Zero priced components missing!!!

Hello guys, I have recently purchased a Cisco 5596 Nexus switches,  6248UP fiber interconnect and Cisco UCS chassis including the Blade servers  for Cisco UCS implementation. When I placed the order to buy the  equipments, I have included these zero priced equipments in the request
               1.   UCS-FI-DL2, UCS 6248 layer 2 daughter card
               2.   UCS 5108 blade server chassis FW package N20-FW010. But when the equipments are delivered, I couldn't find these cards. I have tried to understand their importance but I couldn't find it listed anywhere. Plus I would really appreciate if any one tells me why I couldn't find these equipments in my package.

Hello Biruk,
The UCS-FI-DL2 card is installed by default in the 6248.  This card is the mainboard controller which can be identified by  physical mgmt0, L1/L2, console ports on the PSU side of the system.
N20-FW010 is UCS firmware which can be downloaded from Cisco.com.  I'm not sure why they include it as a line item in the order.
Matthew

Similar Messages

  • How to correct the error in ZERO priced items?

    Hi,
    We created a zero priced material in CRM 4.0.. we classified it as 0PR0 but with an amount of '0.00'. The problem is when we try to use it on a transaction, it will give us a dump message. Another problem is, it does not happen always. Sometimes it gives us the dump error but sometimes not.
    Please help.
    Thanks! Ü

    Hi
    In You case cash Flow to further doc is not happening contact your Fi Consultant
    Venkat

  • Cucm DRS backup components missing 8.6(1a)

    hi,
    we are in the process of migrating to latest 10 version.  the current version is 8.6(1a) CUCM.  I tried build the customer exact environment in the lab (same ip/dns .same version of cucm..etc)...finally when I brought the backup to the lab to restore to this newly built cucm, I noticed the cucm drs components which will be listed on the Disaster recovery restore wizard after the tar file has been accessed, missing few components.
    for example, in ideal situation you will see the components car,cdpagt,syslogagt,ccmprefs,bat,platform,tct,ccmdb,clm,tftp,moh,ann, reporter. (see attached pic, "supposed to see") but my situation
    cdpagt,reporter,bat,tftp,cef,ann,moh components are not shown.  thus when I initiate the restore, it fails.  this is not to say that customer may have not given all the backup files. I was there when I dragged and dropped in my pc.

    resolved it.
    all we need to do is deactivate and reactivate the services for the missing components.  for ex. if tftp component is missing then we will have to deactivate and reactivate.  go to DRS page and check to see if that shows up as component being backed up.. it will show up. I found a bug for this version.  but the details of it does not tell you about all the components missing on mine. it only shows tftp component missing. with work around being the same.
    thanks
    vijay

  • Itunes components missing :(

    i updated itunes and it now says components missing -42404 and i have completely uninstalled and reinstalled with the same problem 3 times can anybody help me as i now cannot retrieve my music through home share with my sister and my iphone cant be detected

    download iTunes from here:http://www.apple.com/itunes/download/ and save the intunessetup.exe or itunes64setup.exe file depends on your operating system.  Unzip the file with Winrar program and right mouse click AppleSoftwareUpdate.msi to install ASU.

  • Zero pricing for packaging material

    Hi All,
    I have one scenario, In sales order there are two line items one is standard item and second one is packaging material.For second item I don't want to  maintain price,that means zero pricing.Is there any solution for this.
    Regards,
    Hari Challa.

    Dear Hari,
    You define new item category for the packing material through VOV7 transaction.
    In the item category detail screen you maintain Pricing field as Blank - NO pricing under Business Data tab.
    Do the itemcategory determination for the new itemcategory VOV4 transaction with the packing material itemcategory group+sales document type.
    Now system will not consider price for the packing material.
    I hope this will help you,
    Regards,
    Murali.

  • Photoshop 2014 receive error  message saying components missing. I  deleted  app as requested, how do I reinstall ? Its is not I'm my creative cloud to do so?

    Photoshop 2014 receive error message saying components missing. I deleted app as requested, how do I reinstall ? Its is not I'm my creative cloud to do so?

