Abnormal difference in PO price & GR price-urgent

Hi,
I am facing a strange situation where there is a huge difference between the PO price for a particular item & the GR value. There has been no Invoice done for this material.
Initially stock was uploaded through mov type 561 with proper value.
Than after that GR has been done once for this material & there is a huge difference between GR & PO value
The material has Moving average price. When i am cancelling the GR , the price revaluation account is getting hit.
Please throw some light on  the probable reason for the problem...& how to solve it.

Hi,
Go to MR21 and correct the MAP ( moving average price) for that material.
Probable reasons:
Check the currency in purchase order.
If freight value is there then check the currency for the same.
Regards
Kedar
Edited by: Kedar Kulkarni on Jan 30, 2008 12:53 PM

Similar Messages

  • Difference in GR price and goods issue price

    hi all,
    we are facing problem in difference in goodsrecipt price and goods issue price.
    material is maintained with moving average price.
    we do GR  (101) for full month and the last day we do goods issue for some quantities. (201 mvt type)
    while chekcing the material  price, goods issue price is less than the goods recipt price.( total value / total stock )
    what is the possibilities of the difference and where we can identify the changes.?
    price also not updated through MR21.
    regards,
    Vinay

    hi vinay,
    Please check the order prices for the material. Are you purchasing the material from a single vendor or multiple vendors? What is the price that you have maintained for each vendor in the info-records? If you have maintained different prices, the valuation of your material will keep changing with each GR since your material has price control V. During GR, the P.O. price is taken. During GI, the Moving Average price is taken from material master. When you do the goods issue at the end of the month, the Moving average price AT THAT POINT OF TIME  is taken for posting to the Consumption Account / Stock Account. Hence, you will have a difference in the GR / GI values. I suggest, after every GR, you go to MB03. Check the material document and the accounting document. Alongside, look at the Accounting View of the material and note the M.A. price. When you do the GI, note the M.A. price.
    Revert back if not clear.
    Regards,
    Rahul.

  • Why there are big differences in the prices of spare parts (hinge) ..?? particular egypt ibm

    I have Lenovo 3000 N200 0769 with problem in left hinge lcd , the number of it i think (41W5214) 15.4 lcd.
    lenove egypt (IBM) was told to me cost 100 $ but in Many sites (hinge) cost betwen 19 $ , 30$ , 80 $
    i want to understand why there are a big difference betwen prices , and why the ibm egypt is  Highest price...!!!
    i was asked  ibm egypt can replace (Repair) it , if I bought one by my self from internet , but refuse my Request and told to me you must bought it from egypt ibm !!!
    thank you 

    it`s hinge!!!! just Metal hinge !!??
    not hardware like ram or H.d or vga.....etc
    original or not it`s nothing important like other hardware must be original
    if you see the hinge pic (41W5214) you will know what i mean about 80$ differences in the prices
    and
    why lenovo Egypt refuse my Request to replace (Repair) it , if I bought one by my self ??
    the answer is Forced to purchase an Expensive one from lenovo Egypt "kind of business" and customers not important to agree or disagree
    I hope Lenovo tighten the control of the Egypt Branch, with some simplification
    Message Edited by sadzaglol on 03-07-2009 06:40 AM
     I hope Lenovo tighten the control of the Egypt Branch, with some simplification
    Message Edited by sadzaglol on 03-07-2009 06:41 AM

  • PRD-Auto Post price differences to different price difference accounts

    Dear all,
    As I know, in Account Automatic Posting, the transaction key  PRD is for Cost price Difference.
    If I want to post price differences to different price difference accounts in the case of goods receipts for different cost in purchase orders, How can I configure it?
    Example, in PO, there is 2 costs: Freight (F) and Insurance(I) are key in as Condition Type.
    I would like to post price difference from F to account XXX, and  price difference from I to account YYY.
    Can I configure like this?
    Thank you very much for your support!
    Cao Huy

    Hello,
    What is price difference.
    Price differences arise for materials valuated at standard price in the case of all movements and invoices with a value that differs from the standard price. Examples: goods receipts against purchase orders (if the PO price differs from the standard pricedardpreis), goods issues in respect of which an external amount is entered, invoices (if the invoice price differs from the PO price and the standard price).
    Price difference in genereal will not trigger for the materials with price control V ( Moving average price) but however
    Price differences can also arise in the case of materials with moving average price if there is not enough stock to cover the invoiced quantity. In the case of goods movements in the negative range, the moving average price is not changed. Instead, any price differences arising are posted to a price difference account
    For you example, you have you are having PO with Freight (F) and Insurance(I), these are called pallned delivery costs, not Price difference,
    so create two different condition type for Freight and insurance and assign two different G/L accounts for these condition types in account determination.
    While posting system will hit perticular G/L acconut.
    Regards
    Mahesh Naik

  • DIFFERENCE BETWEEN GROSS PRICE, NET PRICE AND EFFECTIVE PRICE

    HI FRIENDS,
    CAN YOU EXPLAIN ME IN DETAIL, WHAT IS THE DIFFERENCE BETWEEN GROSS PRICE, NET PRICE AND EFFECTIVE PRICE WITH A GOOD EXAMPLE.
    REGARDS.

