ZCM Reporting install failure: Wrong OS

Hi, I have downloaded the ZCM_Reporting_10.1.0.iso and would install the server on my ZCM server what is installed on a SLES 10.2 x64 with ZCM 10.1.1 x64. But I got the install message: Not supported OS. Is it true ?

I was also "bitten" by this same problem...ZCM 10.1.1 on a 64-bit SLES 10 SP2 server and when I tried to install the ZCM Reporting Server I got the same message.
It was only when I reviewed the fine print, and I do mean fine print, in the software requirements did I realize that NO 64-bit OS was going to be suitable for the ZCM Reporting Server.
Usually you would not expect to run into trouble installing a 32-bit application on a 64-bit OS but they do crop up occasionally but I was not too concerned in the case of ZCM 10.1 on a 64-bit OS about whether or not the ZCM Reporting Server would install OK. Hey, isn't this stuff supposed to work together? What happened to making IT work as one?
This does need to get "fixed" by Novell and BO because it is a problem that should not exist in the ZCM 10 world to begin with. Shame on them for being so lazy about it.
Novell should have pointed this out IN LARGE TYPE THAT THE ZCM 10.1 REPORTING SERVER CANNOT BE INSTALLED ON ANY 64-BIT OS. Instead they kind of tucked it away in the fine print where it waited to bite us.
Tim Wessels
Originally Posted by Craig Wilson
At this point in time, BOE is only supported on a 32-Bit OS.
Novell is working with Business Objects to get support for 64-Bit Platforms.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"deban0" <[email protected]> wrote in message
news:[email protected]...
>
> Hi, I have downloaded the ZCM_Reporting_10.1.0.iso and would install the
> server on my ZCM server what is installed on a SLES 10.2 x64 with ZCM
> 10.1.1 x64. But I got the install message: Not supported OS. Is it true
> ?
>
>
> --
> deban0
> ------------------------------------------------------------------------
> deban0's Profile: NOVELL FORUMS - View Profile: deban0
> View this thread: ZCM Reporting install failure: Wrong OS - NOVELL FORUMS
>

Similar Messages

Installing ZCM Reporting SP2

With ZCM 1.3 I was try install ZCM Reporting to SLES 10 x86_64 and take error that this OS not supported (x64). After release SP2 i try install ZCM reporting too and take message, that need to uninstall ZCM Reporting SP1, but it not installing.
When i tell installer to uninstall previous version of ZCM Reporting i take error that it fail.
Any suggestion?

bronislav,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

I have repeatedly tried to install flashplayer on Mac 10.5.8 with no success. I have followed the online help document line by line and tried Mike M's suggestions to no avail. I now have no flashplayer and each time it continues to report a failure to lau

I have repeatedly tried to install flashplayer on Mac 10.5.8 with no success. I have followed the online help document line by line and tried Mike M's suggestions to no avail. I now have no flashplayer and each time it continues to report a failure to launch even when reset. the error report on apple state a breakpoint and unknow required load command whatever that is....HELP!

Hi Katie,
Flash Player is no longer supported on OS X 10.5.8. If you try to install one of the latest versions, it'll just terminate. You need Flash Player 10.3.183.90 (released 7/9/2013), which is the last version supported on OS X 10.5.8. The installer file is in this zip package, http://fpdownload.macromedia.com/pub/flashplayer/installers/archive/fp_10.3.183.90_archive _mac_only.zip.
If you have an Intel machine, you may want to consider upgrading to 10.9 (free upgrade) so that you can install the latest, most secure, version of Flash Player.
Maria