    This might help...
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    -Noel

  • Billing Document Error - Mandatory pricing Condition Missing

    Dear Gurus,
        We created a sales order for job work for service material and it asked the pricing condition job work price (ZJOP), so pricing condition maintained, in VF01 error is coming Mandatory pricing condition missing  (ZBPR).
    Regards,
    Vasant

    Hi,
    First check the sales order is complete.Click on incompletion log.If its complete then try the following
    To check the settings for billing type T code is VOFA. Here you can check the document pricing proc only. If its is showing fine
    in sales order and not billing then check your copy control T code VTFL. Check what is the pricing type for item category.
    Edited by: scm.sd on May 9, 2011 1:45 PM
    Edited by: scm.sd on May 9, 2011 1:50 PM

  • Installed PS, used once, now 'components missing'. How do I reinstall?

    I downloaded PS, then used it.  It started immediately and seemed to work fine. Saved and closed application.  Attempted to use again and got message 'components missing' then 'reinstall program'.  Application Manager no help, says all is fine.
    So, now I look for help and end up in a forum instead of getting help from Adobe for their program which I paid for.  Who knows how long I'll be down.  Seems a poor system!!
    Congodog

    Which operating system are you using?  Have you tried removing Photoshop and reinstalling?  If so what process did you go through to remove Photoshop?
    Finally you are welcome to contact our chat support at http://adobe.ly/yxj0t6.
    If you are looking for phone support then please go to http://www.adobe.com/ and choose Help>Contact Us.   After choosing the correct options for your inquiry you will be offered the proper support phone number for your Country/Region.

  • Core Audio Components Missing After Clean Install and Update to 10.3.9?

    I did a clean install of 10.3.x onto my hard disk and then updated to 10.3.9 through Software Update.
    Before this install I'd been running 10.3.9 (my disk crashed -- or so I thought -- hence the re-install of all above). I'd been running a music recording program and taking advantage of Apple's Core Audio AU components (e.g. AUDelay, etc), which should be in /Library/Audio/Plug-ins/Components/ or something like that. Now they are missing entirely.
    How do I get them back? Where are they to find?
    Thanks!

    It was a problem with the 3rd party software -- I hadn't run the installation update to interface with the AU Components -- after the reinstall. Thanks.

  • Kona Components missing.

    I had some work done to my G5 and when I got it back up and running, FCP is telling me that I do not have the proper codec/hardware installed for my timeline settings.
    I have a Kona LH card installed, and was previously running all of my timelines in uncompressed 8bit. This option no longer exists in my FCP sequence settings, only 3 10bit compressors. In the Kona control panel, under info, it reads this for /library/quicktime:
    MISSING! - FCP Uncompressed 422.component
    MISSING! - DVCPROHDCodec.component
    So my question is this: How do I recover these lost quicktime components so my Kona card will talk to FCP and allow it to use an uncompressed 8bit setting?
    I have tried reinstalling/updating the Kona software and tried reinstalling Quicktime.
    Thanks!
      Mac OS X (10.4.3)  

    I'm not an expert on this, by any means, but last week I got the same "do not have the proper codec/hardware." Scary. This was after I had borrowed a Kona card for a few days to import from HDcam, then removed the card to return to its owner - the Kona software remained. I could no longer open any of my 720p timelines or import P2 files. Tried reinstalls of Final Cut, and Quicktime - no luck. Finally got timelines to open again after doing a clone of everything - OSX, Final Cut, and Quicktime from a cloned backup I made before the Kona card use. This working version now has no Kona drivers or plug-ins or anything. You want your Kona, so I don't know if this is a help, but it seemed that the order of the reinstalls and possibly the OSX had something to do with plug-ins and the folders in which they were installed. Maybe try a reinstall of OSX, then Final Cut, then Quicktime, then Kona. But this is a lot of work and you may want to wait for another more expert opinion.

  • DP90 pricing date missing in DMR item data

    Background:  Im implementing sales pricing discounts for sales orders generated from service orders via RRB.  Currently, we create service orders to capture costs then use RRB (DP90/DP95) to create DMR documents to bill customers for the services.  Costs are transferred to DMR as condition types EK01 actual costs.
    Issue:  In DP90/DP95, if I leave the pricing date blank..the DMR creates with a blank item pricing date.  The DMR header pricing date is populated with current date.  Since the item pricing date is blank, the system does not find the discount condition records.
    F1 help on the DP90/DP95 field says "If you want to use the internal date determination facility in SD, leave the field empty."
    If I create the DMR manually in SD, the pricing dates determine correctly...nothing remains blank.  Our SD doc type config uses a "blank" for the pricing determination (current date).
    My concern is that end users will forget to enter the pricing date in DP90/DP95 resulting in the customer being overcharged.  Are we missing config somewhere?  As an alternative, is there a way to make the pricing date on DP90/DP95 a required field? Since this only happens from DP90/DP95...Im trying this forum first. 
    All help is greatly appreciated.
    Allison

