ZFS/ZPool reports incorrect sizes? Missing space?

I am currently setting up a ZFS Fileserver comprised of 750 GB drives, but I am confused about what zfs list and zpool list report for sizes.
bash-3.00# zpool create tank mirror c3d0 c4d0
bash-3.00# zpool list
NAME SIZE USED AVAIL CAP HEALTH ALTROOT
tank 696G 90K 696G 0% ONLINE -
bash-3.00# zfs list
NAME USED AVAIL REFER MOUNTPOINT
tank 87K 685G 24.5K /tank
What "format" reports for the two drives, c3d0, c4d0:
2. c3d0 <WDC WD75- WD-WCAPT044073-0001-698.63GB>
/pci@0,0/pci-ide@5,1/ide@0/cmdk@0,0
3. c4d0 <WDC WD75- WD-WCAPT044003-0001-698.63GB>
/pci@0,0/pci-ide@5,1/ide@1/cmdk@0,0
So.. 698.63 GiB is how much it SHOULD be.. but "zpool list" shows 696 GiB, and "zfs list" shows 685 GiB.
This difference of 2% scales up as well, it's only 13 GiB in this setup, but with 12 x 750 GB drives it becomes around 200 GiB which is just "missing".
I've searched all over for things like zfs overhead or reserved space but I can't find anything (except for the zfs reservation property, which is set to "none").
Can anyone shed some light on this?

liquidx wrote:
I am currently setting up a ZFS Fileserver comprised of 750 GB drives, but I am confused about what zfs list and zpool list report for sizes.
bash-3.00# zpool create tank mirror c3d0 c4d0
bash-3.00# zpool list
NAME SIZE USED AVAIL CAP HEALTH ALTROOT
tank 696G 90K 696G 0% ONLINE -
bash-3.00# zfs list
NAME USED AVAIL REFER MOUNTPOINT
tank 87K 685G 24.5K /tank
What "format" reports for the two drives, c3d0, c4d0:
2. c3d0 <WDC WD75- WD-WCAPT044073-0001-698.63GB>
/pci@0,0/pci-ide@5,1/ide@0/cmdk@0,0
3. c4d0 <WDC WD75- WD-WCAPT044003-0001-698.63GB>
/pci@0,0/pci-ide@5,1/ide@1/cmdk@0,0
So.. 698.63 GiB is how much it SHOULD be.. but "zpool list" shows 696 GiB, and "zfs list" shows 685 GiB.
This difference of 2% scales up as well, it's only 13 GiB in this setup, but with 12 x 750 GB drives it becomes around 200 GiB which is just "missing".
I've searched all over for things like zfs overhead or reserved space but I can't find anything (except for the zfs reservation property, which is set to "none").
Can anyone shed some light on this?Your math is errant for starters.
698.63 - 696 = 2.63, not 13.
The percentage is about 4/10 of one percent (2.63/698.63 = .0037---). Move the decimal place two to the right for a percentage value.
Scaling 2.63 (lost) to 12 drives ~= 31 GB.
Any other questions?
Cheers,

Similar Messages

NSS Volume reporting incorrect size

Hi
I have an NW65 SP7 Server, with an NSS volume USERS. According to iManager it is 292GB, with 184GB available, but Windows sees it as 230GB with 121GB free. At least they both agree roughly on how much used space there is...
I tried allowing the volume to grow to pool size, and now it says
Quota: 0.00 MB
Available Space: 313143.27 MB
Used Space: 111584.32 MB
Purgeable Space: 30065.82 MB
But windows still sees the same space. Any idea what's going on there, and how I might fix it?
TIA
Jase

If this server used to be a 6.5 SP5 server, you may need to rebuild the volume with the following command - nss /poolrebuild=<poolname> /purge. There was an issue in the earlier versions on how information was reported. Also, you may want to check to see if there is a newer mm.nlm than the one you are using.
jgray

FRSM Randomly Reports Incorrect Quota Usage

We are using Server 2008 with FSRM 6.1 and are randomly seeing some quotas reporting incorrectly that they are at 100%. If the folder is checked they are well under the quota but FRSM still reports it as 100% even after a refresh.
The only way that I have seen the quotas reporting as normal is when we delete them and recreate them but it returns a few weeks later.
This is only happening on one file server (we have several that FRSM manages the quota allocations for) and disk compression has not been turned on for that volume. This also is not happening to every quota on that volume, only some.
Any ideas?

