Zend core xe / doesn't display server conf Unable to get status information

HI,
i've installed zend core + oracle xe.
However in zend core / system overview section i cannot read any info.
I got the message:
Unable to get status information from the web server.
Either the server-status module is not loaded, or it is not properly configured.
To load server-status module (if your server was not compiled with it),
please insert following string into your apache configuration file:
LoadModule status_module modules/mod_status.so
To configure it, please insert following section:
<Location /server-status>
SetHandler server-status
Order deny, allow
Deny from all
Allow from localhost
</Location>
I've enabled LoadModule status_module modules/mod_status.so
I've added SetHandler server-status to existing /zendcore serve alias
any idea
thanx

Hey,
i've fixed.
However i got this problem with zend core 1.31 windows / oracle xe / apache:
1 - I've removed the old one and apache 2 (last version) 2.058.
2 - Then i've searched all the registry key (apache / zend related) and erased them.
3 - Last step: installed zend core 1.4 (with the bundled version of the apache 2).
It works.
Note: for me you have always to delete all the apache group previous installation as well as the zend directory.
These directory are not deleted automatically by uninstall process.

Similar Messages

  • Iplanet  web server 7 -how to get more information when a certificate is untrusted ?

    Hi
    When a client tries to access to iplanet 7.0.15, we only get a line in the errors log with a simple error., for instance SSL_ERROR_UNKOWN_CA_ALERT...
    We would like to know if it is possible to configure iplanet to get more information about this request..
    iPLANET is receiving requests from a lot of clients and sometime it is difficult to identify the source of a error without more information..
    We would like have similar information that access log shows when certificate is valid
    We get the same information with log-level = info or finest..
    Thanks
    Uge

    Hi Uge,
    Setting the iPlanet Web Server log level to 'finest' will give you more information, but it is very verbose, and you still might not get the information you are looking for. You might want to try 'fine' or 'finer' first to see if either of those gives you the information you  need.
    With regards to the above error, SSL_ERROR_UNKOWN_CA_ALERT, this means that the client presented a certificate in the SSL handshake that was signed by a CA that the Web Server doesn't have in it's certificate database. In order to ensure the Web Server is kept upto date with the latest set of public CA certificates, I would recommend you upgrade to the latest version.
    If you know that the certificates the clients are using are from an internal CA, you need to ensure the Root CA Certificate from that internal CA is installed in the Web Servers certificate database as a trusted certificate.
    regards
    Tracey

  • How do you resolve the issue with an error message on the Mac mini server stating Unable to get users

    How do you resolve an issue when creating groups on a Mac Mini Server when this error message appears.
    "Unable to get Users & Groups State, The Open Directory master was created, but a problem was encountered trying to refresh the state of the server. Check log files for more info."

    Most likely, the Server was not configured correctly - DNS is a common issue, If DNS is not configured properly, OD will not be happy. You can run
    sudo changeip -checkhostname
    in Terminal to see of DNS is up and running.
    Here's a great tutorial (not mine) for setting up OS X Servers. The page says it's for a typical school environment, but it can be applied in many other environments.
    http://www.wazmac.com/servers_network/fileservers/osxserver_setup/index.htm
    hth
    Jeff

  • Power manager doesn't display - so I can't get rid of the power change beep...

    Hi everybody,
    I just got the X200 laptop, like it very much except for the annoyingly loud beep when the system goes into stand-by. Looking trough this forum I tried many things, like changing the sound settings in regedit to 'no' and disabling the 'beep' plugin in the system settings. No luck so far. An other solution (that sounds useful) is disabling the 'beep on power changes' option in the Power Manager. But...when I open the Power Manager, it displays the welcome/info screen and then disappears! How can I get into the Power Manager??
    Hope someone can help...
    Cheers,
    Hanneke

    That's a strange one. Run Thinkvantage System Update, or just download and install most recent PM driver and software. Maybe refreshing these will give you PM back. Otherwise, I believe you may also have a setting in the BIOS for the beep. Not in front of my X100 now, but I know I have this setting on my X60s.

  • Unable to get status from admin server

    Hi.
    I have a customer with the following issue :
    While in Admin Server on clustered environment they see their 2 nodes configured. They are unable to restart/stop/start and when they click on the node for more information it says Current Status 'Unknown Status'. An error has occurred. The stack trace below shows more information.
    !$vwa10-140-ppde3Admin IdcAdmin: !csUserEventMessage,01103010011318365301,ppde3.wcm.ess.usda.gov!$!csAdminUnableToAlterProcess!csAdminUnableToExecAction,start,stelppde3-oirecmsrvwa10
    intradoc.common.ServiceException: !csAdminUnableToAlterProcess!csAdminUnableToExecAction,start,stelppde3-oirecmsrvwa10
    they also get an error :
    (internal) 08.14 12:03:49.772 IdcServerThread-11 $BinDir missing
    (internal) 08.14 12:03:49.772 IdcServerThread-11 BinDir mismatch: \\10.100.98.11\kcecmsnas\stelppde1\bin/ ==>
    We tried a few things :
    1. Checked the attributes of the exes in the bin directory
    2. Tried to reinstall the NT services
    Any ideas ?
    Thanks.
    Frank

    Lenovo is aware that some models are unable to verify their correct warranty information through the Lenovo Solutions Center. There should be an update coming out within the next month or two that will correct this error.
    If you would like, you can send me a private Message with your serial numbers and I will verify your warranty information in the Lenovo System.
    Hoping to provide peace of mind
    Thank you for being a part of the Lenovo Family,
    Catie
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Donate KUDOS and Click "Accepted Solution"

  • Cannot load /usr/local/Zend/Core/modules/apache-eapi/libphp5.so into server

    Hello All.
    I download and install Zend Core for Oracle v.1 Linux x86-64 on
    Linux Server (2.6.9-42.0.3.ELsmp #1 SMP x86_64 x86_64 x86_64 GNU/Linux) and on the server I have Oracle Application Server 10g (1.2.0.2). I have the SELINUX=disable in the /etc/selinux/config and LD_LIBRARY_PATH= /usr/local/Zend/Core/lib/
    But when I start the midtier HTTPS I get the following error and not loading libphp5.so.
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server
    Error
    --> Process (pid=3203)
    failed to start a managed process after the maximum retry limit
    Log:
    /oracle/ias/mid10g1202/opmn/logs/HTTP_Server~1
    the HTTP_Server~1 log file contains this error message.
    /oracle/ias/mid10g1202/Apache/Apache/bin/apachectl start: execing httpd
    Syntax error on line 1095 of /oracle/ias/mid10g1202/Apache/Apache/conf/httpd.conf:
    Cannot load /usr/local/Zend/Core/modules/apache-eapi/libphp5.so into server: /usr/local/Zend/Core/modules/apache-eapi/libphp5.so: cannot open shared object file: No such file or directory
    Every thing fine when remove this line from httpd.conf file
    LoadModule php5_module /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
    help please.

    some info about the libphp5.so on the server.
    uname -a
    Linux web3 2.6.9-42.0.3.ELsmp #1 SMP Mon Sep 25 17:24:31 EDT 2006 x86_64 x86_64 x86_64 GNU/Linux
    ls -l /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
    -rwxr-xr-x 1 root root 5731064 Nov 19 16:25 /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
    md5sum /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
    e1b7ae62abb0989cc3e8600f0641095b /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
    file /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
    /usr/local/Zend/Core/modules/apache-eapi/libphp5.so: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), stripped
    ldd /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
    libcrypt.so.1 => /lib64/libcrypt.so.1 (0x0000002a95bf4000)
    libz.so => /usr/local/Zend/Core/lib/libz.so (0x0000002a95d28000)
    libssl.so.0.9.8 => /usr/local/Zend/Core/lib/libssl.so.0.9.8 (0x0000002a95e41000)
    libcrypto.so.0.9.8 => /usr/local/Zend/Core/lib/libcrypto.so.0.9.8 (0x0000002a95f9d000)
    libresolv.so.2 => /lib64/libresolv.so.2 (0x0000002a9626a000)
    libimf.so => /usr/local/Zend/Core/lib/libimf.so (0x0000002a9637f000)
    libm.so.6 => /lib64/tls/libm.so.6 (0x0000002a966e8000)
    libnsl.so.1 => /lib64/libnsl.so.1 (0x0000002a9686e000)
    libxml2.so.2 => /usr/local/Zend/Core/lib/libxml2.so.2 (0x0000002a96985000)
    libiconv.so.2 => /usr/local/Zend/Core/lib/libiconv.so.2 (0x0000002a96c82000)
    libsvml.so => /usr/local/Zend/Core/lib/libsvml.so (0x0000002a96e66000)
    libirc.so => /usr/local/Zend/Core/lib/libirc.so (0x0000002a96fa9000)
    libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x0000002a970eb000)
    libc.so.6 => /lib64/tls/libc.so.6 (0x0000002a971f6000)
    libdl.so.2 => /lib64/libdl.so.2 (0x0000002a9742a000)
    /lib64/ld-linux-x86-64.so.2 (0x000000552aaaa000)

