Configuring iWay Siebel Sender/Receiver adapter in SAP XI.

Hi,
I am evaluating iWay Siebel Adapter for connection between Siebel system and SAP system. I am using both the sender and receiver iWay adapter for both inbound and outbound scenario.
In both the case the transport protocol used is HTTP. I searched a lot but could not find a document which explains the different parameter in the Communication channel for both sender and receiver adapter.
Please let me know if you have some document regarding the same. Also in my present scenario I don't have access to Siebel system so I am using a HTTP client to simulate a Siebel system.
I want to know what should I use in the Listener port in the Sender CC and how to send message using this port from a Local HTTP Client.
Regards,
Nilesh

Hi Nilesh,
Check this link on the service marketplace for more information on available 3rd Party Adapters for XI:
https://websmp104.sap-ag.de/~sapidb/011000358700008673832004E/index.htm
http://eai.ittoolbox.com/groups/vendor-selection/eai-select/adapters-to-integrate-sap-xi-and-siebel-639308#
Please see the below threads
iWAY
IWAY Adapter(siebel): Error while using Applicaiton Explorer
XI to mainframe adapter
B2B Adapters
step by step procedure to configure a BAAN adapter
In this thread I have given the connection parameters to connect Siebel using HTTP reciever adapter...
Query String
Siebel - http://www-128.ibm.com/developerworks/rational/library/05/419_siebel/index.html
/people/siva.maranani/blog/2005/09/15/push-data-to-mvc-architectured-application-using-xi
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
See the below links
Integration with Peoplesoft, Oracle and Siebel
/thread/93179 [original link is broken]
XI integration with PSFT/Seibel ?
SAP Siebel Integration
Sap-Siebel integration
XI-Seibel integration using webservices
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--i
part -II /people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--ii
part -III /people/yomeshp.sharma/blog/2006/05/31/integrating-jdedwards-system-with-xi-using-iway-adapter-part--iii
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e2aeb02c-0601-0010-d680-c9be61ffa390
/thread/96443 [original link is broken]
inetgartion of Ep-XI-seibel project
/people/sriram.vasudevan3/blog/2005/03/18/points-to-ponder-over-while-considering-webservices-implementations-vis-a-vis-eai
Regards,
Vinod.

Similar Messages

SSL / X.509 In SOAP Sender/Receiver Adapter

Hi Friends,
We have few third party Java based systems which need to integrate with SAP PI7.1
For this we are using
SOAP Sender from Third PartyTo PI
SOAP Receiver From Pi To Third Party Systems
The Customer Wants to implement SSL.X>509 certificates for encryption and decryption. as one of the option.
we are Facing few issues like.
   I am assuming each of the source system webservice calls will have
to use a username/password to authenticate with the PI system
a.       Will this use 'basic authentication', ie., credentials sent over as
part of the HTTP header field ?
   i.
Assuming we use SSL for transport level security - this is still not secure as the credentials are not encrypted
ii.      Is there a way to send in encrypted credentials and for the PI layer to decrypt the same, validate and process the request ?
b.      Should we consider using a single sign-on mechanism ?
c         Should we consider using X.509 digital certificates ?
      i.      This would require that the X.509 certs are maintained in the Source & PI webserver Java key stores
d.      Should we also consider digitally signing the payload ?
     i.      This requires using an appropriate hashing algorithm such as SHA-1 or MD5
SOAP Sender /receievr Adapter has few properties not specific to them.How to Acheive this.
Regards
Chandra Dasari

Hi Chandra,
You may try to implement this using the AXIS framework of the SOAP adapter. This provides functionality for handling of X.509 encryption and decryption.
You can generate/get the digital certificate and use it for both transport level as well as message level security. You would not require any additional encoding apart from this.
Coming to your queries:
Q - I am assuming each of the source system web service calls will have to use a username/password to authenticate with the PI system
A - If you are using a certificate, then they can call XI using this certificate. You can share your public certificate with each of the parties.
Q. Will this use 'basic authentication', ie., credentials sent over as part of the HTTP header field?
A - Depends...if you are using basic authentication, then it will not be via X.509. It will be the normal process. These two are two different things.
Q. Assuming we use SSL for transport level security - this is still not secure as the credentials are not encrypted
A - This problem is resolved if you are using digital certificates.
Q. Is there a way to send in encrypted credentials and for the PI layer to decrypt the same, validate and process the request?
A - Yes. It is possible. But then you will have to implement encryption decryption logic at both the ends separately if you are not using certificates.
Q. Should we consider using a single sign-on mechanism?
A - Is your third party part of your landscape? if not then you might want to check and confirm this approach with your security adviser.
Q Should we consider using X.509 digital certificates?
A - Yes...This would resolve most of your problems.
Q. This would require that the X.509 certs are maintained in the Source & PI web server Java key stores
A - Yes.
Q. Should we also consider digitally signing the payload?
A - If you require message level encryption along with transport layer.
Q. This requires using an appropriate hashing algorithm such as SHA-1 or MD5. SOAP Sender /receiver Adapter has few properties not specific to them.How to achieve this.
A - You can provide this option while generating the certificate itself.
Please let me know if this helps.
Cheers,
Sarath.

