ZBUS2032 not shown in workflow and status in SWEL- no receiver entered

I am trying to change an existing workflow(This one has the standard BO- BUS2032 linked). Now I am trying to link the same workflow to a custom BO(ZBUS2032) copied from BUS2032. This custom BO is generated, released, delegated. I have maintained the default values as
Method = DISPLAY and
Attribute = SALESDOCUMENT
Created an entry in SWE2 for ZWBUS2032 with
Object type = ZWBUS2032
EVENT = CREATED
RECEIVER = WS90000014
Receiver call = FM
Receiver FM = SWW_WI_CREATE_VIA_EVENT
checked the linkage activated checkbox and left the rest AS-IS
In the workflow side,
In the task screen- I added the task number that has (ZBUS2032 and the new method), specified the triggering events and binded, event is green. When I click on Define binding autom. it shows
WIOBJECT_ID = &ZBUS203&
In the actual event
I added the Object type to ZBUS2032 and the event as CREATED, clicked on start condition and specified the SALES document type condition but it doesn't go green.
When I click on the binding, on the right hand side of the new window where the workflow parameters are there, it still shows BUS2032 instead of ZBUS2032
No errors, I activated. When I hit the test, it still shows BUS2032.
When I do the process through front end and check SWEL, it says No receiver entered.
I am new to Workflow. Kindly please advice.
Regards,
Kiran

Hi,
What are you trying to do with the ZBUS2032?
IIf you create a new task that should call a new method (in ZBUS2032), if you enter BUS2032 as object type and then select the method, are you able to see the new method in the selection list? If yes, that would mean that you have delegated the ZBUS2032 properly. (=You have kind of extended the usage of the standard BUS2032 with the new Z-version).
You could also add some new attributes to your ZBUS2032. If you are able to see them in workflow builder or in the workflow log, this would also mean that the delegation has been done properly. (I just hope that you did the subtype in a way that Rick tried to describe).
In general I hope that you have tested your new functionality (method or attribute) directly in SWO1. If it works there, it should then work in the workflow too. I would be interested to know how you came into conclusion that ZBUS2032 is not working as it should? Do you see an error or what?
Regards,
Karri

Similar Messages

  • Inspection Lot Created but not shown in QE72, and cannot input result or UD

    Hi Exports,
    I have  Inspection Lot Created by 04-production goods receive, but not shown in QE72, and cannot input result or UD
    Inspection Lot status: CRTD CHCR SPRQ,
      in Business Process of inspection lot showing:
    *Cancel inspection lot
    Assign RMA proc. to insp. lot
    Assign notification to lot RMA
    Batch log indicator required
    Certificate missing
    Change inspection lot
    Change planned lot quantity
    Choose task list for insp. lot
    Confirm Receipt of Certificate
    Create part. lot for insp. lot
    Flag cancellation
    Inventory posting required
    Lock
    Lot for process documentation
    Lot reset allowed
    What is going wrong? 
    BTW, the sampling procedure in Inspection Plan is a read-only field, but empty inside.
    Daniel

    Dear in your case there is no Inspection plan was attached to the lot so attach the plan and make lot status to REL then only you can do Results Recording.
    Inspection plan gets auto assigned to availble inspection plan on respective date if you enabled the inspction with tasklist and automatic assignment boxes in relevant inspection types in MM QM view for this Inspction plant should be made avaialble in stsyem before any lot created which can be created QP01.
    If it is not getting assiged automatically then you can assign it manually by QA02 here go to inspection specification tab click on Task list assignment the go to sample tab and click on sample and SAVE Inspection plan will be attached to inspection plan.
    Once inspection plan is the lot status you can see REL before assignment of a plant it would be CRTD.
    Cheers
    KK

  • I WANT TO UNINSTALL ELEMENTS 10 ON WINDOWS 8 BUT IT IS NOT SHOWN UNDER PROGRAMMES AND FEATURES SO HOW DO i DO IT PLEASE?

    I
    WANT TO UNINSTALL ELEMENTS 10 ON WINDOWS 8 BUT IT IS NOT SHOWN UNDER PROGRAMMES AND FEATURES SO HOW DO i DO IT PLEASE?i

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements
    But please not all-caps.

  • I want to uninstall Elements 10 but it is not shown under Programmes and features in my Windows 8. How do I do it please?

    I want to uninstall Elements 10 but it is not shown under Programmes and features in my Windows 8. How do I do it please?

