Add field to a view

HI All,
I need add the field IDTYPE to view BP_EMPL_SEARCH.
WHAT ARE THE STEPS TO DO SO?
well as possible detailing the steps because I'm new to crm
Thank you very much

Hi,
Can you please explain your requirement, do you want to search contact's by identification types?
If that's the requirement let me know will explain in detail how to enhance contact search by bp identification number's..
Cheers,
Sumit Mittal

Similar Messages

Add fields to maintenance view and update then using events

Hi experts:
I've created a table with 4 fields, one of them is userid. Also, there is a maintenance view to add new entries.
I want to display user name when typing userid using events (1 or 21). I know how to do it if username is one of the fields of the table, but there is a requirement to not store username in the table, just userid.
My question is: is possible to add a field into the maintenance view and update it using events but not store the value in DB?.
Thanks in advance for your help.
Regards,
Carlos.

In the save event just clear the entries of the field(user name) in the internal table.

Adding field in Maintenance view of table

Hi,
I am trying to create a custom maintanable table. Now the requirement is I need to add one more extra field in the maintenace view of the table which should not be in the table fields and is for display only in the maintencae view.
I tried adding a cloumn by editing the screen program generated by the table maintenance generator. I get the the display in the maintenance view of that extra field. But I dont get the values populated.
Can you please let me know in which PBO or PAI i should write the module programe ..
Help will be rewarded with points.

Hello Bluesh
Normally the extra field should be from a table that has a foreign-key relationship to your main table. Thus, add this additional table to the list of tables for the view. If it does not have a suitable relationship you cannot add it to the list of tables.
Afterwards add the required field to the list of view fields and set its property to 'R' = read-only.
If correctly defined there is no need at all to modify the screen(s) or the coding of the PBO/PAI modules.
Example: your z-table contains field KUNNR (value table KNA1) and you want to add the NAME1 field to your maintenance view
add table KNA1 to the list of tables
add field NAME1 to view fields
set its property to 'R'
regenerate function modules and screens
Regards
Uwe

Add data to table view from input fields in a page

Hi
        I am developing a BSP page which will be called from SRM shop transaction. After user enters the line item data, data will be passed back to shop transaction using OCI interface and the page attributes (URL).
   (1) How can I add data from input fields to table view on a page on a button click? I am able to add first line but I could not retain first line data when I try to add the second line.
      I am able to add multiple lines to table view if I use view and controller by adding to the line data to static attribute of the controller. I cant use the controller and view because I can not set the attribute to Controller automatically.
   (2) Is there a way to pass an attribute (URL) to controller from SPRO? Like we pass an attribute to page automatically (Automatic page attribute).
   (3) How can I call a controller and view and pass the page attribute to the controller on a button click from a page with out controller?
Thanks
Sreenivas

I'm trying to test the merge with the following data in a test.txt file:
ZZZZZ114923000004
1234Z400660000001
ZZZZZ114923000010
Getting an error:
SQL> @C:\dataformats\sql\pc12seriesMerge.sql
Directory created.
SP2-0552: Bind variable "17" not declared.
SQL>
here it the pc12seriesMerge.sql file
set serveroutput on
create or replace directory user_dir as 'c:\dataformats\incoming\';
DECLARE
v_filename VARCHAR2(100); -- Data filename
v_file_exists boolean;
v_file_length number;
v_block_size number;
f utl_file.file_type;
s varchar2(200);
lineString varchar(200);
v_account varchar(5);
v_IDN varchar(6);
v_quantity varchar(6);
BEGIN
v_filename := 'TEST.TXT';
DBMS_OUTPUT.PUT_LINE(v_filename); --shows filename
utl_file.fgetattr('USER_DIR', v_filename, v_file_exists, v_file_length ,v_block_size );
IF v_file_exists THEN
dbms_output.put_line('File Exists');
create table ext_table (
account varchar2(5),
idn number(6),
quantity varchar2(6)
organization external (
type oracle_loader
default directory user_dir
access parameters (
records delimited by newline
fields (
account position(1:5) char(5),
idn position(6:11) char(6),
quantity position(12:17) char(6)
location ('test.txt')
reject limit unlimited;
MERGE INTO id_req_stg t
USING (
SELECT account,
idn,
decode(quantity, '-', 0, to_number(quantity)) as quantity
FROM ext_table
) v
ON ( t.account = v.account AND t.idn = v.idn )
WHEN MATCHED THEN
UPDATE SET t.quantity = v.quantity
DELETE WHERE t.quantity = 0
WHEN NOT MATCHED THEN
INSERT (account, idn, quantity)
VALUES (v.account, v.idn, v.quantity);
ELSE
dbms_output.put_line('File Does Not Exist');
END IF; -- file exists
EXCEPTION
WHEN UTL_FILE.ACCESS_DENIED THEN
DBMS_OUTPUT.PUT_LINE('No Access!!!');
WHEN UTL_FILE.INVALID_PATH THEN
DBMS_OUTPUT.PUT_LINE('PATH DOES NOT EXIST');
WHEN others THEN
DBMS_OUTPUT.PUT_LINE('SQLERRM: ' || SQLERRM);
END;
/