  • Remote Server doesn't display SPRY Tabbed Panel

    I'm using DW CS4.  I inserted a SPRY Tabbed Panel in the main page for navigation.  The local development and testing server displays the Panel, but the remote server (Go Daddy) does not.  All of the data from the panel is displayed in one log page without the tab feature.
    The site's address is:  mailbox.mikeklonecki.com
    I saw a couple of other posts for a slideshow error using SPRY in DW, but this seems to be different behavior.  I don't get an error, rather the panel just doesn't display.
    Any feedback would be greatly appreciated.  Thank you in advance.

    I apologize.  I found my answer.
    Two required files (one .js and one .css) were not loaded into the right folder, so the page didn't have access to them.  After re-locating the files, the Tabbed panel works just fine.
    Please disregard the inquiry.

  • Graphs doesn't display on the crystal report server

    I have a graph that displays good on the developer and when saved on the server and run it from the server doesn't display the graph. Any thoughts why its not displaying?
    I also want to retrieve it from .net application using Managed RAS, is there any thing that I need to set for it display the graph output.

    I'm using the same code for all reports and it works fine....only problem is its not displaying graph reports.
    SessionMgr sessionMgr = new SessionMgr();
                EnterpriseSession enterpriseSession;
                ReportAppFactory reportAppFactory;
                ReportClientDocument reportClientDocument;
                EnterpriseService enterpriseService;
                InfoStore infoStore;
                InfoObjects infoObjects;
                InfoObject infoObject;
                // set the name of the CR server
                String crServerName = ConfigurationManager.AppSettings.Get("CRServerName");
                // set userid to logon to CR server
                String crUserID = ConfigurationManager.AppSettings.Get("CRUserID");
                //set pwd to logon to CR server
                String crPwd = ConfigurationManager.AppSettings.Get("CRPwd");
                //set userid to logon to database
                String dbUserID = ConfigurationManager.AppSettings.Get("DBUserID");
                //set pwd to logon to database
                String dbPwd = ConfigurationManager.AppSettings.Get("DBPwd");
                //pass Crystal enterprise logon credentials
                enterpriseSession = sessionMgr.Logon(crUserID, crPwd, crServerName, "secEnterprise");
                enterpriseService = enterpriseSession.GetService("InfoStore");
                infoStore = new InfoStore(enterpriseService);
                //pass the report Name to query and pass it to reportClientDocument
                infoObjects = infoStore.Query("Select SI_ID From CI_INFOOBJECTS Where SI_NAME='" + reportName + "' And SI_INSTANCE=0");
                infoObject = infoObjects[1];
                //Connecting to RAS (Report Aplication Server)
                EnterpriseService tempService = enterpriseSession.GetService("", "RASReportFactory");
                reportAppFactory = (ReportAppFactory)tempService.Interface;
                reportClientDocument = reportAppFactory.OpenDocument(infoObject.ID, 0);
                // Pass datbase logon credentials
                reportClientDocument.DatabaseController.logon(dbUserID, dbPwd);
    FileStream fs = null;
    BinaryWriter bw = null;
    rptFileName = u201CTestChartReport.pdf";
    fs = new FileStream(Server.MapPath("~/reports/" + rptFileName), FileMode.OpenOrCreate);
    bw = new BinaryWriter(fs);
    PrintOutputController rasPrintOutputController;
    CrReportExportFormatEnum rasReportExportFormat =   CrReportExportFormatEnum.crReportExportFormatPDF;
    rasPrintOutputController = reportClientDocument.PrintOutputController;
                ByteArray tempByteArray = rasPrintOutputController.Export(rasReportExportFormat, 0);
                Byte[] byteStreamOutput = tempByteArray.ByteArray;
    bw.Write(byteStreamOutput);
    String file = "reports/" + rptFileName;
    Response.Write("<scr" + "ipt>\r\n");
    Response.Write("open('" + file + "');\r\n");
    Response.Write("</scr" + "ipt>");

