Crystal Reports 8.5 and Vista

Post Author: Mark1110
CA Forum: General
Hi, I have an existing VB6 application that is using CR 8.5. Our company will be upgrading the operating system to Vista. My question is, will CR 8.5 work under the Vista operating system or will I need to move to the latest version of Crystal Reports. Mark

Post Author: amr_foci
CA Forum: General
even you moved to the latest version,, i dont think business objects support ur product on Vista yet,, please check

Similar Messages

Deploy Visual Basic 6.0 RDC application using Crystal Reports 9 on Windows Vista

Post Author: albe
CA Forum: General
When attempting to deploy a Visual Basic 6.0 Report Designer Component (RDC) application using Crystal Reports 9 on Windows Vista systems, the application fails after the first print or preview (that show normally) and an error occurred: -2147417848 Method '' of object '' failed.
The app use the RDC and Active Data; I verify that the problem is encountered when the app calls the 'SetDataSource' method.
I tried everything that came in my mind: reinstalling it a few times, with administrator priviledges, disabling uac, manually registering dlls, ...
I hope that this will be fixed, since Crystal Report 9 is the last CR version compatible with windows 98.
thanks in advance,
Alberto

Hello,
This forum is for community use and is not considered a support site. For assistance you need to purchase a case from our support site. But 9 is no longer a supported version so this is your only place to get assistance.
Try downloading the only patches available from:
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90actxwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90dbexwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90devwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90mainwin_en.zip
Thank you
Don

Crystal Report XI crashes on Vista

We recently installed Crystal Report XI on a Vista (32 bit).
The app opens fine and can view/run reports.
But, when we attempt to modify crystal report(s) the app will grey out and an OS message will appear: "Crystal Reports has stopped working".
This does not happen on our CRXI & XP installations, so I was wondering if CRXI is Vista compatible?
If so, was there any extra installations needed?
thanks
Tony

Hi Tony,
Try with this:
Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
bcdedit.exe /set nx AlwaysOff
Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
bcdedit.exe /set nx AlwaysOn
Its a known issue with vista operating system and this is workaround for it.
Hope that helps!!
Regards,
Shweta

If image file not exist in image path crystal report not open and give me exception error problem

Hi guys my code below show pictures for all employees
code is working but i have proplem
if image not exist in path
crystal report not open and give me exception error image file not exist in path
although the employee no found in database but if image not exist in path when loop crystal report will not open
how to ignore image files not exist in path and open report this is actually what i need
my code below as following
DataTable dt = new DataTable();
string connString = "data source=192.168.1.105; initial catalog=hrdata;uid=sa; password=1234";
using (SqlConnection con = new SqlConnection(connString))
con.Open();
SqlCommand cmd = new SqlCommand("ViewEmployeeNoRall", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
da.Fill(dt);
foreach (DataRow dr in dt.Rows)
FileStream fs = null;
fs = new FileStream("\\\\192.168.1.105\\Personal Pictures\\" + dr[0] + ".jpg", FileMode.Open);
BinaryReader br = new BinaryReader(fs);
byte[] imgbyte = new byte[fs.Length + 1];
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dr["Image"] = imgbyte;
fs.Dispose();
ReportDocument objRpt = new Reports.CrystalReportData2();
objRpt.SetDataSource(dt);
crystalReportViewer1.ReportSource = objRpt;
crystalReportViewer1.Refresh();
and exception error as below

First: I created a New Column ("Image") in a datatable of the dataset and change the DataType to System.Byte()
Second : Drag And drop this image Filed Where I want.
private void LoadReport()
frmCheckWeigher rpt = new frmCheckWeigher();
CryRe_DailyBatch report = new CryRe_DailyBatch();
DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter ta = new CheckWeigherReportViewer.DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter();
DataSet1.DataTable_DailyBatch1DataTable table = ta.GetData(clsLogs.strStartDate_rpt, clsLogs.strBatchno_Rpt, clsLogs.cmdeviceid); // Data from Database
DataTable dt = GetImageRow(table, "Footer.Jpg");
report.SetDataSource(dt);
crv1.ReportSource = report;
crv1.Refresh();
By this Function I merge My Image data into dataTable
private DataTable GetImageRow(DataTable dt, string ImageName)
try
FileStream fs;
BinaryReader br;
if (File.Exists(AppDomain.CurrentDomain.BaseDirectory + ImageName))
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
else
// if photo does not exist show the nophoto.jpg file
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
// initialise the binary reader from file streamobject
br = new BinaryReader(fs);
// define the byte array of filelength
byte[] imgbyte = new byte[fs.Length + 1];
// read the bytes from the binary reader
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dt.Rows[0]["Image"] = imgbyte;
br.Close();
// close the binary reader
fs.Close();
// close the file stream
catch (Exception ex)
// error handling
MessageBox.Show("Missing " + ImageName + "or nophoto.jpg in application folder");
return dt;
// Return Datatable After Image Row Insertion
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

