Can we change company code in maintenance order

Hi All,
We have changed the maintenance plant of Equipment from 1100 plant to 1200 plant.
Planner group is by default appears in work order once the technical object is selected in order creation.
Can we change the planning plant and company code in maintenance work order?
Thanks in advance
Surya

Dear Friend,
you moved equipment from one plant to other plant, but company code is same know.
Actually its not possible to change the company code in maintenance order.
once you shift any technical object from one location to other location, do change the technical object materdata also.
for your question you change the equipment masterdata so that u new planner group will triggeer in main.order.
Regards,
pardhu

Similar Messages

BAPI for Order Change - Company Code

Hi,
Which is the BAPI for Order change? Suppose the order is Open, Can i change the company code of the order?

have you tried this ...BAPI_ALM_ORDER_MAINTAIN

Additional field(company code) in purchase order screen layout

Hi All experts,
I have a requirement to set the company code in Purchase order as display field during PO creation or change.
I have checked in IMG under screen layout for purchase order but there is no company code field available.
How can I add the additional field into the screen layout.
Any inout will be highly appreciated.
Thank you in advance
Lost.

Hi Chee Wan Ng,
Where exactly you want to set the Company Code field in the Purchase order? Actually this field is already available under Org.data tab in the Purchase Order Creation transaction (ME21N), so you may not require to set the Company Code again.
Which version of SAP R/3 you are using?
Hope this helps you, if not, then give us more details to help you better.
Good luck.

Re: IMpact in changing company code to company relation not during monthend

Hi Guru
I would like to know your opinions about the impact that may arise in changing company code - company relationship during the mid month(not exactly mid month - anytime expect month end )? If there is an impact what would be the best approach. We suggested to the change at the month end and do the month end activities ..but due to management decision, situation may appear where it needs to be done during the month . They have inter-company transaction .
Here is the scenario :
Company A has 1,2,3 and 4 as it's company code . The company code 4 now needs to be linked to a new company B . How can this be done during the middle of month ? How to get the reports for new company A and Company B and make sure the entries are correct one .For example on 18th of month company code 4 is been moved to company B. how will the assets depreciation will be posted that will reflect in Balance sheet . Let say total depreciation for the month is 300$( 30 days in month). I believe this will show up in both company B/L sheet as 300$. We are looking to differentiate 180$ being posted to Company A balance sheet and 120 to be posted to company B balance sheet .Your input on this will be highly appreciated.
Thanks
Gobi

Hi
Transaction OX02 changes the name.
It is not easy to change your company code to a new one.
You would need to copy your existing company code to the new one and go through the IMG and verify all settings. Then reconfigure all the modules that are using the old company code like purchasing, sales, etc. to point to the new code. Finally, you would need to transfer all the legacy data. Therefore it is far easier to keep the existing company code but give it a new text name.
Copy all the customization in a new client, no transactions and no master data. So youll have the same settings with your live system.
Created a new company code with the new currency, and copy all the customization. This step was to minimize step in re-customization.
Uploaded all the master data...and do a new transaction
The suggestion is don't do that in a live system or else youll have a big problem then.
Message was edited by:
SHESAGIRI.G

BAPI for cross company-code stock transport order

Hello experts,
I need to create cross company-code stock transport orders, is there any bapi that can perform this? If you guys have some sample code it will be great.
PD: i found the bapi BAPI_PO_CREATE1, but i don't really know if it'll work for this requirement.

