X on my air and I can't use my keyboard and it won't let me restart my computer because it says that the application assistant canceled the shut down, I don't know what to do
When all else fails (it sounds like it has) hold the power button for about 10 seconds. This shuts down the computer. Then tap it to restart. Since it sounds like the OS upgrade began but then failed to perform a restart you may find that the Install Mavericks file is still in the Applications folder and you can try again. Or you might find that you have to redownload. I don't think the installation is going to proceed as if the computer had successfully restarted but I could be wrong (and in this case gladly so for your sake.)
-
since I did the update to OS5 I can't update any apps on my iphone4 and also had to make a new account before it would do the update. now it won't let me sign in to my original itunes and tells me the password is wrong and I know it isn't.
I having same problem is there a solution ?
-
I'm trying to update to the latest software update 5.0, but won't let me do it. I have done a restore and tried again but still no luck. Any advice?
The Original update for Apple TV was to 4.4 then a bugfix appeared called 4.4.1 Both of these have issues so Apple Pulled them and currently 4.3 is the current version for Apple TV IOS. In fact there are a number of comments in other threads where people carried out the upgrades only to restore back down to 4.3 because they did not work. Guess we will wait for Apple to send out an update.
Maybe you are looking for
-
What do I do at firefox to get it to work with proxy Real-Hide-IP
I tried to get an answer at Real-Hide-IP a VPN that changes IP with the click of a button. Each click toggles between your real IP and a fake IP. They were impossible to deal with. I hope you can help me. It seems to me I have to do set some conditio
-
Anyone ever had an error 532 on their curve? what does this mean and how do i fix it?
-
Search in "forms" and other important features in iOs Numbers
Hi, this Numbers is very great!! But there are 3 important features to add in "forms". 1. It's really important the possibility to search in a "form" and not only in spreadsheet. I don't know why they don't add this feature.... 2. The possibility to
-
Thank you for all your recent help with this project I am now taking a different approch with the visuals just a little extra to go with th enew fuctionality. I have just added the code from the update content sample this work fine but only on the fi
-
How to save groups-tabs for next time use?
I make some groups-tab by function of sites , like Email-group, News –group. If close FF beta 9, and option of startup is "show a blank page " or "show my home page", these groups were not be saved. If startup is "show my windows and tabs from last t