  • Httpd fail to start after Zend Core installation

    Hi!
    I need Zend, so I installed it using this instruction.
    The problem is that httpd daemon faild to start after that.
    Here is my /etc/httpd/conf/httpd.conf:
    # This is the main Apache HTTP server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
    # for a discussion of each configuration directive.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
    # with ServerRoot set to "/etc/httpd" will be interpreted by the
    # server as "/etc/httpd//var/log/httpd/foo_log".
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do not add a slash at the end of the directory path. If you point
    # ServerRoot at a non-local disk, be sure to point the LockFile directive
    # at a local disk. If you wish to share the same ServerRoot for multiple
    # httpd daemons, you will need to change at least LockFile and PidFile.
    ServerRoot "/etc/httpd"
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #Listen 12.34.56.78:80
    Listen 80
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule authn_file_module modules/mod_authn_file.so
    LoadModule authn_dbm_module modules/mod_authn_dbm.so
    LoadModule authn_anon_module modules/mod_authn_anon.so
    LoadModule authn_dbd_module modules/mod_authn_dbd.so
    LoadModule authn_default_module modules/mod_authn_default.so
    LoadModule authz_host_module modules/mod_authz_host.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_user_module modules/mod_authz_user.so
    LoadModule authz_dbm_module modules/mod_authz_dbm.so
    LoadModule authz_owner_module modules/mod_authz_owner.so
    LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    LoadModule authz_default_module modules/mod_authz_default.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    LoadModule auth_digest_module modules/mod_auth_digest.so
    LoadModule file_cache_module modules/mod_file_cache.so
    LoadModule cache_module modules/mod_cache.so
    LoadModule disk_cache_module modules/mod_disk_cache.so
    LoadModule mem_cache_module modules/mod_mem_cache.so
    LoadModule dbd_module modules/mod_dbd.so
    LoadModule dumpio_module modules/mod_dumpio.so
    LoadModule ext_filter_module modules/mod_ext_filter.so
    LoadModule include_module modules/mod_include.so
    LoadModule filter_module modules/mod_filter.so
    LoadModule substitute_module modules/mod_substitute.so
    LoadModule deflate_module modules/mod_deflate.so
    LoadModule ldap_module modules/mod_ldap.so
    LoadModule log_config_module modules/mod_log_config.so
    LoadModule log_forensic_module modules/mod_log_forensic.so
    LoadModule logio_module modules/mod_logio.so
    LoadModule env_module modules/mod_env.so
    LoadModule mime_magic_module modules/mod_mime_magic.so
    LoadModule cern_meta_module modules/mod_cern_meta.so
    LoadModule expires_module modules/mod_expires.so
    LoadModule headers_module modules/mod_headers.so
    LoadModule ident_module modules/mod_ident.so
    LoadModule usertrack_module modules/mod_usertrack.so
    #LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule setenvif_module modules/mod_setenvif.so
    LoadModule version_module modules/mod_version.so
    LoadModule proxy_module modules/mod_proxy.so
    LoadModule proxy_connect_module modules/mod_proxy_connect.so
    LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    LoadModule ssl_module modules/mod_ssl.so
    LoadModule mime_module modules/mod_mime.so
    LoadModule dav_module modules/mod_dav.so
    LoadModule status_module modules/mod_status.so
    LoadModule autoindex_module modules/mod_autoindex.so
    LoadModule asis_module modules/mod_asis.so
    LoadModule info_module modules/mod_info.so
    LoadModule suexec_module modules/mod_suexec.so
    LoadModule cgi_module modules/mod_cgi.so
    LoadModule cgid_module modules/mod_cgid.so
    LoadModule dav_fs_module modules/mod_dav_fs.so
    LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule dir_module modules/mod_dir.so
    LoadModule imagemap_module modules/mod_imagemap.so
    LoadModule actions_module modules/mod_actions.so
    LoadModule speling_module modules/mod_speling.so
    LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    LoadModule rewrite_module modules/mod_rewrite.so
    #FastCGI module
    LoadModule fcgid_module lib/apache/mod_fcgid.so
    AddHandler fcgid-script .php
    FCGIWrapper /usr/local/bin/php-cgi .php
    SocketPath /tmp/fcgidsock
    SharememPath /tmp/fcgidshm
    #php module
    #LoadModule php5_module modules/libphp5.so
    <IfModule !mpm_netware_module>
    <IfModule !mpm_winnt_module>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    User http
    Group http
    </IfModule>
    </IfModule>
    # 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #ServerName www.example.com:80
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/srv/http"
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # features.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "/srv/http">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # Options FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    <IfModule dir_module>
    DirectoryIndex index.html
    </IfModule>
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
    </FilesMatch>
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "/var/log/httpd/error_log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    <IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
    # You need to enable mod_logio.c to use %I and %O
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "/var/log/httpd/access_log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "/var/log/httpd/access_log" combined
    </IfModule>
    <IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
    </IfModule>
    <IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock /var/run/httpd/cgisock
    </IfModule>
    # "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/srv/http/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    # DefaultType: the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    <IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    </IfModule>
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #MIMEMagicFile conf/magic
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    ErrorDocument 400 /error.php?400
    ErrorDocument 401 /error.php?401
    ErrorDocument 403 /error.php?403
    ErrorDocument 404 /error.php?404
    ErrorDocument 500 /error.php?500
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall is used to deliver
    # files. This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    #EnableMMAP off
    #EnableSendfile off
    # Supplemental configuration
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.
    # Server-pool management (MPM specific)
    #Include conf/extra/httpd-mpm.conf
    # Multi-language error messages
    Include conf/extra/httpd-multilang-errordoc.conf
    # Fancy directory listings
    Include conf/extra/httpd-autoindex.conf
    # Language settings
    Include conf/extra/httpd-languages.conf
    # User home directories
    Include conf/extra/httpd-userdir.conf
    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf
    # Virtual hosts
    Include conf/extra/httpd-vhosts.conf
    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf
    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf
    # Various default settings
    Include conf/extra/httpd-default.conf
    # Secure (SSL/TLS) connections
    #Include conf/extra/httpd-ssl.conf
    # Note: The following must must be present to support
    # starting without SSL on platforms with no /dev/random equivalent
    # but a statically compiled-in mod_ssl.
    #php include
    Include conf/extra/php5_module.conf
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
    #<VirtualHost *:80>
    #ServerName oldforum
    #DocumentRoot /srv/oldforum
    #</VirtualHost>
    ### Start of Zend Core
    ### PHP Apache Module
    # LoadModule php5_module /usr/local/Zend/Core/modules/apache22/libphp5.so
    ### PHP FastCGI
    LoadModule zend_enabler_module /usr/local/Zend/Core/modules/apache22/zend_enabler.so
    FastCgiConfig /usr/local/Zend/Core/etc/zend_enabler.conf
    AddHandler zend-enabler-script .php
    ### PHP CGI
    # Action application/x-httpd-php /zend-cgi/php
    # ScriptAlias /zend-cgi/ /usr/local/Zend/Core/cgi-bin/
    AddType application/x-httpd-php .php
    DirectoryIndex index.php
    ExtendedStatus on
    Alias /ZendCore /usr/local/Zend/Core/GUI
    <Location /ZendCore>
    Options FollowSymLinks
    Order deny,allow
    Allow from all
    </Location>
    <Location /server-status>
    SetHandler server-status
    Order deny,allow
    Deny from all
    Allow from localhost
    Allow from 127.0.0.1
    </Location>
    <Location /server-info>
    SetHandler server-info
    Order deny,allow
    Deny from all
    Allow from localhost
    Allow from 127.0.0.1
    </Location>
    ### End of Zend Core
    Here is my /etc/php.ini:
    [PHP]
    ; About php.ini ;
    ; This file controls many aspects of PHP's behavior. In order for PHP to
    ; read it, it must be named 'php.ini'. PHP looks for it in the current
    ; working directory, in the path designated by the environment variable
    ; PHPRC, and in the path that was defined in compile time (in that order).
    ; Under Windows, the compile-time path is the Windows directory. The
    ; path in which the php.ini file is looked for can be overridden using
    ; the -c argument in command line mode.
    ; The syntax of the file is extremely simple. Whitespace and Lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = none ; sets foo to an empty string
    ; foo = "none" ; sets foo to the string 'none'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; This is the recommended, PHP 5-style version of the php.ini-dist file. It
    ; sets some non standard settings, that make PHP more efficient, more secure,
    ; and encourage cleaner coding.
    ; The price is that with these settings, PHP may be incompatible with some
    ; applications, and sometimes, more difficult to develop with. Using this
    ; file is warmly recommended for production sites. As all of the changes from
    ; the standard settings are thoroughly documented, you can go over each one,
    ; and decide whether you want to use it or not.
    ; For general information about the php.ini file, please consult the php.ini-dist
    ; file, included in your PHP distribution.
    ; This file is different from the php.ini-dist file in the fact that it features
    ; different values for several directives, in order to improve performance, while
    ; possibly breaking compatibility with the standard out-of-the-box behavior of
    ; PHP. Please make sure you read what's different, and modify your scripts
    ; accordingly, if you decide to use this file instead.
    ; - register_globals = Off [Security, Performance]
    ; Global variables are no longer registered for input data (POST, GET, cookies,
    ; environment and other server variables). Instead of using $foo, you must use
    ; you can use $_REQUEST["foo"] (includes any variable that arrives through the
    ; request, namely, POST, GET and cookie variables), or use one of the specific
    ; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending
    ; on where the input originates. Also, you can look at the
    ; import_request_variables() function.
    ; Note that register_globals is going to be depracated (i.e., turned off by
    ; default) in the next version of PHP, because it often leads to security bugs.
    ; Read http://php.net/manual/en/security.registerglobals.php for further
    ; information.
    ; - register_long_arrays = Off [Performance]
    ; Disables registration of the older (and deprecated) long predefined array
    ; variables ($HTTP_*_VARS). Instead, use the superglobals that were
    ; introduced in PHP 4.1.0
    ; - display_errors = Off [Security]
    ; With this directive set to off, errors that occur during the execution of
    ; scripts will no longer be displayed as a part of the script output, and thus,
    ; will no longer be exposed to remote users. With some errors, the error message
    ; content may expose information about your script, web server, or database
    ; server that may be exploitable for hacking. Production sites should have this
    ; directive set to off.
    ; - log_errors = On [Security]
    ; This directive complements the above one. Any errors that occur during the
    ; execution of your script will be logged (typically, to your server's error log,
    ; but can be configured in several ways). Along with setting display_errors to off,
    ; this setup gives you the ability to fully understand what may have gone wrong,
    ; without exposing any sensitive information to remote users.
    ; - output_buffering = 4096 [Performance]
