Depreciation for the past 3 periods

Hi SAP experts,
Would you please share your experience on how we can run depreciation for the past periods. In our example depreciation was not run for the last 3 periods.
The previous periods are of course closed.
What is the best way to run it now?
Thank you

If possible open the previous periods and run the depreciation.
If period open is not possible, then execute AFAB with unplanned posting run mode.
Rgds
Murali. N

Similar Messages

  • Recalculation of Depreciation for the previous periods

    Hi All,
    I am new to this forum, I have one query regarding the recalculation of depreciation.
    Client wants to increase the life of the asset and depreciation change should be effected from 01/07/2010 (FY start). Depreciation has already posted from July to December 2010. We are following SLM & WDV methods.
    I know we have the options like smoothing and catchup. But client wants to update/post to respective periods and in AW01N for each period it should show the depreciation as per the change in life of the asset.
    It would be of great help, if you look into this matter.
    Thanks in advance
    Kind regards
    Shanid

    Hi Viswa,
    Thank you for your prompt reply. I tried with your answer, when I ran AFAB with posting period 1, I am getting below error.
    "You want to carry out a repeat depreciation posting run in period 001. However, the last posting run was for period 006.
    Start the repeat run again using period 006".
    Kind Regards
    Shanid

  • Can we run CK40N for the past month?

    Hi All,
    One of our users forgot to do the cost estimate for the month of May, that's why when he run CK40N (June 1), the prices went to future price, (i think because our MM is still May). I have some few questions and hoping for your positive feedback.
    1.) If we open the June period, will the future price became present price? or we need to run again CK40N?
    2.) Can we run CK40N for the past month of May? Reason is, we would like to capture the prices of Material last May.
    Please advise.
    Thank you in advance.

    Hi Tina,
    CK40N Meant for creatting cost estimates for the product and estimation is some wht which you create for future or current period. It is not possible to run ck40n for the past period.
    Now since you said that period june is not opened in MM. you can not release the price i.e.ck40n for june. check the details fo costing dates you have put in the dates parameters in ck40n. If you have run ck40n for june  then after marking the price system will set the price as a future price and same prices become the current price once you release the price. So if  you r executing ck40n  for june and june is not opened , you can not release the price. First u open the period june then execute the release functionality future price would automatically become the current price for  JUNE.
    Regards / Ashok verma

  • In oneasset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset i

    in on asset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset it is not showing first 5 periods why it is not showing? Is there any reason?

    Hi
    Repeat run you can do only for the last depreciation period. For the asset which you are tryin to post depreciation from July to Jan, please check the asset value date which you have given while posting the transactions or in the asset master.
    If the asset value date is in July, then deprecaition from July - Jan will get posted in the current month depreciation in total. You will not be able to post depreciation individually month wise using AFAB.
    REgards
    Malathi

  • Hello, I have Acrobat XI Pro for which I pay by monthly subscription. Each month, for the past three months or so, at renewal time, I receive a note stating that my trial period has expired and I cannot open my Acrobat Files. I have telephoned three or fo

    Hello, I have Acrobat XI Pro for which I pay by monthly subscription. Each month, for the past three months or so, at renewal time, I receive a note stating that my trial period has expired and I cannot open my Acrobat Files. I have telephoned three or four times each time this happens and have been told that the matter has been resolved - it has not! At one time I had paid inadvertently for three account for Acrobat XI Pro running at the same time - I only need 1. I'm afraid that I may have just opened a second account by mistake in order to open my files. I repeat, I only require one account. Would you please advise and assure me that this matter has finally been resolved and that I will no longer receive these notifications each month..

    I don't work for Adobe but it seems to me you might be signing in to Acrobat with the wrong Adobe ID.
    Check the Adobe ID you use in Acrobat.
    Check this Adobe ID on Adobe's to make sure that it has an active subscription.