    See if this helps:
    https://helpx.adobe.com/photoshop-elements/kb/manually-remove-photoshop-elements-10.html

  • Sales order not shown in MD04 and product view

    Hi All,
    Sales order is created,but its not showing in MD04 and RRP3,The material type is X0.
    I checked the status of the sales order that is blocked for authorization,Is there any other reason for this.
    Regards,
    Prabhu

    Hi,
    In the sales order, please check the item category in the schedule lines.
    If the item category is CN, then you cannot see the requirements in MD04.
    The item category is determined from the MRP type set in the material master. Since it was ND earlier, the Item category  in the sales order became CN.
    Had the sales order been created after changing the MRP type, the Item category would have been CP and you can see the requirements in MD04.
    You can change the item category in the schedule line to CP and the requirements will be transferred to MD04.
    Once they are in MD04, they would automatically come to RRP3, provided the material exists in the active integration model.
    Regards,

  • Idoc not moved to application and status not updated

    Hi Guys,
    <b>I am facing one issue in our system for message type DESADV (inbound). please  read through </b>
    When an IDoc is pushed in from the external EDI system & even though the inbound Partner Profile is set to immediate processing mode:
    The IDoc stays in status 64 - 'IDoc ready to be transferred to application'. This assumes that the IDoc has not been processed yet
    and still needs to be processed with program RBDAPP01 (or via the “process” button in BD87).
    The issue can not be replicated in ‘test’ mode i.e. using WE19 to copy and process an IDoc, as it has been found that when using WE19 and processing is set to be immediate, the inbound update is fully completed and the IDoc status is set to 53 - Application document posted. 
    The issue occurs when an IDoc is ‘pushed’ into SAP from the external EDI system.  "
    Please help.

    Ramandeep28 wrote:
    But still I am not able to make any call.
    To/within which country?
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • HP Deskjet 2480 not shown in devices and printers

    i am new to windows 8.1 therefore i will be asking lot of questions in coming week
    i have installed BENQ Scanner 5000 and HP Deskjet 2480 all in one
    both scanners is not being picked up by my new HP Laptop running WIn 8.1
    when i connect BENQ Scanner it is not being shown in devices and printer
    when i connect HP Deskjet 2480, it is shown not connected in devices and printer
    they work fine in my old dell laptop running windows 7 see my post here which include screen shots http://www.eightforums.com/drivers-hardware/69205-both-scanner-not-working.html  

    Hi makhan10, Perhaps something is blocking the download from finishing, such as an Antivirus, or Firewall program. Let's try the following steps in this order:  Uninstall the software. Uninstalling the Printer Software. (Only if the software was partially installed, or installed previously, otherwise, carry on with the rest of these steps.)Clean boot the computer. How to perform a clean boot in Windows.Disable any Antivirus programs. Disable Antivirus software.Disable any firewall programs. Windows Firewall from start to finish.Create a new user account. Managing User Accounts and Logins (Windows 8).Reinstall using the HP Printer Install Wizard for Windows. Hope this helps!  “Please click the Thumbs up icon below to thank me for responding.”

  • Workflow and Status tracking

    Dear All,
    We should implement some kind of WORKFLOW solution to support the business planning process developed in SAP BI Integrated Planning.
    We analyzed the Status and Tracking system in SEM-BPS but it is not seems to be the best solution for us and it does not support the Integrated Planning (am I right?).
    What are the possible solutions for a workflow based process handling in an Integrated Planning solution and what are the possible (even non SAP) alternatives?
    Thanks in advance,
    Dezso

    Hello Ajay,
    When i execute the Web Interface, the following error appears:
    Unable to find:http://sdevsapbw:8002/sap/bc/bsp/sap/z100upsyal00001/z100upsyal00001.htm%3Fsap-client
    I’m not expert in this kind of solutions but our Queries are executed on web.
    I have arrived to this project two weeks ago and I tried to execute the queries in my computer and I am unable to do so. The error is the same when executing Web interface for BPS.
    I compared me internet settings with another guy and are equal.
    Do I have to do any configuration or install any Add-on?
    Thanks,
    João Arvanas

  • Customer field Not shown in ME21n and ME22N

    Hi,
    While creation ME21N and change ME22N we are unable to get Customer field in Delivery address tab of the PO, We are getting Address and Vendor (Sc Vendor) fields in Delivery address tab , but customer not able to see.
    The Customer field we can seen through ME23N.
    We have cross check screen layout for ME21N and ME22 and NBF here in all cases Customer field is Optional.

