Accounting document for Excise Invoice
Hi,
Accounting Document generated for Excise Condition types.We do not want to generate Accounting document for Excise Invoice.
We have marked the Excise Condition types JEXP,JECP,JA1X as Stastical in Pricing procedure & also not assigned the Account Keys for the same.
How to make other settings for non generation of Accounting document for Excise Invoice.It's a Domestic scenario.
Please suggets.
Thanks & Regards,
Hemant PAtil
Hi,
Instead of creating the Excise Group i have created the Sub Trasaction type (DS) ETT Type DLFC.
In SPRO Specified the Excise Account per Excise Transaction DLFC & DS.
Also Specified G/L Accounts per Excise Transactions.
Excise Grp (P2),ETT (DLFC),Company Code (MU51),Chart of Accts(XXX),all the G/L Accounts kept BLANK.
While creating the Excise Invoice thor.J1IIN,if i put Sub Transaction type DS then the system gives the following error.
Excise modvat accounts not defined for DLFC transaction and excise group
Message no. 8I402
Please suggests.
Thanks & Regards,
Hemant Patil
Similar Messages
-
Accounting entries for excise invoice for purchase returns in J1IS
Dear Friends
1) I recorded an excise invoice for goods receips in J1IEX . The accounting entry is
Input BED a/c DR
Input ECS a/c DR
Input H.css A/c DR
CENVAT clearing CR
2) There were some damaged items and same returned to vendor. I did RETURN Delivery in MIGO. The excise invoice in J1IS gives error " BALANCE IN TRANSACTION CURRENCY". Here I used Ref document type - MATD
QUESTION :
What is the Excise transaction type for ' other outward movement' in J1IS to which I should assign the excise accounts to reverse (1) above. Is it OTHR or GPRO.
Thanks
kamalaDear Mathews,
It is not capital goods. Also if I do a JV in J1IH, the entry goes and is as below :
Cenvat clrg DR, Input -BED /E.cess/ S.cess CR
But J1IS does not save, though I have assigned all said accounts in 'Excise accts per excise transation' for OTHR. Also I read in wiki that the entry for purchase return excise inv in J1IS is ' CENV CLRG ....DR , CENV RECEIVABLE ...CR ' .If so, then do i creat new GL for Cenv Receivable ? What is its effect on FORTNIGHTLY UTILIZATION
thanks for telling
kamala
Edited by: Kamala Surianarayanan on Mar 6, 2009 6:38 AM
Edited by: Kamala Surianarayanan on Mar 6, 2009 6:38 AM -
No accounting document for Cancellation Invoice(S1)
Hi All,
I have a scenario where in an Accounting document is not getting generated for a Cancellation invoice(S1) whereas the billing document it cancels (F2) has an accounting document generated.
Could you please tell me why this is happening?
Thanks & regards,
MP.Dear MP,
Go to VOFA & select your Invoice Cancellation type (S1).
In General Control there is a check box for "Posting Block". Remove the tick mark in that box (keep it blank).
This would ensure that your Invoice Cancellation (S1) documents are posted the moment you save them.
Hope this Helps...
Reward if useful...
Thanks,
Jignesh Mehta
Edited by: Jignesh Mehta on Sep 19, 2008 1:39 PM -
Accounting document not generating for excise invoice.
Dear all ,
my issue is
accounting document not generating for excise invoice
we are creating accounting document in J1iin
with refferance to billing document but the accounting docuemnt is not generating
the accounting document for billing document is generated
so why the accounting document for excise invoice is not genrating its showing the correct amount in BED ,cee and HE Secc.
please help
regards
SubratIMG -> In Logistics u2013 General -> Tax on Goods Movement -> India -> Account Determination -> Specify Excise Accounts per Excise Transaction
Check if the following is maintained or not
DLFC CR Credit PLAAED PLA AED account
DLFC CR Credit PLAAT1 PLA AT1 Account
DLFC CR Credit PLABED PLA BED account
DLFC CR Credit PLACESS PLA cess account
DLFC CR Credit PLAECS PLA ECS Account
DLFC CR Credit PLASED PLA SED account
DLFC CR Credit RG23AED RG 23 AED account
DLFC CR Credit RG23AT1 RG 23 AT1 Account
DLFC CR Credit RG23BED RG 23 BED account
DLFC CR Credit RG23ECS RG 23 ECS Account
DLFC CR Credit RG23SED RG 23 SED account
DLFC DR Debit MSUSP CENVAT suspense account
Also IMG -> In Logistics u2013 General -> Tax on Goods Movement -> India -> Account Determination -> Specify G/L Accounts per Excise Transaction
Check if for all Excise group u2013 DLFC u2013 Company Code combination GLs are maintained or not (especially in production client) -
Accounting document not generating for excise invoice-please help
Dear all ,
my issue is
accounting document not generating for excise invoice
we are creating accounting document in J1iin
with refferance to billing document but the accounting docuemnt is not generating
the accounting document for billing document is generated
so why the accounting document for excise invoice is not genrating its showing the correct amount in BED ,cee and HE Secc.
