CFM2 transaction in R/3
I am working on a user exit in APO , which gets triggered with CFM2 transaction . After activating a model with CFM2 TCode in R/3 , a logon screen is opened with my id and its asking for a password in APO system. I tried to enter my password it didnt accept and now it gives an error saying " password logon no longer possible- too many failed attempts " .
Is that anything to do with RFC connectivity . Do we need to take help from basis so as to automatically connect to SCM system.
deepthi raj,
CFM2 will try to reach the logical system (we enter as parameter) and activate integration model. This problem may come if:
The RFC destination defined for that logical system is having incorrect logon id / password of the apo destination (or a blank id password). This will prompt for an id password on the screen. this user id should be having aleremote equivalent authorization. so probably not work with your id.
You need yoru basis team to ensure in SM59 that correct useid / password and ensure the remote logon happens OK from the same screen.
this won't pop up any screen in CFM2 and work normally.
rgds,
SB.
Similar Messages
-
Multi-level error propagation during the execution of CFM2 transaction
Hi,
We are implementing SAP SCM 5.0 integrated to SAP R/3 Mills IS.
During the execution of CFM2 transaction, while trying to activate the integration model for the object u201COrdersu201D for the very first time, the following error message appears:
*"Multi-level error propagation carried out".*
There are also messages related to inbound queues blocked. In the case of maintenance orders, CIF_MNT_INBOUND message shows up. While working with Production orders, CIF_ORDER_INBOUND message emerges.
The items listed below should be taken into account:
-The production orders that are meant to be transferred to APO are regular production orders corresponding to several products.
-We are working with configurable materials.
-We are working with the active model (000) and for each plant we are using 2 different planning versions.
Regards,
Analía NahmíasDear Analía,
The corresponding error messages issued when executing //CCR indiacted the peg-ids are missing in liveCache.
Recommendations:
-Run transaction /SAPAPO/OM17 to check the internal consistency between database and liveCache within SCM system. Correct the inconsistencies
-Execute report /sapapo/cif_deltareport3 to correct the inconsistencies between ECC and SCM system
Regards,
Tibor -
Transaction code for product master - SNP
What is the significance of CFM2 transaction and EXIT_SAPLCMAT_001 user exit.
SAP Transaction Code: CFM2
Filename: C-F-M-2
SAP Program / SAP BW Program: RIMODACT
SAP Transaction Code Description: Manually Activate Integration Model
SAP Transaction Code Tag: CFM2
SAP T-Code ID: 989
You may also be interested in the following (previously listed) SAP Transaction Codes:
988: CFM1 - Create Integration Model
987: CFI02 - Import Objects from cFolders
986: CFI01 - Import Documents from cFolders
Finaly the following SAP Transaction Codes are subsequently listed:
988: CFM3 - Create Integration Model
987: CFM4 - Import Objects from cFolders
986: CFM5 - Import Documents from cFolders -
Old transaction data in CIF transfer
Dear friends,
After creating integration model for a given material and also ticking all the transaction data in integration model i am able to automatically transfer everything to APO.
But for the same material there are many sales orders and its reciepts which were earlier planned in R#. now those data should be flown to APO after creating the integration model.
but that is not happenning. Pls suggest me if there is any badi to allow that.
Regards
vinayHi Vinay,
I am wondering because as soon as you create a integration model for
transaction data of a material, all data available in R/3 like sales order,
receipts has to go to APO. There is no separate BADI required for that.
I suggest you to try the following.
1) repeat rerunning the model
2) Did you try CFM1, CFM2 transactions or RIMIODINi, RIMODGEN, RIMIDACT
programmes.
3) Check whether all queues are cleared.
Do confirm your observations
Regards
R. Senthil Mareeswaran. -
hi gurus
can anybody tell what the settings requires when we sned the data from R/3 to APO or R/3 to BI. so How the data can passess form R/3 to APO. what are the different types tools we are using here to trasfer the data from source to target.???
i mean to say what are the setting we do in R/3 when the data can transfer to APO.Hi Dallyanusha,
For transfer of data from R/3 to APO, we use Core interface (CIF).
You need to create integration model using CFM1 & CFM2 transactions
so that integration models get generated and the data will get
transferred to APO.
