Adobe ABAP web dynpro

How  to put data from  internal table into Adobe interactive form in ABAP Web dynpro?

Nikita,
Check this [thread|Re: How to transfer Internal table to a Adobe form? ....urgent...; if it helps.
Chintan

Similar Messages

  • Submit button in interactive adobe form in abap web dynpro

    Hi can anyone help me out to know hoe to use the submit button in adobe interactive form in abap web dynpro .
    Iam creating a adobe form abap web dynpro . There i need to use the submit button to trigger some action in the adobe interactive form .
    So i need to know how to use the submit button and coding for that in the abap web dynpro .
    Vighnesh

    Hi Michelle,
    Could you tell me how you resolved the problem - as I'm facing exactly the same issue!
    Many Thanks
    Christine

  • Develop forms using Adobe Forms and ABAP Web Dynpro

    Hi, 
    Could someone help me on how to learn forms development using Adobe Forms and ABAP Web Dynpro?  Any suggestion on Tutorials / Books / other helpful hints please?
    I have good knowledge of Smart Forms and used these to generate PDF Attachments via emails.
    Thanks.
    Regards
    Keshav

    http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/d-f/faq%20on%20interactive%20forms%20based%20on%20adobe%20software.faq

  • Can ABAP web dynpro floor plan manager integrate with adobe flex ?

    Hi All,
    Is it possible to integrate Web dynpro ABAP with adobe flex ?
    Can we integrate the standard ABAP web dynpro floor plan manager screen with adobe flex ?
    Brief about my requirement: I have refer few articals about  ABAP web dynpro is easyely integrate with adobe flex. My client is currently implementing SRM 7.0 for procure to pay process. For your information, standard SRM 7.0 are developed in ABAP Web dynpro floorplan manager. In my client,other processess such as order to cash, resource management etc screen are designed in Web dynpro Java(deployed in SAP EP) to make it more user friendly and good in resolution. My client is very much happy with SRM  7.0 business logic, however not happy with the standard SRM screen. They have asked to redesign SRM screen to make it more user friendly and good in resolution. 
    Thanks in advance. 
    Regards,
    Jennyfer

    It is possible to insert Adobe Flash islands in Web dynpro. You could take a look at the following link for more information on how to implement this:
    Adobe Flash Islands in Web Dynpro ABAP

  • Adobe Flex 4 with ABAP web dynpro

    I currently am working with Flex 3 but wanted few features of Flex 4 for my project. Is there any way that I can use Flex 4 with ABAP web dynpro. I have tried using the 'Use Flex 3 compatibility mode' with 'merged into code' but this does not work. There is no data transfer happening. I see in the forums that this is not possible but all the posts are one year old. Just wanted to check if any new method is availabe.
    Kindly help.

    Hello,
    Flex 4 versions of the Islands SWC libraries were delivered via Support Packages(See Note 1614265).
    http://scn.sap.com/thread/3186643
    Best Regards,
    Tarun

  • Environment needed for developing, deploying the ABAP Web Dynpro

    Hi all,
    We have the following ECC environmnet in our office.
    ERP 2005, RELEASE 6.0
    KERNEL 7
    COMPONENT ECC 6.0 NON -UNICODE SYSTEM
    BASIS & ABAP SP 14
    We also dont have Enterprise Portal and no PI or XI. can we develop ABAP Web Dynpro without EP?
    I want to develop Web Dynpro's using ABAP. Can i do it? Do we need to install any thing else? any plug in..or do we need to upgrade our service pack?
    We are on service pack 14 and on ABAP Stack.
    Some one kindly help..this might be a simple question for many people...but i am really in need of information and could not get proper idea after reading the SDN and help.com
    if some one has a link .that explains the environmnet that i should have for Web dynpro ABAP..please help.
    Regards,
    Jessica Sam

    Thomas,
    Thanks a lot for your patience. Few more minutes of your valuable time..need help.
    So i can conclude that with my environmet and ABAP statck ..i can develop Web dynpro ABAP and BSP but not Adobe Forms.
    We have BI system in our office which runs on Java Stack and our ECC system is only on ABAP stack.
    But we were using ABAP Web services to build interfaces b/w SAP and .Net applications and hence we wanted to use SOAMANAGER,
    But SOAMANAGER runs on Java Stack and we dont have Java stack on ECC but have on BI.
    So what we did was..did some BASIS settings in BI and ECC systems and finally able to use SOAMANAGER of BI system to manage , create and deploy web services from our ECC system whihc is on ABAP Stack.
    Similarly can I also use the Java Stack in our BI system and do some settings at ECC end such that I can buid the interactive forms in ECC and use the Java Stack of BI system.
    Kindly please help..i am not getting answers to such questions in help.sap.com...may be people like you who are well experience will only able to guide me better.
    Kind regards,
    Jessica Sam

  • Enabling a Button on my ABAP Web Dynpro after reading imbedded Smartform.

