Add new User Awareness Status Messages(Collboration)... :)

Hello All,
I want to add new user availability status messages (which are related to Awareness Status Selector in Collaboration).
When an user enables the Collaboration Launch Pad, the user can enable on:
i> Auto Detect Status
ii> Not Available
I would like to add essages like "Be Right Back", "In Meeting", etc....just like we have in Yahoo Messenger.
I found the par file which is respensible for such  Collboration feaures & its:
"com.sap.netweaver.coll.shared.ui.par"
but when I opened the par file to check the details...noticed that all is in the portalapp.xml file.
Cannot understand where can i add new messages....
Please help...
Awaiting Reply.
Thanks and Warm Regards,
Ritu R Hunjan
<i>Note: Please excuse me for posting this in EP Development Content and not KMC Forum section.</i>
Message was edited by: Ritu  Hunjan

Reinstalling isn't a drastic measure w/Snow Leopard. It just replaces all OS components with new and uncorrupted ones and Apple's basic apps, such as TextEdit, Mail, Safari, and Terminal. That eliminates any mucked up ones. Once you assure yourself that the problem's solved, make a bootable backup/clone or Time Machine backup and update via Software Update. Let us know how it turns out.

Similar Messages

  • How to add new user status in Solman

    Hello,
    I wanted to add a new user status in Solman.i have added one new user status " reopen" . but when i checed it is showing as "no status".
    I have also checked the table TJ30T, in this table we have 2 entry for all other user status one is in english and one is in german.
    Please let me know how to add entry in this table or is there any other ways to add new user status in solman.
    Regards,
    Bhavesh

    Hi Abhyankar,
    Explain the scenario where you want to create a new user status?
    General remark:
    Creation of new user status can be for 2 cases: Whether you want the status to show up in the status field or you want to only use the status to search corrections and the status is displayed in "Further Statuses" tab.
    If you want to use the new user status for searching the corrections and this user status will be manually set, then you need to create the status in CRMBS02 transaction without specifying any status numbers.
    Then the new status will be available in "Further statuses" tab and you need to manually set or unset the status.
    If you need your user status to reflect in the status field then you've perform the following actions in SPRO:
    1. Create Authorization key for the new status
    2. Create the new status with status number and order of visibility; assign the authorization key to the status
    3. Create the action which will set the status
    4. Add the action in the action profile
    5. Write the schedule condition required
    These steps are on a high level. Hope this helps you to decide.
    Regards,
    Sameer

  • Master Data Services - Can not add new User and MDS can not Identify LOCAL Users

    Team,
    We are using  SQL Server 2008 R2 and system working since long and suddenly we observed mentioned two issues. The server MyServer is already restarted but did not help.  The MDS installed and configured on SAME Machine (MyServer).
      I  have two issues here.
    1. MDM website can not Identify the local Users (MyServer\MyUser).
    The User created on local Machine (MyServer\MyUser). I logged into MDM website using Admin login and click on User and Permission. Then I click on add and Text box appears to type UserName. Here I type "MyServer\MyUser" (MyServer\MyUser is already
    exists and working since long). Then click checkName; I received a message "No exact Match was found for MyServer\MyUser". Where as User from OTHER domain identified in MDM but could not identify ONLY the local users like "MyServer\MyUser".
    2. Can not add new user in Existing working MDM.
    I created windows user on machine (MyServer\MyUser1) and add it in UserGroup having an access to MDM. and then I tried to login to MDM using newly created user (MyServer\MyUser1) ; I see error Access Is Denied. The Permission assigned to UserGroup (not
    to individual user). The new User (MyUser1) should automatically get added in MDM once logged in. This is working for existing users in UserGroup; BUT NOT ONLY for new user (MyUser1).

    Now I Solved this problem in my case.
    I just grant again all permissions according http://msdn.microsoft.com/en-us/library/ff486994.aspx. Now all work fine.
    Hope, it will help 

  • HT3529 i cant add new mail fir I message as every time i add and tyep pass for Apple ID the email still not add to be reached by i message

    i cant add new mail fir I message as every time i add and tyep pass for Apple ID the email still not add to be reached by i message.
    Pls i need to validate my mail adress [email protected] to send and recieve Imessage from my iphone.
    Islam fouad
    +966554948283

    i cant activate Imessage in my iPhone as every time i write my Appel ID and the Password the message appear the User id or password incorrect but 100% sure that its correct.
    Pls feed me back

  • [svn] 3867: Add new user-agent info to the sample services-config.xml file.