Hi Team,
I have created two company codes 5000 and 5005 and then assigned the plants 5000 and 5005 to company code respectively.
Here my supplying plant is 5005 and receiving plant is 5000.
Also I have created a vendor 1000 with account group 0007 and assigned the supplying plant 5005 to it.
1. How do we assign sales and distribution (SD) organizational units to the supplying plant?
2. Whether we have to create customer master (using Tcode XD01) for the supplying plant?
3. While creating the customer master, the company code and sales area (sales organization, distribution channel, division) must be of supplying company code / plant?
4. Whether we have to create customer master for receiving plant?
5. While assigning the customer master to plant, which sales area info (sales organization, distribution channel, division) has to give?
Please give the detail from customer master creation and assigning it to plant.
Thanks in advance,
Regards,
Shyjith
REPLY -
Hi Shyjith,
1. Create vendor 1000 as internal vendor in company code 5000 & assign supplying plant 5005 in additional data in Purchasing tab.
2. Create receiving plant as 5000 as internal customer in company code 5005 & respective sales area of 5005 , if you have no other numbre range for internal customer.
3.In SPRO do the following settings,
a.efine shipping data for both receiving & supplying plant --- SPRO - MM -- Purchasing -- Purchase order --- Set up stock transport order -- define shipping data for plants
b. Assign delivery type as NLCC to supplying plant 5005.
Craete Purchase order with vendor as 1000 & plant in purchase order as 5000 ( If not defined any external number for customer)
Please note if you have defined external muber for customer 5000, the n you have to define that number, when you will be defining shipping data for receiving plant as customer.
Thanks,
Charu

Not able to change company code in CNMASS after cost planning/Budgeting

Hi experts,
After cost planning in my project, i was trying to change company code through CNMASS,
but system is not allowing me to do that.
Is there any notes/alternate solution, through which i can change the company code after cost planning or budgeting.
Thnx in adv.
Redards
Ashis

Ashis,
Company code is not changeable once planning, actuals, commitments or budget values exist. This is independent of the trx you use to change it: it will not be able in CNMASS, in CJ20N etc...
You need to undo any postings before changing the company code.
Hope this helps
Martina

How to change company code in cost center master

Hi,
Can anyone throw me the light about how to change company code in cost center master? User make some mistake. They maintained wrong company code in cost center master and there are some transactions already posted to this cost center. I would appreciate all attention and point will be reqard. Thanks much
Best Regards,
Bird

Hi,
The cost center master data fields have time dependancy. Following are the details of time dependancy.
You can maintain master data for cost centers, cost elements, activity types, and business processes as time-based. Changes to any other time interval are possible at any given time. Data storage is also time-based. In this way, you can store multiple database records for a master data record, each holding different information.
The time-based dependencies are determined by SAP and cannot be changed. The following dependencies are possible:
Not time-based
Day-based
Period-based
Fiscal Year-based
Cost Center's company code field's time based dependancy is Fisal Year Based and hence, the company code can be changed on cost center only on new fiscal year. And hence, system will not allow changing company code on cost center master data until new fiscal year if transactions are posted to the cost center.
You may have to think of work around :
1) Create new cost center with correct co code
2) Repost the cost posted to old cost center (with wrong co code) to the new cost center.
Explore the possibility of this work around on your system with the key user and then see whether this option works out.
Hope this helps. Pls. assign points if this is helpful.
Regards,
Chirag

How to change company code currency after psotings have been made

Hi,
Good day! May I ask for your expert advice about changing company code currency? Is it advisable? or is it at all possible? If so, do you have a procedure for this? Thanks in advance.
Regards,
Peter

Dear,
no this is not advisable.when You decide to create a Company, You have to decide which kind of currency You have to use for it. This is an asset. Therefor You have to take the correct decision before going live.
Now You can think to activate a parallel currency( transaction OB22), but please have strongly a look at the note 39919.
If You strictly wants to change the currency, You could refer to SLO service into SAP Market place.
Go Service Market Place homepage or Sapnet
http://service.sap.com/slo
I hope this helps You.
Mauri

HT5071 I am putting together a book with iBooks Author and all of my pages are numbered (3) how can I change them to an acceding order starting with page one?

I am putting together a book with iBooks Author and all of my pages are numbered (3) how can I change them to an acceding order starting with page one?

Sorry I didn't get the tip link right: Change page number style

SRM 7.0 & Ordering for stock / inter-company-code stock transport orders

Hello SRM Colleagues,
We are implementing SRM 7.0 used with ECC 6.0 and the client has the requirement to be able to order goods for stock and to initiate the inter-company-code stock transport orders (which I mean is actually and MM standard function).
Any advice about this topics please?
Thanks in advance,
Michal