please helpDear G. Lakshmipathi,
As uknow i am getting problem when i am creating the debit memo
so is there any specific ETT for debit memo is there .because we are not maintaining delivery type to billing type here in CIN setting
so its not goods removal through sales . so what will be transaction type for this.
how to check the error that why the accounting document is not generated as no error log is also comming.
so please help me in this regards.
Thanks with Regards
Subrat -
Accounting document for Export Excise invoice
Dear All,
We have two scenario's one is Domestic Sales & Export Sale.
In domestic sales as per the normal flow of document we create excise invoice after billing document and accounting documents are also generated and updated in the billing document accounting (VF02). Accounting document for excise invoice has been generated.
However in export sales we create excise invoice with the reference of billing document but no accounting document has been generated for excise invoice.
Can u please tell me where i have to make changes so my accounting document for export excise invoice will generate?
Thanks & Regards,
RatishHi ALL,
There are 4 export scenario :
1) Deemed export 2) Export under Bond 3) Export under claim for rebate [No bond] 4) Export under Letter of Undertaking.
3) In export under no bond process is :- we pay the excise on the goods for exports and create the ARE-1 doc and send to port where the customers officials note the actual quantity of goods on the ARE-1 doc and stamped it. Then these stamped ARE-1 will be send to the excise range of the despatch plant(for exports) where we claim the rebate.
Now if you are not able to generate the accounting doc for such a scenario some of the consultants may suggest u to use the user exit (J_1I7_USEREXIT_DUTY_IN_EXPORT) and pass the the value X to the parameter SUPPRESS_CALCULATION this intern will help u to generate the Accounting doc also. but real problem lies somewhere else.
Actual Solution: Maintain J1ID (Customer excise details)
for export customer maintained the excise indicator to 3 {Nil Duty} insted of 1 {100% tax}.
Problem will be solved
Regards
Satish Zade -
Unable to create Accounting document for my Outgoing excise Invoice
Dear All,
I am implementing sales from Factory. I am unable to creat accounting document for my Outgoing excise invoice. When I click the Utilization button, The excise invoice type is selected Deemed.
1. How to control which Which Excise invoice type should be selected in J1IIN.
2. For Deemed exports will system not genererate Accounting document for Excise Invoice?
3. Where to view the excise invoice document types (Like Billing and order types)
Thanks & RegardsFor deemed export sales,
-Accounting documents will not get generated. (ref: Excise Acct Determination in CIN settings, you will not find Excise Tranraction type:ARE3 for which G/L account will not be assigned)
-Excise Invoice type will be automatically triggered based on configuration : Excise Group / Series Group detetermination.
- For Deemed Exports , only Quantity will get updated in RG1, but not the value. thats the reason, accounting document will not get generated.
- This excise invoice is created, for - to update the RG1 registry / ARE3 creation.
hope it clears
regards, -
How to create multiple accouting documents for one invoice for diff curr
Hi experts/gurus,
I have a requirement where we need to create two two different accounting documents for one invoice. The scenario is this:
1) We are exporting goods to oversea customer, as such the currency is bill in USD
2) We also have transportation charges using another condition type, we need to capture this charges/accrual in local currency which is MYR.
Currently, the system will automatically convert the transporation charges to USD when we create the invoice and the accounting document will be generated in USD for both sales and transport charges.
is there a way to fullfil the above requirement, any setting in condition type or any user exists we can used to create hte accounting documents.
Any ideas/input is highly appreciated, points will be awardedHi Wan,
The following user exits are available in report SAPLV60B for transfer to accounting (function group V60B): So please go through these.
·EXIT_SAPLV60B_001: Change the header data in the structure acchd
You can use this exit to influence the header information of the accounting document. For example, you can change the business transaction, "created on" date and time, the name of the person who created it or the transaction with which the document was created.
·EXIT_SAPLV60B_002: Change the customer line ACCIT
You can use this exit to change the customer line in the accounting document. This exit is processed once the ACCIT structure is filled in with data from document header VBRK.
·EXIT_SAPLV60B_003: Change the customer line in costing
The customer line is filled in differently for costing. You can use exit 003 to influence the ACCIT structure.