Remote Install Failure on AIA3.0

Hi,
Remote Install Failure on AIA 3.0:
AIA 3.0 installations on Windows XP-Pro is failing in Step 4 of 11 with the Error
"Node manager is down or the username and password entered is incorrect"
Details on the installation are as follows:
1) Installation is done on a Windows-XP 32 bit SP2, RAM - 4 GB.
2) SOA Suite 11gR1 PS1 and Weblogic 10.3.2 successfully installed.
3) SOA managed server, Admin server and node manager are running successfully on remote server.
4) The status of Node manager is reachable and has been confirmed through the admin console.
5) When installing AIA 3.0 use Remote Install option, the 4th step is failing after providing the node manager credentials of remote server.
Error message is "Node manager is down or the username and password entered is incorrect".
6) We given remote server configuration on 4th step (Host Name, Admin Port, Domain name, user/pass).
7) The Remote WLS Server is reachable.
8) Installer is always looking local node manager is not looking for Remote node manager which one is running on remote machine.
Error Log
Adding C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM for deletion.
Adding to classpath:file:/C:/WINNT/TEMP/OraInstall2010-04-29_04-25-49PM/ext/jlib/soawl.jar
Adding to classpath:file:/C:/WINNT/TEMP/OraInstall2010-04-29_04-25-49PM/ext/jlib/template.jar
null
configFileName:C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\footprint.xml
osName:Windows XP
Inside startPreReqOperation...prereq
osName:Windows XP
diskSpaceRequirements from engine:Home id =SoftwareOnlyOraclehome name=Oracle home variable=%AIA_HOME_PATH% fixedSpace=2048 unit=MB condition=null totalSpaceRequired=0 isConditionSatisfiedfalse
entryPoint: entryPoint = oracle.installType.all condition = null className = null
contextFile:C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\prereq\oui\agent_prereq_context.xml
The entry point is: oracle.installType.all
Check Name:CertifiedVersions
Check Description:This is a prerequisite condition to test whether the Oracle software is certified on the current O/S or not.
Expected result: One of 5.1,5.2,6.0,6.1
Actual Result: 5.1
Check complete. The overall result of this check is: Passed
Check Name:ServicePackChecks
Check Description:This is a prerequisite condition to test whether the Service Pack level recommended for installing the product is available on the system.
Expected result: 2
Actual Result: 2
Check complete. The overall result of this check is: Passed
Check Name:TotalMemory
Check Description:This is a prerequisite condition to test whether the system has sufficient physical memory.
Expected result: 1024MB
Actual Result: 3191MB
Check complete. The overall result of this check is: Passed
Property File location: D:\AIA3.1\New Folder\cd\Disk1\install\win32\aiaoneclick.properties
Item State: javax.swing.JComboBox[,170,52,262x18,invalid,layout=com.jgoodies.looks.plastic.PlasticComboBoxUI$PlasticComboBoxLayoutManager,alignmentX=0.0,alignmentY=0.0,border=,flags=4194632,maximumSize=,minimumSize=,preferredSize=,isEditable=true,lightWeightPopupEnabled=true,maximumRowCount=8,selectedItemReminder=AIA3]
Path: D:\Oracle11GPS\Oracle\Middleware_new\AIA3
Item State: javax.swing.JComboBox[,170,81,262x18,invalid,layout=com.jgoodies.looks.plastic.PlasticComboBoxUI$PlasticComboBoxLayoutManager,alignmentX=0.0,alignmentY=0.0,border=,flags=4194632,maximumSize=,minimumSize=,preferredSize=,isEditable=true,lightWeightPopupEnabled=true,maximumRowCount=8,selectedItemReminder=D:\Oracle11GPS\Oracle\Middleware_new\AIA3]
Home: AIA3
In processFieldStringAIA Home
In processFieldStringJAVA HOME
In processFieldStringAIA Home Path
In processFieldStringAIA Instance Name Contains invalid characters
getting root directory
D:\oracle11GPS\Middleware\user_projects\domains\dev_domain
truevalue for type of install
D:\Oracle11GPS\Oracle\Middleware_new\jdeveloper
D:\Oracle11GPS\Oracle\Middleware_new
*****Web Logic Home: D:\Oracle11GPS\Oracle\Middleware_new\wlserver_10.3
CLASSPATH: D:\Oracle11GPS\Oracle\Middleware_new\wlserver_10.3\server\lib\weblogic.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM;;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\adapters.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\adf-config.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\aqapi.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\bpelImport.log;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ccrQueries.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.cie.comdev_6.1.0.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.cie.config_6.0.0.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.core.common.security.api_1.0.0.0_5-1-0-0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.core.nodemanager.plugin_1.3.0.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\commonutils.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\connections.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\dms.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\emocmutl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\encrypt.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\encrypt.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\engine.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\enginehelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\footprint.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\glassfish.jaxb.xjc_1.0.0.0_2-1-7.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\glassfish.jaxb_1.0.0.0_2-1-7.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvest-tasks.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvest.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvest.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvester-10.3.1.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvester-ant.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvesterSettings.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\install.properties;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\jython-modules.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\log-config.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\log4fl.properties;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\message.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdbc5.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdl-log4j.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdl2.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\oneclick.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\oneofftool.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\runant.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\runant.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\setenv.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\setenv.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\soainstallhelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\soawl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\SysInfo.dll;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\template.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\tools.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\tools11g.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\types.properties;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\wlcipher.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\wlfullclient.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\wtinstallhelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\xml.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\xmlparserv2.jar;;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\OraInstaller.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\oneclick.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\xmlparserv2.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\share.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\OraInstallerNet.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\emocmutl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\emCfg.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\OraPrereq.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\jsch.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ssh.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\remoteinterfaces.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\http_client.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatch.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatchactions.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatchprereq.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatchutil.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstImages.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_de.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_es.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_fr.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_it.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_ja.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_ko.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_pt_BR.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_zh_CN.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_zh_TW.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\oracle_ice.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\help4.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\help4-nls.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ewt3.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ewt3-swingaccess.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ewt3-nls.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\swingaccess.jar;\;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\jewt4.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\jewt4-nls.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\orai18n-collation.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\orai18n-mapping.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ojmisc.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\xml.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\srvm.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\classes12.jar
1
localhost
LocalMachine
Connecting to Node Manager ...
<Apr 29, 2010 4:31:11 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
Either the password and username entered are incorrect or the node manager is down
Traceback (innermost last):
File "<string>", line 1, in ?
File "<iostream>", line 123, in nmConnect
File "<iostream>", line 618, in raiseWLSTException
WLSTException: Error occured while performing nmConnect : Cannot connect to Node Manager. : I/O error while reading domain directory
Use dumpStack() to view the full stacktrace
Anyone knows how to install AIA Remote Install on the remote SOA server?