Hi,
Firstly, please refer to the thread to check if the disk usage of the folder is reported correctly:
Server 2008R2 reports disk size/free space incorrectly in explorer and disk manager
http://social.technet.microsoft.com/Forums/en-US/bf5445d5-e796-4cbb-9571-8639b900cfd4/server-2008r2-reports-disk-sizefree-space-incorrectly-in-explorer-and-disk-manager?forum=winserverfiles
Then check if your current account have permissions to access subfolders. If the user does not have permission to access all subfolder. The size of some folders will not be counted with right click on a folder.
FSRM usage quota incorrect after deletion of 'RECYCLER' folder
http://social.technet.microsoft.com/Forums/en-US/4a076bd3-6e84-4392-9d1a-d93e67a9c319/fsrm-usage-quota-incorrect-after-deletion-of-recycler-folder?forum=winserver8gen
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Tiger reporting hard drive free space incorrectly.

A client of mine has an iMac G5 running Tiger. For some reason it is reporting the free drive space as incorrect.
I have run all of the common utilities (fsck, repair, etc.) and still not solved.
The drive is a 160 GB and it show only 3 GB free.
Any ideas?
PowerMac G4 & iBook G3 Mac OS X (10.4.2)

This may happen sometimes if:
1. You use Carbon Copy Cloner and force quit a clone before it is finished. It will leave something behind in Finder's Go menu -> Go to Folder -> Enter in the field:
/Volumes/
and click on Go.
2. This may happen if you have an old version of the MacAlly iShock drivers. There was a situation where its logfiles would suddenly grow exponentially.
Those are two things I'm aware that leave behind huge piles of debris that don't clean up after a restart.
Burning CDs and DVDs if interrupted may leave behind large temporary files, though I don't know where that would be, and typically when you restart the computer that clears up.
It may be possible that your client accidently hit the Duplicate keyboard shortcut (command-D) while having a very large folder selected, thus actually making himself twice as big a folder somewhere. Use the program Whatsize to determine where the largest data source is:
http://www.id-design.com/software/whatsize/index.php

Encore is Reporting incorrect Blu-Ray Project size/length

Hello,
I've exported a 45 minute Premiere project into mpeg-2 bluray, and the file is about 10 gb. When bringing into encore and creating a timeline, the video is correct, but audio track is about 15 times longer than the video, and reported project size is 215gb.
I can play the file correctly in media player and premiere - any ideas?
Thanks a million,
Jonathan

Jonathan,
You've covered a lot of ground since my last post!
You should be able to see the issue in Pr - I can.
Try playing the H.264 file in either Quicktime player (if you have it installed) or KMPlayer (my favorite "free" player). If you don't see artifacts there, then the MC keyframe issue is not the problem.
You should try CBR and any other parameter variations you can think of - that's what I'm doing here. In my tests, moving the keyframes closer together just results in more frequent artifacts. But that can be a good thing when you're testing. I'm still researching this issue.
For your tests, make sure you are using unique file names each and every time you export from Pr; otherwise En will get very fussy and start giving you errors.
Also, while testing different file lengths and encoding schemes, you should be using a dedicated test project in En. Don't go anywhere near your real project.
Please heed Jon's advice and use a BD-RE for all of your test burns to disc. As he does, I test disc images by mounting them with SlySoft's VirtualCloneDrive (also free).
What is your source material in Pr? Is it some form of 24p or 24pa HDV? Is it any form of 24p? If so, make sure it's interpreted correctly in Pr, and then make sure that En interprets the MPEG2 output from Pr correctly.
-Jeff

