Your  questions are N/A for my lifestyle, I am retired, I was in the medical field for 30 + years

I am retired and have been for many years.  I was in the medical field for over 30 years.   My message is:  Why is Adobe so costly?  When I had my other laptop and my first desktop computer, it was free.    Now it is almost $200.   That is my question and concern.    The trial edition will not download on my  Hp Pavillioin series g laptop........It is a ffarce I think

Since your question and concern is the cost of the software, the software was never free and has always been expensive.  If the software came with your computer the software cost was included with it.

Similar Messages

  • Thanks for responding to my question. The annwer for your questions are: Measurment time : 300seconds, Sampling Frequency : 2 Hertz, and Window Type : Hanning. Hope you could hint me on this soon.

    Thanks for responding to my question. The annwer for your questions are: Measurment time : 300seconds, Sampling Frequency : 2 Hertz, and Window Type : Hanning. Hope you could hint me on this soon.

    ok, I see you posted parts of your VI in a different location. There is a sub-VI missing though ( Spline Interpolate.vi). But I re-constructed your data and can see the following things:
    1 - Your signal has a significant DC-offset (approximatelly 1000) and this will result in a power value for DC of approximatelly 10E6 (though you wrote 10E8 in your first posting).
    2 - If you ignore that DC, you can see on the time signal that there is another signal at very low frequency (order of magnitude amplitude = 10, power spectrum around bin 1 = 100) and you are not capturing an entire period of that signal, so either a measurement time of 300 seconds is not enough or this is a signal caused by a drift that you want to ignore.
    But overall there is not much sign
    al left once you remove your DC and eventually the very low frequency signal. But given your input signal, the power spectrum looks right. Remember also that the DC component will be replicated (with 6 dB reduction) on bin 1 when you apply a Hanning window. Try eventually without the Hanning window (but you'll still have to ignore your DC bin). Alternatively subtract the dc value from your time signal before computing your power spectrum.

  • JustAnswer has asked me to answer your question -- "Apple TV: how to reset WiFi password. I do not recall the" -- because it falls within my area of expertise. I just need a few more details about your situation and I will get to work!

    JustAnswer has asked me to answer your question -- "Apple TV: how to reset WiFi password. I do not recall the original PW am hitting a brickwall and I am ready to jump off!  Please advise- many thanks

    1)Your going to have to go to the manufacture's website for the orginal password. Once you have that you will have to setup you network again.
    2)After your network is setup again you will go to general setting menu on the ATV. Select the Network option then Configure Wifi option. It will take a momment and load all the WIFI networks in you area.  Once you selected your network, it will prompt you to enter the password.

  • HT5622 Good day to advise you that I forgot security questions, email your questions to re-password security has been compromised by some persons illegitimate since the change

    Good day to advise you that I forgot security questions, email your questions to re-password security has been compromised by some persons illegitimate since the change.
    <E-mail Edited by Host>

    Apple does not respond here.  Do not put email addresses in posts here.  The world will see it.

  • Needed: Script to copy Photo album name into the comments field for pix

    I was never in the habit of applying anything to photo comments, but gave my albums a desriptive name so I knew what they were. Now I wish I had because album titles are not searchable. I'm wondering if anyone knows how to create an Automator workflow or Applescript that could take the Album Name and apply it to the comments field for each picture in the album. I have over 25,000 pictures and quite a few albums. I've started to do it manually for each album but would love to find a quicker way to accomplish this.
    Thanks.

    This should do the trick for you:
    click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">tell application "iPhoto"
    set theAlbums to (every album)
    repeat with thisAlbum in theAlbums
    set thisAlbumName to the name of thisAlbum
    set thePhotos to (every photo of thisAlbum)
    repeat with thisPhoto in thePhotos
    set comment of thisPhoto to thisAlbumName
    end repeat
    end repeat
    end tell</pre>
    FYI, it will step through every album; get its name; and then step through every photo in the album and change the comments to the album's name.
    I recommend that you make a back-up before proceeding!

  • I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

    I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

    You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

  • How can I know the delta field for CO-PA datasource?

    Hi,folks:
        How can I know which is the field assigned as the delta field for CO-PA datasource,as is noticed in the note that after PI2004 the logic has been turned to general datasource,but I can't find the datasource through RSO2.
        Full points will be given to u.
    Martin Xie

    Dear Martin,
    The CO-PA DataSources generated use a separate time stamp method for the delta procedure. This procedure means that client-independent DataSources in CO-PA are normally restricted to the clients in which they were generated.
    See this link...
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/97/6f4d40cef71059e10000000a155106/frameset.htm
    Also check ROOSOURCE in R3, asmentioned by Dinesh.
    Hope it helps.

  • How to use the manually entered Hours/Days in the Duration field for BG_ABSENCE_DURATION

    Hi All,
    How to use the manually entered Hours/Days in the Duration field for BG_ABSENCE_DURATION fast formula?
    Requirement is to restrict employees for applying for leave more than the accrued balance. In SSHR, apply leave functionality, the employee enters the start date, end date and duration manually. The entered duration must be used in the fast formula to check against available balance.
    In the BG_ABSENCE_DURATION FF, I have a function to calculate the net accrual balance as on the calculation date.
    I want to add the logic as - If to_number(Duration) /*[manually entered value]*/ > net accrual balance then
    Duration = 'FAILED'
    invalid_msg = 'Error'
    return duration, invalid_msg
    Thanks!

