Can we see costing value for line item batch in Batch Information Cokcpit r

Can we see costing value for line item batch in Batch Information Cokcpit report - BMBC?
Business like to see standard cost/ item and extended cost which should be qty in inventory * standard cost.
Help appreciated.
Edited by: Tom_Eric on Jan 13, 2012 2:33 AM

HI.
YES it is passible.
If the GL is activated line item display check box is active then we can able to see the data as per line items.
T<Code. Fbl5n
Thanks.
Vasu
Edited by: Vasu Enaguthi on Apr 7, 2010 8:46 AM

Similar Messages

How can I see planned values for services in PS reports?

Hi experts.
We are implementing PS for a mining company; in our process, project designers plan materials and services in networks and then get planned values for budget requests.
The problem I am facing is that I cannot see the planned values from services in the plan values reports. No value is exhibited for version 0 if I plan only services in a network. For materials planning I can visualize planned values normally. The network is not released. On example of planning values report that I am using is s_alr_87013533.
Does anyone know how to correct this problem with PS configuration?
Any help is welcome. Thanks!
Rafael

for planning services I am assuming that you are using service activity
check if determine plan cost is set up in the network header
secondly make sure that the plan costing variant is set up with the valuation variant to define where to get the plan values from

Can we change pricing date for line item in billing

Hi Expert,
Can we change pricing date , while raising inoice for particular line iteam

Hi,
We can not change the pricing date for perticular line item at billing document level, the only option is we can enter the required date at the time of invoice creation in VF01 screen.
If your requirement is copying the same pricing date that is entered at sales order, then do the following.
Go to T Code:VTFL and choose your DElivery Type and Billing Type, then choose your item category and then change the pricing type as 'D' .
Regards,
Pasapula.

Table for line item in F-47 Display Document - Down Payment

Hi,
Can anyone please tell me from which table can I pick the values for line items. I'm developing a report in smartforms for down payment request. For header items I found out that the values are stored in table - BKPF.
Please help..
Regards,
Sriram

Hi,
Go to Logical database through SE36 and give KDF for vendor and DDF for customer. You will get the details of tables there.
Regards
shankar

Fetching unit_of_meaurement value for each item

Hi ,.
I want to fetch the value unit_of_measurement (MSEHI) value from table T006
for each items
I havent find any linakage
How can i read these values for each item
Thanks
Anil

I have a material number say, Grumpy. The report that I have shows the total sales for Grumpy for $13,000.00. Grumpy has other submaterials number says Grumpy_1, Grumpy_3, Grumpy_4, Grumpy_5. The report only shows the total quantity sold for each of these submaterials. Say
Grumpy_1 = 800
Grumpy_3 = 70
Grumpy_4 = 1
Grumpy_5 = 33
I want to find a way to get an IO that tells me a price sold for 1 quantity, so that I can use it to find the total sold for Grumpy_1, Grumpy_3, Grumpy_4, Grumpy_5 that will add to equal $13,000.00
Thanks
"Sometimes I need what only you can provide: your absence." ~ Anonymous

How can i decide candidates for line item dimension?

1Q): we have many infocubes out of all these infocubes, i have to decide which infocubes are the candidates for lineitem dimension? How to do it? Please tell me the technical specs how to do the analysis to find out the candidates for line item dimension?
2Q): if i have the small dimension can i combine all these dimension in to one dimension? what is the benefit of doing this? how to find out which dimensions are small?
Pizzaman i like to hear from you on this topic. Thanks to SDN Community. i appreciate your help. Again Thank you.