ZFS-Zpool shows 100% ful

I'm new to ZFS and I have a situation where one of the filesystem is ecc6quality shows 100%.full
It is configures in a ZFS pool, which is 1.2TB in total
root@solarisparent2:/# df -h
Filesystem             Size   Used Available Capacity Mounted on
rpool/ROOT/solaris     547G   3.8G       443G     1%    /
/devices                 0K     0K         0K     0%    /devices
/dev                     0K     0K         0K     0%    /dev
ctfs                     0K     0K         0K     0%    /system/contract
proc                     0K     0K         0K     0%    /proc
mnttab                   0K     0K         0K     0%    /etc/mnttab
swap                   4.1G   2.6M       4.1G     1%    /system/volatile
objfs                    0K     0K         0K     0%    /system/object
sharefs                  0K     0K         0K     0%    /etc/dfs/sharetab
fd                       0K     0K         0K     0%    /dev/fd
rpool/ROOT/solaris/var
                       547G    18G       443G     4%    /var
swap                   4.1G   184K       4.1G     1%    /tmp
rpool/VARSHARE         547G   495K       443G     1%    /var/share
bidev                  1.2T    31K       8.3G     1%    /bidev
ecc6dev                1.2T    31K        29G     1%    /ecc6dev
rpool/export           547G    32K       443G     1%    /export
rpool/export/home      547G    14G       443G     4%    /export/home
rpool                  547G    73K       443G     1%    /rpool
ecc6quality            1.2T    31K         0K   100%    /ecc6quality
root@solarisparent2:/# zpool list
NAME          SIZE ALLOC FREE CAP DEDUP    HEALTH ALTROOT
bidev        1.20T 1014G 210G 82% 1.00x DEGRADED -
ecc6dev      1.20T 1.01T 192G 84% 1.00x    ONLINE -
ecc6quality 1.20T 1.04T 155G 87% 1.00x    ONLINE -
rpool         556G   103G 453G 18% 1.00x    ONLINE -
root@solarisparent2:/# zfs list -r ecc6quality
NAME                         USED AVAIL REFER MOUNTPOINT
ecc6quality                 1.18T      0    31K /ecc6quality
ecc6quality/oracle          1.03T 28.5G 1.00T -
ecc6quality/rootfilesystem 51.6G 43.1G 8.50G -
ecc6quality/sapmntmqs       15.5G 5.07G 10.4G -
ecc6quality/swap            66.0G 59.1G 6.89G -
ecc6quality/usrsapmqs       15.5G   535M 15.0G -
root@solarisparent2:/#
we have istalled one ldom server in this pool but that ldom is working fine, But customer ask why it's showing 100%,kindly help me..
Thanks
Thorana Murugan A