Add new field to auisearch view in IC WEBCLIENT

hi all
I AM NEW IN BSP
I nees to add field/s to AUIsearch VIEW AND Then to the
AUIitem .
Would you give me some advices on this topic?
thank
LG

Refer to my answer in the given thread
Re: IC WebClient: How to Enhance the data request for Inbox Search

Add fields in VA01 Sales view Item level

Hi Experts
I want to add some fields in the table control of VA01 that is in sales view of item level, how can we do it.
Is there any exit for adding fields in sales view of va01 transaction.
Please advice me.
regards
rajaram

Please use Screen Exit,
you can implement your screen exit in additional data A and B under item level data. if you are still doing this let me know for more help.
First you need to create a subscreen (program name SAPMV45A AND screen no. 9109-9121) then you need to implement a logic to call this subscreen in the logic od additional data A or B.
Well you need to use following includes
MV45AFZZ
MV45AIZZ
MV45ATZZ
MV45AOZZ
IT DEPENDS WHERE U WANA INSERT, AT ITEM LEVEL OR HEADER LEVEL.
For Futher please look following link,
VA01/VA02 screen exit
Screen Exit for VA01, VA02, VA21, VA22, VA41, VA42
Thanks & Regards,
ShreeMohan

Add new fields to default view when creating fields via REST in sharepoint 2013

Hello,
When I add new fields via REST in a list, they don't appear in the default view for that list.
Here is my code in case you need it:
public function creeChamp(nomListe:String, champ:String, type:int, requis:Boolean):void
postURL.data = JSON.stringify({ '__metadata': { 'type': 'SP.Field' }, 'Title': champ, 'FieldTypeKind': type,'Required': requis, 'EnforceUniqueValues': false,'StaticName': champ});
thanks

You need to add the field to the view as well.
Here is the API.
Our code looks pretty different because I'm working in AngularJS, but here's a snippet from a working example:
$http.post(siteUrl + "/_api/web/lists/GetByTitle('" + listName +
"')/Views/GetByTitle('All%20Items')/ViewFields/addViewField('" + columnName + "')",
// POST data is empty for this request
}, getPostConfig())
.then(function (response) {
deferred.resolve("Added column to view");
.catch(function (response) {
deferred.reject('Error ' + response.status + ': ' + response.data.error.message.value)
Bottom line is you just POST to this URL however you normally do - except no data:
"/_api/web/lists/GetByTitle('" + listName + "')/Views/GetByTitle('All%20Items')/ViewFields/addViewField('" + columnName + "')",
Hope this helps!
- Bob

How to add fields to already loaded cube or dso and how to fill records in

how to add fields to already loaded cube or dso and how to fill it.can any one tell me the critical issues in data loading process..?