    Revision: 3867
    Author: [email protected]
    Date: 2008-10-24 07:13:10 -0700 (Fri, 24 Oct 2008)
    Log Message:
    Add new user-agent info to the sample services-config.xml file.
    Modified Paths:
    blazeds/trunk/resources/config/services-config.xml

    Resolved! The problem was in the php code the wizard had generated as an example and that I had edited in Dreamweaver. I had tried to start a session and set session objects in the php code. I developed if() { statements} to check the session variable before executing the function in some of my data services. Apparently the wizard does not like this. I removed all references to session. I reconfigured the input types and the return types for each service. With the code now clean the wizard created the example code and placed the proper package in the scr.services package. I still have custom php code and it executes.
    Things I learned:
    If the php code stops when a session variable is not available in the if statement and the data service is refreshed, the wizard will not "look" beyond the if statement.
    Functions downstream of a session variable misshap will show in the data services window but the functions will have a circle icon to the left of the function name and each variable to be passed to the php code will be declared as type = Object in Flashbuilder. The input types and return types will have to be reconfigured for each non-functioning function. Simply commenting out a portion of the php code and attempting a refresh will not make it work again.
    When the wizard is unable to refresh properly because of a stop in the php code it stops working completely so additional refreshes or creation of code is not carried out.
    I decided to create a My SQL table for user and other identifiers rather than attempting the session object again.
    Sorry, I did not make screen shots as I solved this problem. I hope the solution is not hard to visualize.
    Thanks for looking and considering how to help me. I hope my solution works for you.

  • Programaticlly add new user in DSC

    Hi
       Is there a way to programatically add new users? I want to build an application where someone logged in on a high level is able to add new users to the system. I haven't found a function for this.
    My idea to get around the problem is to let the system take care of user names, and map these names to predefined user names in the DSC. This willl however put limits to the number of users of different levels, as well as it would mean having a number of not used user names in the DSC madule. Which I would like to avoid.

    Spring,
    The issue is answered in this thread
    http://forums.ni.com/ni/board/message?board.id=170&message.id=94544&requireLogin=False
    Ame G.
    National Instruments

  • Programatically add new user in DSC

    Hi
       Is there a way to programatically add new users? I want to build an application where someone logged in on a high level is able to add new users to the system. I haven't found a function for this.
    My idea to get around the problem is to let the system take care of user names, and map these names to predefined user names in the DSC. This willl however put limits to the number of users of different levels, as well as it would mean having a number of not used user names in the DSC madule. Which I would like to avoid.

    Spring,
    The issue is answered in this thread
    http://forums.ni.com/ni/board/message?board.id=170&message.id=94544&requireLogin=False
    Ame G.
    National Instruments

  • How to add new fields in Reduced message ( in BD53 )

    Hi Experts,
    How to add new fields in Reduced message ( in BD53 ), when the required field iis available in Table or Structure and need to be added in BD53 so that we can ALE.
    Thanks,
    Ninad

    Hello,
    I think of something like:
    First, you create extension, with transaction WE30.
    Then, reduce your idoc, your extension should also be proposed.
    Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
    regards.
    F.S.

  • How to add new users to BPM 11g

    In BPM 10g, I can add new users and roles in administrator console. How to login to BPM 11g administrator console and add new users?

    While creating Human Task did you selected "Initiator" in the Pattern?
    Login as administartor(weblogic) go to Administration the you will find all the processes and corresponding roles. There you can add/modify the users to the processes.
    Let me know if you have any questions.
    Thanks
    MC

  • Can't Kerberize or add new users

    I keep experiencing the same strange behavior: after a variable amount of time (from hours to days) Open Directory in Server Admin will show that Kerberos is not running. When I click the Kerberize button, neither the server admin account nor the domain admin account will work. I just keep getting prompted for a password in a loop.
    Restarting may or may not show the Kerberos service running.
    In either case, I then cannot add new users to the domain. The New User button in Workgroup Manager is disabled.
    I'm really new to Mac Server (I don't even know enough to be dangerous); so, I'm not sure how to troubleshoot this issue. I'd like to transition users to portable home directories, but the solutions I've read to Kerberos problems is to demote the server and the promote. But that wipes the users, so, I don't really want to go that route.
    Any help is appreciated.
    Jeff