  • Posting an unplanned depreciation run for the previous period

    Hi SDN forum,
    May I just ask if it's possible to run an unplanned posting run for a previous period wherein the depreciation run has already been executed?
    The scenario is more like a "repeat unplanned posting run"
    I can't seem to include this unplanned depreciation whenever I select the repeat run for the previous period.
    Please help.
    Thanks

    Hi
    Through T.Code: ABAA  you can able to post unplanned dep for previous period.
    Executing AFAB for previous
    1 - open FI Periods (OB52)
    2 - Post Unplanned Dep T.Code: ABAA
    3 - Run AFAB with Repeet run & Test run
    you feel it is ok with test run execute production run
    Regards
    Viswa

  • Terrible service for the past few months, trouble ...

    Hi all,
    I'm hoping I may be able to get more help here.
    For the past few months my phone line has been incredibly crackily and faint, my broadband (not with BT) has also been cutting out for long periods of time making it almost impossible to use.
    About 2 months ago an engineer came out and supposedly fixed the fault (I'm not even sure if there was one to fix) only a day later it was back to being crackily and faint.
    I called up numerous times and did online fault checks, and nothing came of it, they said there were no faults!
    During the past few months I noticed that when the weather is bad (wind, rain, wind and rain, frost) my phoneline is terrible and my broadband connection is non existent. I kept note of this and yup, everytime the weather is bad, so is my broadband+phoneline. It's completely fine when it's dry and calm out.
    I contacted BT again (multiple times because the service is terrible) and they said there isn't a fault with my line and that I should call my ISP.
    Today I called again because the phoneline was terrible as is the weather, they called my mobile to do a linecheck on the landline, then 2minutes later they put the phone down on me and never called back. I had waited over 30minutes just to get through..
    It seems like I'm never going to get this fixed as it's almost impossible to deal with BT on the other end of the phone, and I can't do a fault test online because my internet is dead during the times it is bad..
    I also reported that the wire connecting from my house to the telegraph pole is all loose and looks unravled, but they obviously didn't think it was a problem because they wouldn't send anyone out for it.
    What am I to do?

    I called 151 and reported the fault, they found nothing wrong. As it's intermittent they are going to run a 24hr line test and then get back to me (though he said he'd call in the morning to let me know if an engineer needs to come out.. 24hrs?) fingers crossed the weather is absolutely abysmal tonight!
    @HHGTTG If it eventually gets fixed, I'll probably always be waiting to let out a sigh when I see that the weather is bad. Haunted! I hope you're in the clear now.
    @surfer157 Perfect, I just bought my nephew a land telescope for his birthday, now i'm going to scope out the wires if nothing comes of the 24hr line test!
    My wire is all loose and looks like it has come unravled at the telegraph pole compared to the others that look like they are pulled tightly, so I'm pretty confident it's a similar, if not the same problem you had with a corroded wire. Not confident about getting it fixed anytime soon though...

  • Depreciation for the 1st month

    Dear all,
    In my client place, the go live happened on 01.04.2008. The asset transfer date is 31.03.2008. When I run afab, I am unable to calculate depreciation for the  1st month. The 1st month depreciation is getting added to the 2nd month. But i want the 1st month dep to be showed seperatly. Please suggest me how the issue can be solved.
    Thanks & Regards,
    A.Anandarajan.

    Hi can you have a look in the folowing tables with SE16 and there you can see the values posted for the depreciation:
    tabel TABA, I think no values in
    tabel T083D, I think that there in is a values (I hoop not) what is this value?
    When you set AM and transport it and have already run a depreciation run it is possible that this value is transported.
    When it is only period 01 then pehaps you can take the decission to do an unplanned depreciation run in period 02 (values fromperiod 01 and 02). In all cases you can do this as a test run
    Paul

  • Re-run depreciation for the month after creating new asset

    Hi Experts,
    I have run depreciation for 01.2009. I then created an asset with start life and acquisition posting date as 01.01.2009.
    In the asset's planned depreciation, the first planned depreciation period is 02. But the requirement is to re-run depreciation for the month and include the new asset in the run.
    Is this possible? How?
    Thanks!