    Hi,
    Example: Material Price is Rs.1000/-
    & Discount is 10% and tax is 10% and freight is Rs.50/-,Fixed( it may also %)
    So Here the Material Price is called Gross Price Rs.1000/-
    Gross Price (Rs.1000/-) – Discount {Rs100/-(10% of Rs.1000/-)}= Net Price Rs.900/-
    Here Net Price Rs.900/-
    Tax Rs. 90/- (Rs.900/- +Rs.90=Rs990/- is called sub-total)
    Freight Rs. 50/-
    Rs.1040/-
    The Total Price (Rs.1040/-) is called Effective Price.
    Note:
    1) Total value = total quantity x price
    When a price changes, the value of the stock changes, since the value is calculated from the price:( its also depends on price Control)
    2) Effective (actual) price: Net price minus cash discount and plus miscellaneous provisions and delivery costs as well as non-deductible input tax.
    Regards,

  • MM60 Price - Urgent

    Hi all,
    I have a material UQFGFC20-B01. When i see that material price in MM60, it shows 63.
    I saw BOM of that material in CS03 and note down all materials. then i note down mm60 prices of all raw and packaging materials and add them. the sum is 59.
    why there is a difference between mm60 price of a material and the sum of mm60 prices of all raw materials used for that material??
    Please respond.
    Regards,
    Aisha Ishrat
    ICI Pakistan Ltd.

    Hi Al,
    Price that you see in MM60 comes from material master. If you use standard price you can set it via costing, you can set it manually.
    If it wasn't set properly it can occure that the total price of raw materials in your materials BOM is higher than the standard price that was set in mmr. (you have to consider other costs as well, e.g. labour costs through routing or subcontracting fee, etc)
    Please check in mmr history (MM03 > menu > Environment > Display changes) through which transaction it was set (e.g. CK40N, MM02).
    BR
    Csaba

  • Hi All difference between abap and hr-abap urgent pls

    Hi All difference between abap and hr-abap urgent pls

    Hello,
    To add to the above points regarding infotypes
    Infotypes stand apart in  HR and manage a volume of data in HR domain..they are unique to HR module ranging from basic employee information to time management and finally the custom infotypes.....
    Payroll and other monetory activities related to an employee also form a vital part of the HR module....
    while considering Reports..in HR data is mainly with respect to infotypes and the concept of PAKEY...7 key fields which uniquely defines any record in an infotype is used..with Pernr(employee number),Begda(begindate) and Endda(enddate) form an integral part of the key..Based on the time constraints(1,2,3) of an infotype the keys are judged (to retrieve data from an infotype)
    In ABAP HR we also have lots of predefined function modules that can be used..eg:go to se37..put 'HR*' and press F4...
    finally to update an HR infotype record we use the function module hr operation rather than direct updates...also there are standard audit trail reports that monitors various activities such as insert/modify/delete operations on an hr infotype record...
    Pls revert back for clarity and reward if helpful
    Regards
    Byju

  • Report on difference between PO price and Material standard price

    Hi,
    We need a report on Purchase price difference, which is report showing Open PO price & Material standard price, if there is a price difference
    This need to be run every day to avoid buyer changing price at PO level unless there is a valid reason
    Similarly difference if any between Schedule agreement price & Material master standard price
    Please help

    Hi,
    There is no standard report available for this.
    You need to develop one.
    Considering your requirement, it can be achieved with a query as well provided you do not need complex functionality out of the report.
    Hope this helps.

  • Foreign Exchange difference posted to price difference account at MIGO

    Hi,
    We have a problem regarding posting foreign exchange rate difference at the time of GR.
    We are costing materials at the beginning of year, and purchases made during the year as per PIR will result in legitimate price difference which is posted to price difference account.  Thatu2019s working alright.
    Now, due to new business requirement, we maintained PIR in MXN (Mexican peso), & standard cost is converted in local currency USD as per exch. rate maintained in OB08.
    Now, when we do GR, the difference of foreign exchange at the time of Std. cost & GR date is posted to Price difference account instead of foreign exchange account.  For eg. Std .cost of material A is 1000 MXN, and GR cost of material X is also 1000 MXN, however corresponding USD is different because of different foreign exchange rate.
    Will appreciate if someone can suggest on how can we post it to exch.rate diff.account instead of price diff. acct. ?
    Thanks,
    Nirav

    Hi,
    Thanks for your replies.
    We have already maitained exch.rate GL OBYC-KDM, which is successfully posted with the exch.rate diff.arising out of GR & IV at the time of IV.
    I'm talking about price difference in Std. cost & GR value because of exch.rate diff.
    For example, Std cost for Material A is 1000 MXN converted to $100 with exch.rate of 10. Now, GR happens with 1000 MXN converted to $200 with prevailing exch.rate of 5. Please note that std. cost and GR is the same price 1000 MXN, but USD amount is changed resulting $100 gets posted to PRICE DIFFERENCE Account, whereas we want to post it to FOREIGN Exch. diff.A/c becuase it's arising out of exch,rate difference.
    Please let me know if it makes sense.
    Thanks,
    Nirav

  • Refund for difference in CD price

    I purchased a CD on Nov 21 for $10.99 and today (11/27) it's $6.99!  How do I get a refund for the difference???