Hi Michal,
The client want's to use SRM as a tool for issueing all requisitions among the company and transfering it to ERP.
Seams, there will be limitations.
Does this mean that your client will not use ECC MRP for planning the intercompany requirements. This is just for my calrification.
IF you are using calssic scenario there will be limitation while you create SC for the intercompany requirement, as it is required to falg "Order as direct material"(for direct stock procurement) in the SC system starts treating this as a extended calssic scenario to overcome this you have to enhance and trick the system by assiging as dummy cost object to SC cart in the background and strip off the cost object while sending the SC to ECC for creating PR or PO as per your client requriement.
Is your client requirement only restricted to inter company procurment using SRM or do they want to use SRM for all direct procurement(project stock, consignemnt, subcontracting). Irrespective of Classic to Extended classic SRM will not support out of box all the specail procurement scenarios.
with regards
Manjunath

If an employee changes Company code,how his YTD cumulations in CRT table calculates as per SAP Standards ?

Hi All,
Please help me out in understanding below scenario.
If an employee changes from one company code to another code, how his/her YTD cumulates in CRT table as per SAP Standards.
Let me go with example to make a clear understanding.
Ex : Payroll has run for an employee upto payperiod 05. As per his pay assume that his /101 is 5000.
                         Monthly                  Yearly
PP 1      :           5000                       5000
PP 2      :           5000                      10000
PP 3      :           5000                      15000
PP 4      :           5000                      20000
PP 5      :           5000                      25000
In PP 6 he has shifted from one company code to another company code. Now, how the system cumulates as per SAP standards ?
PP 6       :           5000                        ?
Will the amount nullifies or else adds to previous PP5 ?
Thanks in Advance....

Hi Ameet,
I understood the same. But my client is asking that the amount should nullify in CRT table for yearly when an employee changes company code.
And they have maintained different tax grouping for company codes in table v_t7ph0a. will that table makes any difference ?
Regards,
Nalini.

Change of GL code in Maintenance Order

Dear All,
We have got a requirement that when stores is issuing maintenance material against reservation created through a maintenance order the default GL consumption Ac debited is " Consumption of Stores and Spares Indigenous " , instead of this GL code " Repairs & maintenance " GL code should be hit .
How do we configure the same in system. Useful answers will be rewarded with points.
Regards
Milind Nair

Hi,
Thanks for the reply but if I do the changes it will be at company code level , I want the accounting effect to occur only in case of material consumed against maintenance order that too for some specified plants only.
In case stores are consumed against production order then it should not hit repairs & maintenance but it should hit stores and spares consumed . Hope I am clear pls get back if you need any further clarifications.
Regards
Milind Nair

Can change company code in FV60

Dear experts,
i m totally new for SD billing side, i parked a entry in different co code and now i want to change the respective co code. Is this possible or i want to reverse that entry.
Regards,
Jagdish..

Hello,
I believe you are taking in reference to vendor invoicing.
I think you can reverse the entry made to a company code let say "XX".
Please free to revert if you still face any issue on this.
Regards,
Sarthak

Can we change gl code in already existing Purchase Order

Hi All,
By mistake we have entered wrong gl code in account assignment tab of PO and saved.Can we change the gl code now. If not what is the solution.
Thanks,
Kumar

Hi,
If there is no Follow-on documents you can change the G/l account number in Me22n T.code.
Regards,
JS

Is it possible to change Company Code in Cost center, once postings done?

Hello Friends - We have Cost center created in CoCd 0001 and made the postings and this year beginning CoCd in Cost center was changed from CoCd 0001 to 0002 for some business reasons. Now, User says that he needs to post one journal to this Cost center in CoCd 0001. As this Cost center is in another CoCd, It cannot be used in CoCd 0001.
Please suggest me that if it is possible to change and the process to change the CoCd in 0001. Once journal is posted, we will put it back 0002.
Thanks

Hi Hoysala,
Please refer to the following note Note 62716. These three prerequisites must be met:
1. The change interval is set to period limits
2. There is no dependent actual transaction data in the change interval or afterwards.
3. There must already be an analysis period for the respective cost center which starts on the first day of the chosen period. If this is not the case, you can create one with 'Change cost center' - KS02
(for example, by changing the cost center manager).
You may use transaction code rkacshow to check the transactional data that exists on the affected cost center, in order to change the company code, all these data should not exist for the time
interval.
Regards,
Jose

Can we change company code in maintenance order

Similar Messages

Maybe you are looking for