    Hi,
    Please check screen layout for AKTH & AKTV.
    Regards
    Subbu.

  • Ipod not shown on windows AND Itunes !

    I cannot see my Ipod when I plug it in my computer. It's neither on My Compuer nor on Itunes.
    I can't do anything about it, what's going on ??
    None of the articles of the website help me !
      Windows XP  

    I have a same problem.
    Brand new ,i have 5 usb port, and non of them working with the ipod shuffle. My printer, mause and keyboard working fine and all of them usb.
    Please help.

  • No data source - OLE DB provider for ODBC is not shown in import and export wizard

    Dear Sirs,
    Would you please let me know how to activate the OLE DB provider for ODBC in import and export wizard?
    Now I could use .NET framework for odbc only but it seems have problem in mapping table fields.
    Please advise.
    Thanks & Regards,
    Clara

    see this
    http://msdn.microsoft.com/en-us/library/windows/desktop/ms712975(v=vs.85).aspx
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • IDOC number and status

    Hi All,
    i am using Function Module IDOC_INBOUND_ASYNCHRONOUS to post inventory records.
    its posting the data sucsessfully but it does not return IDOC number and status.
    i can see the status and number in WE02 but please tell me how can i get that in my program.
    Thakns and regards
    Pankaj

    Hi friend,
           U can get the status and number of IDOC in WE05 and WE07.
           Once u get the number of IDOC got to table EDIDC(Control Rec table),
           EDID4(Data Rec table) and EDIDS(status Rec table) to get the information
           related to status and content of idoc.
           Directly, u can specify it in ur program as Tables:EDIDC,EDID4,EDIDS
           and get the info according to ur idoc number.
    Thanks N Regards,
            Manian.

  • Reading user input from a form within a workflow and perform actions in workflow based on the input

    Sharepoint 2013
    Need to get input from a user based on some condition within a workflow and based on the input received continue with the workflow. It can be a form with a text box and button to which i can redirect and when user enters a value and clicks on the button
    ,I should come back to the workflow and perform other processing. I should also be able to manually start this workflow from VS.
    Tried different approaches like initiation forms ,user input action of SP2010 etc all of these approaches either add some tasks to task list or force me to click on the workflow link to get input from a user.
    Any suggestions on this?

    Hello
    Thanks for the code, but I don't need an array of beans. By the way this code make a bean and an arraylist everytime it's called?
    I was looking for something like this:
    <form action="myjsp.jsp" method="post">
    ...so after submitting the result will go to the myjsp.jsp file and in the myjsp.jsp file
    <jsp:useBean id="value" class"myBean">
    <jsp:setpropertiy name"value" ....>so everytime I click the add button the values will go the mysjp.jsp file and that will set them in the javabean file. this method uses two files but I was looking for doing this in the same jsp file and not sending it to another file.
    chers
    Ehsan

  • Forms not shown correctly on ipad

    I have edited a form and made changes , it is absolutly fine under windows and easily filled out it is posted on workspaces too but people with ipad,iphone have problem first of all the form changes I made is not shown on theirs and they cannot fill it out why?

    Application is displayed correctly in Mozilaa Firefox even in 1024*768 resolution.
    But problem is seen in IE.
    So I think, code is not sensitive to resolution. But some problem with Flex in IE in this resolution.

  • CRM Workflow and ERP Workflow integration

    Hi,
    I need to get workflow to work across several modules. One example is that I have some actions that needs to be completed in CRM, and when that has finished I need to trigger a workflow in ERP to continue the processing. How can I send information from the CRM workflow to the ERP workflow, and status message back to CRM? I have been looking at Wf-XML options, but that seems to be across http communication only.. these systems can be on the same server. Can anyone give me some tips on how this can be done? Help is greatly appreciated!
    Regards,
    Thomas

    Hello,
    My suggestion is to trigger the events with a RFC of a Function module.
    Program the Function module in the ERP system and enable it as RCF function. In this module program the trigger for the prefered object.
    In the CRM workflow call a background method of the corresponding object which triggers the Function Module in the ERP system.
    Another solution could be that the action which was taken in CRM leads to a replication in the ERP which already triggers a standard event.
    Hopefully above guides you to a solution.
    Kind regards,
    Peter

Maybe you are looking for