This is sensitive task with regards to large volumes of data in infoproviders.
The issue is to reload of data in case of adjusted structures of infoproviders.
Indeed there are some tricks. See following:
http://weblogs.sdn.sap.com/cs/blank/view/wlg/19300
https://service.sap.com/sap/support/notes/1287382

Adding fields in costing view of material master

Hi gurus,
I need to add 4 fields in costing view of material master. I have followed the steps in SPRO, for configuring customized screen in material master.
1) Created a function group YMMCO and copied the screen 2904 from program SAPLMGD1.
2) Added 4 fields in my customized screen.
3) Created copy of 01 ( Screen reference ) to z1 in OMT3B.
Since 2904 is not there in the sequence . I changed one 0001 sequence at the end to 2904 . I also assigned my program
SAPLYMMCO to it. I can see the changed fields in data screen and subscreen.
4) Then I assigned the SSq to z1 in transaction OMT3E.
But unfortunately, when I go to MM01 to create a material , I am not able to view the fields I added in costing view.
I have checked the screen for the previous field, it shows 2904 only.
Two days back, I did the same thing in basic data view 1 , it was working properly. As per client's suggestion I put it in
costing view, it is not working . Please give me suitable suggestions.
Thanks in advance.
D. Mallick

Hi,
I also need to add custom fields to Basic data view. After copying & changing the screen sequence in Config, I could able to see the custom fields in Basic Data view.
I have appended structure with custom fields to MARA table.
But the values I enter in the screen is not getting updated to the table MARA.
Can you please let me know the code, I should have have in PAI (Process After Input) module in the Sub Screen to update the values?
Thanks,
Dasa

SRM 7.0 New custom fields added to view do not appear in the component conf

Hi
I added two custom fields to the view V_QTE_DOFC_I_DESC of the WD componenet /SAPSRM/WDC_DODC_QTE_I_DS. This view gets called when bidder is trying to create a bid and clicks on add Substitute Item in the Item tab. This view is simply a popup window where we can enter ther substitute item.
I added two custom fields to the context of the above view and placed on the layout of the view as input fields. Then I tried to modify the component configuration /SAPSRM/WDCC_DODC_QTE_I_DS_SUB. When I look in t he web dynrpo built-in for the view V_QTE_DOFC_I_DESC, I don't see the custom fields that I just added. As a result, these custom fields are not displayed when I try to substitute an item. Could anyone tell me how to brining in these two custom fields into the component configuration.
Any help is greatly appreciated.

Hi Prasuna,
Sorry ..You are right..I was looking at some other WDC related to contract data..It you map the CUFs to /SAPSRM/S_CLL_CTR_ITEM which has the include structure INCL_EEW_PD_ITEM_CSF_CTR then it should work fine.
If you do this, are you able to view the new fields on the screen?
you mentioned that you are not able to save the data to the table.
Include your fields in INCL_EEW_PD_ITEM_CSF as well because if you add CUF to any of those doc types, you also have to add those CUF to the global structure for CUF documents.
Also Check if you fields are there in structures BBPS_CTR_CUF_ITEM,BBPS_CTR_UI_ITEM and BBPS_CTR_ITEM.
Check whether you have implemented the BADI's like BBP_DOC_CHECK_BADI ,BBP_DOC_CHANGE_BADI and BBP_DOC_SAVE_BADI . check out the structures (whether they having the CUFS) used in those if you have implemented any of them .
Regards
Lavanya
Edited by: LAVANYA CHAVA on Aug 25, 2010 10:10 AM

Add fields in KOB2 & KSB2 report in selection screen as well as output

Dear All,
I have an issue in which i have to add fields in KOB2 & KSB2 report.
i need to add below fields to KSB2 report.
1) Internal order
2) Vendor
3) Purchasing group
I also need to add profit centre in selection screen for KSB2
Similarly for KOB2 i need to add below fields
1) Cost centre
2) Vendor
3) Purchasing group
I also need to add cost centre as input for KOB2 report.
I have gone through note 325546 "CO line item reports: Creating a user-defined field" which can be helpful.
However i am not sure as to how do i add fields in input screen as required.
Other alternative is to create a Z report however when i try and copy the report both KOB2 & KSB2 call same report "RKAEP000".
I am not able to get as to how do i differentiate the call of different screens when ZKOB2 is called or when ZKSB2 is called.
I could identify " c_item_group" field having different values however i couldnot get a proper logic as to how correct screen can be called based on input
Please suggest .
Thanks,
Ronak

Hi Raymond,
The note 747588 is good as soon as you are adding fields from the same table only.
When I have added additional table into KAEP_SCOVP selection view below COVP (just because the extra fields I need are not in COVP) they will show up in KOB1 as selection criteria, but not getting saved.
Any idea if any ABAP should be regenerated or what extra steps are required when adding more tables into Selection View?
Thank you!