JDBC Sender/Receiver Adapter Configuration with key fields in SAP XI

Hi All,
Good evening.
Please let me know, what are the settings required for key fields when configuring both sender and receiver Adapter?
In My IDOC-XI-File Scenario, when i am sending an IDOC from R/3, I got Mapping Runtime exception error? So, How to send the same IDOC after correcting the error?
Thanks to all in advance.
Regards,
Nagarjuna.

HI Nagarjuna,
If my understanding is correct, When you trigger the Idoc from R/3 it thrown the error in XI.
If you want to send the same Idoc then go to WE19 in R/3 system enter the same Idoc number and execute the scenaio. It send the Idoc to XI system, but the message number will change.
Regards
Goli Sridhar

Configuring a Seeburger FTP Receiver Adapter

Hello,
I am trying to build a scenario where SAP ECC 6 sends an invoice to a customer via EDI.
We are using ECC 6.0 and PI 7.0 and the Generic Seeburger EDI Adapters. The VAN is a GEIS EDISWITCH VAN (Eircom in Ireland).
I am able to successfully send an IDoc from ECC 6 and into PI where a Seeburger map converts the message to EDI-XML format. I can use a file adapter to create a file in normal EDI format. But I can't get the Seeburger FTP adapter to work with the VAN.
I have configured the correct IP, port, username and password but I keep getting the following message when the communication channel tries to send the message:
<h6>Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: >> Description: com.seeburger.jftp.app.exception.FtpExceptionSoftProcessingError: Unexpected reply: 501-Syntax errors in parameter. usage: %[recipient id]%[APRF] where either [recipient] or [APRF] can be omitted. (to change your current default SEND relationship). %% (places you in your 'HOME' TR). &['s'|'single'] ('get' command gets single file). &['m'|'multiple'] ('get' command gets multiple files). >> </h6>
The FTP session is expecting a PUT command with the recipient id and APRF as parameters but these are not getting passed. I suspect this is because I am not passing the correct variables to the receiver adapter but I don't know what variables it expects and where they should be specified. And I can't find the answers in the documentation.
Can anyone shed some light on what I need to do?
Thanks,
Ben

Hi Prateek,
Thanks for your comments. The channel is set to GEIS(GeMarkIII). There is nowhere to specify a directory or filename. The settings I have used are as follows:
Adapter Type: FTP (http://seeburger.com/xi)
Receiver
Transport Protocol: FTP
Message Protocol: GEIS/GeMarkIII
Adapter Engine: Integration Server
Host name: <IP address of VAN server>
port: 21
User Id: <Our mailbox number>
Password: <Correct password>
Host path/VAN Partner ID: <blank>
Script file: <blank>
Transfer type: ASCII
Connection mode: Passive
Use keep alive: <Not checked>
Security Mode: None
Proxy Mode: none
Resource ID: <blank>
Deliver transmission report: <not checked>
Payload mode: Attachment
Attachment ID: SeeburgerMain
Channel status: Active
Use dynamic attributes: <Checked>
Use non-empty attributes: <Checked>
Request displayed report: <Not checked>
Request dispatched report: <Not checked>
Report timeout (minutes): 720
Handle received reports: Refer reports to XI system
There is nowhere in the communication channel configuration that allows me to specify the receiver ID or the APRF. The documentation say this is read from the EDI data and the relevant fields are populated.
Any ideas?
Thanks,
Ben

Dynamic configuration required in sender file - Adapter Module

Hi Everybody,
I am developing an Adapter Module in the file adapter (sender) using Adapter Specific Message Attributes.
I am using Dynamic configuration inside the Module Process method in the adapter module.
We are getting an error saying Dynamic Configuration cannot be resolved.
Can anybody tell me the package to be used.
Thanks,
Zabiulla