Thanks for update Cindy,
ecc6qualiy is phycial volume, this lun came from storage end and it's configured by RIAD5 in storage level,
oot@solarisparent2:~# zpool status -v ecc6quality
pool: ecc6quality
state: ONLINE
scan: none requested
config:
        NAME                                     STATE     READ WRITE CKSUM
        ecc6quality                              ONLINE       0     0     0
          c0t600C0FF000000000098E5429E0390400d0 ONLINE       0     0     0
errors: No known data errors
root@solarisparent2:~# zpool history ecc6quality
History for 'ecc6quality':
2013-10-04.15:17:36 zpool create ecc6quality c0t600C0FF000000000098E5429E0390400d0
2013-10-04.16:56:49 zfs create -V 50gb ecc6quality/rootfilesystem
2013-10-05.11:56:30 zfs create -V 64gb ecc6quality/swap
2013-10-05.12:08:23 zfs create -V 1024gb ecc6quality/oracle
2013-10-05.12:11:43 zfs create -V 15gb ecc6quality/sapmntmqs
2013-10-05.12:17:12 zfs create -V 15gb ecc6quality/usrsapmqs
LDOM constarints
root@solarisparent2:~# ldm list-constraints ecc6quality
DOMAIN
ecc6quality
UUID
    dabaf66b-8d71-6213-8c45-a6f2de7f7ca3
CONTROL
    failure-policy=ignore
    extended-mapin-space=off
    cpu-arch=native
CORE
    COUNT:    2
VCPU
    COUNT:    16
MEMORY
    SIZE:    25G
CONSTRAINT
    threading=max-throughput
VARIABLES
    auto-boot?=true
    boot-device=rootqecc6
NETWORK
    NAME             SERVICE                     ID   DEVICE     MAC               MODE   PVID VID                  MTU   LINKPROP
    vnet2            primary-vsw0                0    network@0                           1
DISK
    NAME             VOLUME                      TOUT ID
    rootqecc6        rootqecc6@primary-vds0           0
    swapqecc6        swapqecc6@primary-vds0           2
    oracleqecc6      oracleqecc6@primary-vds0         3
    sapmntqmqs       sapmntqmqs@primary-vds0          4
    qusrsaptrans     qusrsaptrans@primary-vds0        5 (***** this VDISK connect form rpool )
    qusrsapmqs       qusrsapmqs@primary-vds0          6
VCONS
    NAME             SERVICE                     PORT
and ecc6quality LDOM O/P
-bash-4.1$ df -h
Filesystem             Size   Used Available Capacity Mounted on
\rpool/ROOT/solaris      49G   4.9G        35G    13%    /
/devices                 0K     0K         0K     0%    /devices
/dev                     0K     0K         0K     0%    /dev
ctfs                     0K     0K         0K     0%    /system/contract
proc                     0K     0K         0K     0%    /proc
mnttab                   0K     0K         0K     0%    /etc/mnttab
swap                    68G   2.5M        68G     1%    /system/volatile
objfs                    0K     0K         0K     0%    /system/object
sharefs                  0K     0K         0K     0%    /etc/dfs/sharetab
fd                       0K     0K         0K     0%    /dev/fd
rpool/ROOT/solaris/var
                        49G   198M        35G     1%    /var
swap                    68G     0K        68G     0%    /tmp
rpool/VARSHARE          49G   900K        35G     1%    /var/share
/dev/dsk/c2d4s0         15G   9.4G       5.1G    65%    /sapmnt/MQS
/dev/dsk/c2d6s0         15G   5.0G       9.5G    35%    /usr/sap/MQS
rpool/export            49G    32K        35G     1%    /export
rpool/export/home       49G    57K        35G     1%    /export/home
rpool/export/home/daaadm     49G   105K        35G     1%    /export/home/daaadm
rpool/export/home/mqsadm     49G   326K        35G     1%    /export/home/mqsadm
rpool/export/home/sapadm      49G    35K        35G     1%    /export/home/sapadm
oracle                1000G   163G       187G    47%    /oracle
oracle/oramqs         1000G   611G       187G    77%    /oracle/MQS
rpool                   49G    73K        35G     1%    /rpool
oracle/trans            52G    39G        13G    75%    /usr/sap/trans
root@ecc6quality:~# zfs list
NAME                              USED AVAIL REFER MOUNTPOINT
oracle                            813G   187G   163G /oracle
oracle/oramqs                     611G   187G   611G /oracle/MQS
oracle/trans                     38.9G 13.1G 38.9G /usr/sap/trans
rpool                            13.6G 35.4G 73.5K /rpool
rpool/ROOT                       5.35G 35.4G    31K legacy
rpool/ROOT/solaris               5.35G 35.4G 4.91G /
rpool/ROOT/solaris-backup-1       153K 35.4G 2.12G /
rpool/ROOT/solaris-backup-1/var    76K 35.4G   153M /var
rpool/ROOT/solaris/var            318M 35.4G   198M /var
rpool/VARSHARE                    900K 35.4G   900K /var/share
rpool/dump                       6.19G 35.6G 6.00G -
rpool/export                      556K 35.4G    32K /export
rpool/export/home                 524K 35.4G 57.5K /export/home
rpool/export/home/daaadm          106K 35.4G   106K /export/home/daaadm
rpool/export/home/mqsadm          326K 35.4G   326K /export/home/mqsadm
rpool/export/home/sapadm           35K 35.4G    35K /export/home/sapadm
rpool/swap                       2.06G 37.4G    16K -
root@ecc6quality:~# zpool list
NAME     SIZE ALLOC   FREE CAP DEDUP HEALTH ALTROOT
oracle 1016G   813G   203G 80% 1.00x ONLINE -
rpool   49.8G 11.4G 38.4G 22% 1.00x ONLINE -
root@ecc6quality:~# echo | format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
       0. c2d0 <SUN-DiskImage-50GB cyl 1420 alt 2 hd 96 sec 768>
          /virtual-devices@100/channel-devices@200/disk@0
       1. c2d2 <SUN-DiskImage-64GB cyl 1818 alt 2 hd 96 sec 768>
          /virtual-devices@100/channel-devices@200/disk@2
       2. c2d3 <Unknown-Unknown-0001-1.00TB>
          /virtual-devices@100/channel-devices@200/disk@3
       3. c2d4 <SUN-DiskImage-15GB cyl 424 alt 2 hd 96 sec 768>
          /virtual-devices@100/channel-devices@200/disk@4
       4. c2d5 <SUN-DiskImage-30GB cyl 851 alt 2 hd 96 sec 768>
          /virtual-devices@100/channel-devices@200/disk@5
       5. c2d6 <SUN-DiskImage-15GB cyl 424 alt 2 hd 96 sec 768>
          /virtual-devices@100/channel-devices@200/disk@6
Specify disk (enter its number): Specify disk (enter its number):
root@ecc6quality:~#
Thanks
Thoranam