    Hi
    If you can authenticate to the OD node – and it only needs to be once – you can select all your users (not Directory Administrator UID 100) and export them. WGM > Server Menu > Export. How many are there? This will allow you to reimport them later on into any directory node you like, local NetInfo or OD. Passwords do not carry over but this is no big deal as you can assign a password policy later on. When first populating the OD node with users and groups its a good idea to export and save them all to a memory stick or something suitable. It may not help you in this situation but its a good tip for later on.
    As Leif says if Kerberos is stopping or starting and generally being flaky its usually (but not always) down to a problem with DNS somewhere.
    There are other possibilities. Perhaps the Server has been joined to an Active Directory KDC? If thats so the users you may be seeing are already on the AD Server and there is nothing to lose. It could also explain why authentication is a struggle. Your post also seems to be indicating a time sync issue, (along with DNS another common problem). Inspect the edu.mit.Kerberos file located in /Library/Preferences on the clients to see which KDC is issuing tickets. It may not be the OD Master. If you find that the server is supplementing AD and not providing SSO then its should be safe to demote. Ultimately this is really the only effective solution. Demote to Standalone and sort out the DNS problems (if any) and repromote.
    There is another possible solution which you could try if you feel brave enough.
    When the server get promoted to OD Master slapd creates the slapd_macosxserver.conf file in /etc/openldap. This file will contain an entry for the root LDAP user – rootdn. Just as System Administrator (UID 501) admin has root sitting behind it so does Directory Administrator (UID 1000) diradmin. This root user has total control over all the data inside the LDAP database, standard access controls do not apply to this user. The important bit about rootdn is that ANY USER and PASSWORD can be used. The user and password does not even have to exist in the LDAP database itself, it only needs to exist in slapd_macosxserver.conf. The default system admin account or root can edit this file to add a new user and password (it can be MD5 or plaintext), slapd will then assume that any user which can authenticate to the newly created name and password is the root user for the LDAP database and will give full access to user records and the OD node itself. Create a new user in the local NetInfo node first, try not to use diradmin and UID1000.
    Hope this helps – Tony

  • Can't add new users in Server Admin console in Server 10.1.4.

    I've run into an issue with an older OS X Server 10.1.4 running on a G4 platform. It functions as a shared file repository and I need to add new users. However, it would appear that I've developed a problem.
    When trying to add new users I get the following error:
    An error occurred in the Users & Groups module in entry point "RACMMenuItemSelected".
    A program error has occurred.
    1004
    Now, my best guess is it's a corruption somewhere. But, I don't want to go poking around the production server taking it down and up until I've got some idea where I'm going. Any suggestions on where my troubles might be? Or has anyone had this issue before, and how was it corrected? (Hopefully not by a full software reload.)
    I'd like to replace/upgrade this server, but until there's money in the budget, that's just a dream, I need to try to figure out how to fix what's here.
    Help, please?
    PowerBook G4 17   Mac OS X (10.3.9)   1.5G RAM

    No answer was found for this issue. I've finally removed the server from production and will likely reformat and reinstall for use in other production areas. Hopefully we'll be upgrading the OS at the same time.

  • Add new user in BPC

    When I add new user , I am not able to select my preffered server. Instead its using some old server. HOw to rectify.
    Please assist.

    Hi,
    What kind of authentication are you using? CMS or Active directory?
    Check for the servers and domains entered in the Server Manager.
    Check if they are, as you want it to be.
    Karthik AJ

  • Couldnot add new user to webserver

    Hi All,
    I want to add new users to my LDAP directory from webserver administartion console.
    I am using Sun ONE webserver 6.1. I have configured my directory service.
    When I add new user to it says -
    You do not have sufficient access privilages to perform the operation.
    Although, i can perform a ldapmodify command from the terminal to add new entry to the directory.

    What Bind DN did you use to bind to directory server in the WS Admin GUI settings used to configure the Directory service? Take a look at Global Settings->Configure Directory Service settings in your WS Admin GUI.
    Binding(the Bind DN) determines the permission level you are granted for the connection to LDAP. Try using cn=Directory Manager as Bind DN and test.
    Thanks
    Manish

  • Add new user action disabled sharepoint

    I am not able to add new user as an admin user. If I add admin as site collection admin then only I am able to see new user add action in sharepoint groups and I can not do that. I
    gave manage permissions rights but it does not allow to see new action in sharepoint groups.
    MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

    Hi,
    According to your post, my understanding is that you have an issue about add use in a group.
    Per my knowledge, when we add a user in the site collection administrator, the user would be assigned full control for the site.
    Then he would see the add option in a group.
    If you want to add a user as a site admin, we can assign him full control directly or add him to the site owner group.
    What did you mean "am not able to add new user as an admin user. If I add admin as site collection admin then
    only I am able to see new user add action in sharepoint groups and I can not do that."?
    If the use is a site collection admin, he would get full control, and the add option would be display in the group.
    It would be better if you can give us more information or screen print about this issue.
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they
    help and unmark them if they provide no help. If you have feedback for TechNet
    Subscriber Support, contact [email protected]
    Jason Guo
    TechNet Community Support

  • WVC200 - unable to change admin password or add new users

    Hi,
    I have WVC200 installed at home. It works fine in terms of viewing video from home and over the net.
    However, from the setup page I am unable to change the Admin password or add new users.
    Pls help.
    rgds
    hemant

    Hi
    hemantparmar11 
    and
    welcome to the Cisco Home Community!
    The WVC200 is handled by the Cisco Small Business Support Community.
    Please go here for discussions about this device.
    The Search Function is your friend.... and Google too.
    How to Secure your Network
    How to Upgrade Routers Firmware
    Setting-Up a Router with DSL Internet Service
    Setting-Up a Router with Cable Internet Service
    How to Hard Reset or 30/30/30 your Router

Maybe you are looking for