    I don't think you can.  That's how the market works.  Maybe some stores offer a price drop guarantee but at best it's only for maybe 30 days and it isn't the case with anything Apple sells as far as I know.  At best with some hardware you can return it within a time window and then buy it again at the cheaper price I guess.  You're talking about an album though and iTunes Store sales policy is all sales are final.

  • Difference in PO price

    I  have got an issue,
    In interface the current Net price  is $27,788.41 but SAP Value for same order is $28,077.84.
    So difference is $ 289.43, which is higher than interface price.
    Could you please tell me, why SAP price is higher than interface net  price???
    Thanks in advance,
    natraj

    Hi,
    Go to MR21 and correct the MAP ( moving average price) for that material.
    Probable reasons:
    Check the currency in purchase order.
    If freight value is there then check the currency for the same.
    Regards
    Kedar
    Edited by: Kedar Kulkarni on Jan 30, 2008 12:53 PM

  • Difference between Sales price (VKP0) and further sales price (VKP1)

    Hi,
    Please could anyone help me to understand the difference between VKP0 and VKP1. In which scenario, both will be used in SAP Retail?
    Thanks,
    Ashish Kumar

    Hi
    As per your given example :-
    In VA01 screen;
    Material:100000939 ; quantity: 1.000,000kg Unit price:146,62 total:146.620,00
    But;
    VF01 screen;
    Material:100000939 ; quantity:432 (Batch1)
    quantity:366 (Batch2)
    quantity:162 (Batch3)
    If you check you will find that system is calcultaing correctly.
    In above case total material delivered is 960 Kg (432366162) and reate is 1000 per Kg. so total value is 140755.20. and if you calculate the price separately for each batches separately it will be 63339.84, 53662.92, and 23752.44 for the batches with quantity 432, 366, and 162 respectively. If you add these value it will be same as the value for 960Kg.
    Now in any case if you are getting some difference in paise then you may use Price Condition Type DIFF or round off the Price Condition.

  • Net price in R/3 PO differ from the actual local PO net price Urgent

    Hi,
    I  am working on extended classic scenario
    I created a local PO, in which the net price of the material is 100 Euro later on I changed the payment terms and when I checked the backend PO which is the copy of the local PO, I found that the net price has been changed from 100 Euro to 212 Euro and when I checked the PO in SRM I could see the same value i.e. 100 Euro.I checked the change document in backend system and found that the net price has been changed by the SRM_RFC user.
    This has happened for quite a few number of local PO
    I am not able to understand how the backend PO net price can differ from the local PO net price.
    Please provide me useful input
    Regards,
    Yatendra

    Hi Yatendra,
    I think this is due to R/3.
    Can you check the source of supply in R/3 PO ?
    especially if a PIR or contract has been assigned ?
    Look at price conditions in R/3 PO item, to see the execution plan of pricing.
    I think that during ECS PO creation in R/3, the SRM price is correctly passed, but during the change the price is overwritten by R/3.
    What are your SRM & R/3 releases ?
    Check OSS arround BAPI_PO_CREATE, BAPI_PO_CREATE1 and BAPI_PO_CHANGE.
    Rgds
    Christophe
    PS: please reward points for helpfull answers

  • Invoice for difference in selling price

    Dear Memebers,
    I've invoiced to a customer with excise tax code for 100 Rs.
    Now the price has increased to 120 Rs and I want to raise a seperate invoice for the excess amount and the tax on it without physically suppling any materials to him.
    How to do this in Business One ?
    Rgds.
    Suresh Kannan

    Hai Suresh Kannan 
       Try this
        I have faced this same problem, we suguest to put one Invoice with non inventory item with the name of "price different" for example create one non inventory item and give excess value this will affect only party leadger

  • Pr price and Material price("Urgent")

    Dear MM experts
    Here in our plant, earlier we purchased one material from the foreign vendor with a price of 12000.00 INR each.
    Now the same material is avilabe in Indian with a price of 150.00 INR earch.
    My problem is:
    When Im trying to create a PR, im getting the message
    " PR rate cannot be less than material rate, material rate 12000.00, Pr rate is 150"
    So how can I over come this problem, please suggest me any configuration is required.
    For the same problem when I tried to create a pr in IDES version, It is allowing me to create pr lesser than the previous purchase.
    Thanks in advance,

    Hi Mr.Ranganath,
    Accountin view 1 in MM02 transaction, is in non ediatable form, we cannot change the price in that field.
    And as I told, In Ides version it is allowing to enter the price which is lower than that of the material price.
    thanks for your response,
    regards,
    Govardhan,V.

Maybe you are looking for