    Hi,
    Make it required field on initial screen of DP90 by screen & transaction variant
    T-code SHD0
    Put t-code DP90 and click on tab screen variant and maintain below
    Screen variant       ZDP90
    Program              SAPLVPK_GUI_INTRO
    Screen               300
    Then click on create button then initial screen will appear then click on expenses or sales price then FILED SCREEN will pop up
    Make PRICING DATE as REQUIRED and click on exit & save again save it.
    Come back and click on tab TRANSACTION VARIENT
    Put Transaction Variant - ZDP90 and click on change icon
    put screen variant ZDP90 enter and save
    If you want test is then test by clicking TEST (F8)
    Now assign this transaction varient in SE93
    Put Transaction Code  -  ZDP90 and click on create
    Then enter short text and select option 4 i.e TRANSACTION WITH VARIANT
    Then enter
    Transaction             DP90
    Transaction variant     ZDP90
    And save
    Now instead of DP90 use ZDP90 in this pricing date will appear as required field.
    Kapil

  • MAX Reports-Initialization Error, Editing Components missing?

    Using a NI PXI-1042Q and an 4472B Daq card to capture data.  Running LabVIEW 8.2 on a Windows XP system.  The program controls an MID7604 which controls a motor.  Using a program that was written and is now an executable.  To run the program minor file related inputs are required, the motor moves to calibrate its' position, then a test piece is requested to be adjusted.  After the adjustment, file request information is acknowledged (location for data to be placed is ok'd). 
    After pressing OK, the following error message is generated: 
    [ ERROR-200428 occurred at DAQmx Start Task.vi, Possible reasons: Value passed to the Task/Channels In control is invalid.  The value must refer to a valid task or valid virtual channels, Then it identifies the Task Name: __________.] 
    This of course refers to the Task/Channels IN input of the DAQmx Start Task.vi, which points to the task that was setup, not being setup properly or not there.  In our case, it was there and has somehow been removed.
    When going to MAX and trying to setup a new Task:  Data Neighborhood --> Right Click --> Create New NI DAQmx Task,
    the following message is generated:
    !INITIALIZATION ERROR
    Some components required for editing are missing.  Please contact National Instruments for more information. 
    We have already viewed the NI-DAQmx Error-200428 message, and also tried the "How Do I Recover From MAX Database Corruption?" procedure, no change. 
    Please respond. Thanks.

    Typically with an executable you only have the run-time versions and I don't think you can create a task with just the run-time. Somehow the hardware configuration has been corrupted. If you can find the original .nce file that was used on the development system, you can just import that I believe. Otherwise, you may have to install full versions of DAQmx.
    The reliance of existing tasks in MAX is one reason that I avoid them and create everything in the LabVIEW program. Just one thing to keep in mind.

  • Question: Photoshop application components missing

    After installing Photoshop via Creative Cloud on a Mac, I now am getting the message :  "Some of the application components are missing from the Application directory, Please reinstall the application. "
    Could someone please give me simple instructions on how to do this?
    THANK YOU!!

    What is the specific error message you are receiving?  What operating system are you using?  Did you receive any error messages during the installation process?

  • Standard ESS components missing!!!

    Hi Experts,
    I am working on ESS components in WD ABAP. But there is a problem the standard ESS componets for travel and expense which strats with prefix  FITE are missing in Sandbox system and production system. But these components are available in development system. What could be the reason for it and the preffered solution in this case. Please help.
    Regards,
    Vaibhav Tiwari.

    Hi,
    Make sure the FITE* and FITV* services are activated in transaction "SICF" under the path:  default_host --> sap --> bc --> webdynpro --> sap.
    Let me know if that helps.

  • Ipad components missing

    Hello
    I sent an ipad off have screen fixed, its come back unrepaired saying theres a fault and now bits are missing, can i ask from this picture what is missing please?

    There are no user serviceable components in an iPad. Contact whoever you sent the iPad
    to for assistance in resolving the matter. Hopefully you have been dealing with Apple
    or an Apple authorized service provider.

Maybe you are looking for