Authorization and moving employes to another organizational assignment

Hello! I have a big problem with authorization.
Lately some employes have been moved from one organizational assignment to another organizational assignment.
After moving I prepared the user and the role for this user he will be able to read infotype records for employes in the organizational assignment where they were moved.
And now I have big problem because this user can read data of employes in current organizational assignment and also data of these people in old organizational assignment, thought I didn't give him authorization for this old organizational assignment.
I checked view of table V_T582A and there in infotype 0001, 0007, 0008 in detailes the field: Access auth was checked, so I executed tests and this field was unchecked. But this test wasn't successfule.
In table T77S0 I have the following settings for AUTSW:
AUTSW     ADAYS            15
AUTSW     APPRO     0
AUTSW     NNNNN     0
AUTSW     ORGIN     1
AUTSW     ORGPD     0
AUTSW     ORGXX     0
AUTSW     PERNR     1
AUTSW     VACAU
I changed them but the tests also weren't successfule.
Please, help me, where the error can be?. Now I don't know
where I can look for the solving of this problem.
I my company we have the system:
46C
SAPKE46CB0
the latest note: LCP CE 74
Thank you very much if anyone helps me.

Hello Marta,
yes, the behaviour is corret. The old one can not see the new data but the new one the old. It's like a personal file where the new manager has access to and the old only knows what was entered up to the end of his responsibility.
This litle "picture" always helps me.
Please go to:
http://service.sap.com/erp-hcm
On the left side click:
Services for mySAP ERP HCM
- Special Documentation
In the document "Authorizations in mySAP HR (4.6C)" from page 70 chapter "4.4 Process of Time Logic" describes the behaviour in detail.
Hope to help,
Michael

Similar Messages

Error after moving user to another organiz.l unit (Edir)

I am moving users to another org. units.
For 2 users, i keeep seeing the following error in /var/log/datasync/connectors/default.pipeline1.mobility-AppInterface.log:
ERROR [Device_Thread-29] [sync:252] [userID:cn=**,ou=**,o=**] [eventID:] [objectID:] [Sync] Fatal - unable to find folder object for folderId = 2
Any idea?

If you are moving users around OUs/Orgs then you will need to remove them from the connector, wait for them to vanish, move user in eDirectory, re-add to connector. As far as I'm aware this is a limitation in all Datasync connectors that link to eDirectory.

Authorization and moving to a new location

When I moved from my parents house to my boyfriends house Itunes said that my computer was not authorized even though it was the exact same computer. I was wondering if there's anyway to get around that? If I were to e-mail customer support and explain my situation would they be able to change it to only 1 computer authorized? The reason I'm asking is I have a desktop and I just bought a laptop. So according to Itunes I already have 2 computers authorized and I haven't done my laptop yet so that would be 3. My boyfriends getting a new desktop and I was wanting to authorize his so that would be 4 computers. What ***** is I'm moving out of state soon so if I had 4 computers authorized already when I move it's going to say they aren't authorized and I'll only have room for 1 more computer to be authorized. I wanted to authorize the computers I wanted authorized and deauthorize the 1 since it's the same computer before I move so I can listen to my music on my laptop or the desktop but I don't want to have it say they aren't authorized when I move. Also I'm not moving for another 2 months or so. Any ideas? Hopefully this wasn't too confusing lol.

ok I think I understand now lol. This stuff can be a bit confusing. So what you're saying is let's say I have 4 computers authorized I can deauthorize and then reauthorize them as many times as I want in a year but if I have 5 computers I can only deauthorize all and then reauthorize all once a year? Is that what you meant if so thank-you for answering my question it is solved.

Saving project on one mac and moving it to another

I saved a project on a macbook with '08 and tried to transfer it via a usb thumb drive and when i plug it into my imac with '09, it says that the file type isn't supported and then an abort button. What can I do?

Tyler Parker wrote:
It is MS-DOS (FAT).
that would be the problem, GB projets are in a format specific to a mac formatted volume.
Should I reformat to avoid this kind of problem again?
yes
WIll I be able to use it on both Mac and PC if I do reformat?
no, i do not believe so. macs can read windows formats, but windows can't read mac formats without third party software of some kind
you'd probably be better off getting another inexpensive thumb drive to use on the windows boxes (here's a 4 GB drive for around $13)

Trouble with drag and moving files to another computer through network.

I have a user trying to move a(any) files from his lion laptop to his snow leopard office desktop through the network. He has no problems with moving the file from snow leopard to lion, its the other way around that doesn't work. When he first moves the files, it instantly creates the ghost file on his office desktop, it then prompts Keep both files, stop or replace. Replace will tell you there is already one there and cannot replace. Stop will keep the ghost file that gets created but there's nothing in there. Keep both files will actually keep duplicating until you hit the "X", a few seconds will get you over hundreds of these duplicated files.
Any help would be appreciated.