Crystal Report 2008 SP3 and BO XI 3.1 conflict

Hi every body,
We have a BOE system:
BO XI 3.1
Oracle db 10g
All running successful and can create some types of WebI report.
But we also want reports with Crystal Report.
1> So we install Crystal Report 2008 SP3 (without knowing the conflict error between BO XI 3.1 and Crystal Report 2008 SP3 and overwrite some .dll file). After installing, we can not create WebI report any more. And a error message box display: "DBDriver failed to load: C:\Program File\Business Objects\BusinessObjects ENterprise12.0\win32_x86\dataAccess\connectionServer\dbd_oci.dll ".
2> We uninstall Crystal Report SP3. But this is not the solution. Still error because of missing .dll files.
3> We open BO XI 3.1 setup and repair BO XI 3.1. Even we uninstall BO XI 3.1, delete all of its components and delete in regedit key. We install BO XI 3.1 again. Now we have full .dll file, not missing them any more. But when we open universe and click on Table browser, cannot fetching any tables.
We set rights for Oracle DB user again. But still error: cannot fetching.
4> We searched the solution for this problem on the internet. But not worked, no answer.
Can somebody help me bring back the BOE system state again ? pls :"<
T______T

Hi Paul,
I hope I read your question right!
Yes, It is possible to run XIR2 and 3.1 on the same server although it's not recommended by BO. You will need to make sure they are both pointing to different CMS databases and different FRS repositories, like you already mentioned you will need to specify different ports for the CMS db and Tomcat.
Why not uninstall Business Objects XI R2 in your BO development environment or a spare server (if you have one), and do a clean install of XI 3.1 SP3.
Tip: If you were already having performance issues with your XI R2 environment, I would seriously consider upgrading the hardware. XI 3.1 needs a bit more RAM and CPU than XI R2
Regards
Rim Geurts

Performace Issue using Crystal Report For enterprise and BEx Queries

Hi all;
    We are generating the following error stack when trying to build a report on top of a BEX query using Crystal Report for Enterprise :
    |7C4F8ECE44034DB897AD88D6F98B028B3|2011 12 12 17:24:21.277|+0100|>>|E| |crj|20380| 56|ModalContext    | |2|0|0|0|BIPSDK.InfoStore:query|CHVXRIL0047:20380:56.174:1|-|-|BIPSDK.InfoStore:query|CHVXRIL0047:20380:56.174:1|Cut2PbOe3UdzgckPBHn8spEab|||||||||com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects||Assertion failed: Java plugin for CommonConnection is not loaded.
java.lang.AssertionError
     at com.businessobjects.foundation.logging.log4j.Log4jLogger.assertTrue(Log4jLogger.java:52)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.newInfoObject(InfoObjects.java:576)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpackHelper(InfoObjects.java:548)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpack(InfoObjects.java:489)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.startUnpack(InfoObjects.java:464)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore$XRL3WireStrategy.startUnpackTo(InternalInfoStore.java:1484)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore$XRL3WireStrategy.startUnpackTo(InternalInfoStore.java:1464)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.unpackAll(InternalInfoStore.java:910)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:944)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:929)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query_aroundBody24(InternalInfoStore.java:798)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query(InternalInfoStore.java:1)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query_aroundBody20(InfoStore.java:175)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query_aroundBody21$advice(InfoStore.java:42)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query(InfoStore.java:1)
     at com.businessobjects.mds.securedconnection.cms.services.olap.OlapCmsSecuredConnectionService.getConnectionObject(OlapCmsSecuredConnectionService.java:125)
     at com.businessobjects.mds.securedconnection.cms.services.olap.OlapCmsSecuredConnectionService.getOlapSecuredConnection(OlapCmsSecuredConnectionService.java:191)
     at com.businessobjects.mds.securedconnection.loader.internal.SecuredConnectionLoaderImpl.getOlapConnectionFromSecuredConnection(SecuredConnectionLoaderImpl.java:83)
     at com.businessobjects.mds.securedconnection.loader.internal.SecuredConnectionLoaderImpl.getConnectionFromSecuredConnection(SecuredConnectionLoaderImpl.java:60)
     at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.loadSecuredConnection(DirectOlapAccessDataProviderBuilder.java:193)
     at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.loadSecuredConnection(DirectOlapAccessDataProviderBuilder.java:176)
     at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.provideUniverseFromCms(DirectOlapAccessDataProviderBuilder.java:63)
     at com.businessobjects.dsl.services.datasource.impl.AbstractUniverseProvider.provideUniverse(AbstractUniverseProvider.java:41)
     at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.updateQuerySpecDataProvider(AbstractDataProviderBuilder.java:119)
     at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.updateDataProvider(AbstractDataProviderBuilder.java:106)
     at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.addDataProvider(AbstractDataProviderBuilder.java:49)
     at com.businessobjects.dsl.services.workspace.impl.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:56)
     at com.businessobjects.dsl.services.workspace.impl.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:45)
     at com.crystaldecisions.reports.dsl.shared.DSLTransientUniverseServiceProvider.createSessionServicesHelper(DSLTransientUniverseServiceProvider.java:72)
     at com.crystaldecisions.reports.dsl.shared.DSLServiceProvider.createSessionServices(DSLServiceProvider.java:428)
     at com.businessobjects.crystalreports.designer.qpintegration.DSLUtilities.getServiceProvider(DSLUtilities.java:279)
     at com.businessobjects.crystalreports.designer.qpintegration.InitializeDSLRunnable.run(InitializeDSLRunnable.java:82)
     at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:121)
Here seems to be that a plugin is not loaded : com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects||Assertion failed: Java plugin for CommonConnection is not loaded.
could this affect the performance of Crystal Reports for Enterprise and how could I fix this ?
Best Regards
Anis

