Zero Balance Customer Statements

Hello,
How can I exclude customer/vendors with a zero balance from receiving a customer statement? A link to help will not be helpful as I have read through that documentation already. Any help would be really appreciated.
Thanks,
Justin

Hello Justin,
see the settings "assign program to correspondence type". Here you have a program and a variant. The standard program is RFKORD10. Use SA38 to create a variant that has the setting: balance in local currency not equal to zero.
Hope this helps.
BR
Gabor

Similar Messages

  • F.27--customer statements lists even customer  that have zero balance

    F.27--customer statements lists even customer  that have zero balance. How can this be changed to list only customer with balance higher than zero?
    Edited by: MN on Feb 9, 2010 10:24 PM

    Hi,
    Can you please advice how did you solve this problem as I also need to work on the same.
    Thanks

  • Customer statements for credit balances (F.27)

    We need to be able to run "Periodic Account Statements in SAP, transaction F.27, for customers that have a credit balance.
    For clarity, this is a balance that is less than ZERO, for example if a customer has an outstanding credit item on their account that exceeds any debit amount, eg: invoice for $100, payment for $150, net CREDIT balance of ($50)
    In accordance with direction from our auditors, we need to be able to print and send these statements, as we do with the present process of sending monthly statements to customers that have a debit balance, and send them to customers. I'd be really surprised if this functionality is not built into SAP.
    My Question is: Can this change be made using a built-in functionality in SAP like make config changes in SAP IMG or would this need to be programmed? If it can be done in SAP by making config changes please post the steps. Thanks.

    SOLUTION:
    When you run the transaction F.27 you specify a Company code and a Correspondence type. The correspondence type has a print program and a variant associated to it through SAP IMG (config). During its run F.27 calls the program + variant dynamically. The variant controls the selection screen of that print program. One of the fields on that selection screens is "Balance in local currency". The value for that field was set to greater than zero (Balance in local currency > 0). This is why F.27 was skipping any Customer Statements which had a balance less than zero (i.e. credit balance).
    You can check the program name and variant associated with a correspondence type by following this path in SAP IMG:
    SPRO > SAP Reference IMG > SAP Customizing Implementation Guide > Financial Accounting > Financial Accounting Global Settings > Correspondence > Assign programs for Correspondence Types
    and you can modify the variant by using transaction SE38.

  • Customer Statement with opening and closing balances

    Dear Forum,
    The users want to generate the Customer Statement with opening and closing balances like the traditional one. The statement now generated gives the list of all open items as on date, but the users want the statement with opening balances as on the date of the begining of the range specified and the closing balance at the end of the period for which the statement is generated. Is there a way to generate the same from the system.
    Thanks for the help.
    Regards,

    Hi,
    SPRO> Financial Accounting (New) > Accounts Receivable and Accounts Payable > Customer Accounts > Line Items > Correspondence > Make and Check Settings for Correspondence
    You can use the program RFKORD10 with correspondance type SAP06 for your company code
    This program prints account statements and open items lists for customers and vendors in letter form. For account statements, all postings between two key dates, as well as the opening and closing balance, are listed.
    Regards,
    Gaurav

  • Opening balance and closing balance on Receivables Customer Statement repor

    I need an opening balance and closing balance of the customer statement in one report. Currently I developed a custom Customer statement report in report builder 6i. I developed a custom procedure to retrieve the previous statement balance. I’m able to successfully retrieve ending balance statement with sysdate but if I go back to previous date or previous statement date then I’m not getting the right ending balance of the report.
    Even the seeded api arp_customer_aging provides the ending balance for sysdate but not for previous dates because this api always looks back to amount due remaining column(ar_payment_schedules_all).
    Did any one ever develop a custom logic to get previous balance and ending balance on one single customer statement?