Hierarchy function could not complete coz of missing space

Hi All,
Iam having a issue "<b>Hierarchy function could not complete because of missing space</b>" when iam expanding a hierarchy( with 37k lines) in report, rest of the hierarchies( with 34k, 36k lines) are fine.
Even that hierarchy in question working fine after i refresh query, its giving that problem after few refreshes again.
Can any body please advice me why this one happening like this.
Regards
Robyn.

Hi,
A couple of things I would check here :
Try the same thing using the web and see if the behaviour is the same. This is to elimate that the excel is causing the problem. Second try to observe the system activity in both cases, when its working fine and the other when its not refreshing properly. Hierarchies do tend to take time in reporting depending on the data.
Also check the cache settings and temp table space. You can work with basis to see if the temp table space needs to be extended.
In addition, have multiple users try running the report and check how the hierarchy is behaving.
Cheers,
Kedar

Unable to generate report for size of KM folder

hi all,
i want to generate report for size of folder in KM.I am havingthe following roles content admin,content management,system admin,home, are these roles sufficent to generate report or any roles are needed?
And other issue is after going into Content management role I am clicking reports workset but I am unable to see "Folder Size Calculation" option, any full access are needed to see it.
I am following help.sap link plz don't send it ,give me any other Material.
After starting the Km report in Resource Statistics its showing size as zero.
help me in sloving this issue.
thanks in advance,
Aravind

You could find all KM reports to the given navigation
try all these paths...I am unable to findout your issue definitely permission related
System Administration -> System Configuration -> Knowledge Management -> Content Management -> Related Topics -> CM Repository Reports
Content Administration -> KM Content -> Toolbox -> Reports
Content Management -> Reports
Regards
Koti

PDF Format Oracle Reports font size is not consistent.

My process is generating the batch oracle Reports.
Their key map is:
Key1: %* server=server1 userid=xxxs/xxx@xxxx report=D:\sample.rdf destype=file desformat=PDF
My process is calling IAS server to generate report. IAS server is generating and saving the report in the specified location. The problem is sometimes the report font size is very tiny (especially headers & footers), it is happening for few reports. What could be the reason is there anyway to make sure that always the generated reports font size is good.

it is happening for few reportsSo is the problem that the same reports-module sometimes has the right font and sometimes not, or is there one report which has always the wrong font?