Hi,
may be you enter the wrong username or password? Or there is a problem with certificate? The look file describe a wrong user name or password or nm is not reachable. Is it possible to start managed server via Admin Console? Please check nm log files.
Regards,
Marcel

Exchange Panel Install Failure (403)

When attempting to install Exchange Panel I receive an install failure notification and is reporting a download error, prompts to retry or contact customer support and an error code (403). I currently have PSE 11 installed and Adobe Application Manager. When Application Manger is launched it identifies Exchange Panel for installation. On previous attempts if also identified Edge Animate which installed correctly and is working as advertised. Any thoughts? Thanks. WIN7 64 BIT OS PSE 11 ver 11.0

Hi Dakraft001
Check your Firewall Settings ... !
See the below thread , if it helps : http://forums.adobe.com/message/5029812

Satellite L550 - SMART Reports HDD Failure Soon - What To Do?

Toshiba Satellite L550-113
On startup, I get a SMART message reporting HDD failure soon, and I'm requested to hit F1 before it will continue to boot to Windows (Vista 32 Bit).
The actual message from the Toshiba HDD Alert application is as follows:
Disk0
Your HDD has the SMART Predict Failure function which monitors the HDD operating status. Your HDD is experiencing a problem and SMART monitoring software predicts that the HDD will fail. Toshiba strongly recommends you create a back-up for your HDD data. Then contact an authorized service provider in order to check your drive and purchase a new replacement drive if necessary.
I've ordered a new HDD to replace the failing HDD (can't be bothered p*ssing about with RMA's and tech support).
However, is it possible to fix the old HDD once it's been removed? If I reformat it, will this do anything, or is it more serious than that?