Venkat,
Thanks for your response. Please note, however, the transaction RAD1 does not exist. Let me provide more details about the current settings of the InfoObject.
The Characteristic is 'Item' (0CS_ITEM) and upon going to RSA1 > Modeling > InfoObjects > Item (0CS_ITEM) > Right Click > Display > Business Explorer (tab) > Text Type is set to 'Long Text' and BEx description is set to 'Long description' already.
When I run/execute the query with this Item characteristic, the results in BEx Analyzer is showing appropriate long text, however, Crystal Report for Enterprise shows short text only
K
Edited by: Kumar Pathak on Feb 3, 2012 6:18 PM

Crystal Reports Server 2011 and BW 7 as a data source for uploaded reports.

Hello,
I am hoping someone can provide me with a clear answer for this.
Lets assume..
1. We are running crystal reports server 2011 and BW 7
2. We want to publish a report in the BI Launch pad so users can view it
3. Can we create a crystal report in the report designer with the data source as BW 7 then upload it to the reports server and have it run on-demand and Run over night?
Can anyone shed some light in this area?
kind regards
david

Hi,
Crystal Reports Server is not supporting the SAP Integration Kit. You will need BusinessObjects Edge or BusinessObjects Enterprise
regards
Ingo Hilgefort

Crystal report 8.5 and 11 compatibility with Office 2007

Hi, we are currently running Crystal report 8.5 and 11.
We are projecting to migrate to version 2007 of Office.
Is Crystal report 8.5 and 11 has been tested with office 2007?
Regards,

Hi Eric,
You can download [Platform supported guide|https://websmp207.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000712240&_SCENARIO=01100035870000000202&].
It will help you out in better understanding of compatible environments.
Regards,
Shweta

Crystal Report 8.5 and 9 installed on the same box

Is it possible to have Crystal Report 8 and 9 installed on the same server?

Hi Michael,
You can install Crystal Report 8.5 and 9 on same box.
However, there are chances that dll may conflict and few issues may occur.
Try to install on different harddrives.
Regards,
Shweta

Difference between Crystal Reports Server 2008 and Business Objects XI R2

Can anyone please help me know the difference between Crystal Reports Server 2008 and Business Objects XI R2? Both the support guides says that it supports Office 2007. I have a problem in exporting the reports to Excel 2007 .I have downloaded the trial version of Crystal Reports Server 2008 but still unable to view my complete reports in Excel 2007 through infoview because few of my report's colums are truncated and it still exports in Excel 2003.I have LiveOfficeXIR2_SP4 and Office 2007 installed. Is it so that i have to switch over to Business Objects XI R2 or any other to solve my problem instead of using Crystal Reports Server 2008 or is it the problem with the version of my Live office.Pls help me regarding this..
Babita.