Attribute "Report Layout" is missing in the "Print Attributes" tab for IR

Hallo,
The attribute “Report Layout” is missing in the “Print Attributes” tab for an interactive report?
How to alter the report layout (xsl-fo) of an interactive report?
Has someone any idea where to configure this?
Btw, for the "classic" SQL Report the XSL-FO "Report Layout" can be cahnged in "Print Attributes" and this works fine for me. But I want to change the xsl-fo for the interactive report.
"If you do not select a report layout, a default XSL-FO layout is used. The default XSL-FO layout is always used for rendering Interactive Report regions. ... Unlike classic reports, the Interactive Report Print Attributes can only utilize the default XSL-FO layout and is initiated from the Report Attributes, Download section rather than directly from this screen. Once configured, these attributes only apply only to the current region and cannot be used outside the context of the region."
http://apex.oracle.com/i/doc/bldapp_rpt_print.htm
How can the "default XSL-FO layout" be changed?
Changing is necessary because the Apache FOP 1.0 reports the following error (for the transmitted default XSL-FO):
"fo:simple-page-master", "fo:region-body" must be declared before "fo:region-before"
http://www.w3.org/TR/xsl/#fo_region-before
The default report layout is not saved in:
select * from APEX_040000.WWV_FLOW_REPORT_LAYOUTS
Thx, Willi

I've found two workaround for getting Apache FOP 1.0 to work with Oracle Apex 4.0 for PDF printing of interactive reports:
1, Use an application process to set your custom layout for interactive reports:
[ ] grant all on APEX_040000.WWV_RENDER_REPORT3 to {YOUR_SCHEMA_NAME};
[ ] Create an Application Process e.g. "Custom Report Layout" with constraint for request 'PDF' and Process Text:
declare
v_xsl varchar2(32767);
begin
v_xsl := '<?xml version = ''1.0'' encoding = ''utf-8''?>
<xsl:stylesheet version="2.0"
<fo:region-body region-name="region-body" margin-top="54.0pt" margin-bottom="54.0pt"/>
<fo:region-before region-name="region-header" extent="54.0pt"/>
</xsl:stylesheet>';
APEX_040000.WWV_RENDER_REPORT3.g_prn_template := v_xsl;
end;2, If you have some knowlege in Java change the sequnce of the the nodes in the apex_fop.jsp (or servlet), ie. changing the xsl before you use it for transformation.
The code depends on the solution you are using to parse the xsl string.
Hope this may help someone,
Willi

Report the size of all SharePoint Databases in a text file using PowerShell?

I am new to Powershell. please help me for following question with step by step process.
How to report the size of all SharePoint Databases in a text file using PowerShell?

Hi Paul,
Here is the changed script, which will also include the size for the Config DB.
Please let me know if it worked:
#Get SharePoint Content database sizes
Add-PSSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
$date = Get-Date -Format "dd-MM-yyyy"
#Variables that you can change to fit your environment
$TXTFile = "D:\Reports\SPContentDatabase_$date.txt"
$SMTPServer = "yourmailserver"
$emailFrom = "[email protected]"
$emailTo = "[email protected]"
$subject = "Content & Config Database size reports"
$emailBody = "Daily/Weekly/Monthly report on Content & Config databases"
$webapps = Get-SPWebApplication
$configDB = Get-SPDatabase | ?{$_.Name -eq ((Get-SPFarm).Name)}
$ConfigDBSize = [Math]::Round(($configDB.disksizerequired/1GB),2)
Add-Content -Path $TXTFile -Value "Config Database size: $($ConfigDBSize)GB"
Add-Content -Path $TXTFile -Value ""
foreach($webapp in $webapps)
$ContentDatabases = $webapp.ContentDatabases
Add-Content -Path $TXTFile -Value "Content databases for $($webapp.url)"
foreach($ContentDatabase in $ContentDatabases)
$ContentDatabaseSize = [Math]::Round(($ContentDatabase.disksizerequired/1GB),2)
Add-Content -Path $TXTFile -Value "- $($ContentDatabase.Name): $($ContentDatabaseSize)GB"
if(!($SMTPServer) -OR !($emailFrom) -OR !($emailTo))
Write-Host "No e-mail being sent, if you do want to send an e-mail, please enter the values for the following variables: $SMTPServer, $emailFrom and $emailTo."
else
Send-MailMessage -SmtpServer $SMTPServer -From $emailFrom -To $emailTo -Subject $subject -Body $emailBody -Attachment $TXTFile
Nico Martens - MCTS, MCITP
SharePoint 2010 Infrastructure Consultant / Trainer

