Creation of Installation base automatically
Hi Friends,
I am exploring the solution for customer installation. With respect to that I want a installation base creation as automatic after customer master creation. The installation base should be equavelent to customer master, All partner data at customer master should copy automatically. In fact client has 8000 customer master. If the customer is removed , deleted then it should impact the Ibase.
Also when ever the sales delevery completed with respect to the equipment(material serial no combination) , the same should go as component under installation base.Also equipment should get all partner detail from the installation base.
If the equipment is removed via sales document then all partner details should be removed.However the usage records hass to be captured like previous partner etc. In addition what is the way to create the measurements points, maintenance plan in equipment.
Regards
Thenna
Hi,
I think your requirment can be met only with CRM services module, However Automatic installed base gets created through maintaining Serial no. profile for Equipment, use "oein" T-code and while making delivery to customer through SD process, when you select the serial no.s just tick mark on the left box in "delvery > Extras>Serial Numbers."
Prior to this process please maintain proper serial no. profilein MM for the material.(Euipment)
regards
DSR
Edited by: D.Srinivasa Rao on Oct 28, 2011 12:36 PM
Similar Messages
-
Creation of excise invoice automatic.
Hi All,
I have an one doubt. i have done setting for creation of excise invoice automatically.
Here is only one excise and series group.
So when i do the domestic sale, excise invoice gets created automatically but when i do the export sale and create the commercial invoice , excise invoice does not create automatically.
Is it happening because we are using same excise and series group or some thing else?
Note- If i remove the automatic setting and create the excise invoice seperately in both scenario, it is getting create.
JalajHi
There is some basic requirements to create the automatic Excise Invoice like :-
A) Specify the CENVAT account which should be posted on creation of excise document.
B) Under which Excise Group and Series Group the Excise Invoice should be created.
In your case to create automatic Excise Invoice you need to maintain separate Excise Group and Series Group, as for Export we also need to maintain separate no. range (not necessarily) and normally we also have different Billing Type.
So do the separate setting and then try to create automatic Excise Invoice.
Regards
Amitesh -
When trying up date adobe flash player from 10.1.102.64 to new version 10.2.152.26 i get an error message, "Installer will automatically continue when those conflicting applications are closed: [circle w/line through it] Mozilla firefox."
Save the Flash installer to the desktop and close Firefox via File > Exit Firefox.<br />
Start the Flash installer via a double-click on the Flash installer icon on the desktop.
If that still gives problems then see:
* http://kb.mozillazine.org/Kill_application -
-ITS A NEW COMPUTER
-FIRST TIME INSTALLATION
-FLASH ALREADY INSTALLED ON MS EXPLORER V 9
-WEB PAGES REQUEST TO INSTALL FLASH WHEN SURFING WITH MOZILLA
THE INSTALLER WILL AUTOMATICALLY CONTINUE WHEN THESE CONFLICTING APPLICATION ARE CLOSED : MOZILLA FIREFOXSave the Flash installer to the desktop and close Firefox via File > Exit Firefox.<br />
Start the Flash installer via a double-click on the Flash installer icon on the desktop.
If that still gives problems then see:
* http://kb.mozillazine.org/Kill_application -
Hi All
I am working on IBase scenario for my client, I am new to the IBase scenario. Here we are creating installation base for two to five levels of product.
Once we create IBase for lower level then this IBase is inserted in upper level IBase. Like this we assign all levels based on product.In some cases we need to unassign any of IBase from its upper level IBase. When it is unassigned we are not able to display the IBase which unassigned. When it is unassigned from upper level how come system not able to display this IBase. If we speak functionally the part (IBase) which is unassigned should be valid to assign in any other upper level IBase in feature.
The error I am getting for above is
Serial number XXXXXXX for material XXXXXXX does not exist in any IBase
Message no. IQ122
Diagnosis
Serial number BMF3000106 for material S24-D5022-C100-6 does not exist in any installed base on 31.03.2015 at 10:22:09.
System Response
The system cancels processing.
Hi experts please suggest.
Regards
KesavaHello Kesava
Can you please explain in detail what exactly you are trying to do while assigning and unassigning Ibase.
Regards
Naresh -
Automatic creation of data base table and RFC through Programming
Hi All ,
I have an urgent requirement in which i will be given a Table design(Having parameter names and its type length etc) in xml format or in excel sheet , then by using that as an input i have to create it in Backend automatically through my coding. Can anyone tell me that how this can be done.
Another requirement like upper one is that if i have to automatically generate code for a Function Module on the basis of its signature given . then how this can be done.
Thanks & Regards,
Abhishek Bajpai
mailid --> [email protected]
Edited by: ABHISHEK BAJPAI on Dec 21, 2007 8:10 AMHello Abhishek
Have a look at thread: [DYNAMIC DDIC TABLE|DYNAMIC DDIC TABLE;
The function module you are looking for is FUNCTION_STUB_GENERATE.