Babita,
request you to post the same in the BO forums for more relevant answers...
Arun

Connecting Crystal reports with dashboards and passing parameters

Hi ,
Can anyone have any document on Connecting Crystal reports with dashboards and passing parameters.
I would appreciate for this.
Thank You.

Hi Ganesh,
You can refer the following links for connecting Crystal reports with dashboards:
Dashboard integration in Crystal Reports using flash variables | Clariba Blog
https://websmp102.sapag.de/~sapidp/011000358700001426732009E/Xcelsius_EmbeddingInCR2008.pdf
http://events.asug.com/2012BOUC/0315_Integrating_SAP_Dashboards_into_SAP_Crystal_Reports.pdf
Regards,
Renu

Crystal Reports XI R2 and Delphi 7.x

Post Author: Laurent
CA Forum: Other
Hi,
i'm using Delphi 7.x and Crystal Reports XI R2 and VCL for CR XI.The Database is an Oracle 9.x or 10.x acording to our software internal version.
When i run the application i got an error 100: error loading crpe32.dll.
I look in the KB and found it is connected to a path issue or missing MFC42.dll.
I check for the last file, it exist on my machine, i edit the path, setting the CR bin folder first in the list, not helping.
Any other idea, please?
BR
Laurent

Post Author: Luca Pucci
CA Forum: Other
Hi Laurent,
I've tried the solution you suggest but it seems fix the problem only partially, i still get the 'can't load library' error form time to time, expecially after I've priented many reports from my application (that's strange but that is !).
Browsing through TCrpe source files I've found that the funcion GetCommonFilesPath in the file UcrpeUtl.pas use a registry key that is not valid if you're using CR11rel2 :
regKey.OpenKey('SOFTWARE\Business Objects\Suite 11.0\Crystal Reports', False);
if you change this line in :
regKey.OpenKey('SOFTWARE\Business Objects\Suite 11.5\Crystal Reports', False);
recompile and reinstall the package and everything seems to work fine.
You don't need to have the crpe32.dll in the same folder as your executable anymore, because now your application can retrive the correct common file directory and load the dll from its standard location.
There are some other registry key that point to version 11.0, they don't seems to be important and I decided not to change them, but eventually you can decide to change them all.
Best Regards
Luca.

End of support lifecycle for Crystal reports 9.0 and 10.5

Hi,
I am trying to find end of support date for Crystal Reports 9.0 and 10.5. Is there a link where I could find this information?
What are the option available to upgrade? Costs, etc...
Thanks

Hi,
Support for Crystal Reports ver 9 and 10.5 has already ended and as such no longer available in our Service Market Place (SMP - https://service.sap.com/support) Product Availability Matrix.
The latest version is Crystal Report 2008 V1 which has a Maintenance End date of Dec 31, 2015.
For options to upgrade and costs, please call your nearest Customer Interaction Center (CIC) and they should be able to guide you to appropriate team.
CIC's number can be found in SMP > Help & Support tab > Look up Support Center Addresses sub tab.
Hope this helps.

Crystal Report XI R2 and Windows Vista

Hi to all,
I'm working on an application written in Visual C++ 6.0 that print reports using the Crystal Report XI R2 SP4 engine.
One of my report contain a dynamic image: is a OLE object dynamically linked inside the report.
My application generate a new image and after that the report is printed.
Everything works well on Windows 2000 and Windows XP but with Windows Vista the image is stored inside the Virtual Store folder under my user profile and the reports seems to be unable to find/load the modified image.
So the report is printed with the image that is present in the standard software installation folder (under c:\Program Files\....)
Anyone have an idea how to solve this problem?
Thanks in advance,
Enrico

Hi Enrico,
Can you let us know what is the format of the image you are using.
Thanks,
Naveen.

Save printer to layout in crystal reports XI R2 and windows vista ,7 , 2008

Hi ,
I have a problem with the crystal report design , I use CRXI R2 SP6 and with windows vista , windows 7 and windows server 2008 .
The problem is that when I built the report and I go to set page from file , in the page setup form I don't have the printer select button and so I can't save the printer in the report.
With SO earlier it's all ok.
Thanks
Mauro

Hi Enrico,
Can you let us know what is the format of the image you are using.
Thanks,
Naveen.

Crystal Reports 8.5 and Vista

Similar Messages

Maybe you are looking for