    Hi,
    We have a standard functionality to override the duration calculation and you don't need to add a validation for the same. Please set the value of profile option HR: Absence Duration Auto Overwrite to Yes
    When you do this user will not have to enter the duration value manually. It will get auto calculated based on the duration calculation in BG_ABSENCE_DURATION when you click on the next button.
    For not allowing negative leaves to be applied, If you are on R12 then, this is a standard functionality and you need to set profile option HR Allow Absence Negative Balance to No
    If you are on 11i then refer Note: 268171.1: How Do You Stop Accrual Plans from Going Negative?
    Try and let me know in case you need further help.
    Thanks,
    Sanjay

  • Customer no to populate the Assignment field for Sales A/c using sort key

    Dear All,
    In 6.0, I am trying to get the Customer number to populate the Assignment field for Sales Account
    We have set the sales account to a 031 sort key - sort by customer, in FS00. When 031 is set, SAP goes to the BSEG table and looks at the KUNNR (customer) field and populates the Assignment field with what is in the KUNNR field of BSEG.
    The problem is: the customer number (KUNNR) does not contain any data in BSEG.
    The KUNNR field of all the other account lines for the document number are blank.
    Is it possible to bring the field in the General Ledger display?
    Does anyone know of a user exit or other solution?
    Thanks,
    Gov

    Hi,
    Check with SD consultant and use Copy control.

  • How to upload the data for the z fields for the delta upload

    Hi Exports,
    I have the Z fields for the data sourse 2LIS_05_Q0ITEM. when doing any changes in the R3 system,the changes for the Zfileds are not uploded through delta upload.
    Anybody plese suggest me to upload the changes.
    Thanks,
    Krishna

    Hi krishna,
    see....have u activated that DATA SOURCE or not? if not activate that DATA SOURCE and have u written any code to that Zfields in RSAP0001?
    Regards
    chandra sekhar
    Edited by: chandra  sekhar on Nov 11, 2008 12:47 PM

  • I have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

    i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

    You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

  • Error - iTunes Library .iti file is locked on a disk or you do not have permission for this file. I can open itunes in the compatibility mode for Windows XP Service Pack 3 ???

    In Windows 8 I received the error iTunes Library .iti file is locked on a disk or you do not have permission for this file. I can open itunes in the compatibility mode for Windows XP Service Pack 3.
    I've tried changing permissions and sharing - nothing seems to work. mat be a Windows 8 issue???

    You also need to make sure you have both read and write permission for the file, or for the whole iTunes folder for that matter.  That's also done in Get Info for the file or folder concerned.
    Read the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914

  • Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST

    hi all ,
    Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST
    what all data i need to give to post a document.
    Thanks and Regards
    JK

    Hi...
    part of my source code:
    ** Header Data " Sending comp code
    wa_documentheader-comp_code = 'XXXXX'.
    wa_documentheader-doc_date = '20060620'.
    wa_documentheader-pstng_date = '20060620'.
    wa_documentheader-doc_type = 'XX'.
    wa_documentheader-username = sy-uname.
    wa_documentheader-ref_doc_no = 'XXxxxxxx'.
    wa_documentheader-header_txt = 'Text Header.
    wa_documentheader-bus_act = 'XXXX'.
    *it_currencyamount
    wa_currencyamount-itemno_acc = '1'.
    wa_currencyamount-currency = 'COP'.
    wa_currencyamount-amt_doccur  = 1943.
    APPEND wa_currencyamount TO it_currencyamount.
    *it_accountpayable
    wa_accountpayable-itemno_acc = '1'.
    wa_accountpayable-gl_account = '1234567890'.
    wa_accountpayable-bus_area = 'DIV'.
    wa_accountpayable-item_text = 'Text 1 XXxxxxx '.
    wa_accountpayable-pmnt_block = ''.
    APPEND wa_accountpayable TO it_accountpayable.
    *it_accountgl
    wa_accountgl-itemno_acc = '2'.
    wa_accountgl-gl_account = '1234567890'.
    wa_accountgl-item_text = 'Text 2 XXxxxxx'.
    wa_accountgl-bus_area = 'DIV'.
    APPEND wa_accountgl TO it_accountgl.
    wa_currencyamount-itemno_acc = '2'.
    wa_currencyamount-currency = 'COP'.
    wa_currencyamount-amt_doccur  = ( 1943 ) * -1.
    APPEND wa_currencyamount TO it_currencyamount.
    CALL FUNCTION 'BAPI_ACC_DOCUMENT_CHECK'
      EXPORTING
        documentheader = wa_documentheader
      TABLES
        accountgl      = it_accountgl
        accountpayable = it_accountpayable
        currencyamount = it_currencyamount
        return         = it_return.
    clear it_return.
    CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
          EXPORTING
            documentheader = wa_documentheader
          TABLES
            return         = it_return
            currencyamount = it_currencyamount "currencyamount
            accountpayable = it_accountpayable "accountpayable
            accountgl      = it_accountgl "accountgl
          EXCEPTIONS
            OTHERS         = 01.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.

  • Last night i was downloading the new update for the Iphone, and after the download was done and trying to install, it errored out.  And now my phone is stuck on the screen with the itunes icon and the USB.

    Last night i was downloading the new update for the Iphone4 on my laptop through Itunes.  After the download was done, it was starting to install, and then an error came up and didnt get a chance to check it.  Now my Iphone is stuck on the screen with the USB pointing to the Itunes Icon and wont do anything else.  Any advice on how to get this fixed, or do i need to go to the Apple store and have them look at it.

    slawdog31 wrote:
    Is the sleep wake button at bottom center of the Iphone or on top?
    Top
    iPhone User Guide

  • My osx version is 10.8.2. i was buying the facetime app for my mac. i got this error -"FaceTime can't be installed on "Macintosh HD" because the version of OS X is too new." so please help me out of this funny situation.

    my osx version is 10.8.2. i was buying the facetime app for my mac. i got this error -"FaceTime can’t be installed on “Macintosh HD” because the version of OS X is too new." so please help me out of this funny situation.

    https://www.apple.com/support/mac-apps/facetime/

Maybe you are looking for