    When you have run the depreciation for period 01 and you create a new asset where the depreciation starts in period 01 you see that the planned depreciation (period 01 and 02) will be posted in period 02
    It is possible to do the repeat run and then it will be posted in period 01, you will see this then back in period 01 as posted depreciation.
    You can run this as test run and for only 1 asset!

  • How to reverse the Depreciation for the excess amount posted?

    Hi Gurus,
    We have uploaded the data last month from legacy system to SAP as below.
    The Fiscal year is Jan - Dec and gone live on June 28th 2009.
    Accumulated Depreciation was taken till Dec 2008.
    Ordinary Depreciation was taken from Jan 2009 to June 2009.
    But Ordinary depreciation is not up to date in SAP as the user miss out the 2 months depreciation for each Asset but this was already posted in legacy system. All the GL Balances have been uploaded as per the legacy system. Now system is taking the previous 2 months Depreciation along with the current month. If we run the Depreciation for the current month, the system will post excess amount as it includes previous 2 months Depreciation.
    Can any one kindly suggest the process to reverse the excess amount after Depreciation posted for the current month?
    Thanks much for the help.
    Early responses will be appreciated.
    Best Regards,
    JBC

    HI
    Few clarifications-
    1. you have posted two months dep in legacy , have you transferred that dep amount wth the ordinary dep transferred from jan to june?
           If yes, that means your last posted dep month is june and accordingly you have to set the last period (6) in the SPRO for asset data transfer specifications, so system will start calculating dep from the 7th period only and will not recalculate dep for last two months.Check the last posted period mentioned in SPRO.
    2.If you have uploaded wrongly your ordinary dep for current year , then that means your Asset accounting opening balance (migrated balance ) is not matching with your Trial GL upload as well, so you need to correct your asset accounting opening balances.
         For this you need to reset your company code status from 0 to blank ( tset data always allowed for asset data transfer). And then correct the values for current year ordinary dep posted from jan to june, also check the last posted dep period as above.
    3.However you may post writeup ttype 700 to adjust the excess dep posted by any reason, you can extract last two months dep posted values asset wise from legacy system if already posted, and post the writeups for the same value in current period using LSMW.
    Cheers
    Mukta

  • Depreciation for the Financial Year 2007-08

    Dear All,
    How to run  the Depreciation for the Financial Year 2007-08, without disturbing the Depreciation of Financial Year 2006-07.
    kindlly send me details desprications
    Regards
    Pritpal

    Posting Depreciation is a periodic activity. Depreciation is posted every priod by AFAB by aseet accountants. However it is not necessory that you need to run AFAB when you are in the current period. You can run it any time; subjected your financial accounting is open for that period. In your case you need to run AFAB for every priod from 2006 to 2007. After each year is completed, you may need to run ASKBN for APC periodic posting and cose that FY in Asset account by AJAB open new FY by AJRW (Eg. 2008).

  • Wagetyes for the past one year from Cluseter

    Hi all,
    Is there any FM in sap for getting the wagetypes for the past one year from the cluster for a particular pernr
    Thanks & Regards,
    Giri.

    Hi,
    I don't know about your Requirement,but you can make use of wagetype reporter(Tcode S_PH9_46000172 in ECC6)
    which is sap Standard Report.
    In this report youu can get the wagetypes,amounts for a particular empoyee and period.
    cheers,
    Krishna Kishore.