Regards,
Uwe -
Automatic creation of installed base?
Dear all,
We are using CRM 5.0
We are creating BOM for material in R3.
Line :10 --> Header level item
Line : 20 --> Parent item 1
Line : 30 --> Parent item 2.
Now as per standard When we are doing the delivery of any item in R3, A Installed base is created in CRM (Based on Delivery).
But we are using BOM so line item 20 and 30 is attached to header item 10.
and when we are creating delivery, three different installed base are creating.
Actually i want One Installed base of item 10 and Attached item 20 & 30 becomes a component
How can i do?
Pls reply. I will reward the points
Regards
JayeshHi Jayesh,
Use any of the following FM:
IB_COM1_CHANGE_IBASE_ONLY
IB_COM2_CHANGE_IBASE_ONLY
IB_COM2_CREATE_IBASE
IB_COM_CREATE_IBASE_INITIAL
Best Regards,
Pratik Patel
<b>Reward with Points!</b> -
Creation of purchase order automatically by taking purchase requesition
Hello Gurus
Is it possible to create purchase order automatically by taking purchase requesition no from sales order?
i checked in all the forms couldn't find any answer .
thank you in advance
regards
venkatHi Venkat,
When you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
Purchase orders are created from purchase requisitions in the usual way. But If you want the Purchase orders to be created automatically, then you should automate the creation of purchase order by creating a job or using workflow. Other wise to create a PO from PR use ME57. A third-party order is usually created referencing a third-party item in a purchase requisition. You can create purchase orders in this way individually or collectively. For Configuring Automatic PO kINDLY PLEASE LOOK into this.
"http://help.sap.com/saphelp_47x200/helpdata/en/94/da2e3b2bdab96be10000000a114084/frameset.htm"
Kindly please let me know If you need any more information on this.
Regards,
Ram Pedarla -
Creation of cost elements automatically
Hi,
When I selected "manual creation of cost elements" in OB13, Then we can create a group of cost elements in OKB2 followed by OKB3 and SM35.
Even I need to do same thing I when I select " automatic creation of cost elements" ??
I tried selecting " automatic creation of cost elements". and I checked in KA03 whether it had created any cost element automatically. but it didnt created any thing...
Please suggest..Dear Santosh Dharana,
Good Question. i can clarify you. this question
1. when you select in ob13 create cost elements manually
when your are using in obk2 we have to maintain here Acc from no. to Acc to no. ranges for Gl's and cost element categeory.
after we can run batch in put in obk3 & SM 35 it's updated successfully.
Note: After execute, *when you are try create another GL account with cost element we have to give cost element categeory by manually.
2.when you select in ob13 create cost elementsAutomatically
when your are using in obk2 we have to maintain here Acc from no. to Acc to no. ranges for Gl's and cost element categeory.
after we can run batch in put in obk3 & SM 35 it's updated successfully.
Note: After execute, when you are try create another GL account with cost element we don't have to give any cost element categeory here system automatically give .
Please try it. i worked for this one
Thanks & Regards
shankar -
Hi everybody,
Do you know any bapi / F.M. for the creation of an istall base, with one equipment and several materials?
Thank you
AndreaHi everybody,
Do you know any bapi / F.M. for the creation of an istall base, with one equipment and several materials?
Thank you
Andrea -
Repository Creation Assistant installation problem
I am following the steps in http://download.oracle.com/docs/cd/E14571_01/install.1111/e12002/sso_das002.htm to install Oracle SSO for OID 11g. In step 3, it require to use RepCA (repository creation assistant) to load SSO so I go ahead to install RepCA but it got a linkage error during the installation. I check the install log and it indicate a missing shrept.lst file. Where does the file come from?
Start output from spawned process:
+/u01/app/oracle/product/10.1.4.3.1/RepCA/bin/genclntsh+
genclntsh: Could not locate /u01/app/oracle/product/10.1.4.3.1/RepCA/ldap/admin/shrept.lst
genclntsh: exiting ...
+make: *** [client_sharedlib] Error 1+
End output from spawned process.
Many thanks
Edited by: user3637555 on Jan 6, 2011 10:50 AMI am following the steps in http://download.oracle.com/docs/cd/E14571_01/install.1111/e12002/sso_das002.htm to install Oracle SSO for OID 11g. In step 3, it require to use RepCA (repository creation assistant) to load SSO so I go ahead to install RepCA but it got a linkage error during the installation. I check the install log and it indicate a missing shrept.lst file. Where does the file come from?
Start output from spawned process:
+/u01/app/oracle/product/10.1.4.3.1/RepCA/bin/genclntsh+
genclntsh: Could not locate /u01/app/oracle/product/10.1.4.3.1/RepCA/ldap/admin/shrept.lst
genclntsh: exiting ...