You need to maintain customisation settings for data transfer
both in ECC and in APO. (under integration of SAP components)
Regards
R. Senthil Mareeswaran. -
Hi
Can any one explain what is parallelized transfer in the screen CFM2 transaction(activation or deactivation integration model). What is the use of this and how we can use for better performance.
What must be the values for
1.Absolute Max no of process
2. Relativemax no of process
Please share if any one has used this option.
Thanks and regards
VIjayaHi Vijaya,
When we carry out integration model run, we used to carry out transfer of objects sequentially.
This option is useful to carry out paralleized transfer of more than one or more objects at a time.
If you set this indicator, the ERP system selects objects that are to be transferred to SAP APO in parallel in different work processes. The parallelization takes place with reference to the blocks of a filter object type. Each work process processes a filter object block.
You specify the block size (that is, the maximum number of filer objects to be processed per block) using transaction CFC3 as before.
Parallelized selection can lead to a significant increase in performance.
If this indicator is not set, the ERP system selects the objects in serial.
The performance of the initial data transfer is not only determined by parallelization, but also by the size of the filter object blocks. If you specify a large block size in transaction CFC3, only a few blocks may be formed within the filter object type. This means that only a few work processes can be parallelized.
However, for smaller block sizes it is possible to have a higher degree of parallelization although only a small number of objects are transferred to SAP APO per block
If you would like to optimize the performance of the initial data transfer, you also have to take into account the size of the filter blocks in addition to parallelization and adjust your system depending on the data being transferred.
In general, in most of the projects, they prefer sequential transfer rather than parallel transfer in which there will be some uniformity in transfer process and any errors caused during transfer can be identified and actions can be taken online for those objects. If you transfer all in one shot, error analysis will be very challenging one.
Regards
R. Senthil Mareeswaran. -
SAP eWM: Integration Model error during transaction CFM2
Hi,
I am new in eWM and i am trying to transfer the material master, plant, shipping point, vendor and customer from SAP ECC 6.0 to eWM 5.0.
I am getting this message:
Inbound Queue is Blocked
Queue for Current initial Data transfer is deregistered
Target System : SCDCLT100 (My eWM system)
Can someone help me to fix this problem so i can move on?
I will realy appreciated
Thanks & Regards
BoubaHi Sharad,
Thank you very much for your reply.
I was able to execute SMQ2 in eWM but i was not able to understsnd why the the product, vendor, customer,.. are not yet created in eWM.
The status is Ready and when i executed, i got a system fail status.
When i double click on the line i got this message:
Business partner 0000000511: no arrangement(enclosure,appendix) with this. 0000000511 is the vendor i created in ECC 6 and i also link my plant to this vendor.
Can you help me again to understsnd the root of the problem?
Thanks & Regards
Aboubakar -
CFM2 - Table does not exist in database.
Hi Gurus,
I am new to EWM & facing one error while transferring Inbound Delivery to SCM EWM from ECC.(T Code - CFM2)
Please also note that, 1.I could transfer the master data through CFM1& CFM2 from ECC to EWM
2.Inbound delivery created in ECC is showing "distributed" status.
Please see below the screen shot where the error message is occurring.
Kindly also let me know apart from CIFing what are other ways to transfer transactional data to EWM from ECC ?
Thanks in advance.
Regards,
Dinu JHi,
I'd like to add that delivery data is transferred via QRFC. The integration can be maintained in the ERP customizing. EWM relevancy of a delivery will be determined based on plant/storage location.
Best regards,
Christian -
Error while activating IM in CFM2
Dear Friends,
I would like to have a solution to the folowing problem.
I've tried to activate integration models in ECC with transaction CFM2.
I've build several integration models for class, customer, masterdata and transaction data.
When I try to activate one of these integration models the system gives the next error message:
inbound queue blocked
Function/Q/SAPAPO/CIF_CBASE_INB
Text: Reference product has not been classified
This error is only coming for configarable material, for non configurable material I am not getting this error.
Is there any setting?
I would like to know what causes the problem and how to solve this problem.
I hope to receive an answer soon.
Thanks for the help!
kind regards,Hi Gowda,
1) Check the class maintained for that product
2) Check the characteristics are created correctly and
are assigned to the class
3) Check the classes and characteristics are assigned
to the material master in R/3
4) Check the classes and characteristics are ciffed
prior to products
5) Check SAP note 527486
Regards
R. Senthil Mareeswaran. -
Transaction for activate the integration model
hi,
i created integration model using cfm1 transaction , how to activate the model ? in which transaction.
regards
muthuraman.dHi Mathuraman,
you can use the transaction CFM2 to activate your generated Integration Model. This transaction is used both for activation and deactivation of the Integration model.