    Hi,
    I am working on the same logic. My program loads opening and closing balance and a list of items everyday. The GL_balances table gives you current balance but if you want the previous balance, you have to use : "gl_daily_balances" table and provide accounting_date for which you want the balance.
    Hope this Helps!
    Yogini

  • If a customer has a zero balance in second local currency

    If a customer has a zero balance in second local currency but some
    balance in company code currency before clearing, we want to keep zero
    balance in second local currency after clearing. How can we solve this
    problem? Is it possible to clear customer open items using second or
    third local currency?
    When the customers have several documents in different currencies, we
    have the problem below:
    We want to analyze the customeru2019s balance in Euro and USD. (second and
    third local currencies)
    However the invoices and some incoming payments have different document
    currencies. Invoices are in document currency TRY, incoming payments
    are in document currency Euro or USD. In this case, we plan to use
    second or third local currency for deciding balances instead of first
    local currency. But when we clear the documents using currency TRY
    (local currency), system creates exchange rate difference for TRY and
    also for the second and third local currencies. We do not want to have
    foreign exchange differences after clearing, for the second or third
    currencies since their balances were already zero. After clearing the
    balances are not zero anymore, and we do not want this happen.
    Thanks for your help in advance.

    Hi,
    Have you maintained table OABT?
    Study the useful documentation about this Tcode in the following Menu path:
    SPRO >> Financial Accounting >> Asset Accounting >> Valuation >> Currencies >> Specify the Use of Parallel Currencies
    Thanks
    Palani

  • Balance Brought Forward Customer Statement

    Hi there, everyone
    Our company would like to print customer statements in a balance brought forward format. By "Balance Brought Forward" I mean that the statement starts with an Opening Balance (being the previous month's closing balance), then reflects all receipts (not applications), invoices, credit memos, debit memos, adjustments and discounts and then totals to a closing balance. It would also be ideal if a payment schedule could be printed detailing what portion of the final balance is due on what dates.
    We are still on 10.7NCA, so if this functionality is available in 11 or 11i, please will someone let me know. Otherwise, if there is anyone out there who has done this, please can you send me some pointers.
    Regards
    Mark

    Hello,
    This issue should be solved in 2007 A / 2007 B version. Please clarify to which version you are referring.
    Thanks for the input.

  • Customer Statement - PLD - Prior Period Balance

    When one uses the standard Customer Statement, the prior period balance shows up. It is a field defined as TEXT field, Free Text and the text value is 9999999999.
    When I copied (save as) this standard customer statement, the prior period balance no longer shows up. Further more, if I copy this field from the customer statement (F_033) to my new copy it doesn't work and if I manually create a new field it doesn't work either on the new statement.
    How does one get a prior period balance to show when the field is a text field and not a formula field.
    Any help would be greatly appreciated.

    Hi Marli,
    This is the norm of B1. Your client should be able to get used to it soon.
    Thanks,
    Gordon

  • Customer Statement in Balance Forward Format

    Have Oracle introduced a customer statement in a Balance Brought Forward format as yet? We need the ability to print customer statements comprising:
    (a) An opening balance (being the previous period's closing balance)
    (b) Details of all credit memos, debit memos, invoices, adjustments, etc for the current period
    (c) Receipts (as opposed to individual applications) i.e. if a customer pays $1000 in respect of 2 invoices of $500 each, a single entry displaying a credit of $1000 should appear on the statement
    (d) A closing balance for the period
    Additionally, it would be ideal if a payment schedule (indicating what potion of the balance is due when) could also be displayed on the statement (e.g. if the customer's balance is $1500; $700 may be due on 31-AUG, $500 may be due on 30-SEP and the balance may be due on 31-OCT.
    We are still on 10.7NCA and I was wondering whether anyone knows whether this has since been implemented and, if not, whether there are plans to implement this. We have become so frustrated with not been able to do this that we are considering re-implementing a system that will provide this functionality.
    null

    Just to add to my question and be more specific -
    On the customer recieveable ageing - I would like to add the rest of the address field as it only pull out the first line. Is there any way I can refresh the tables with the addtional field?
    I found the PLD convertor is useful as I was able to add the field in for the address and then convert into the converted PLD2CR However the SAP format in crystal looks much neater and visually better looking than the PLD version.
    I would like to add the address fields into the Crystal Report Version so It shows the complete address.
    I have checked all the versions from SAP 8.8 PL 13 up to 8.81 PL09 and all only show the first line of the address for the customer.
    Any suggestions would be greatly appreciate as to how I could get them in.
    thanks
    Paul