You can access the dynamic configuration in adapter module like this:
Message msg = (Message) inputModuleData.getPrincipalData();
String fileName = msg.getMessageProperty("http://sap.com/xi/XI/System/File", "FileName");
You do not need any addition library besides the adapter module API.
Hope that helps
Stefan

Sender Mail Adapter with SAP Conversion agent

have some1 used SAP conversion agent on attchment from XI Sender Mail adapter?
it seems to ignore the attchment of the e-mail
the sender configuration module tab is as follows :
1.localejbs/AF_Modules/PayloadSwapBean transform
2.localejbs/sap.com/com.sap.nw.cm.xi/CMTransformBean CM
3.sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail
The paramters are
transform swap.keyName Content-Disposition
transform swap.keyName Content-Description
transform swap.keyValue attachment
transform swap.keyValue codeco
CM TransformationName ZIM_CODECO_VALIDATIONS
The Convesion Agnet runs prefectly when using the Conversion Agent engine
thx,Shai Rosenzweig

check with tis may helpful for you
http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
Regds
Abhishek

Sender IDOC adapter for SAP 3.1H system & XI 7.0

We are on XI 7.0 and XI would receive a IDOC message from SAP 3.1H system.
I need to import IDOC's in imported objects in integration repository but I cannot see any IDOC under the IDOC node. I am able to see the RFC's. Do we need to do extra steps with SAP 3.1H version for IDOC adapter?
Thanks in advance for help!
Mrudula

Ahmad,
This thread is for sender RFC adapter. I am able to see the all the RFC's but not IDOC's from Integration repository for imported objects from SAP 3.1H version.
Thanks!
Mrudula

Data Types for JDBC Sender/Receiver Adapter

HI experts,
I am very much confused how the data types shoudl be for the Sender/receiver for JDBC.
And is there any standard format where it should be used, or what is the strucutre to be used,.
Please let me know in clear and help me out in this regard,
Edited by: Amruth on Dec 4, 2008 6:11 AM

HI Nagarjuna,
If my understanding is correct, When you trigger the Idoc from R/3 it thrown the error in XI.
If you want to send the same Idoc then go to WE19 in R/3 system enter the same Idoc number and execute the scenaio. It send the Idoc to XI system, but the message number will change.
Regards
Goli Sridhar

Error when configuring Sender File Adapter (XI 7.0)

Hi all,
After i had configured my Sender File Adapter of Communication Channel 'CC_SEND_MATERIAL_FILE', an error message for this Communication Channel (in Runtime WorkBench/Component Monitoring/Adapter Engine/Communication Channel Monitoring) occurred as below:
Error: com.sap.aii.af.ra.ms.api.DeliveryException: java.net.MalformedURLException: unknown protocol: dest
I think that all configurations for this Sender File Adapter are correct. But i don't know where is protocol "dest" and how can i correct this protocol.
Could anyone please help me to resolve this problem?
Thanks for all in advance,
Vinh Vo

Hi Sarvesh,
Yes, i have configured the source file with the path in the AL11. I think all an other configurations are also OK. But i don't know what is protocol 'dest'.
Anybody can explain and help me, please!
Vinh Vo

Hadeling multiple files in sender and receiver adapter

Hi ,
In my sender FTP server multiple files gets created at a same time i want to send this same files to the target FTP server am not doing any file content conversion. Just pick this multiple files at a single poll and drop it in the target FTP system.
I gave . in the as file name parameter in the sender file adapter..PI system picks all the files as separate message but if i give . in the receiver adapter itu2019s not creating the file and its giving Java exception..
Is there any other method to do this without having File content conversion... ?
Regards
Shakfie

I gave *.* in the as file name parameter in the sender file adapter..PI system picks all the files as separate message but if i give *.* in the receiver adapter itu2019s not creating the file and its giving Java exception..
For receiver adapter you have to give some file name, '.' will not work for receiver adapter. So give any temporary name just to satisfy the mandatory field. And when you selet the ASMA settings in both SENDER & RECEIVER adapter then your Receiver File adapter will write the same file name which it has picked up and NOT the one which you have written in your receiver adapter.
Note: Set ASMA setting in both else you will not get the same file name at receiver. You can see the same in blog given by Siva. You need not to create any UDF since you are not using any mapping. Just use the ASMA settings.. that's it.
> Is there any other method to do this without having File content conversion... ?
You can go through this blog for the same...
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
Regards,
Sarvesh

Update sql statement in sender/receiver jdbc adapter

Hi
What is the update sql statement we give in the sender/ receiver adapter when
1) SELECT statement was written in query sql statement
2) EXECUTE statement was written for a stored procedure in query sql statement
thanks
Anitha

> 1) SELECT statement was written in query sql statement
your table should have some value "already_processed" which prevents a second processing of that table.
the update statement sets that value.
> 2) EXECUTE statement was written for a stored procedure in query sql statement
the same as above.
when your stored procedure already does the update, then write a second stored procedure which does nothing.