The process of figuring out what you might want to create as a line item dimension can vary a bit, it can depend a lot on your exisitng level of domain expertise (how well do you know the data in question). If you are familiar with the data, I would recommend you just take an initial guess at what you believe could be line item dimensions. If you are not familiar witht the data, you might want to examine the source more to understand the cardinality of different characteristics and identify any relationships between characteristics.
I really encourage people to just go ahead and model it and load some data and review, rather than agonizing over developing the theoretically perfect model on paper before they start. You learn a lot more that way.
Any of the SAP rules of thumb, are just that, general rules, not a pronouncement from God. There are always extenuating or unique circumstances that might warrant disregarding the rule, e.g. if the InfoCube will never become very large, maybe some of the concerns just are not worth your effort.
With every release of the Oracle (and the other DBs too)Oracle keeps getting better at data warehousing and star schemas. Oracle 10i is supposed to have made handling bitmap indices much more efficient, which is on of the factors influencing the decision to create a line item dimension.
There are other threads on SDN on line item dims that provide more technical detail and can help answer you first question
As far as 2Q - generally, it's better to have several small dimensions than one larger dimension. But having said that, combining a few very small dimensions into another slightly larger (but still small) dimension is a good idea. It keeps the number of table joins down which will improve query performance. You would do this with characterisitcs that have very few values, e.g. yes/no indicators.
e.g.
You have 8 characteristics that all of which have only two values. You put them in one dimension, and the max size of the dimension table is still only 2x2x2x2x2x2x2x2 or 256 rows. If you had these characteristics in other much larger dimensions, it's not hard to see it causing those dimensions to double, perhaps creating hundreds of thousands of dimension table rows to be created.
For more - read <a href="http://www.kimballgroup.com/html/designtipsPDF/DesignTips2003/KimballDT48DeClutter.pdf">Ralph Kimball Design Tip 48 - Junk Dimensions</a>

Can anybody tell me how to extract sales value and cost value for an materi

dear all,
Can anybody tell me how to extract sales value and cost value for an material sold .
All the values of cost value and sale values are getting stored in bseg-wrbtr field .
How to identify them uniquely.
Or there is another way to find the sale and cost values.
Regards
Mave

Hi Mave!
Normally there is no condition change, when something is sold.
But sales price depends on sales conditions (not only price, but also surcharges, discounts, taxes - if customized).
Nevertheless, after selling you have a invoice document, where correct values should be stored (see VBRP fields mentioned above). If here is a problem, then customizing of price determination is in question, not a programming of user-exits with MARD selection for costs (or some other tries to get a price).
When you specify your requirements more in detail, you might get better answers - but currently only general hints are possible ('see in invioce / G/L accounts').
Regards,
Christian

In a sales order, entering the cost center field for line items

In a sales order, the cost center field for the tab 'account assignment' of line items is suppressed. Is there any possibilities to open the cost center field(for line items)?

Hi kim,
You can do this in Account Assignment Catagory..
Hope this helps.
Regards,
Sree

Free of cost supply for Rejected item

Dear All,
Please help me in the following scenario :
a. A line item ( Imported item )rejected by quality .
b. For that rejected item foreign supplier send us the same material in free of cost . No need to pay for that item.
c. I paid the freight and customs duty for both rejected item as well as for free of cost item .
My questions :
1. How to make GR for free of cost in the same P.O ???
2. How to account the customs duty and freight that has been paid twice for the same item ???
3. Can i avail cenvat facility for both item .???
Please clear ....
Cheers,
Somu

Hi
If the PO is not taken into GR then add the item once again in the PO and chec the FREE GOODS checkbox. By this check the GR taken will not affect the cost of this item.\
For the double payment made already , you can create a credit note for the vendor in MIRO [Subsequent credit], by choosing the amount and entering the articles.
On confirmation of MIRO the value will be reduced from these articles in proportion which was actually increased due to double payment.
Hope this helps.
Regards
Govind.

Adding a characteristics to AR Drill down report for line items

I have raised an OSS note on this, but they deem this to be consulting.
I have an AR drill down report for line items
It calls the structure RFRRD20.
I need to add a value into the characteristics so I can use it in the drill down report.
I have appended the structure, added a value in TKAF for the field, and it still does not show.
Has anybody done something similar?
I am sure this is easy, but only when you know how, so if you know how to do it please can you let me know.
thanks
Mark

Hi Mark
    I am also in the same situation where i need to add two characteristics (invoice date, due date) to the AR drill down reports. I added them to the structure and TKAF table as you did, but still could not get them to the drill down reports (FDI5 or FI1).
   From your posts, i see that SAP's response was that it is not possible to add characteristics to AR drilldown reports? Did they mention any reasons or OSS notes? How did you handle your requirement, were you able to work around?
   Your suggestions would be highly appreciated.
Thanks
Vamsi

Offline approval for line item based Shopping carts

Hi ,
We are planning to use offline approval and line item based approval (item based approval workflow) for shopping carts.
For e.g. 10 line items in a cart can have 10 different cost centres, and a line each need to go to respective cost centre managers for approval.
have few clarifications:
1. Can offline approval be used for item based shopping cart approval workflow?
2. Can different line items be sent by mail to different mail boxes?
3. Will 1 manager see all the 10 line items OR only the 1 line item for which he is responsible?
4. If he will get only line for which he is responsible , and once he clicks on approve , will this approval apply to his line item only , OR it will apply to all the 10 line items ?
Rgds
Sumendra