    ; Set a 4KB output buffer. Enabling output buffering typically results in less
    ; writes, and sometimes less packets sent on the wire, which can often lead to
    ; better performance. The gain this directive actually yields greatly depends
    ; on which Web server you're working with, and what kind of scripts you're using.
    ; - register_argc_argv = Off [Performance]
    ; Disables registration of the somewhat redundant $argv and $argc global
    ; variables.
    ; - magic_quotes_gpc = Off [Performance]
    ; Input data is no longer escaped with slashes so that it can be sent into
    ; SQL databases without further manipulation. Instead, you should use the
    ; function addslashes() on each input element you wish to send to a database.
    ; - variables_order = "GPCS" [Performance]
    ; The environment variables are not hashed into the $_ENV. To access
    ; environment variables, you can use getenv() instead.
    ; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
    ; By default, PHP surpresses errors of type E_NOTICE. These error messages
    ; are emitted for non-critical errors, but that could be a symptom of a bigger
    ; problem. Most notably, this will cause error messages about the use
    ; of uninitialized variables to be displayed.
    ; - allow_call_time_pass_reference = Off [Code cleanliness]
    ; It's not possible to decide to force a variable to be passed by reference
    ; when calling a function. The PHP 4 style to do this is by making the
    ; function require the relevant argument by reference.
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    engine = On
    ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
    zend.ze1_compatibility_mode = Off
    ; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
    ; NOTE: Using short tags should be avoided when developing applications or
    ; libraries that are meant for redistribution, or deployment on PHP
    ; servers which are not under your control, because short tags may not
    ; be supported on the target server. For portable, redistributable code,
    ; be sure not to use short tags.
    short_open_tag = On
    ; Allow ASP-style <% %> tags.
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    precision = 14
    ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
    y2k_compliance = On
    ; Output buffering allows you to send header lines (including cookies) even
    ; after you send body content, at the price of slowing PHP's output layer a
    ; bit. You can enable output buffering during runtime by calling the output
    ; buffering functions. You can also enable output buffering for all files by
    ; setting this directive to On. If you wish to limit the size of the buffer
    ; to a certain size - you can use a maximum number of bytes instead of 'On', as
    ; a value for this directive (e.g., output_buffering=4096).
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    zlib.output_compression = Off
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    implicit_flush = Off
    ; The unserialize callback function will called (with the undefind class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instanciated.
    ; A warning appears if the specified function is not defined, or if the
    ; function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func=
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 100
    ; Whether to enable the ability to force arguments to be passed by reference
    ; at function call time. This method is deprecated and is likely to be
    ; unsupported in future versions of PHP/Zend. The encouraged method of
    ; specifying which arguments should be passed by reference is in the function
    ; declaration. You're encouraged to try and turn this option Off and make
    ; sure your scripts work properly with it in order to ensure they will work
    ; with future versions of the language (you will receive a warning each time
    ; you use this feature, and the argument will be passed by value instead of by
    ; reference).
    allow_call_time_pass_reference = Off
    ; Safe Mode
    safe_mode = Off
    ; By default, Safe Mode does a UID compare check when
    ; opening files. If you want to relax this to a GID compare,
    ; then turn on safe_mode_gid.
    safe_mode_gid = Off
    ; When safe_mode is on, UID/GID checks are bypassed when
    ; including files from this directory and its subdirectories.
    ; (directory must also be in include_path or full path must
    ; be used when including)
    safe_mode_include_dir =
    ; When safe_mode is on, only executables located in the safe_mode_exec_dir
    ; will be allowed to be executed via the exec family of functions.
    safe_mode_exec_dir =
    ; Setting certain environment variables may be a potential security breach.
    ; This directive contains a comma-delimited list of prefixes. In Safe Mode,
    ; the user may only alter environment variables whose names begin with the
    ; prefixes supplied here. By default, users will only be able to set
    ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
    ; Note: If this directive is empty, PHP will let the user modify ANY
    ; environment variable!
    safe_mode_allowed_env_vars = PHP_
    ; This directive contains a comma-delimited list of environment variables that
    ; the end user won't be able to change using putenv(). These variables will be
    ; protected even if safe_mode_allowed_env_vars is set to allow to change them.
    safe_mode_protected_env_vars = LD_LIBRARY_PATH
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ;open_basedir =
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <font color="??????"> would work.
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.bg = #FFFFFF
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; Misc
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    expose_php = On
    ; Resource Limits ;
    max_execution_time = 30 ; Maximum execution time of each script, in seconds
    max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
    memory_limit = 128M ; Maximum amount of memory a script may consume (128MB)
    ; Error handling and logging ;
    ; error_reporting is a bit-field. Or each number up to get desired error
    ; reporting level
    ; E_ALL - All errors and warnings
    ; E_ERROR - fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatability of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; Examples:
    ; - Show all errors, except for notices and coding standards warnings
    ;error_reporting = E_ALL & ~E_NOTICE & ~E_STRICT
    ; - Show all errors, except for notices
    ;error_reporting = E_ALL & ~E_NOTICE
    ; - Show only errors
    ;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
    ; - Show all errors
    error_reporting = E_ALL
    ; Print out errors (as a part of the output). For production web sites,
    ; you're strongly encouraged to turn this feature off, and use error logging
    ; instead (see below). Keeping display_errors enabled on a production web site
    ; may reveal security information to end users, such as file paths on your Web
    ; server, your database schema or other information.
    display_errors = Off
    ; Even when display_errors is on, errors that occur during PHP's startup
    ; sequence are not displayed. It's strongly recommended to keep
    ; display_startup_errors off, except for when debugging.
    display_startup_errors = Off
    ; Log errors into a log file (server-specific log, stderr, or error_log (below))
    ; As stated above, you're strongly advised to use error logging in place of
    ; error displaying on production web sites.
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line until ignore_repeated_source is set true.
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; sourcelines.
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    report_memleaks = On
    ; Store the last error/warning message in $php_errormsg (boolean).
    track_errors = Off
    ; Disable the inclusion of HTML tags in error messages.
    ; Note: Never use this feature for production boxes.
    ;html_errors = Off
    ; If html_errors is set On PHP produces clickable error messages that direct
    ; to a page describing the error or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://www.php.net/docs.php
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot.
    ; Note: Never use this feature for production boxes.
    ;docref_root = "/phpmanual/"
    ;docref_ext = .html
    ; String to output before an error message.
    ;error_prepend_string = "<font color=ff0000>"
    ; String to output after an error message.
    ;error_append_string = "</font>"
    ; Log errors to specified file.
    ;error_log = filename
    ; Log errors to syslog (Event Log on NT, not valid in Windows 95).
    ;error_log = syslog
    ; Data Handling ;
    ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
    ; The separator used in PHP generated URLs to separate arguments.
    ; Default is "&".
    ;arg_separator.output = "&"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; Default is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ;arg_separator.input = ";&"
    ; This directive describes the order in which PHP registers GET, POST, Cookie,
    ; Environment and Built-in variables (G, P, C, E & S respectively, often
    ; referred to as EGPCS or GPC). Registration is done from left to right, newer
    ; values override older values.
    variables_order = "GPCS"
    ; Whether or not to register the EGPCS variables as global variables. You may
    ; want to turn this off if you don't want to clutter your scripts' global scope
    ; with user data. This makes most sense when coupled with track_vars - in which
    ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
    ; variables.
    ; You should do your best to write your scripts so that they do not require
    ; register_globals to be on; Using form variables as globals can easily lead
    ; to possible security problems, if the code is not very well thought of.
    register_globals = Off
    ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
    ; and friends. If you're not using them, it's recommended to turn them off,
    ; for performance reasons.
    register_long_arrays = Off
    ; This directive tells PHP whether to declare the argv&argc variables (that
    ; would contain the GET information). If you don't use these variables, you
    ; should turn it off for increased performance.
    register_argc_argv = On
    ; Maximum size of POST data that PHP will accept.
    post_max_size = 8M
    ; Magic quotes
    ; Magic quotes for incoming GET/POST/Cookie data.
    magic_quotes_gpc = Off
    ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
    magic_quotes_runtime = Off
    ; Use Sybase-style magic quotes (escape ' with '' instead of \').
    magic_quotes_sybase = Off
    ; Automatically add files before or after any PHP document.
    auto_prepend_file =
    auto_append_file =
    ; As of 4.0b4, PHP always outputs a character encoding by default in
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    default_mimetype = "text/html"
    ;default_charset = "iso-8859-1"
    ; Always populate the $HTTP_RAW_POST_DATA variable.
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    ;include_path = ".:/php/includes"
    ; Windows: "\path1;\path2"
    ;include_path = ".;c:\php\includes"
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    ;extension_dir = "./"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    enable_dl = On
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request.
    ; cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; cgi.redirect_status_env = ;
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; fastcgi.impersonate = 1;
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    upload_max_filesize = 2M
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    allow_url_fopen = On
    ; Define the anonymous ftp password (your email address)
    ;from="[email protected]"
    ; Define the User-Agent string
    ; user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    default_socket_timeout = 60
    ; If your scripts have to deal with files from Macintosh systems,
    ; or you are running on a Mac and need to deal with files from
    ; unix or win32 systems, setting this flag will cause PHP to
    ; automatically detect the EOL character in those files so that
    ; fgets() and file() will work regardless of the source of the file.
    ; auto_detect_line_endings = Off
    ; Module Settings ;
    [Date]
    ; Defines the default timezone used by the date functions
    [Syslog]
    ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
    ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
    ; runtime, you can define these variables by calling define_syslog_variables().
    define_syslog_variables = Off
    [mail function]