  • Zero-Balance clearing account - account determination

    Hi all
    For the different accounting principle (US GAAP / IAS and so on) we do not use the ledger solution, we use the account solution.
    There numbering for the accounts is as follows:
    xxxx00 accounts for all accounting principles
    xxxx01 accounts for US GAAP
    xxxx02 accounts for IAS
    xxxx03 accounts for local GAAP
    In the same way, we set up the cost elements for assessment (e.g. 920'003) and the corresponding GL-account for the backward integration from CO -> FI (e.g. 930'003).
    Requirement:
    For the profit center, the must be establised a complete balance sheet and P&L statement. This for all 3 accouting priniples.
    Means we need a complete P&L statement und balance sheet per profit center for US GAAP, IAS and local GAAP.
    Problem:
    As soon as a cross profitcenter assessment is done in the CO-OM (form cost center A to cost center B), there is a booking on the zero-balance clearing account.
    In the customizing you can just set one single zero balance clearing account (in our case 199'990). But for a correct setting up of the 3 accounting principles we should be able to customize different zero-balance clearing accounts:
    Example:
    in CO-OM (cost center assessment)
    Profitcenter A: -100 cost element  920'003
    Profitcenter B: +100 cost element  920'003
    in FI-module (backward integration CO to FI):
    Profitcenter A: -100 GL account 930'003 -> ok
    Profitcenter A: +100 GL account 199'990 -> Problem  -> should be 199'993
    Profitcenter B: +100 GL account930'003 -> ok
    Profitcenter B: -100 GL account 199'990 -> Problem  -> should be 199'993
    If you could set up different zero balance clearing accounts, then you could print out the balance sheet and P&L statement in the FI module per profit center as follows:
    US-GAAP:  accounts xxxx00 and xxxx01
    IAS:            accounts xxxx00 and xxxx02
    local:          accounts xxxx00 and xxxx03
    Swiss GAP FER: xxxx00 und xxxx01 Konten
    Steuer: xxxx00 und xxxx02 Konten
    kalkulatorisch: xxxx00 und xxxx03 Konten
    Thanks very much for any input.
    Pius

    Dear,
    If I understood your requirement correctly then you want different ZERO balance clearing GL Account for below type  GL Accounts
    xxxx00 accounts for all accounting principles
    xxxx01 accounts for US GAAP
    xxxx02 accounts for IAS
    xxxx03 accounts for local GAAP
    Please correct me if I am wrong. If correct then you can post accounting entries to different GL Account by using Substitution OBBH. You have to decide the pre-requisite and on the basis of that you can write the substituon.
    Hope this helps.
    Br,Vivek

  • Unable to view entries in FAGLL03 for Zero Balance Clearing Account

    Hi experts,
    We are facing a unique problem. We are not able to view the line items of the Zero Balance clearing account. The master data of the G/L has been activated for line items but still the display of the items is not happening. I am getting the foll message:
    Account 19900000, company code 1100 is clearing account
    Message no. MSITEM111
    Diagnosis
    You have stored account 19900000 in company code 1100 as a clearing account. At the same time, you use line item management with this account.
    System Response
    Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
    Procedure
    Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.
    Regards,
    Sateesh

    Hi
    In splitting case you need not the give the line item display tab for Zero Balance Clearing Account.
    Just remove that line item display in FS00 for Zero Balance account. You could be able to see the entries in FAGLL03
    Regards
    Sandeep

  • Customer statement per date

    Hi Gurus,
    Client required customer statement on particular date not period wise. i have got customer period wise balances in table KNC1 & KNC3. but i required the date wise opening & closing balance?
    In SAP i have got the table carry forward balance as period wise.
    I have to carry forward the particular date closing balance to the next date as opening balance. please suggest me the table & field  which help me to work out this issue?
    Warm regards,
    Dhananjay Rahane.