Mirrored RAID: MediaKit reports block size error

I am trying to create a 2nd set up backup drives for my photos. I have two new iomega 2TB drives, which look essentially identical to drives I'm currently using as my primary backups as a mirrored RAID set.
I can start the process with freshly erased and reformatted drives (with the default mac format, extended, journaled, unencrypted, not case-sensitive). And after a minute or three, I see
"MediaKit reports block size error, usually caused by not being a multiple of 512."
The RAID options are Mirrored RAID, Mac extended journaled, and options settings are default.
I see several series of posts with complaints about encrypting RAIDs and disk block sizes, but not unencrypted errors. I actually started out trying to do this with the 2006 MBP running 10.6.8 and got a different error: "POSIX reports: the operation couldn't be completed. Operation not permitted." I wasn't sure whether the 2TB RAID I already have was set up iwth the older or newer computer--it was definitely before I put Lion on this one--so I tried this one and now have a different error.
Any idea what the problem might be?

Update: I spent some time on the phone with an Apple support RAID expert, and couldn't figure out what the error was; we couldn't bypass it by playing with partitions on the drives, or any of another couple of manuevers that I've already forgotten. He noted that his own searches were showing a lot of mentions of similar problems but only with Iomega drives, and he was finding the same links I found earlier about problems creating encrypted drives. Now trying to decide if it's worth throwing more good money after bad for a call with Iomega support, and waiting to see if the iomega forum is at all helpful.

REPORT/PROGRAM statement missing, or program type is INCLUDE error upgrade.

Hi Experts,
I have done the recording for FK05 and created functionmodule for the same. But when I use that function module in my custom program or if I try directly execute the FM, I am getting dump like syntax error. So I did syntax check and tried to activate, I am getting "REPORT/PROGRAM statement missing, or program type is INCLUDE error upgrade" error.
Please help me soon to resolve this issue.
Thanks in advance.
Shreyansh

Hi
Goto main function group include name attributes tab and double click.
once the include is opened, try to activate it. if shows errors then fix.
regards
Shiva

How to Change Report Font Size in 11i

Hi,
Please let me know how to change font size of an existing report in Quick steps.
Basically the printed report font size is too small. We change the font size from the printer but still it dose not change.
We have 11i on Unix Server and a dot matrix printer.
The report is character based and Report Builder shows Courier 10, print style is Portrait. We need it to be 12-14.
Thanks!

Hi,
Refer to the following document.
Note: 467568.1 - How To Change The Font, Size, or Page Layout of Standard and FSG Reports
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=467568.1
Regards,
Hussein

Error: REPORT/PROGRAM statement missing , program type is I (include).

Hi,
I have created a REPORT Program (Z Program) and also created a TOP INCLUDE. I am NOT using Function module. When I tried to syntex check the INCLUDE, system is giving
following error:
REPORT/PROGRAM statement missing, program type I (Include).
Can you help me in resolving this error.
Currently TOP include has only one statement to declare a Constant.
Thanks,

hi,
take your program in se80.
double click on the program name. Right click on it and press Activate. All the include will get activated and the problem will get solved.
Regards,
Renjith Michael.
http://www.sourceveda.com/

ZFS/ZPool reports incorrect sizes? Missing space?

Similar Messages

Maybe you are looking for