  • Smoothing showing planning depreciation to the earlier periods

    Hi All,
    Scenario: Asset acquisition date       : Jan,01,2009
                   Ordinary depreciation date : April,01.2009
                   Acquisition value               : 500000
                   Rate of Depreciation          : 20%
    When i don't select smoothing the depreciation is showing correctly like the depreciation for the first 3months is including in the month of April (Catchup)
    But when i select Smoothing the depreciation is planning from Jan month to Dec month. But the depreciation for the first 3 months should be distribute to the remaining periods..right?
    Is there any other setting i missed here. Kindly let me know.
    Thanks
    Shankar

    Eduardo,
    I have never seen that the use from Smoothing was useful or really necessary.
    In 90% of the cases you can use straitline depreciation or multilevel with a %.
    For tax it is always based on a fiscal year, and perhaps in some cases like you example not so nice for cost accounting.
    The basis of the calculation is in SAP based on a fiscal year, Say in your case the use-full live is 5 years and the capitalize an asset in the fiscal year like May and you have done the depreciation run for April,
    Your case One that begins depreciates the entire yearly value, no matter on what date it was placed in service,
    When the depreciation start date is 01-01-2009 the the depreciation in May is for the periods January to May (5 Months)
    Your Case the other that begins to depreciate on the month of capitalization
    When the depreciation start date is 01-05-2009 the the depreciation in May is for the period May (1 Months)
    When you make the first posting, the field Capitalization is filled in with the asset value date you used in the posting and based on the period control rule in the key the depreciation start date is filled in,
    In your cases you can use 2 simulair depreciation keys like LINR with a different period control rule,
    When you fill in the depreciation start date manual then that is that the date for the depreciation start
    When the standard SAP depreciation rules not fit it is possible to create your own depreciation rules

  • Hacker problems so I reloaded Snow Leopard. Afterwards, Mac had to delete 798 items. Now looping on 4 items to delete for the past 2 weeks. Can't reboot, reload, or restart. I have to let the battery run down for it to turn off. How to fix this, please?

    I had hacker problems so I reloaded Snow Leopard. Afterwards, Mac had to delete 798 items. Now it is looping on 4 items to delete for the past 2 weeks. I can't reboot, reload, or restart. I have to let the battery run down for it to turn off. I think a big part of the problem is that someon one the internet (the hacker) was mirroring my hard drive. It seems to have locked up my system. I could be wrong about this guess, though. All I do know is that it is now looping on the last 4 iems, and I can't do anything.
    Well, I can get it to turn on, but all it does is continously try to delete the last 4 items. When I try to reload Snow Leopard, it tells me my hard drive is full and that I need to delete items.
    Can anyone help? I am so lost without my Mac. I am back on the PC, and though it works, I'm sure many of you will understand when I say it's just not a Mac.
    Thanks.

    I installed Snow Leopard using my Apple external Superdrive. I followed directions I found on the Apple site. Here is the article info:  Mac OS X v10.6 Snow Leopard: How to Erase and Install  
                     Article HT3910
                     located at: http://support.apple.com/kb/HT3910
    Everything was going smoothly until I got to the reinstall part. I had to choose to reinstall on a hard drive or network drive. I've never used a network drive; just the hard drive. It seems that's where the troubles began. I selected the hard drive. It seemed to go well, and then I got the message that I needed to delete some files because I was out of space. I chose to get rid of my music files, but, there were only 636. I don't know what the rest of the files were. I was using the Secure Empty Trash command.
    That was my first time doing an erase and install. I tried to do it again, but I now get a continuous error telling me that my hard drive is full and I must delete files. Only I can't delete files because 4 files are still being deleted and my computer won't let me stop the process.
    I found out about the hackers mostly by the fact that whenever I used to watch something like Hulu or Netflix, I never had problems with internet connection or speed. Lately, I had internet connection problems. I went in to check my settings for my internet provider and found out the settings had been changed to public and all these extra computers were connected to my network.

  • Been sat here for the past 5 hours trying to figure out why itunes wont download, it says error and something to do with Microsoft? Help me please.. getting a bit bored?

    been sat here for the past 5 hours trying to figure out why itunes wont download, it says error and something to do with Microsoft version? Help me please.. getting a bit bored?

    i have this problem too
    my dad thinks its because itunes is getting overloaded

Maybe you are looking for