Sender SMTP Adapter / Content Based Routing / Mapping of an attachement

Hi all,
I'm still working on my SMTP --> PI --> Proxy scenario (asynchronous). I've tried several different properties of my sender communication channel (type = mail), but I didn't find the correct configuration. Hopefully it exists.
I'm working with PI 7.0 SP10.
I get an inbound message via Mail using sender SOAP Adapter. The message payload itself is an attachement. Now I'd like to do the following:
a) Content Based Routing in Receiver Determination based on the message subject
b) Mapping of the Attachement XML message to my inbound proxy interface
Now, trying to do so, I didn't get it work. When I use XIPAYLOAD with keep attachements, I get two attachements in my inbound message (one in XI mail package format having the subject within, one with the IDoc structure I'd like to map). How can I assign the second attachement to be used for my message mapping?
When I use XIALL instead of XIPAYLOAD, I think the mapping will work but my subject for content based routing will be lost, right? That one I didn't get running because of another failure, so I don't know the exact behaviour of the adapter for that configuration.
Anybody out there who know the correct configuration for the sender mail adapter for my small scenario above?
BR
Holger

Hi Stefan,
sorry for misunderstanding, for sure I'm using the mail adapter, not the SOAP Adapter. I'm actually on the same direction. I'm using XIPAYLOAD as message protocoll (having the attachement as the content for the mapping --> correct). Furthermore I've also found the predefined context objects for the content based routing receiver determination.
What I missed was setting the following properties in the communication channel:
To store adapter attributes in the message header of the XI message, set the Set Adapter-Specific Message Attributes indicator.
The following attributes are added to the XI message header if the sender makes them available, and if the Variable Transport Binding indicator is set.
Now it's working
BR
Holger

WS Receiver Adapter Error - Error in WSDL access for task ID

Hi Experts,
Need Help..I am working on (PI 7.1:HP-UX) IDoc to WS Adapter scenario. Message failed in SXMB_Moni...Pasting the Error log. Does this related to any Network Issues? Do I need to do anymore configurations in WS Received Adapter?
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">WS_ADAPTER_SYS_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>System error while calling Web service adapter: Error in WSDL access: 'Error in WSDL access for task ID "00000000000000000021"; read the long text'</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks,
Phani Akella.

Hi,
Ports were opened in the firewall...Now struggling with a different error. Gone through SDN and found Note 1142454 - Error when initializing the SOAP application.
System error while calling Web service adapter: Error when initializing SOAP client application: 'error_text&#39
This did not help...Do we need to do any SOAMANAGER Configuration? Please suggest.
Thanks in Advance,
Phani Akella.

Secure Connection option in MDM adapter in SAP PI 7.4

Hi,
We have an option for selecting secure connection in MDM sender and receiver adapter in SAP PI 7.4.
Can someone tell me what roles are required for the repository user in MDM system for this secure connection? Also, does it require any certificates to be installed in SAP PI system.

hi,
we are also using SAP PI 7.4 dual stack system. there is no any certificates required in SAP PI.
XML Schema detail nto editable
go through this thread ..which is very useful for doing integration with SAP MDM.
Regards,
Krushi.

Can't create a new SOAP receiver adapter

Hi,
I configure a new SOAP receiver adapter in the integration directory and activate the adapter.
When I send trough XI a message to this communication adapter an error occurs in the defaultTrace.trc :
failed to set up the adapter for channel .....;caused by java.lang.NullPointerException
No stacktrace.
I try to set the communication channel inactive and active and also restart the adapter engine but nothing works.
Do someone solve this problem ?
Regards,
Gerald

Hi Gerald,
Check the below and see if anything is missing/wrong
( may not be the exact order as below, but you need to reach the last one 'your adapter')
runtime workbench->component monitoring -> Integration Server -> adapter engine ->adapter monitoring (in status tab)-> Soap -> your adapter.
Do the same for your 'sender adpater' also
This may help to identify whats wrong in your settings
Hope this helps to fix your issue
Regards
Vishnu

Configuring iWay Siebel Sender/Receiver adapter in SAP XI.

Similar Messages

Maybe you are looking for