Hi Sumedra,
Which workflow are you using - application or process contrlled workflow?
Assuming you are using process-controlled workflow - I will answer following questions -
1. Can offline approval be used for item based shopping cart approval workflow?
- Yes, it can be used !
2. Can different line items be sent by mail to different mail boxes?
Yes
3. Will 1 manager see all the 10 line items OR only the 1 line item for which he is responsible?
1 manager can 'see' all the items but he can only approve or reject the item that he is suppose to act on. All other item will be grayed out. However, this behaviour is configuarable !
4. If he will get only line for which he is responsible , and once he clicks on approve , will this approval apply to his line item only , OR it will apply to all the 10 line items ?
- see above
Regards,
Amit

Service Order Planned Costs and Cost Center Planned Line Items

Experts,
I am curious of Service Order Planned costs, and whether or not these planned costs are being posted to the Cost Center linked to the Service Order Operation's work center.
I am a but puzzled as I don't see any planned costs from any Service Order Operation in a cost center linked to the Operations work center, when reviewing "Cost Centers: Plan Line Items" report.
BR,
Cenk

The planned costs were input in one of the Service Order operations as planned hours. There is a column for it in the operations list. The amount of hours have incurred a planned cost on the Service Order header.
I simply assumed that this cost would be credited to the Cost Center linked to the operation's Work Center. But that is obviously not the case. I am not familiar with the PLICC field and the functionality it provides.
Thanks!

I want a push button for line items in my sales order entry screen.

Hi,
I want a push button for line items in my sales order entry screen.
How can I do so?
Thanks.

Hi Kumar ,
To have a push buttons you need to first assign a pf-status .
here a sample code for a push button and its handling :
set pf-status 'SELECT' .
at user-command .
describe table t_lpr lines w_lines .
case sy-ucomm .
    when 'SELECTALL' .
      set pf-status 'SELECT' excluding 'SELECTALL' immediately.
      do w_lines times .
        read line w_line field value w_check . " INTO W_CHECK .
        if w_check = space .
          w_check = 'X' .
          modify line w_line field value w_check.    "INTO W_CHECK .
          add 1 to w_line .
        endif .                        " IF W_CHECK = ' '
      enddo .
Thus when you say pf-status say 'select' , Double click on that and you find a screen eher you can select icons and assign a function code to it!
Hope it helps!
Much Regards,
Amuktha .

OBBH Substitutuions for line items.

HI,
We are trying to assign cost centers for GL accounts using FI susbstitution rules ( OBBH ) in exit routine ZGGBS000 ( RGGBS000 ).
The BSEG and BKPF ( line item substitution ) values are populated when the routine is triggered however we also need VBAP values too, they remain empty. Is there a way i could get the VBAP values filled too.
Thanks.

Ok. Inside the exit we have BSEG and BKPF values populated and looping depending on the line items.
For Ex : for line item 1 when the control comes in the exit, VBAP values are not populted whereas the BSEG values are populated.
I needed VBAP values to cross reference the GL account. On certain material divison i needed to populate cost center.
My problem was addressed using a user-exit.

Define Additional Fields for Line Item Display

Dear gurus,
I'd like to ask for your help again, please. I've just added the field BKPF-USNAM to the list of fields of FBL1N using IMG:" Financial Accounting-> Accounts Receivable and Accounts Payable->Vendor Accounts->Line Items-> Display Line Items->Define Additional Fields for Line Item Display". When I run the report the field is correctly displayed but if I save the current layout and set it into the selection screen, the column appears is blank. And if I open the change layout window and click OK the column gets filled.
Is there another transaction that I must set new columns to FBL1N.
Thank you very much.
Paresh Jivani
Edited by: Jivani Paresh on Jul 31, 2009 9:16 AM

Hii,
When you will execute FBL1N, it will come up in standard format. if you want to see any specific fields,then you have to go to Change Layout button and choose from available fields as per your requirement and then execute.
For future reference, you can save this layout as a Variant and then you can directly execute that report using that variant.
Dhara D.

Can we see costing value for line item batch in Batch Information Cokcpit r

Similar Messages

Maybe you are looking for