    Hi:
    How would I go about enabling a Button on my ABAP Web Dynpro after the user has read the imbedded Smartform?  Basically I have a Smartform in an Interactive Form on the UI.  After the reader scrolls to the bottom of the Smartform, I want the "Agree to Contents" button to be enabled, so that the User implies that they have read the 5 page document.
    Thanks,
    MG

    Hi,
    Why you are not using the interavtive adobe form instanted of Smartform.
    You can add the button to your interactive adobe form. User sould have to go last page for it, without scrolling he will not go to bottom of form.

  • Error while accesing ABAP web dynpro application

    Hi Experts,
    We are getting warning symbol on web page status bar, when we are accessing the ABAP web dynpro application
    only first page of application is getting loaded and when we click on page it is showing error on status bar and we can perform any thing.
    once we double click on warning icon,
    below details are coming:
    Line: 1491
    Char: 3
    Error: Object Expected
    Code: 0
    URL: url of the ABAP web dynpro application
    This scenario is occuring for many ABAP WD application for a client.
    Please guide how to solve this issue?
    Thanks!
    Piyush

    Hi
    First try a very simple application with nothing in it just one text saying Hello World
    Run it and see what happens.
    Also check if your url uses FQDN name. something like https:
    company.name.co:50000\.......
    If you do not use the FQDN it will always show a script error on the bottom and some functions will not work e.g
    dropdowns.
    regards
    Yuval.

  • ABAP Web Dynpro iView error

    My ABAP Web Dynpro iView encouters errors:
    The URL http://sp06:8004/sap/bc/webdynpro/sap/z_jgo_demo// was not called due to an error.
    Note
    The following error text was processed in the system SB2 : WebDynpro Exception: Error in UCF Template POPUP_PAGE ($).
    The error occurred on the application server sw06_SB2_04 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: RAISE of program CX_WD_GENERAL=================CP
    Method: RENDER_TEMPLATE of program CL_WDR_UCF====================CP
    Method: HANDLE_TEMPLATE of program CL_WDR_UCF====================CP
    Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP
    I was able to run the ABAP web dynpro application outside of portal by using the url: http://sp06:8004/sap/bc/webdynpro/sap/z_jgo_demo/. But with the extra / at the end, I get the same error.
    Can anyone point me to how to remove that extra / at the end?
    Thanks
    Ben

    Hi Gurus ,
    We have upgraded the SAP HR system from ECC6.3 to ECC6.4 and netweaver from 7.0 to 7.1 .
    Following are the list of error in EHP4 system ,
    1) Layout of ABAP Webdynpro Component are not displayed .
    2) Any ABAP WEBDYNPRO Application is not displayed by tesing in SAP-R3 and also in ESS .
    error are as follows while trying to view layout in abap webdynpro application :
    http://dv.hr.co.in:4567/sap/bc/wdvd/painting.html?_vdrespkey=4IS29CT7NDRIOI511AFI0R1E3&_vdframe=painting&sap-client=435
    If any one have information for this kindly let me know .
    Thanks :
    Vishwas

  • IView not found error when excuting ABAP Web Dynpro iView

    Hi Experts,
    I have created one ABAP Web Dynpro iView for an existing Application.
    Parameters I have passed for iView creation.
    Namespace : sap
    Application Name: SampleApp
    System Name: R3_SYS.
    Can any one please pass on me the details what are the mandatory parameters need to be passed.
    Thanks in Advance,
    Chinna.

    Hi Chinna,
    You need to check the following parameters like
    Namespace - should be 'sap' as this is root node in SICF
    Application Name: - check name of WD application in se80
    Please refer to below thread for creating WD ABAP iview.
    Re: Webdynpro ABAP iView Blank Page
    Web Dynpro for ABAP iVIew's Namespace parameter
    how to create iview from webdynpro application  abap
    Hope it helps
    Regards
    Arun

  • Can the role info be passed from portal to ABAP web dynpro application

    Hi,
    We have some roles in the portal. We call the ABAP web dynpro applications from the portal. Is it possible to pass on the role from the portal to the Web dynpro ABAP application so that we can use this role information in the application.
    Thanks,
    Pooja

    Hi,
    you can try to add the expression
      role=<IView.PCDUnit>
    as part of the Application Parameters in the iView. This will be the role in 99%. However not all iViews started in the Portal must belong to a role. You can start iViews using page navigation that are not part of a role. Therefore the PCD does not talk about roles but about "units" which is the superordinate term.
    the value will be the PCD path of the role - e.g:
      portal_content/myFolder/roles/myRole

  • Calling an interface METHOD of another abap web dynpro application

    Hi Experts,
    Can u plz tell how we can Call an interface METHOD of another abap web dynpro application in main WD Component.
    Thanks
    Mahesh