Thanks for the advice. I used the Win7 backup process using an external HDD, then installed the new HDD and restored the system. The built-in Toshiba backup system software was corrupted & missing, so Win7 backup was my best option.
The laptop belonged to a family member who passed away last year, so I've no idea if the warranty still existed. I needed to get the laptop up and running as soon as possible, so going through the RMA process with Toshiba was always going to take too long.
My question still stands... is there anything I can do with the old drive to get it out of SMART mode failure?

I recently installed the xbox 360 controller app so that I could play my rockband drums in logic and ableton live but I installed the wrong one and I was wondering if anyone knew how to uninstall it from the system preferences page and the whole program?

If anyone could help I would greatly appreciate it and if anyone knows how to use the drum pads for those programs I mentioned would be great? I found a couple sites for using it with garageband but nothing as for mainly live and Im running OSX 10.6 so if anyone out there knows please let me know!!! The main reason I think I installed the wrong one is when I plug in the rockband drum kit to my usb port it dosen't show up in the xbox controller program but it lights up and I've tried all my different usb ports to see if that might be whats wrong but I still show nothing and I've also installed junXion and nothing shows up there either. So if anyone has any ideas just let me say thanks in advance!!!!!!!!

Hi Bonny,
Spotlight only finds somethings sometimes if that's how you searched.
Find Any File...
http://apps.tempel.org/FindAnyFile/
Hold Option or alt key when selecting Find to Find All.
EasyFind...
http://www.devon-technologies.com/download/
Near the bottom of the page.
Not sure this one will help after an uninstall, but...
AppZapper...
http://www.appzapper.com/

How to change number of retries and delay before retrying after software install failure

I deploy a software to client, but the installation is fail, so it will retry. but How to change the number of retries and delay before retrying after software install failure?
I find "Retry Settings" in "Software Distribution Component Properties". But I think it work for Distribution, not the installation. am I right?

First, are you referring to packages or applications because the behavior is different.
Also, why do you want it to retry a failure? It failed for a reason so you need to fix the cause of the failure first. If it failed the first, it will likely fail the next time for the same reason. In general, ConfigMgr will only retry on transient type
errors.
Jason | http://blog.configmgrftw.com

Photoshop Elements 10 Mac Ongoing Install Failure - Exit Code 7

Photoshop Elements 10 Mac Ongoing Install Failure - Exit Code 7
I downloaded Photoshop Elements 10 for Mac (not trial, with valid serial #)
Mac OSX 10.7.2, 3.6 GHz Intel Core i5, 16 GB RAM
I know the install package is valid because I installed it on my backup laptop (same Max OSX version) after I was having problems with my primary desktop and it installed fine. I have followed all the instructions on the install package including "restarting my system and installing again," and the install keeps failing with the same message:
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 18 error(s), 3 warning(s)
WARNING: DS013: Payload {298CF0B0-8B47-46DF-B726-8E4BFAD5432E} AdobeHelp 1.0.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {75063C76-E858-455B-9C26-89E55D26F276} AdobeHelp 3.2.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
ERROR: DS013: Verifying payload integrity : Failed with code 1
----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "/Library/Fonts/BickhamScriptPro-Regular.otf" Error 0(Seq 1519)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 1519)
ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
Suggestions? thanks.

Issue resolved with the help of Adobe Support (Mercer). My problem had been seen in another machine, there were empty folders in the Fonts Folder (Hard Drive>Library>Fonts) that the installer could not reconcile or delete, that was hanging up the Installer.
My fix was to delete the following empty folders from the Fonts Folder:
AdobeMingStd-Light.otf
BickhamScriptPro-Regular.otf
KozMinPro-Regular.otf
MyriadPro-BoldCond.otf
TektonPro-BoldCond.otf
And then re-run the installer (be sure to empty the trash).
My advice would be to first read the installer log and look for names of font folders that could not be resolved, then dump those. Another way would be to dump any empty folders in the Fonts Folder, empty the trash, then re-sun the installer.