    ; For Win32 only.
    SMTP = localhost
    smtp_port = 25
    ; For Win32 only.
    ;sendmail_from = [email protected]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    [SQL]
    sql.safe_mode = Off
    [ODBC]
    ;odbc.default_db = Not yet implemented
    ;odbc.default_user = Not yet implemented
    ;odbc.default_pw = Not yet implemented
    ; Allow or prevent persistent links.
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of uodbc.defaultlrl and uodbc.defaultbinmode
    odbc.defaultbinmode = 1
    [MySQL]
    ; Allow or prevent persistent links.
    mysql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
    ; at MYSQL_PORT.
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysql.default_password =
    ; Maximum time (in secondes) for connect timeout. -1 means no limimt
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    mysql.trace_mode = Off
    [MySQLI]
    ; Maximum number of links. -1 means no limit.
    mysqli.max_links = -1
    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
    ; at MYSQL_PORT.
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysqli.default_pw =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mSQL]
    ; Allow or prevent persistent links.
    msql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    msql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    msql.max_links = -1
    [PostgresSQL]
    ; Allow or prevent persistent links.
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Noitce message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    pgsql.log_notice = 0
    [Sybase]
    ; Allow or prevent persistent links.
    sybase.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybase.max_links = -1
    ;sybase.interface_file = "/usr/sybase/interfaces"
    ; Minimum error severity to display.
    sybase.min_error_severity = 10
    ; Minimum message severity to display.
    sybase.min_message_severity = 10
    ; Compatability mode with old versions of PHP 3.0.
    ; If on, this will cause PHP to automatically assign types to results according
    ; to their Sybase type, instead of treating them all as strings. This
    ; compatability mode will probably not stay around forever, so try applying
    ; whatever necessary changes to your code, and turn it off.
    sybase.compatability_mode = Off
    [Sybase-CT]
    ; Allow or prevent persistent links.
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybct.max_links = -1
    ; Minimum server message severity to display.
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    sybct.min_client_severity = 10
    [dbx]
    ; returned column names can be converted for compatibility reasons
    ; possible values for dbx.colnames_case are
    ; "unchanged" (default, if not set)
    ; "lowercase"
    ; "uppercase"
    ; the recommended default is either upper- or lowercase, but
    ; unchanged is currently set for backwards compatibility
    dbx.colnames_case = "lowercase"
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    bcmath.scale = 0
    [browscap]
    ;browscap = extra/browscap.ini
    [Informix]
    ; Default host for ifx_connect() (doesn't apply in safe mode).
    ifx.default_host =
    ; Default user for ifx_connect() (doesn't apply in safe mode).
    ifx.default_user =
    ; Default password for ifx_connect() (doesn't apply in safe mode).
    ifx.default_password =
    ; Allow or prevent persistent links.
    ifx.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ifx.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ifx.max_links = -1
    ; If on, select statements return the contents of a text blob instead of its id.
    ifx.textasvarchar = 0
    ; If on, select statements return the contents of a byte blob instead of its id.
    ifx.byteasvarchar = 0
    ; Trailing blanks are stripped from fixed-length char columns. May help the
    ; life of Informix SE users.
    ifx.charasvarchar = 0
    ; If on, the contents of text and byte blobs are dumped to a file instead of
    ; keeping them in memory.
    ifx.blobinfile = 0
    ; NULL's are returned as empty strings, unless this is set to 1. In that case,
    ; NULL's are returned as string 'NULL'.
    ifx.nullformat = 0
    [Session]
    ; Handler used to store/retrieve data.
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored. Note: Windows users have to change this
    ; variable in order to use PHP's session functions.
    ; As of PHP 4.0.1, you can define the path as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    ;session.save_path = "/tmp"
    ; Whether to use cookies.
    session.use_cookies = 1
    ; This option enables administrators to make their users invulnerable to
    ; attacks which involve passing session ids in URLs; defaults to 0.
    ; session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    session.name = PHPSESSID
    ; Initialize session on request startup.
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    session.cookie_domain =
    ; Handler used to serialize data. php is the standard serializer of PHP.
    session.serialize_handler = php
    ; Define the probability that the 'garbage collection' process is started
    ; on every session initialization.
    ; The probability is calculated by using gc_probability/gc_divisor,
    ; e.g. 1/100 means there is a 1% chance that the GC process starts
    ; on each request.
    session.gc_probability = 1
    session.gc_divisor = 1000
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    session.gc_maxlifetime = 1440
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; cd /path/to/sessions; find -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope, albeit register_globals
    ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning seperately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled.
    session.bug_compat_42 = 0
    session.bug_compat_warn = 1
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    session.referer_check =
    ; How many bytes to read from the file.
    session.entropy_length = 0
    ; Specified here to create the session id.
    session.entropy_file =
    ;session.entropy_length = 16
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    session.cache_limiter = nocache
    ; Document expires after n minutes.
    session.cache_expire = 180
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publically accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    session.use_trans_sid = 0
    ; Select a hash function
    ; 0: MD5 (128 bits)
    ; 1: SHA-1 (160 bits)
    session.hash_function = 0
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; 4 bits: 0-9, a-f
    ; 5 bits: 0-9, a-v
    ; 6 bits: 0-9, a-z, A-Z, "-", ","
    session.hash_bits_per_character = 5
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatability mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. Default = 25
    ;mssql.max_procs = 25
    [Assertion]
    ; Assert(expr); active by default.
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ;assert.warning = On
    ; Don't bail out by default.
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you want
    ; error_reporting(0) around the eval().
    ;assert.quiet_eval = 0
    [Ingres II]
    ; Allow or prevent persistent links.
    ingres.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ingres.max_persistent = -1
    ; Maximum number of links, including persistents. -1 means no limit.
    ingres.max_links = -1
    ; Default database (format: [node_id::]dbname[/srv_class]).
    ingres.default_database =
    ; Default user.
    ingres.default_user =
    ; Default password.
    ingres.default_password =
    [Verisign Payflow Pro]
    ; Default Payflow Pro server.
    pfpro.defaulthost = "test-payflow.verisign.com"
    ; Default port to connect to.
    pfpro.defaultport = 443
    ; Default timeout in seconds.
    pfpro.defaulttimeout = 30
    ; Default proxy IP address (if required).
    ;pfpro.proxyaddress =
    ; Default proxy port.
    ;pfpro.proxyport =
    ; Default proxy logon.
    ;pfpro.proxylogon =
    ; Default proxy password.
    ;pfpro.proxypassword =
    [Sockets]
    ; Use the system read() function instead of the php_read() wrapper.
    sockets.use_system_read = On
    [com]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constat registrations
    ;com.autoregister_verbose = true
    [mbstring]
    ; language for internal character representation.
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation accoding to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ;mbstring.func_overload = 0
    [FrontBase]
    ;fbsql.allow_persistent = On
    ;fbsql.autocommit = On
    ;fbsql.default_database =
    ;fbsql.default_database_password =
    ;fbsql.default_host =
    ;fbsql.default_password =
    ;fbsql.default_user = "_SYSTEM"
    ;fbsql.generate_warnings = Off
    ;fbsql.max_connections = 128
    ;fbsql.max_links = 128
    ;fbsql.max_persistent = -1
    ;fbsql.max_results = 128
    ;fbsql.batchSize = 1000
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
    ; With mbstring support this will automatically be converted into the encoding
    ; given by corresponding encode setting. When empty mbstring.internal_encoding
    ; is used. For the decode settings you can distinguish between motorola and
    ; intel byte order. A decode setting cannot be empty.
    ;exif.encode_unicode = ISO-8859-15
    ;exif.decode_unicode_motorola = UCS-2BE
    ;exif.decode_unicode_intel = UCS-2LE
    ;exif.encode_jis =
    ;exif.decode_jis_motorola = JIS
    ;exif.decode_jis_intel = JIS
    [Tidy]
    ; The path to a default tidy configuration file to use when using tidy
    ;tidy.default_config = /usr/local/lib/php/default.tcfg
    ; Should tidy clean and repair output automatically?
    ; WARNING: Do not use this option if you are generating non-html content
    ; such as dynamic images
    tidy.clean_output = Off
    [soap]
    ; Enables or disables WSDL caching feature.
    soap.wsdl_cache_enabled=1
    ; Sets the directory name where SOAP extension will put cache files.
    soap.wsdl_cache_dir="/tmp"
    ; (time to live) Sets the number of second while cached file will be used
    ; instead of original one.
    soap.wsdl_cache_ttl=86400
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example:
    ; extension=msql.so
    ; Note that it should be the name of the module only; no directory information
    ; needs to go here. Specify the location of the extension with the
    ; extension_dir directive above.
    zend_core_dir="/usr/local/Zend/Core"
    zend_gui_password=63a9f0ea7bb98050796b649e85481845
    zend_core.default_gui_language=en
    zend_gui.ini_modifier_path="/usr/local/Zend/Core"
    extension_dir="/usr/local/Zend/Core/lib/php/20060613"
    include_path=".:/usr/local/Zend/ZendFramework/library:/usr/local/Zend/Core/share/pear"
    zend_extension="/usr/local/Zend/Core/lib/zend/ZendExtensionManager.so"
    zend_extension_manager.optimizer="/usr/local/Zend/Core/lib/zend/optimizer"
    zend_extension_manager.debug_server="/usr/local/Zend/Core/lib/zend/debugger"
    zend_ini_file=/usr/local/Zend/Core/etc/zend.ini
    [zend]
    extension=apc.so
    extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    extension=curl.so
    ;extension=db2.so
    ;extension=exif.so
    ;extension=ftp.so
    extension=gd.so
    ;extension=gettext.so
    ;extension=gmp.so
    ;extension=ibm_db2.so
    extension=iconv.so
    extension=imap.so
    ;extension=ldap.so
    extension=mbstring.so
    ;extension=mcrypt.so
    ;extension=memcache.so
    ;extension=mhash.so
    ;extension=ming.so
    extension=mysql.so
    extension=mysqli.so
    ;extension=oci8.so
    ;extension=pcntl.so
    extension=pdo.so
    ;extension=pdo_ibm.so
    extension=pdo_mysql.so
    ;extension=pdo_oci.so
    extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    extension=pgsql.so
    ;extension=posix.so
    ;extension=shmop.so
    extension=soap.so
    ;extension=sockets.so
    ;extension=sqlite.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=tokenizer.so
    ;extension=xmlreader.so
    ;extension=xmlrpc.so
    extension=xmlwriter.so
    ;extension=xsl.so
    ;extension=zip.so
    ;extension=bz2.so
    ;extension=calendar.so
    ;extension=db2.so
    ;extension=exif.so
    ;extension=ftp.so
    ;extension=gettext.so
    ;extension=gmp.so
    ;extension=ibm_db2.so
    ;extension=ldap.so
    ;extension=mcrypt.so
    ;extension=memcache.so
    ;extension=mhash.so
    ;extension=ming.so
    ;extension=oci8.so
    ;extension=pcntl.so
    ;extension=pdo_ibm.so
    ;extension=pdo_oci.so
    ;extension=pdo_sqlite.so
    ;extension=posix.so
    ;extension=shmop.so
    ;extension=sockets.so
    ;extension=sqlite.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=tokenizer.so
    ;extension=xmlreader.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    Please, tell me what's the reason and what I should do.
    Thanks in advance.