    Hi
    You can get this in standard report, through the report for customer line items in Local Currency. The same is available under Information System in AR under Line item Reports. If that does not suffice your reporting requirements, you can pick the data from FAGLFLEXA (Only if you are on New GL) and BSEG combination. Take help of you ABAPER for the same.
    Regards
    Sanil Bhandari

  • AR - Customer Statement - differences when compared with the Aging report

    I am running the customer statement (the Print Statement program) 'as of date' say 11-Jun-09, and found that the 'Total Amount Due' for a customer is not agreeing back to the balance displayed on the Aging Screen (Navigation: Collections -> Customer Accounts [Aging butto]) for the customer.
    The 'Total Amount Due' on the statement is greater than the balance on the aging report/screen.
    It appears that the statement is selecting more receivables transactions (invoices, credit note, payments etc...) than the aging report is looking at. Also the aging buckets on the statement does not tie back to that on the aging screen /report for example the '4 Bucket Aging Report'.
    My questions are:
    1, Is it possible for the 'Total Amout Due' on the statement to differ from the balance on the aging report/screen?
    2, What factors or reasons might cause the above senario to occur?
    3, How can one start to investigate this in order to account for such differences?
    Ideally what I would like to do is run a sql script that will show what is being selected for the statement 'as of' a particular date for a customer, and another sql that will show the same customer account balance and aging buckets at the same 'as of' date.
    And perhaps another sql that would show the same customer open receivable transactions.
    Thanks.

    Hello.
    This query will show you the customer open receivable transactions:
    select c.customer_name,
    decode(ps.class, 'PMT', 'Payment', 'INV', 'Invoice', 'DM', 'Debit Memo', 'CM', 'Credit Memo') Type,
    ps.trx_number,
    ps.trx_date "Inv Date",
    ps.due_date "Due Date",
    ps.acctd_amount_due_remaining "Amount Remaining"
    from ar_payment_schedules_all ps,
    ra_customers c
    where c.customer_id = ps.customer_id
    and ps.status = 'OP'
    and ps.org_id = &orgID
    and c.customer_number = &CustNumber
    Octavio

  • HT201359 I was using a prepaid MasterCard, the card now has a zero balance. I an unable to download any free games? How do I delete the card from my pay method so I can down load free apps?

    I used a prepaid MasterCard as my pay method, the card now has a zero balance. My I pad will no longer allw my to download free apps because my pay method is invalid?  I can't delete the paymethodwith out putting in a new one?  How can I download free ps

    Changing Account Information
    http://support.apple.com/kb/HT1918
    If necessary Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Problem with document splitting and zero balance clearing account

    Hi SAP Gurus,
    We've already configured the document splitting functionality in our project, however we still encounter some issues with the outcome of posting documents. For some scenarios, the document split functionality seem to work. Below is such example
    Scenario # 1
    Entry View:
    40  Expense (cost ctr 0001)
    31  AP
    GL view:
    40 Expense (cost ctr 0001)
    31 AP (cost ctr 0001)
    However, whenever 2 GL items are included in the document, the document split functionality acts differently.
    Scenario # 2
    Entry View:
    40 Expense # 1 (cost ctr 0001)
    40 Expense #2 (cost ctr 0002)
    31 AP
    GL view:
    40 Expense # 1 (cost ctr 0001)
    40 Expense #2 (cost ctr 0002)
    31 AP (no cost ctr assignment)
    40 Zero Balance Clrg  (no cost ctr assignment)
    50 Zero Balance Clrg (cost ctr 0001)
    40 Zero Balance Clrg (no cost ctr assignment)
    50 Zero Balance Clrg (cost ctr 0002)
    I was just wondering how come the AP item did not split accordingly to the cost center indicated in the entry view. Can anyone please assist me on this one? Thanks in advance and best regards.

    Hi Milind,
    Thanks for the reply.
    I've done the below configuration and assigned cost/profit center update. It now works for profit center split. It still does not split accordingly per cost center though.
    SAP Customizing Implementation Guide > Financial Accounting (New) > Financial Accounting Global Settings (New) > Ledgers >Ledger > Assign Scenarios and Customer Fields to Ledgers
    In the below configuration, cost center is not an available option. Unlike the profit center which is available here.
    SAP Customizing Implementation Guide > Financial Accounting (New) > General Ledger Accounting (New) > Business Transactions > Document Splitting > Define Document Splitting Characteristics for General Ledger Accounting
    The profit center split looks fine now, however the cost center split still is only reflected in the expense items and not on the AP item.
    Any ideas on how to actually split the AP line items according to the cost center assignments ?
    Edited by: Patrick on May 9, 2011 7:46 AM

Maybe you are looking for