Looking for a tool to search text fields in about 1000 reports installed on Business Objects Xi R3

Hi,
i am looking for a tool, program that can search all our reports installed on Business Objects Xi R3 for specific content in text fields and formulas.
We used a couple of years ago .rpt inspector, that worked pretty well for our purpose.
Unfortunately this is Win XP & Win Server 2003 only, so we can't reuse it anymore.
(I know there are way of getting WinXP that in a VMware, but that is not an option in our company.)
So i am interested , if there is another tool out there, which can help us?
regards Alex
btw we are using Business Objects XI R3 (SP7) with reports deisgned on crystal reports designer 2008

Hi,
i am looking for a tool, program that can search all our reports installed on Business Objects Xi R3 for specific content in text fields and formulas.
We used a couple of years ago .rpt inspector, that worked pretty well for our purpose.
Unfortunately this is Win XP & Win Server 2003 only, so we can't reuse it anymore.
(I know there are way of getting WinXP that in a VMware, but that is not an option in our company.)
So i am interested , if there is another tool out there, which can help us?
regards Alex
btw we are using Business Objects XI R3 (SP7) with reports deisgned on crystal reports designer 2008

Software Metering Report - Install base for all metered software programs - Returns 0

Hi All
I have an issue with one of the software metering reports, Install base for all metered software programs. when run it returns that the metered software is installed on 0 computers.
All usage reports seem to work correctly and I can see usage data for the monitored applications. But anything related to install base such as the one listed above and "Computers that have a metered program installed but have not run the program since
a specific date" either return 0 or are blank.
Any help will be greatly appreciated

Hi All
finally found a fix to the problem. It was very closely related to what Gareth had mentioned regarding Asset Intelligence. The actual method of detecting if a program is installed is done through Software Inventory
Under Custom Client Settings i had enabled Software Inventory on client but never setup any rules to gather data. So i created a new rule for all *.exe files and around an hour later the report started to show up clients.
This blog post also describes the method of setting up software inventory correctly
Thanks to all the help and hopefully this will aid anyone else encountering similar problems

Report (Week Calculating Wrongly)

Hi,
in Tools->Queries->User Queries->Anutone-RFD orderwise and itemwise both the report week caluclating wrongly,

Hi Nagendra Prasad,
Reports which are under user queries are not SAP B1 standard reports. These reports are developed by either SAP B1 end-users or your implementation / support partners.
Kindly approach people who created that report
or please share those queries here for a cross check.
Thanks
Unnikrishnan

11g Install Failure, Listener Error.