·EXIT_SAPLV60B_004: Change a GL account item ACCIT You can add information to a GL account item (such as quantity specifications) with this exit.
·EXIT_SAPLV60B_005: User exit for accruals
Once all relevant data for accruals was entered in the GL account item, you can add to this data with this exit.
·EXIT_SAPLV60B_006: Change the control line ACCIT
You can use exit 006 to add information to the control line.
·EXIT_SAPLV60B_007: Change the installment plan
You can use exit 007 to add information to the installment plan
parameters in the GL account item.
·EXIT_SAPLV60B_008: Change the transfer structure ACCCR, ACCIT and ACCHD
After the accounting document is filled in with data, you can use exit 008 to change the document once again.
·EXIT_SAPLV60B_010: Item table for customer lines
You can use exit 10 to influence the contents of customer lines before they are created.
·EXIT_SAPLV60B_0011: Change the parameter for cash account determination or reconciliation account determination
You can use this exit to change inbound parameters in order to influence account determination.
I hope any one of these will solve your problem
Thanks,
Murali. -
Accounting documents are not posted for Excise invoice
Hi,
1. The Excise invoice has been created with reference to F2 invoice but the accounting documents is not posted for excise invoice, what is the settings needs tobe maintained to post the accounting entries to excise invoice..?
2. where we will maintain number ranges for excise invoice..?
Thanks
Rao..hi
1. The Excise invoice has been created with reference to F2 invoice but the accounting documents is not posted for excise invoice, what is the settings needs tobe maintained to post the accounting entries to excise invoice..?
Not sure but can u try to relese this to accounting
2. where we will maintain number ranges for excise invoice..?
Excise invoice number range is depend on Excise series group.
T-Code : SNRO
Following is the No. Range Objects related to Excise, select the proper no. range object as per your requirement.
J_1I57FC - 57FC Number Range
J_1IARE1 - ARE1 Doc No object based on Series Group
J_1IARE3 - ARE3 Doc No object based on Series Group
J_1IBOND - Excise Bonding: Bond number object
J_1ICERT - Withholding Tax Certificates (India)
J_1ICHLNNO - Internal number range for challans
J_1ICONPLA - Consolidated PLA serial no. generation
J_1IDEPINV - Excise Invoice Number for Depot Invoices
J_1IEXCEXP - Export excise invoice number range
J_1IEXCINV - Excise invoice number
J_1IEXCLOC - Local excise invoice numebr range
J_1IEXCTST - Excise invoice with intervals
J_1IEXINEX - Excise invoice number for export
J_1IINTNUM - Internally document number to be generated
J_1IINTPR2 - Despatch serial number
J_1ILIC - Excise Bonding: License number object
J_1IPLA2 - PLA part II number range object
J_1IRG1 - RG1 Number range object
J_1IRG1_T - No. Range for RG1 - Excise group / Material
J_1IRG23A1 - RG23A part 1 no. range object
J_1IRG23A2 - RG23A part II number range object
J_1IRG23C1 - RG23C part I number range object
J_1IRG23C2 - RG23C part II number range object
J_1IRG23D - Folio Numbers for RG 23D
Check the link
Re: Excise Invoice Number Range
excise invoice and domestic invoice sharing same number range -
Accounting entry against Excise invoice not created for Service Tax sales
Dear all,
I am facing one problem related to accounting entry against excise invoice not created, for service tax sales scenario in SEZ plant.
Accounting entry against billing document is generated,which contains revenue account-Debit entry,service tax 10% --Debit entry,ECS-Service tax 2% --Debit entry, SECess Service Tax 1% --Debit entry & Sundry Debtors (Reco) - Domestic(Customer receivable reconciallation) account-Credit entry.
But after generating excise invoice, accouning entries not generated for clearing of Cenvat suspense entry(i.e.service tax 10% ,ECS-Service tax 2% , SECess Service Tax 1%) which is generated during billing document.
Plz. suggest step by step guideline to resolve this issue.
Thanks & Regards,
Mukesh PardeshiHi ReazuddinMD,
thanks for your reply and support...I checked all the entries/accounts maintained correct.. but the Accounting entrys against Excise invoice not created..
Now i am geeting error as below at the time of saving Excise invoice,
No account is specified in item 0000000001
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000001" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document. -
Userexit for billing documents vs Excise invoice --
Hi
i am canceling the billing document (VF11) with reference to excise invoice
in this case i am using the sap standard program RV60BFZA
but for some invoice , its triggering , but some invoice , its not triggering
so i cant use that program
any other badi / User exit available to control of billing documents Vs Excise invoice
transction access is VF11Hi,
Use this program SAPMJ1IJ in this program there are 4 includes.