    Hi Garyalbert,
    Welcome to Lenovo Community!
    I’m sorry to hear that you are facing the issue with No POST on ThinkPad X240.
    To resolve the issue I suggest you to perform power drain, to go with power drain option please removing power adapter and battery. Hold the power button for 30 second and then connect only power adapter and try to switch on the system. If the system is switching ON then connect battery and check it once.
    Hope this helps! 
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Image doesn't display

    I have index.jsp at the root level. I this redirects to xrate.jsp at the following path: WEB-INF/views/jsp. At the same level is include.jsp and includeTop.jsp. My images are at WEB-INF/images. CSS files are at WEB-INF/styles. Here's thier jsp declaration code:
    xrate.jsp
    <%@ include file="include.jsp"%>
    <%@ include file="includeTop.jsp"%>
    <html>
         <head>
              <title></title>
         </head>
         <body>     
              <h1>
                    Application - Borrower System
              </h1>
         </body>
    </html>include.jsp
    <%@ page language="java" errorPage="/error.jsp" pageEncoding="UTF-8"
        contentType="text/html; charset=utf-8"%>
    <%@ taglib uri="http://www.springframework.org/tags" prefix="spring"%>
    <%@ taglib uri="http://java.sun.com/jstl/core" prefix="c"%>
    <%@ taglib uri="http://java.sun.com/jstl/fmt" prefix="fmt"%>includeTop.jsp
    <%@ include file="/WEB-INF/views/jsp/include.jsp"%>
    <html>
        <head>
            <title></title>
            <link rel="stylesheet" type="text/css" href="../../styles/xrate.css" />
        </head>
        <body>
            <div id="logo">
                <img src="../../images/xrate-logo.jpg" width="720"  height="140" border="0" alt="Logo" />
            </div>
        </body>
    </html>xrate.css
    div#logo {
         width: 720px;
         height: 140px;
         background: #A8A8A8;
    }When xrate.jsp loads, I get everything except the image doesn't display, just its placeholder with the alternate text.
    I am using MyEclipse's jsp visual designer and in the preview mode, the image properly shows. I've checked the deployed files and everything is in the correct location. Also, the browser is set to allow images to download.
    Any ideas anyone??

    Take your images/styles out of the WEB-INF directory.
    The WEB-INF directory is protected from the browser.
    Nothing requested from the WEB-INF directory will be served directly. You can forward/include these resources from other servlets/jsps but they can't be accessed from a direct url.
    Shifting images/styles out of the WEB-INF directory should fix it.
    You will of course have to fix your links.
    Note that links are resolved relative to the requesting uri (or the html <base> tag if present), not necessarily to the actual location of the JSP.

  • Zend Core 4 Oracle spawn so many php-cgi.exe

    I am installing Zend Core for Oracle on Win XP Pro SP2 with all default option. Installation went OK and can connect to existing Oracle database.
    But when i saw processes in memory using Process Explorer, there are 8 php-cgi.exe spawned by Apache server. Is this normal?
    Thanks in advance,
    Nur Hidayat
    Message was edited by:
    nurhidayat

    Hi Penski
    I couldn't find the registry key you mentionbefore, but I modified fastcgi.conf in C:\Program Files\Zend\Core For Oracle\etc instead.
    I am actually new to web development, is it true that the more cgi server spawned means the more visitor you can server in your website? is there any limitation on how many visitor can a cgi server can serve?
    Thanks,
    Nur Hidayat

  • E18 - "Your display server does not support XComposite..."