For Initial transfers you can use the program RIMODINI also.
Let me know if it helps.
Regards
Gaurav -
CFM2 Activate the Integration Model
Hi Gurus,
I have created the integration model using CFM1 and when I try to activate the Integration Model in CFM2 I get an error "OUTBOUND QUEUE BLOCKED".
SYSTEM: PAPCLNT400
FUNCTION: /SAPAPO/CIF_PROD_INBOUND
TEXT: THE ABAP/4 OPEN SQL ARRAY INSERT RESULTS IN DUPLICATE
I am getting this error in Production, but when I try it in QA System it works fine.
I am unable to figure out the issue.Please help me with the solution.
Thanks,
DeepthiHi Deepthi,
Try these steps for analysing the error.
Run transaction CFM2 and you will come across the same error (THE ABAP/4 OPEN SQL ARRAY INSERT RESULTS IN DUPLICATE).
2) Go to APO and run transaction /SAPAPO/C3.
3) In TIME RESTRICTION Section on the screen enter tentative time the error must have occured (This step is more from getting nearest log that has been written)
4) In the LOG CLASS select "Only Important Logs" and then execute (F8).
The log will get generated and will provide you some input for your analysis.
Hope this helps you.
ASHUTOSH -
Problem USING EXIT_SAPLCMAT_001 with TA CFM2
Hi SAP Experts,
I'm facing a problem with exit EXIT_SAPLCMAT_001 when using transaction CFM2. If I change the material the changes done by the exit are passed to the SAP APO system but if we activate material cif through transaction CFM2 the changes are not passed to the SAP APO system. Thanks and BR.
I'm trying to change the field fxhor of table IT_MARC.
Mauricio.Dear Andy,
Thanks for your inputs. Actually I was first of all deactivating the only one existing IM for the material and them activating it. Regarding the logic conditional I'm not sure about it, how can I check?
Thanks and BR
André -
Dear Experts,
We are getting following error when we start activation from transaction /CFM2
Outbound Queue Blocked
System: CAQCLNT001 User: SAP_ADMIN 05.02.2010 10:33:1
Function/Q/SAPAPO/CIF_PROD_INBOUND
Text: Logical system CCQCLNT224 has not been assigned
How can we fix it,
Best Regards
Edited by: Wilian Segatto on Feb 5, 2010 8:04 AMThis error is because logical system is not assigned to Business system group.
First ensure that you are using correct logical system name while creation and activation of integration model.
If it is correct go to path SPRO-integration with sap components- Integration via core interface-Assign logical system and queue type assign this logical system to proper buisness system group.
Hope this helps.
Santosh -
Error while comitting a transaction in oSB. The following is the error stack
Error while comitting a transaction in OSB. The following is the error stack
<Apr 20, 2015 12:00:15 AM MDT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-1AE41F1CAE45F2B146FD(296700848),Status=Rolled back. [Reason=Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=2,seconds left=120,XAServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(ServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(state=new,assigned=none),xar=null,re-Registered = false),XAServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(ServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(state=rolledback,assigned=OSB_MS1),xar=WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_11603460297,re-Registered = false),XAServerResourceInfo[weblogic.jdbc.jta.DataSource]=(ServerResourceInfo[weblogic.jdbc.jta.DataSource]=(state=ended,assigned=none),xar=CMSDS,re-Registered = false),SCInfo[OSB_PRDKS_DOMAIN+OSB_MS1]=(state=rolledback),SCInfo[SOA_PRDKS_DOMAIN+SOA_MS2]=(state=pre-prepared),properties=({}),local