Is it possible for Apple to add "key" to the view options selection?

Is it possible for Apple to add "key" to the view options selection?

DJ1970, Unfortunately no. iTunes does not have the key in the database.
People who want to know the key of a song can use (unless they already have perfect pitch!) key detection software such as Mixmeister.
Once you know the key, iTunes does not even have a field to store it, although you could stick it into Comments or some other unused text field such as Grouping. These fields are indeed viewable in iTunes.

HOW to include a reference currency fields in a view ?

Hello Experts,
<b>I am having Currency fields error in generic extraction</b>
I have table where I am trying to extract data to BW via generic extraction. When I tried
to extract with the TABLE its giving me an error
<b>Invalid extract structure template RPSCO of DataSource ZBW_REP3_TEST
You tried to generate an extract structure with the template structure RPSCO. This operation failed, because the template structure quantityfields or currency fields, for example, field WLP00 refer to a differenttable</b>.
Now I created a view with all the fields same as my table.
But its still giving me the same error and taking all the fields as a primary keys. I have over 12 currency fields in the table. I am confused how to fix this issue and add a currency field to my view?
hOW to include a reference currency fields in a view ?
All inputs are much appreciated.
Thanks and Regards,
Harish

Thank you for your responce,
Can you please check my view and let me know where I am going wrong
View    Table   Field Dataele Data
field                    type                                            0
WLP01     RPSCO     WLP01     BP_WPL     CURR     15     Period value in ledger currency
WLP02     RPSCO     WLP02     BP_WPL     CURR     15     Period value in ledger currency
WLP03     RPSCO     WLP03     BP_WPL     CURR     15     Period value in ledger currency
WLP04     RPSCO     WLP04     BP_WPL     CURR     15     Period value in ledger currency
WLP05     RPSCO     WLP05     BP_WPL     CURR     15     Period value in ledger currency
WLP06     RPSCO     WLP06     BP_WPL     CURR     15     Period value in ledger currency
WLP07     RPSCO     WLP07     BP_WPL     CURR     15     Period value in ledger currency
WLP08     RPSCO     WLP08     BP_WPL     CURR     15     Period value in ledger currency
WLP09     RPSCO     WLP09     BP_WPL     CURR     15     Period value in ledger currency
If I add a
Table TCURC against any field what would be the view field and data element
Do I need to tick MOD?
Please suggest.
Kapadia,
If I do that its still taking all the fields are a primary keys and bringing 6 lakh records to where I originally have 49 records in a table
Thanks and Regards,
Harish

MM - Material master data - move standard field to another view

Hi everyone,
ÉCC 6.0 - release 7.0.
I've been adding many custom fields in Material master data MM01/02/03. Now I got a problem because we have to use a standard field in another view.
The field MARA-HERKL is set up to 'SV'(attribute V_130F-PSTAT):
Warehouse management = S
Sales = V
I want to add 'K - Basic data' in this field's attribute at OSMR Tcode , but this attribute is disactivated. I can not change this value.
I've check this note 306966 that mention: You cannot create new entries and delete entries in client 000. This client contains only the entries delivered by SAP which are used for distinguishing customer-specific fields and SAP standard during the maintenance of the other clients.
Is there any problem whether I delete this field and afterwards create it with the new values?
I'm not in client 000. So, I want to just make sure I will do a legal change.
thank you in advance,
Alexandre

None tips, Closed.

How to add Icon in Tree View in Forms 6.0 (URGENT..!)

Hello All,
I want to add icons in tree view (hierarchical tree) by using
forms 6.0.
So pls. help me to find out the solution for the same.
thanks
Pradeep
null

Pradeep (guest) wrote:
: Hello All,
: I want to add icons in tree view (hierarchical tree) by using
: forms 6.0.
: So pls. help me to find out the solution for the same.
: thanks
: Pradeep
hello pradeep,
for adding icons in the tree, u willhave to look closely to the
data format for the tree.in the data format used for populating
the tree we are supplying 5 fields. the state of the tree node
(expanded or collapsed), the depth of the node w.r.t the parent
node, the node value, the node label(what we see on the tree)
and the node icon which we want to use. for the node icon we
have to provide the entire path of the icon file. that's it.
hope this will solve the problem
null

Add field to a view

Similar Messages

Maybe you are looking for