Have a look here, this will tell you how to authorise you second computer: About iTunes Music Store Authorisation and Deauthorisation

Adding a menu and moving buttons

I have 6 menus that were created by dragging my video track in and selecting set assest and create chapter markers. I set the chapter markers in final cut.
The show is in 2 Acts. However, my video assest is all one continuous track with chapter markers set for each song. There are 33 chapter markers and the program created 6 menus to accommodate all of the song choices.
I created a "go to ACT 2 menu" button on menu. Selecting this button is set to go to menu #4. However, this menu has the end of ACT 1 buttons and my first track of ACT 2 as well. What is the simplest way to separate the tracks on this menu and push everything forward? I think I need to create at least one more menu to contain all of the songs. I'm not sure how to approach taking buttons with songs associated with them and moving them to another menu.
DVDSP 4
thx!!

Simply cutting and pasting the buttons from one menu to another should keep their assets and targets.
However, your description of the chapter index menu creation process sounds a little strange.
I would recommend applying the index template you are starting with to a new menu, then customize it with the number of buttons you want. make sure to keep the buttons named PREV UP and NEXT, as these names are used for the buttons that navigate between the different index menus.
Once you have customized the menu, use it to create a new template.
Now take your track and option-drag it to the button on your main menu that will connect to the chapter index menus and choose "create chapter index: make connections". This is not the button for which you should use the track as the asset.
DVDSP will ask you to choose your chapter index template. Now each chapter should show up as the motion thumbnail for each chapter button.
Hope this helps -
Max Average

Moved itunes to another disk now everything is gone

ok so my (C) disk was low on space, so I went to iTunes, and moved itunes to another drive. after I went throught that whole process, I copyed the iTunes folder from the (c) drive to the (d) drive (the new drive) and then after it had finished pasting, I deleted the iTunes folder from the original drive. I then opened itunes and it now is empty what do I do in order to get everything back? thankyou in advance.

annaliesebieberninjaaah wrote:
ok so my (C) disk was low on space, so I went to iTunes, and moved itunes to another drive. after I went throught that whole process, I copyed the iTunes folder from the (c) drive to the (d) drive (the new drive)
I'm confused.
You moved iTunes to another drive and then then you copied the iTunes folder to the D: drive?
How did you first move iTunes to another drive?
Then why did you copy the iTunes folder after that? Isn't this moving iTunes to another drive"
Hold Shift and launch iTunes.
Select Choose library... and select the iTunes folder you copied to the other drive.

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.
I don't see anything in Help that shows when you already have transfered all the files over. Why would it want to erase and sync when I already have all the music folder copied over? I didn't have an issue when I had another technician copy from one laptop to another. Home sharing is also on but not being recognized.

I suspect you only migrated the media folder instead of the complete working library. Either review the transfer process and copy over the entire iTunes folder from your old profile's music folder or see Recovering your iTunes library from your iPod or iOS device.
tt2

How can you take a photo from one event and put it in another, without dragging to desktop and dragging back into iPhoto and moving it to the event folder I want it in.

As the title says I need help on how to take a photo from one event and put it in another, without dragging to desktop and dragging back into iPhoto and moving it to the event folder I want it in. Right now when I want to move a picture from one event to another I drag it to my desktop then delete it from iPhoto then I drag it back into iPhoto and put where I want it.An example would be taking a photo from the Christmas event and add it to a specific person event. Can I do that within the events section without all the dragging. Also is there anyway I can remove duplicates from iPhoto without going through each and every file. Any help would be greatly appreciated.

Apple doesn't make it easy to do what you want. However, here's how I do it.
Select the photo you want to move and create a new Event for it via the Event ➙ Create Event menu option.
In the Event mode select the new Event with the one picture and drag it onto the Event you want to move the photo to.

What is the impact on an Exchange server when moving FSMO role and schema master into another DC?

What is the impact on an Exchange server when moving FSMO role and schema master into another DC? What do we have to do on exchange after performing a such task?
I had 1 DC (Windows server 2008 R2), 1 Exchange 2010 SP3. I install a new DC (Windows server 2008 R2). I then move all the FSMO role including the schema master role into the NEW DC. I check to be sure that the new DC is a GC as well.
I shutdown the old DC and my Exchange server was not working properly and specially Exchange Management Shell. It start working again after I turn up the older DC.
I am wondering why Exchange did not recognize the new DC, even after moving all the roles on it.
I am looking to hearing from you guys.
Thanks a lot

if you only have 1 DC, you might need to cycle the AD Topology service after shutting the one down.
Also, take a look in the windows logs, there should be an event where Exchange goes to discover Domain Controllers, make sure both are listed there. You can probably force that by cycling AD topology (this will take all services down so be careful
when you do it)
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Moving BT Infinity modem and HH3 router to another...