    Hi ,,
       Example ALV interface method calling   GET_MODEL interface method
       View attribute   declaration   :    M_WD_ALV  type      IWCI_SALV_WD_TABLE
         DATA lo_INTERFACECONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE .
          wd_this->M_WD_ALV =   wd_this->wd_cpifc_alv( ).   "ALV is the usage name
         DATA lv_value TYPE ref to cl_salv_wd_config_table.
          lv_value = wd_this->M_WD_ALV->get_model(  ).   " interface method calling in ALV component usage.....
    Regards,
    Devi

  • Creating 'Z' views for Standard ABAP Web dynpro Application

    Hi Experts,
    I am totaly new to ABAP web dynpro objects.
    In our project there were some client requirements which required us to change the properties of the Views related to the Webdynpro. The Client now has said that he needs to apply some  enhancement pathces on his system. Due to this, the changes made to the Views i.e all the changes done in standard code are  lost.
    The client now wants a long term solution where all the changes need to be done in 'Z' implimentataion so that changes are not lost every time the pathces are applied.
    Is it possible to create an entire new 'Z' Views for the standard Webdynpro instead of standrad ones?
    If Yes how does one link them to the Webdynpro application ?

    Hi
    Have a look at following article about enhancing webdynpro applications.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700317da-bd79-2c10-368e-8f18bf5d8b81?quicklink=index&overridelayout=true
    Regards
    Manas Dua

  • Convert JAVA Web Dynpro to ABAP Web Dynpro application

    Hi,
    I was hoping someone could tell me if there is a way to port a JAVA Web Dynpro application to ABAP Web Dynpro. We have some JAVA WD apps that would now make more sense to have running on our ABAP system so we would like to convert them to ABAP WD apps.
    I know the theory is that WD is metadata/XML based so it should be possible to port the WD definition to ABAP and have the ABAP runtime generate the application again in ABAP. I expect that any custom code that is written in JAVA would need to be manually rewritten in ABAP - but it would be great if there was tool or method to at least port the majority of the application.
    Thanks in advance for your help,
    Simon

    Hi Simon
    You are correct in thinking that all WD apps are based on metadata, but unfortunately, the similarity between WD Java and WD ABAP is just a conceptual one, and no such tool exists to convert one to the other.
    In addition to this, there are certain implementation differences between ABAP and Java that mean you could not convert one to the other.  For instance, the whole concept of model objects does not exist in WD ABAP. Therefore, structural entities used in WD Java such as model components could not be tranlsated into anything that exists in ABAP, because the concept is redundant in the target language.
    Sorry about that, but Java and ABAP are sufficiently different beasts that such a tool is not possible.
    Regards
    Chris W

  • Adding an ABAP Web Dynpro application to a Java Web Dynpro screen

    Hey fellow SAPers
    This is an interesting one .........
    We have developed a bespoke ABAP Web Dynpro screen that we want to include into a tabstrip in a Java Web Wynpro application. We have managed to do this by inserting an iFrame into the tabstrip, and then passing the UWL of the ABAP Web Dynpro app. This works. However, life is never that easy and of course whenever the screen is refreshed, the ABAP WD app is called again and so any changes to the data on the ABAP screen are lost as the data in the ABAP app is re-selected and the data returns to it's original state.
    Does anyone know:
    - of another way to incorporate an ABAP WD screen into a Java WD screen (as a tabstrip)
    - how to de-activate a Java view so that the view containing the ABAP WD app is refreshed (i.e. the window is refreshed), the view is not refreshed and the ABAP app is not re-called .....
    - any other ideas ....
    of course, we could re-develop the same screen in Javam, but that would be too easy
    Looking forward to your responses
    Jon

    >
    > Hi Jon,
    >
    > First of all Iframe is not officially supported until 7.01 version.
    I believe it is deprecated in 7.01 and re-supported in 7.02
    [7.01 IFrame Help|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/15/c07941601b1d09e10000000a155106/frameset.htm]
    [7.02 IFrame help|http://help.sap.com/saphelp_nw70ehp2/helpdata/en/15/c07941601b1d09e10000000a155106/frameset.htm]
    >
    > Would you not use Portal for that and incorporate two iViews in a Page?
    I'm guessing you want to show this within the WDJ app not above, below to the left, right...
    This is a very very difficult thing to do - I'm guessing that you are not actively passing data into the URL of the WDJ IFrame, but just have "decorated" the WDJ app with the a statically linked IFrame. In this case the only thing you have to tie the two together is the user id that you are using - and potentially the time the app was launched. You could in theory use a shared memory area (watch out for multi app server environments) to store the state of the app in case it got refreshed... but this is not a simple thing to do...
    Consider if it is absolutely necessary to enhance the WDJ in place - hopefully you can just replace it with a WDA when you install EhP5
    Good luck,
    Chris

Maybe you are looking for