Z10 STL100-1 Date and Time gets reset

My Z10 STl100-1 has a strange issue...
Time and date gets reset if I Switch off or Restart the Device,
I have the latest OS (10.2.1.3247) and also tried Factory Reset.. But still the Probelms Repeating...
Someone Tell me wat can be done???

I have the same problem... any solution? I am not synchronized with automatic network settings. I have to set date and time whenever I turn off or restart my Z10.
maheshahb wrote:
My Z10 STl100-1 has a strange issue...
Time and date gets reset if I Switch off or Restart the Device,
I have the latest OS (10.2.1.3247) and also tried Factory Reset.. But still the Probelms Repeating...
Someone Tell me wat can be done???

Similar Messages

Date and time reset when batery is empty

the date and time reset to initial state when the battery is empty, what should i do, thanx

Moy666 wrote:
Hi TJK, Thanx for answering,
My MBP have already a three months bought, what i should do, call to apple or to dealer?
I supposed its in warranty yet. THX
Your MBP has a one year hardware warranty on it.
As Trey suggested, it wouldn't hurt to try an SMC reset. If that doesn't work, you definitely want to contact AppleCare so you get it taken care of under warranty.

Screen keeps saying Setting date and time, tried to reset and or restart still won't reset

Screen keeps saying Setting date and time, tried to restart and reset but does not work,did follow direstions unplugging apple TV still not resetting/restarting, any help?

Aha! A bit more searching and I found the answer that just fixed it for me.
Press Menu and the Back arrow at the same time until a broken chain icon appears on the top left of the screen.
Let them go....
Press Menu and Right arrow (forward arrow) until a "fixed" or "whole" chain appears.
This enabled my apple tv to once again respond and get off the "setting time and date" screen.
Hope it works for you.

How can I get rid of the dates and time on my Notes

How do I get rid of the dates and times on my Notes that appeared when I updated to 8?

Yes, it's seems like a poor design decision.
By putting the date on the line below the Note title in the Notes Index, the app shows half the number of notes per page AND if you have a large number of notes, it takes twice as long to stroll down.
I doubt the designer actually uses the app.
TSAW

How to get the most current file based on date and time stamp using SSIS?

Hello,
Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
Thanks
thx regards dinesh vv

hi simon
i excuted this script it is giving error..
   Microsoft SQL Server Integration Services Script Task
   Write scripts using Microsoft Visual C# 2008.
   The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
    [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
    public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
        #region VSTA generated code
        enum ScriptResults
            Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
            Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
        #endregion
       The execution engine calls this method when the task executes.
       To access the object model, use the Dts property. Connections, variables, events,
       and logging features are available as members of the Dts property as shown in the following examples.
       To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
       To post a log entry, call Dts.Log("This is my log text", 999, null);
       To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
       To use the connections collection use something like the following:
       ConnectionManager cm = Dts.Connections.Add("OLEDB");
       cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
       Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
       To open Help, press F1.
        public void Main()
            string file = Dts.Variables["User::FolderName"].Value.ToString();
            string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
            System.IO.FileInfo finf;
            DateTime currentDate = new DateTime();
            string lastFile = string.Empty;
            foreach (string f in files)
                finf = new System.IO.FileInfo(f);
                if (finf.CreationTime >= currentDate)
                    currentDate = finf.CreationTime;
                    lastFile = f;
            Dts.Variables["User::LastFile"].Value = lastFile;
            Dts.TaskResult = (int)ScriptResults.Success;
thx regards dinesh vv

How do I get date and time component from a DATE object?