Typically my master socket is in the dining room and all my IT kit is two floors up. Was using HH3 as Total Broadband in my loft with ethernet connection out to my Apple Airport Extreme which ran the network - everything hunky dory but I wanted faster speed - hence Inifinty.
BT Engineer had a look at my set up, started talking of bringing in a hoist into my back garden to install new Master Socket and it just seemed easier to install in the dining room and use the HH3 as router and re-configure my network - wrong! Most devices lose contact with the HH3 on a regular basis, therefore I want to re-look at installing Infinity into the loft and revert the HH3 to a ethernet connection out to my Airport Extreme. I understand all the engineers do at the master socket is install an Infinity faceplate. I've tried replacing the loft extension with a split front BT master socket and moveed the Infinity faceplate - result; voice remains but no DSL on the white Open Reach modem.
Are there any suggestions what I need to do? The original extension had four wires connections (white & blue, blue, orange & white, white & orange) but the BT master socket only has three positions and my original master socket only has two wires connected.
Thanks, Andy

Hi Andy and welcome
In THIS POST Phil recently wrote.-
"Very proud of myself this afternoon. I'm not much of an expert when it comes to DIY but I have managed to hardwire the router from the back of my house to the office on the first floor at the front. After much contemplation, I decided to buy some external cat5e cable and run this along the same points as the SKY feed. The result looks pretty good and I can now get 37.5Mbps upstairs as well as down. Result."
Phil is very friendly I am sure if you have any questions it might be worth dropping him a PM ( philt1808 ) PM = Private Message if you click on the link philt1808 in brackets on the right you'll see SEND THIS USER A PRIVATE MESSAGE click on that.
Mention it's PC's fault your contacting him...
Edit this thread has some info on cables http://community.bt.com/t5/BT-Infinity/Master-Socket-gt-Modem-gt-Hub-Router-cabling/td-p/408439
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)

Problems with loans and partition in Organizational Assignment

Hi,
I have a problem with loans(infotype 45) when exist a partition in Organizational Assignment infotype.How can we do to calculate the proportional wage types generated with P0045 (/LBD,/LRP,etc) in each partition?
Thank you very much!!

Technical wage types of loan do not split as the wage types of Basic Pay Infotype. Can you please provide me information regarding what issue you are facing in this. Do you want your Loan Installment to be reduced as per your organizational assignment?

MSS Organizational Assignment iView not displaying

Hi,
I'm using the MSS business package.
When navigating to Team - Employee Info - General Info, selecting an employee and clicking on the organizational assignment hyperlink, nothing happens. The Org Assignment iview does not popup.
However if I go into the other links under Team - Employee Info such as Personnel Development, and choose the same employee, the organizational assignment iview does start correctly.
I'm not sure where the problem lies here or what config controls this behaviour.
Any advise please.
Regards
Mr.T

Hey Mr. T,
First off, great name.
Secondly, and to address your issue, can you say whether or not you've attempted to move (copy/paste) any of the XSS content from the default location in the PCD to another location? Any content that might use OBN and/or relative paths to call secondary content items will NOT work properly if you start moving content around in the PCD. That's not to say it can't be done, but additional steps must be taken after you've moved this content. Please comment on the current location of your content in the PCD... was it moved at all?
Additionally, it may prove useful to captur an HTTP trace during the 'failure scenario' because you can often derive the target PCD location from the entries in that trace. HTTP Watch is a free tool that works well. There are others too, just Google-search for one. If possible, paste the last dozen or so lines of the trace into a reply here and we can try to see what exactly is being called and, hopefully, tell you why it's not rendering.
-Kevin

Using Effective Dates on Organization Assignment on Contract Posting Terms

We are using ECC 5 and RE-FX
On our contracts the Posting Data Tab includes Term groups
-Postings
-Frequency
-Organizational Assignment
The Business Area associated with an Organizational Assignment needs to change (we are dropping an existing business area and rolling it into another).
Rather then going through all the contracts and changing teh business area to the new one (thus loosing history), I'd like to use the Valid From/To for the Org Assignment. So that there would be an entry from 01/01/2006 - 09/30/09 for Business Area 5600 and then a Valid From of 10/1/09 for Business area 5200.
I can do this. What seems to be missing, or not configured?, is having the multiple valid Org Assingments showing up in some reports (such as REISCN which shows only the first Org Assignment entry).
What can we do to implement the Org Assignment in such as was as to accommodate the change of business area, that does happen over the life of a business?
Thanks for your advice and suggestions!
Laurie McGinley

Then my cardinality is drastically reduced to 92K (actual 110M) - leading to Nested Loops further up the query plan....
I don't have histograms on the columns involvedIf you add histograms on the involved columns, is the optimizer picking up a better execution plan?
Also note that the problem might be that you need a combined value distribution on two columns. This is possible from 11g onwards, but not before. Check out http://www.oracle.com/technology/pub/articles/oracle-database-11g-top-features/11g-manage.html (Search for Multi-Column Statistics)

Mouse cursor moving mask over another image.

Hi, Is it possible to have where the Mouse cursor is on the page moving mask over another image. Imagine a black screen with a star cut out of the middle(where the cursor is) and u can see the image behind.
Any examples on how to do this?
Can it be done in html instead?

Create the mask and the background as movieclips and then assign the mask as the mask property of the bacground movieclip... as in background.mask = msk (where msk is the instance name of the mask).
Then assign a MOUSE_MOVE event listener to the mask and in the event handler for that listener have its x and y properties assigned to be the mouseX and mouseY properties

Authorization and moving employes to another organizational assignment

Similar Messages

Maybe you are looking for