+make: *** [client_sharedlib] Error 1+
End output from spawned process.
Many thanks
Edited by: user3637555 on Jan 6, 2011 10:50 AM -
OTR CREATION IN BATCH MODE / AUTOMATIC "CIF" CUSTOMER IMMEDIATELY AFTER CREATION IN ECC
Dear All,
My scenario is: We have a Web dynpro customized screen for Customer Creation and Sales Order creation in SAP ECC. This screen first send data to CRM where Customer is created and Customer code is flowing back to my screen immediately. Using this Customer Code, Sales order is created from the same screen using standard BAPI.
Now as per standard behavior, data will be sent to TM immediately after sales order creation for OTR creation, where it will fail as customer created was not CIFed to TM. So as per my understanding, my issue can be resolved by any of the following ways:
Option 1) Automatic CIF customer at the time of Customer Creation: By this if customer will automatically CIFed to TM immediately after the customer is created in ECC through CRM, then there will be no issue even in creating OTR immediately after Sales order creation.
OR
Option 2) Creating OTR in batch mode instead of immediately after Sales Order Creation: By this I can first CIF Customer to TM in Batch JOB and then subsequently OTR will be created in Batch Job.
Please suggest more feasible option out of two options mentioned above and also how to achieve the same?
Regards,
Vibhu GuptaHi Vikas,
1. Could you please show me one of your FU stages info if allowed and show me what you did to achieve step 4 and 5 in the frontend? I want to check in our internal system and see whether this can be achieved from standard point.
2. How did you achieve the automatic FO creation when building FU? Because when I create a FU, there is no FO created automaticaly.
Thanks & Best Regards,
Dawson -
Creation d'une base de données
Bonjour,
Dans le cadre de mon projet qui est un banc de test, je souhaiterais créer une base de données danslaquelle je peux stoker les différents références des produits que je vais tester et leurs associer les tests correspondants. Cela peut paraitre simple à certain mais je ne sais pas comment m'y prendre puisque je suis débutante. merci de me mettre sur le bon chemin.
merci d'avancemerci pour votre réponse
en fait j'ai fait recourt à Database Connectivity Toolkit, j'ai fait une petite recherche et mon premier essai était ci-joint. il consiste en la creation d'an tableau dans access qui va contenir tous les données et qu'il doit fonctionner normalement. mais c'était pas le cas chaque fois, lors de la simulation, une erreur se produit
Attachments:
applicationForm.vi 14 KB -
HIS 2013 installer "set automatic log on" not working
Hello,
This was my first attempt at using this feature however when the server rebooted during the install, it did not automatically log back on (with my own credentials). Is there something else that needs to be in place for this to work?
Thanks, Jim.Hello,
This can be a bug in the HIS 2013 Installer. I recommend you to do the restart (autologin) manually like this :
You will need to have an account with a password for this to work.
Run regedit.exe
Navigate to
HKLM\Software\Microsoft\Windows NT\CurrentVersion\winlogon
Set or create the following keys
AutoAdminLogon = "1"
DefaultUserName = Your user name
DefaultPassword = Your password
Restart and let us know if it works!
Hope this helps you :-)
Best Regards,
Steve Melan - BCEE My Blog : http://stevemelan.wordpress.com -
What was the last version of CS to include webpage creation as part of Automate?
The header says it all: What was the last version of CS to include the creation of web pages as part of Automate in the File dropdown?? I've tried to re-install the original CS on a separate machine, which fails, since it does not make nice with my current version, and the Adobe folks are ABOLUTELY NO HELP since it's too old!
Suggestions welcome.
Brian McNeillThe only thing i can think is your either referring to Automate>Web Photo Gallery or perhaps ImageReady.
As far as windows goes many people have photoshop cs running on windows 7.
Maybe you are looking for
-
My mouse keeps picking up web tabs and I don't want it do that or open them in other windows.
-
Unable to connect to the 10g Express edition database in oracle forms
hi, i have installed Oracle Database 10g Express Edition and oracle 10g developer suite. i need to work on oracle forms by connecting to the database of the 10g express edition but unable to do so as i am not aware of the database name or SID. can an
-
SOD Library in AACG 8.6
Hi All, Is the best-practice SOD Library pre-loaded during installation of AACG 8.6? The xml files in /contents directory contains all laguages except english. Can someone please guide me through the navigation? Thanks in advance :-)
-
How do I play flv videos on iOS?
I use netconnect and netstream in my actionscript 3 flash player for desktop FLV video playback. But now I would like to add support for Apple iPad. I recently upgraded to Flash Developer Pro CS6 as part of my master suite upgrade. I was hoping for
-
How Do I Create a Specific Type of Transformer?
Good morning, all! I am brand new to the Circuit Design Suite so I'd greatly appreciate any responses being "dumbed-down" for me. I am attempting to build in Multisim the same schematic pictured at the link below and in the attachment here. The probl