Hi All,
I need to get date and time separately from a DATE object, does
anyone know what function I should call? GetDate()? GetTime()?
I need this in a SELECT statement.
Thanks in advance and looking forward to your early reply.
Regards.
Gladywin
30/11/2001

Hello,
See following SQL.
select to_char(sysdate,'dd/mm/rrrr') today_date,
to_char(sysdate,'hh24:mi') now_time
from dual
Adi

Getting Date and Time to Show in the Menu Bar

I have the OS setup to set the date and time automatically and the clock set to "show date and time in the Menu Bar. I have the international set up for the Day of Week, Month, Date and Year, but the menu bar only shows "Fri X:XX:XX PM" is there any way to get it to show me Fri May XX, 2008 X:XX:XX PM"?
Thanks for any help.
John

I use iClock too. It is much more customizable than the Time & Date clock provided with the system. I have used it for several years and it has been very stable for a third-party application.
Although I have only used it for a couple of months, I also really like another third-party application you may like, to put weather conditions on the menubar called WeatherDock (freeware). It accesses Weather.com to provide the current temperature (of course) but it can include several other weather conditions (depending on how much space you have on your menubar). In addition to temperature, I have it show the weather condition (currently partly cloudy, typical in Houston), wind direction and speed (I ride a bike to the office and this tells me if I’ll be fighting it or aided), and humidity (also a Houston favorite). It will also speak the weather conditions when they change.

Get date AND time to show in the menu bar

What is that technique to get date AND time to show in the menu bar please?

Install iStat Menu
System Preferences -> iStat Menus -> Date & Time
\[X] Show Date & Time
Format .... \[Edit]
(*) Custom (drag tokens to build a custom format)
Drag a light blue token into the edit line below the token selections. If you want a space a colon a dash, etc... just type that character(s) before after draging a token into place.
I created: 9:35 PM Sat 1-Aug-2009
You can create anything you like in any order you like.
The other alternative (if you happen to be a fan of the Unix strftime() function) would be to use the % formatting characters in the Expert time format expression box. Use the Terminal "man strftime" to find out all the available % formatting codes.
But I think the Custom Drag & Drop section is the easiest to use.
However, if this doesn't work for you, then I guess it is just a case of "Your Mileage May Vary".

My iMessage for my Macbook Air is not working. It says no delivered with a red ! next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time. I have done about everythin

My iMessage for my Macbook Air is not working. I have updated everything. My system is running on OS X Yosemite Version 10.10. When I go to send a message, it says no delivered with a next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time and updating FlashPlayer. I have done about everything I can think of. Any help would be greatly appreciate!

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

How to get last modified date and time of a file which is in apache server.

Hi ,
I need to get last modified date and time of a file in remote machine.
This file is in remote machine which has apache server installed.
I am trying to get this information by connecting to apache server from client by giving absolute URI of the file to file object.
URI is got from apache server URL by using toURI method.
when I use lastModified method , its throwing exception , because scheme of URI is not file.
I can't give scheme as file because ftp server is not installed on that server
Is there any other way to get this information .

No, unless you can use an FTP client.

How to get the current data and time of SCOM server via SCOM SDK (API) calls?

Hi,
I need to read the current date and time of SCOM server via SOM SDK.
Is there a class in SDK that provides this info ?
Thanks,
satheesh

To get time and date of Alerts of SCOM, You can use following command let "get-scomalert"
Also, You can refer below links
http://blog.tyang.org/2013/02/21/using-scom-2012-sdk-to-retrieve-resource-pools-information/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical

Get-Hotfix InstalledOn property not returning hotfix installed Date and Time on Windows Server 2008 SP2 but works on Windows Server 2008 R2 SP1

Hi,
I am working on a validation script to get the list of hotfixes installed on Domain Controllers every month as part of our monthly DC patching process. I have been successful in getting these details for DC's with (Windows Server 2008
R2 SP1, Powershell v2.0) using the below command.
Get-HotFix -cn $computer | Select-Object PSComputerName,HotFixID,Description,InstalledBy,InstalledOn | where InstalledOn -ge (Get-Date -Day 1 -Format d) | FT -AutoSize
I execute the above from a jump box with powershell v4.0 (Server 2008 R2)
However, when I try the same command from the jump box to query DC's with (Server 2008 SP2, powershell v2.0). It doesn't return the InstalledOn date and time. It was giving error for the InstalledOn property and hence I renamed it to $_.InstalledOn. Now
I don't get error but still no details displayed for InstalledOn property.
I tried using the below, as could see on few forums that this might resolve the issue. I also tried removing the "where" part but still no installation date returned.
Get-HotFix -cn $computer | Select-Object HotFixID, Description, InstalledBy, @{l="InstalledOn";e={[DateTime]::Parse($_.psbase.properties["installedon"].value,$([System.Globalization.CultureInfo]::GetCultureInfo("en-US")))}}
| where {$_.InstalledOn -ge (Get-Date -Day 1 -Format d)} | FT -AutoSize
Have tried this locally on the 2008 SP2 DC but still not working. Please advise what is going wrong?
Note: If I execute the below command locally on the 2008 SP2 DC, I am getting the InstalledOn output. However, when executed from the jump box with powershell v4.0 (Server 2008 R2) to query
the same 2008 SP2 DC, it just gives the prompt again without any error or output. This behavior is consistent for other 2008 SP2 DC's in the environment.
Get-HotFix -cn $computer | Select-Object HotfixID,Description,InstalledBy,InstalledOn | where {$_.InstalledOn -ge (Get-Date -Day 1 -Format d)} | FT -AutoSize