properties=({weblogic.jdbc.jta.CMSDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=OSB_MS1+soaprd-vip-osb-ms1.cos.is.keysight.com:8001+OSB_PRDKS_DOMAIN+t3+, XAResources={eis/wls/Queue, WEDB_EVEREST_OSB_PRDKS_DOMAIN, XREFDS_OSB_PRDKS_DOMAIN, eis/activemq/Queue, CustomSchemaDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS1_OSB_PRDKS_DOMAIN, eis/tibjmsDirect/Queue, eis/jbossmq/Queue, eis/Apps/Apps, MobileApps_AOS_MDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_DRDS_OSB_PRDKS_DOMAIN, WSATGatewayRM_OSB_MS1_OSB_PRDKS_DOMAIN, eis/webspheremq/Queue, eis/AQ/aqSample, SBLPROD_OSB_PRDKS_DOMAIN, wlsbjmsrpDataSource_OSB_PRDKS_DOMAIN, eis/aqjms/Queue, CMSDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_WseeFileStore_auto_1, FAP_OSB_PRDKS_DOMAIN, eis/sunmq/Queue, eis/pramati/Queue, FMWAPPDS_OSB_PRDKS_DOMAIN, weblogic.jdbc.jta.DataSource, GSDC_OSB_PRDKS_DOMAIN, eis/tibjms/Topic, eis/fioranomq/Topic, WLStore_OSB_PRDKS_DOMAIN_FileStore_MS1, PresidioOracleAppsDS_OSB_PRDKS_DOMAIN, GSDCDS_OSB_PRDKS_DOMAIN, eis/aqjms/Topic, CustOutDS_OSB_PRDKS_DOMAIN, OFMW/Logging/BAM, MobileAppsDS_OSB_PRDKS_DOMAIN, FIDDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN__WLS_OSB_MS1, HRMSDS_OSB_PRDKS_DOMAIN, WEDB_OSB_PRDKS_DOMAIN, OracleAppsDS_OSB_PRDKS_DOMAIN, eis/wls/Topic, eis/tibjms/Queue, eis/tibjmsDirect/Topic, IntrastatDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_COSDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS2_OSB_PRDKS_DOMAIN, EVEREST_WEDB_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1, Everest_OSB_PRDKS_DOMAIN},NonXAResources={})],CoordinatorURL=SOA_MS2+soaprd-vip-soa-ms2.cos.is.keysight.com:8002+SOA_PRDKS_DOMAIN+t3+): javax.transaction.SystemException: Lost connection to server while commit was in progress, ignoring because initiating server is not coordinating server. Remote Exception received=weblogic.rjvm.PeerGoneException: ; nested exception is:
java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
java.io.InvalidClassException: oracle.jdbc.xa.OracleXAException; local class incompatible: stream classdesc serialVersionUID = -2542408691177300269, local class serialVersionUID = -4551795881821760665
at weblogic.transaction.internal.TransactionImpl.commit(TransactionImpl.java:376)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:237)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:224)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:552)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:423)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:325)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)Hi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay -
hi i have a doubt....
in fbl1n transaction, there are open items and cleared items.
in it the cleared items for certain document types such as invoice etc is not present in the open item table (bsik)
however the cleared items for document types such as general voucher its present in the open items table (bsik)
is this possible as all cleared item entries shld b present in the open item table with an indicator set for cleared or not...
plz exlain!Hi
There are 2 tables(open and Closed Items) in FI for Account Payables and Account Receivables and GL accounts
1.Account payables: BSIK is Open Items and BSAK is Closed items
2.Account Receivables; BSID and BSAD for OPEN and closed items
3/GL accounts : BSIS and BSAS for Open and Closed Items
<b>Reward points for useful Answers</b>
Regards
Anji
Maybe you are looking for
-
How do I convert PDF to Word in Croatia?
how to active convert pdf files to word files.. im from croatia and i not go to word file but not that it is countrey sorry for my bad speek eanglish =)))
-
IPad's charging/syncing ICON with new cable.
I just bought a replacement charging/sync cable for my iPad. Now the symbol quickly goes from the lightning ICON to the plug ICON. When I plug it into my iMac, the iPad doesn't read "Not Charging" anymore but again goes from the lightning ICON to t
-
Hide the "Vendors by Old Account Number" search tab??
For some vendors we have, the previous account numbers are in fact real social security numbers (SSNs) from our prior system. Unfortunately they can be seen using the "Vendors by Old Account Number" search tab when pulled up on any containing the Ven
-
Concurrent employment in SRM 4.0 with HR integration
Hello all, SRM 4.0, HR 4.7 Just wandering about procedure how to solve concurrent employment (one user on several positions) in SRM 4.0 where this is not possible. Note 850328 is active and even in HR exist user on several position, SRM is taking onl
-
Where to buy new pads???
One of the bottom case foot pads have fallen off of my mid 2010 MBP (13"). Is there anywhere I can get one or a pack of them?