    I used e17 quite a bit, but since it was upgraded to e18, I've run into this problem.
    ESTART: 0.00000 [0.00000] - Begin Startup
    ESTART: 0.00004 [0.00004] - Signal Trap
    ESTART: 0.00004 [0.00000] - Signal Trap Done
    ESTART: 0.00005 [0.00001] - Eina Init
    ESTART: 0.00019 [0.00013] - Eina Init Done
    ESTART: 0.00019 [0.00000] - Determine Prefix
    ^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:25^[[0m =================================
    ^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:26^[[0m Enlightenment relocation handling
    ^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:27^[[0m =================================
    ^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:28^[[0m PREFIX: /usr
    ^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:29^[[0m BINDIR: /usr/bin
    ^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:30^[[0m LIBDIR: /usr/lib
    ^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:31^[[0m DATADIR: /usr/share/enlightenment
    ^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:32^[[0m LOCALE: /usr/share/locale
    ^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:33^[[0m =================================
    ESTART: 0.00027 [0.00009] - Determine Prefix Done
    ESTART: 0.00034 [0.00007] - Environment Variables
    ESTART: 0.00036 [0.00001] - Environment Variables Done
    ESTART: 0.00036 [0.00000] - Parse Arguments
    ESTART: 0.00037 [0.00001] - Parse Arguments Done
    ESTART: 0.00037 [0.00001] - Eet Init
    ESTART: 0.00163 [0.00126] - Eet Init Done
    ESTART: 0.00164 [0.00001] - Ecore Init
    ESTART: 0.00512 [0.00348] - Ecore Init Done
    ESTART: 0.00514 [0.00001] - EIO Init
    ESTART: 0.00516 [0.00002] - EIO Init Done
    ESTART: 0.00517 [0.00001] - Ecore Event Handlers
    ESTART: 0.00517 [0.00001] - Ecore Event Handlers Done
    ESTART: 0.00518 [0.00000] - Ecore_File Init
    ESTART: 0.00566 [0.00049] - Ecore_File Init Done
    ESTART: 0.00567 [0.00001] - Ecore_Con Init
    ESTART: 0.00567 [0.00000] - Ecore_Con Init Done
    ESTART: 0.00568 [0.00000] - Ecore_Ipc Init
    ESTART: 0.00569 [0.00001] - Ecore_Ipc Init Done
    ESTART: 0.00569 [0.00001] - Ecore_X Init
    ESTART: 0.00958 [0.00388] - Ecore_X Init Done
    ESTART: 0.00959 [0.00002] - Ecore_Evas Init
    ESTART: 0.00978 [0.00018] - Ecore_Evas Init Done
    ESTART: 0.00978 [0.00001] - Elementary Init
    ESTART: 0.01301 [0.00323] - Elementary Init Done
    ESTART: 0.01302 [0.00001] - Emotion Init
    ESTART: 0.01645 [0.00344] - Emotion Init Done
    ESTART: 0.01646 [0.00001] - Ecore_Evas Engine Check
    ESTART: 0.01647 [0.00001] - Ecore_Evas Engine Check Done
    ESTART: 0.01648 [0.00000] - Edje Init
    ESTART: 0.01648 [0.00001] - Edje Init Done
    ESTART: 0.01649 [0.00001] - E Intl Init
    ESTART: 0.01650 [0.00002] - E Intl Init Done
    ESTART: 0.01651 [0.00001] - E_Alert Init
    ESTART: 0.01651 [0.00000] - E_Alert Init Done
    ESTART: 0.01652 [0.00000] - E_Hints Init
    ESTART: 0.01683 [0.00031] - E_Hints Init Done
    ESTART: 0.01683 [0.00001] - E_Configure Init
    ESTART: 0.01687 [0.00003] - E_Configure Init Done
    ESTART: 0.01687 [0.00000] - E Directories Init
    ESTART: 0.01695 [0.00008] - E Directories Init Done
    ESTART: 0.01696 [0.00001] - E_Filereg Init
    ESTART: 0.01696 [0.00001] - E_Filereg Init Done
    ESTART: 0.01696 [0.00000] - E_Config Init
    ^[[32;1mINF<^[[0me^[[32;1m>^[[0me_config.c:1223^[[0m Performing config upgrade for 1.12
    ^[[32;1mINF<^[[0me^[[32;1m>^[[0me_config.c:1244^[[0m Performing config upgrade for 1.13
    ESTART: 0.01766 [0.00070] - E_Config Init Done
    ESTART: 0.01767 [0.00001] - E_Randr Init
    E_RANDR CONFIG RESTORE
    Calculated Screen Size: 1920 1080
    ESTART: 0.01850 [0.00083] - E_Randr Init Done
    ESTART: 0.01850 [0.00001] - E_Xinerama Init
    ESTART: 0.01851 [0.00001] - E_Xinerama Init Done
    ESTART: 0.01851 [0.00000] - E_Env Init
    ESTART: 0.01851 [0.00001] - E_Env Init Done
    ESTART: 0.01852 [0.00001] - E_Scale Init
    ESTART: 0.01851 [0.00001] - E_Env Init Done
    ESTART: 0.01852 [0.00001] - E_Scale Init
    ESTART: 0.01853 [0.00001] - E_Scale Init Done
    ESTART: 0.01854 [0.00000] - E_Pointer Init
    ESTART: 0.01854 [0.00001] - E_Pointer Init Done
    ESTART: 0.01855 [0.00001] - E Paths Init
    ESTART: 0.01856 [0.00001] - E Paths Init Done
    ESTART: 0.01857 [0.00001] - E_Ipc Init
    ESTART: 0.01864 [0.00007] - E_Ipc Init Done
    ESTART: 0.01864 [0.00001] - E_Font Init
    ESTART: 0.01865 [0.00001] - E_Font Init Done
    ESTART: 0.01865 [0.00000] - E_Font Apply
    ESTART: 0.01866 [0.00001] - E_Font Apply Done
    ESTART: 0.01866 [0.00000] - E_Canvas Recache
    ESTART: 0.01867 [0.00001] - E_Canvas Recache Done
    ESTART: 0.01868 [0.00000] - E_Theme Init
    ESTART: 0.01870 [0.00002] - E_Theme Init Done
    ESTART: 0.01870 [0.00001] - E_Moveresize Init
    ESTART: 0.01871 [0.00001] - E_Moveresize Init Done
    ESTART: 0.01871 [0.00000] - Efreet Init
    ESTART: 0.01980 [0.00109] - Efreet Init Done
    ESTART: 0.01981 [0.00001] - E_Intl Post Init
    ESTART: 0.02764 [0.00783] - E_Intl Post Init Done
    ESTART: 0.02766 [0.00002] - E_Actions Init
    ESTART: 0.02800 [0.00034] - E_Actions Init Done
    ESTART: 0.02801 [0.00001] - Screens Init
    ESTART: 0.02801 [0.00001] - screens: atoms
    ESTART: 0.02820 [0.00019] - screens: manager
    ESTART: 0.02822 [0.00002] - screens: container
    ESTART: 0.02823 [0.00001] - screens: zone
    ESTART: 0.02824 [0.00001] - screens: desk
    ESTART: 0.02824 [0.00001] - screens: menu
    ESTART: 0.02826 [0.00002] - screens: exehist
    ESTART: 0.02827 [0.00001] - screens: get roots
    ESTART: 0.02828 [0.00001] - screens: focus
    ESTART: 0.02828 [0.00001] - screens: border
    ESTART: 0.02830 [0.00002] - E_Comp Init
    <<<< Enlightenment Error >>>>
    Your display server does not support XComposite, or Ecore-X was built without XComposite support. Note that for composite support you will also need XRender and XFixes support in X11 and Ecore.
    <<<< Enlightenment Error >>>>
    Enlightenment cannot setup compositing.
    E18: Begin Shutdown Procedure!
    ^[[31mERR<^[[0mefreet_cache^[[31m>^[[0mlib/efreet/efreet_cache.c:1108^[[0m org.enlightenment.DBus.Canceled Canceled by user.
    E - PID=849, valgrind=0
    Apparently ever since they upgraded from e17 to e18, they now require XComposite. I'm using the default package through pacman. Pacman installed all the required packages it apparently needs. I've tried uninstalling e18 completely and reinstalling which didn't work. When I do a pacman search for XComposite, E-core-X and XRender, the updated libraries show up.
    Do I need to build every package from scratch just to get this to work?  Or is there an easier way? I tried googling the problem, but only four sites came up with three being .c code. The other didn't offer any real help.
    Thank you in advance for any help.