Hi jrv, I have already tried the Win32_QuickFixEngineering option, which doesn't work either. Apologies for not mentioning the workarounds that I have already tried.
Get-Hotfix seems to be just a wrapper for Win32_QuickFixEngineering as per the below article. (http://technet.microsoft.com/en-us/library/hh849836.aspx)
I have seen a mention of using the WU ActiveX control on few forums, but was too lazy to read it through.
After rigorous testing, it makes me realize that somewhere the Get-Hotfix dates formatting\comparison isn't working.

Can I get MJD (date and time) in LabVIEW 2012 SP1?

I need to time stamp my data before sending it to the file. I have been doing this with the standard calendar date and time but MJD is what we prefer to use. How can I get an MJD timestamp in LabVIEW 2012 SP1?
Solved!
Go to Solution.

Hello Brad_Henry,
The Format Date/Time String will return the day of the year when the %j argument is used, as per this help document:
LabVIEW Help: Format Codes for the Time Format String
http://zone.ni.com/reference/en-XX/help/371361J-01/glang/codes_for_time_format_str/
If you're looking for the actual MJD, I'm not aware of a built-in function that generates this so you'll probably need to create or find a function to calculate it manually. This should pretty basic arithmetic, and it looks like people have already made a few public examples, the first two search results here look to be just about what you need:
ni.com search:
http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/catnav:ex/q/julian/
Regards,
Tom L.

Get-Content and add Date and Time in a new file

Hello,
in a existing file I have data like:
1;Idle
5;chrome
1;spoolsv
Now I need to grab the content and add date and time in front of each line and save it to another file like:
07.04.2015;10:18;1;Idle
07.04.2015;10:18;5;chrome
07.04.2015;10:18;1;spoolsv
But I don't have any idea how I could solve this challange. Does anyone have a helping hand for me?
Greetings

Hello,
If you need a new file with the desired output try this
get-content .\current.txt | Foreach-Object{ $dntv = (get-date) ; "$dntv" + $_} | Out-File newfile.txt
regards,
V
Venu

Macbook Pro's time/date and internet preferences reset at battery death.

I have a late 2009 Macbook Pro running Snow Leopard (10.6.8). Since a month ago, whenever I'm not able to get to my charger in time and my battery dies and I reboot it, the time and date settings are set back to December 31, 2000 7.00 pm. I have to reenter my internet and wifi information to connect to the web. No files are lost, but it is still an annoying problem to have to deal with every time my battery dies. This usually happens if I am not able to plug in the charger and turn it back on within about 5 minutes. Is this a common problem? Is anyone else suffering this?
Any suggestions and advice will be greatly appreciated and loved.
Thank you.
~Incho

This is common only when the battery in question is so old and tired that it lacks enough oomph even to preserve the date and time after the machine shuts down. You probably need a new battery, and at least until you get one, you need to avoid being in a situation where you can't plug into AC as soon as the low-battery warning appears. Or perhaps your battery is so far gone that the warning never appears, in which case you need a new battery even sooner.
What does System Profiler > Power say about the condition, cycle count, and full charge capacity of your battery, and is your MBP a 13", 15" or 17" model?

Z10 STL100-1 Date and Time gets reset

Similar Messages

Maybe you are looking for