11g Install Failure, Listener.
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor.
I am attempting to install 11g, 11.1.0 onto a stand alone box which has Windows XP SP2 as the OS.
The box is at present not networked and as is not on a domain. The computer name is homedb.
I have installed the loopback adapter on 10.10.10.10 and updated my hosts file, the computer can resolve this to the computer name and vice versa.
Upon installing 11g and the starter database, the install continues normally, succeeding with the Oracle Net Configuration Assistant. However when the Oracle Database Configuration Assistant is run, 89% of the way through an error is thrown as follows:
Enterprise manager configuration failed due to the following error -
Listener is not up. Start the listener and run EM configuration again.
Refer to the log file at C:\Oracle\cfgtoollogs\dbca\emConfig. Log for more details.
You can retry configuring this database with Enterprise Manager later by manually running C:\Oracle\product\11.1.0\db_1\bin\emca script.
When I click ok on the error message the install completes as normal.
I can TNSPING orcl which results in the following:
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 20-JAN-2
008 12:36:33
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
C:\oracle\product\11.1.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(
PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
OK (20 msec)
I can connect to the database using sqlplus sys/password as sysdba but when I try to connect using
sqlplus sys@orcl and typing in the password I get the following error:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor.
This is also the error I get when using sql developer to connect to the db.
The extract from the log file mentioned above is as follows:
20-Jan-2008 12:14:09 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
20-Jan-2008 12:14:09 oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1530)
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1771)
     at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2708)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:368)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
     at java.lang.Thread.run(Thread.java:595)
20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up. Start the Listener and run EM Configuration Assistant again .
Refer to the log file at C:\oracle\cfgtoollogs\dbca\orcl\emConfig.log for more details.
20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up. Start the Listener and run EM Configuration Assistant again .
     at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2715)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:368)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
     at java.lang.Thread.run(Thread.java:595)
20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to C:\oracle\product\11.1.0\db_1\oui
My listener, tnsnames and sqlnet are as follows:
listener.ora:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(PORT = 1521))
sqlnet.ora:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
tnsnames.ora:
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
When logged into the database a SHOW PARAMETER SERVICE results in a service of orcl
Running the command: lsnrctl service, results in the following:
LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 20-JAN-2008 12:46
:52
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
The listener supports no services
The command completed successfully.
Running lsnrctl status results in the following:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Produ
ction
Start Date 20-JAN-2008 12:09:10
Uptime 0 days 0 hr. 40 min. 9 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\product\11.1.0\db_1\network\admin\listener.o
ra
Listener Log File c:\oracle\diag\tnslsnr\homedb\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=homedb)(PORT=1521)))
The listener supports no services
The command completed successfully
I have re run the db configuration again but it would not start because apparently there was no listener, running the Net Configuration Assistant makes no difference.
All firewalls and anti virus software have been disabled for the purposes of this install.
Do I need to manually register the listener with the database, if so how do I go about doing this?
I have installed 10g on a standalone box before with no trouble, what have I missed here?, any help greatly appreciated.

To answer my own question I fixed this by issuing the command
netsh winsocks reset
Winsocks deals with windows networking and can become corrupt through installs of software, virus cleaning, etc.
Hope that helps,
Adam

Why the test report's failure chain only display the first failure?

Hi All,
why the test report's failure chain only display the first failure step?how to get all the failure steps in the failure chain?
Thanks a lot.
BR
Johnny

Did a quick search and came across the following links
http://zone.ni.com/devzone/cda/tut/p/id/4563
http://zone.ni.com/devzone/cda/epd/p/id/3326
Regards
Ray Farmer

Premiere Elements 10 install failure on Mac osx 10

I have a copy of Adobe Premiere Elements 10, the five disk set, and keep having the same failure trying to install it on my Mac. I have gone through all the product requirements and made sure that my computer satisfies them, but I still find an install failure at 51%, Exit code 7, each time.
What can I do?

I had the exact same problem installing Premiere Elements 10 on a Mac from DVD. Exit code 7 when it reached 51% installation. I followed the link to "updated installation instructions" provided in this forum by Adobe Employee Jeff Wright. It works.
The instructions in a nutshell: DON'T USE THE DVD. Instead, download a trial version. When you install use the serial number provided with your DVD.
I find this to be extremely aggravating. I spent a lot of time trying using the Adobe Support Advisor application trying to sort through the error codes. Then I spent time trying to get through to Adobe Support (never did get through). Finally I tried the forum and found the answer here.
I find Adobe to be grossly inadequate in two ways. First, they put out a product that just wasn't tested. The DVD won't install on a Mac. It is as if they did not test their product. Second, their support is awful. This is a known problem with a known solution. When the fault occurs, the Adobe Support Advisor application should point the customer to the "updated installation instructions". Instead it points to faults that are unrelated so the customer is led on a wild goose chase.
I hope the product will be better than my experience so far.

ZCM Reporting install failure: Wrong OS

Similar Messages

Maybe you are looking for