First try with MJ1IJF01
So check with your abaper which exit is working in this include.you can do it by setting break-point.
Also check other includes MJ1IJTOP MJ1IJO01 MJ1IJI01
Thank you, -
Error while detrmining Internal Document Number for Excise Invoice.
Hello mate, I am trying to create excise invoice for for factory sale. while saving the document I am getting an error" Error
while detrmining Internal Document Number for Excise Invoice. Message: Maintain Number Range for J_1IINTNUM". I have already maintained number range for mentioned object "J_1INTNUM" in TCODE SNUM , still getting error. Please solve my querry . Is it related to transport or number range activation or something else? I have maintained number range with serial no. "01"Hello ,
Ensure that number ranges are properly maintained in the respective client that should be the year specific.Some times even u maintained the system should not consider that number ranges due to table updation problem ,because i had faced the same in the earlier and received the reply from the sap stating that this error was occured rarely after the years,so please ignore that ,for your problem u first come out of the screen and then re log in and then create the excise invoice ,then check the number ranges .
Please revert for any
Kalyan -
The document type of accounting document of an invoice is different for an
Dear Friends,
The document type of accounting document of an invoice is different for another invoice of the same type.
The company codes differ.
For example the credit memo B1 has RV as the document type for a particular company code and sales org,
while the it is Q1 for another company code & sales org.
Is there any customising settings in FI. Please help.
Kind Regards
Ravitry again
-
Find accounting document for deleted incoming invoice document
Hi all,
I have few ncoming invoice documents which were deleted. those documents i can see in RBKP table.
I want to trace the accounting documents for those deleted documents.
Can any one help me to find the accounting documents for deleted documents.
thanks in advance.Hi,
this might give you an idea:
data: l_belnr like bkpf-belnr, l_gjahr like bkpf-gjahr.
clear: l_belnr, l_gjahr.
data: l_string(20) type c.
clear l_string.
data: l_belnr_2 like bkpf-belnr, l_gjahr_2 like bkpf-gjahr.
clear: l_belnr_2, l_gjahr_2.
select belnr gjahr from rbkp into (l_belnr, l_gjahr)
where rbstat = '2'. "Status = deleted
concatenate l_belnr l_gjahr into l_string.
select single belnr gjahr from bkpf into (l_belnr_2, l_gjahr_2)
where awkey = l_string.
write: /'FI', l_belnr_2, l_gjahr_2, 'MM', l_belnr, l_gjahr.
endselect.
Note that the key here is AWKEY.
Best regards.
Edited by: Pablo Casamayor on Apr 13, 2009 3:03 PM -
Invoice Posting with two accounting documents for Service PO
Hi Gurus,
We have created one service (GR based Invoice verification) PO for which we have assigned a costcenter which has been created for different company code(rather than what company code we have mentioned in PO).
Now during Invoice creation out of 6 invoice entries only one Invoice has been created with two accounting documents for two different company codes, when we found this and canceled the same only basic entries has been reversed.
I just wanted to know how this single invoice has been created with two different accounting documents for two different company codes.
Please guide me in this regard.
Thanks and Regards,
Ravindra C.MHi Aasif,
Thanks for your reply, if that would have been case then each Invoice created for that PO should have two accounting documents but out of 6 invoice created only one invoice has been created with two accounting documents.
I am completely agree with you that it has posted as inter-company transfer but why only one invoice has been created with two accounting documents.
In addition to the above I just wanted to know if for GR-based invoice verified PO if we create a Invoice before creating service entry sheet whether two accounting documents will be created as we have mentioned different company code costcenter.
Please guide me in this regard.
Thanks and Regards,
Ravindra C.M
Maybe you are looking for
-
Why is the toolbar in safari now black with white text after upgrading ipad 2 to ios7?
My (retired) mum downloaded ios7 onto her ipad 2 yesterday but is now complaining that when she launchez Safari and uses google, the toolbar at the top of the screen is black with white text. She remembers something popping up during upgrade in the l
-
Have framemaker files generated on mac in 2000 want to incorporate data into indesign cs 6 for pc?
-
With new computer, no choice on toolbar to save password or sign in names at certain sites
The choice to save a password and sign in at sites is not available in the tool bar since I got a new computer...I don't know how to add this and I really would like to have it.
-
How to restore the application icon
I need to know how to restore the application icon back to my Macbook. I need to download firefox and can not do so becuase the application icon is not showing up.
-
HT4623 software update wont work
I'am trying to update the new software onto my iphone 4 and it has told me i need to restore my phone,m so i try to do it but then stops restoring about half way through and it just says my phone is in recovery mode and wont work