    Scimmia wrote:hmm, 1.9.3-1 was just released, but 1.9.2-1 should work just fine. Anything custom in your X setup? How about trying a clean configuration (rename ~/.e and let E recreate it)?
    There's nothing custom in my X setup. I've tried deleting the .e folder but still no luck. I'm not sure if it helps, but here's my xorg.conf file. I'm also using the closed source NVIDIA drivers if that matters.
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 1680 0
    Screen 1 "Screen1" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "1"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Ancor Communications Inc ASUS VE258"
    HorizSync 24.0 - 83.0
    VertRefresh 50.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "Monitor1"
    VendorName "Unknown"
    ModelName "Ancor Communications Inc ASUS VW224"
    HorizSync 30.0 - 85.0
    VertRefresh 55.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GTX 550 Ti"
    BusID "PCI:1:0:0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "Device1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GTX 550 Ti"
    BusID "PCI:1:0:0"
    Screen 1
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "Stereo" "0"
    Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1680x1050 +0+0; DFP-0: 1440x900 +0+0; DFP-0: 1440x90$
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Device1"
    Monitor "Monitor1"
    DefaultDepth 24
    Option "Stereo" "0"
    Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Disable"
    EndSection

  • WEB.SHOW_DOCUMENT sometimes doesn't display the generated PDF file

    Hi all,
    I'm using the following code to generated my report from Forms:<br><br>
    V_REPORT_ID := FIND_REPORT_OBJECT(V_REPORT_NAME);
    V_REPORT_SERVER_JOB:= RUN_REPORT_OBJECT(V_REPORT_ID,P_LIST);
        V_JOB_ID := substr(V_REPORT_SERVER_JOB,length(:GLOBAL.REPORTS_SERVER)+2,length(V_REPORT_SERVER_JOB));
        V_REPORT_STATUS := REPORT_OBJECT_STATUS(V_REPORT_SERVER_JOB);
    LOOP
       IF V_REPORT_STATUS = 'FINISHED' THEN          
          V_TMP_PDF := :GLOBAL.APACHE_HTML_FOLDER ||'rpt'|| V_JOB_ID  ||'.pdf' ;
         COPY_REPORT_OBJECT_OUTPUT(V_REPORT_SERVER_JOB, V_TMP_PDF );
        WEB.SHOW_DOCUMENT(:GLOBAL.AS_HOME_URL ||  'rpt'|| V_JOB_ID  ||'.pdf' ,'_BLANK');     
        END IF;
    END LOOP; <br><br>
    Everything works fine except the WEB.SHOW_DOCUMENT part. In some clients, this command does what it required from it and opens a new browser window with the PDF report displayed on it. In some other clients, this command does nothing: now window dispalyed. When I refer to the Application Server, I see the PDF report successfully generated there. When I put the URL of the generated report manually in the browser address, I can see the report.
    <br><br>
    <b>Why the WEB.SHOW_DOCUMENT doesn't display the generated PDF report in some clients?</b>

    I agree with the previous 2 posters.
    Also firefox and ie handle it differently. Make sure you test on what your clients use.
    Sometimes acrotray.exe is completely retarded and doesn't work.

  • Using Mac as X11 display server for app running on Linux

    Hello all,
    I am in the midst of learning Arabic, and am trying to get to the point of becoming comfortable with computing on Arabic screens with Arabic menus, etc. The Mac doesn't support this for Arabic, although it does for many other languages. (Neither does the Windows box, apparently, on a user by user basis. It looks like I would have to install Arabic Windows to get Arabic GUI. Somebody please correct me if I'm wrong.)
    On my Linux server, however, I have most of my applications set up for multiple languages, and this works fine. I have a user set up who is my Arabic-speaking alterego with his default language set to Arabic and most applications respect it. However, the display for my Linux server is in a cramped corner, while the iMac, of course, sits proudly on my desk. It occurs to me that I should be able to use X11 for Mac so I can learn to think in Arabic in regal splendor.
    I have X11 installed on here - I use it for OpenOffice locally - but am having trouble getting an application on the Linux box to see my display. Here is what I am doing:
    - I do xhost + on the Mac side (merepoint) to permit remote connections.
    - From the X11 terminal program on the Mac, I ssh over to my Linux server (openocean). I have tried ssh with no command line switches and with -X and with -Y. None of them appear to set the DISPLAY environment variable on the Linux box.
    - I run a Gnome or KDE application in the Linux session and it immediately doesn't find a display. It indicates an empty display string. (What a surprise.)
    - I run the command over there specifying -display merepoint:0 and it pauses and then doesn't find the display. This feels like the Mac isn't listening for remote connections or listens on some other port or display ID. I can ping back to my iMac just fine so it isn't confused about IP address or naming.
    What do I need to do (at either end) to allow the connection to go through?
    There appear to be no hardware issues. I'm not sure how the security, etc. works with X beyond opening or closing stuff from the display server with xhost. ssh and .Xauthority also comes into the mix somewhere, I think, but I'm confused as to the role they play and how they interact. I don't know if the X stuff on the Mac needs some special tweak to listen for remote connections. I didn't see any switches about that in the X11 preferences.
    Eventually, I'd like to use Command-Opt-A to switch between my Mac screen and full-screen kdm login to the Linux box so I don't need to run over there. Any hints for getting that arrangement working - beyond the obvious user preference for full-screen, which works fine - would be valuable as well.
    RalphM
    iMac G4 20"   Mac OS X (10.4.4)  

    Thank you! Setting up "X11Forwarding yes" on the server side and restarting sshd did the trick. Now from my ssh session, I can do "LANG=ar_LB gedit" on the command line and get gedit with Arabic menus.
    I found that I could even get my whole desktop up, albeit with some amusing things happening with sound across the room, using startkde. Is there a better way to get this effect?
    Now I can just log in as my Arabic alterego and it should all work pretty well.
    RalphM

  • JSP doesn't display Oracle varchar2 Items on screen

    I recently bought new laptop with windows XP professional with service pack 2. Loaded Oracle 10g Client on it. I have a Dell server with Linux and Oracle database 9i. Accessed the this database through new laptop using SQL plus window and works OK. (With that it is sure that my hosts file updated correct with proper IP address of server and tnsnames.ora files).
    I have created a JSP application to access this database. It works perfectly OK in my old laptop with Windows XP home with service pack1. The connections are established through ODBC Data Source Administrator (Control Panel->Administrative Tools->Data Sources) by adding a System Data Source. The application works perfectly OK and displays all fields that I intended and coded for. Only thing is it has Oracle 9i client.
    But the same application in the new laptop doesn't work properly. It doesn't display Varchar2 values. It displays only Number and Date data types. This shows it is connecting to the database (oracle 9i). But varchar2 values are not displayed. The connections are established through ODBC Data Source Administrator.
    I'm using Tomcat server (jakart-tomcat-5.0.27) on both the laptop. Please help me here.

    Suggestion: don't use the ODBC driver to connect to Oracle. I presume you are using sun's JDBC-ODBC bridge?
    Oracle have got a reasonably good 100% java JDBC driver which is all you need, and is a lot better than the ODBC bridge. I would recommend using the Oracle thin driver.
    Your java code should remain largely unchanged. The only thing you would need to alter would be
    1 - driver class being loaded (oracle.jdbc.driver.OracleDriver)
    2 - driver url (default would be something like: jdbc:oracle:thin:@127.0.0.1:1521:ORCL)
    3 - You would need the oracle jdbc driver in the classpath (ojdbc14.jar) You can find that in [ORA_HOME]/jdbc/lib
    If you've written your database connection using a JNDI datasource, then all you would need to change would be the configuration in your tomcat server.
    Hope this helps,
    evnafets

Maybe you are looking for