Elements 10 Manual

where can I get the pdf manual for elements 10?

wing2012 a écrit:
Do you know what the XMP files are for??   
Those xmp files are created when you edit metadata (tag, rate, add caption, change date...) for files which do not support writing directly those changes in the original file. Typically they are used with raw files, while jpegs support editing the metadata section in the original file. With raw files, they also store your editing actions in the ACR module (the position of sliders).  If you delete them, you'll lose nothing of your images, but you'll lose your added information for metadata or your editing 'recipe' for raw files. They are tiny text files. You can check what is in those xmp files with a simple text editor like notepad, or in the properties of the file in the editor.

Similar Messages

  • How to highlight a specific element of an array

    I'm having some trouble selecting which element in an array has key focus. I want to be able to selectively highlight individual elements in an array of strings and set the key focus so that the user can immediately enter the text into that specific element.
    I have been able to get "selection.start" and "selection.end" to work, but when I get a reference to "array element" it always returns a reference to the last element manually clicked. This way, I can only programatically highlight different elements by manually clicking on them, which somewhat defeats the purpose.
    Does anyone know if this is possible, or if I need to move to tables or something else in order to give me this functionality?
    I'm using LV 6.1
    on W2k.
    Thanks
    Shane.
    Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)

    I had the problem that I would like to highlight more than one cell in a 2d array.
    multicolumn listbox is very slow working with large data volumes so I had to use a 2d array instead, but then I lose the possibility to highlight.
    The solution I used was to bundle a LAD and control an put this in the array, takes a bit more coding but works fine. 
    Attachments:
    2d array with marker.vi ‏23 KB

  • Creation of cost elements automatically

    Hi,
    When I selected "manual creation of cost elements" in OB13, Then we can create a group of cost elements in OKB2 followed by OKB3 and SM35.
    Even I need to do same thing  I when I select " automatic creation of cost elements" ??
    I tried selecting " automatic creation of cost elements".  and I checked in KA03 whether it had created any cost element automatically. but it didnt created any thing...
    Please suggest..

    Dear Santosh Dharana,
    Good Question.  i can clarify you. this question
    1. when you select in ob13 create cost elements manually
    when your are using in obk2  we have to maintain here Acc from no. to Acc to no. ranges for Gl's and cost element categeory.
    after we can run batch in put in obk3 & SM 35 it's updated successfully.
    Note: After execute, *when you are try create another GL account with cost element we have to give cost element categeory by manually.
    2.when you select in ob13 create cost elementsAutomatically
    when your are using in obk2  we have to maintain here Acc from no. to Acc to no. ranges for Gl's and cost element categeory.
    after we can run batch in put in obk3 & SM 35 it's updated successfully.
    Note: After execute, when you are try create another GL account with cost element we don't have to give any cost element categeory here  system automatically give .
    Please try it.  i worked for this one
    Thanks & Regards
    shankar

  • Multiline element in a SAP mail

    Hi all,
    I need to show the contents of a multiline container element in a SAP mail and the workflow builder let me choose if I want a line break or not.
    Is it possible to avoid that <ELEMENT NAME not found> is shown in the SAP mail when the element is empty? It's not very nice to see.
    Thanks in advance.
    Kind regards,
    Angelo
    SAP v4.7

    Hi,
    You got to create that Multiline Container element manually in that Mail Step's Standard Task and do the required binding from Workflow to that Standard Task.
    Before testing, please make sure that you refreshed your BUFFER using <i>SWU_OBUF</i> transaction.
    I hope this should solve your problem.
    Regards,
    <i><b>Raja Sekhar</b></i>

  • Creation of secondary cost element

    Hai SAP Gurus
    Could any one please let me now how to create secondary cost element in SPRO.
    Thanks.

    You can create secondary cost elements in KA06. There is no pre-requisite of creating GL accounts.
    Cost elements describe the origin of costs. Cost elements are defined as either
    primary and secondary. Primary cost elements arise through the consumption of
    production factors that are sourced externally. Secondary cost elements arise
    through the consumption of production factors that are provided internally.
    The Chart of accounts contains all general ledger (GL) accounts belonging to
    Financial Accounting.
    Expenses and Revenue accounts in Financial Accounting correspond to
    Primary Cost and Revenue Elements respectively.
    Secondary Cost Elements are used exclusively in CO to identify internal cost
    Flows such as assessments or settlements. They do not have corresponding
    General ledger accounts in FI and are defined in CO only.
    When you create a cost element, you must assign a cost element category. This
    Assignment determines the transactions for which you can use the cost element.
    You can create cost elements automatically by making default settings that are used
    To specify the cost element, or cost element interval that you wish to create.
    You can create cost elements manually in bulk with the help of LSMW or BDC.
    Primary Cost Element Categories:
    1 - Primary costs / cost-reducing revenues
    3 - Accrual / deferral per surcharge
    4 - Accrual / deferral per debit = actual
    11 - Revenus
    12 - Sales Discounts
    22 - External Settlement
    Secondary Cost Element Categories:
    21 - Internal Settlement
    31 - Order / Project results analysis
    41 - Overhead Rates
    42 - Assessment
    43 - Internal activity allocation
    50 - Project related incoming orders: Sales
    51 - Project related incoming orders: Others
    52 - Project related incoming orders: Costs
    61 - Earned Value
    Regards,
    Ravi

  • NXSD is missing first element

    Hi ,
    When I test the nxsd generated I see the first element is being used for differentiating the records and it is missing from the output xml.But I want that to appear in the output xml.
    I treid modifying the nxsd to include c1 element manually it didn't helped.
    <xsd:choice minOccurs="1" maxOccurs="unbounded" nxsd:choiceCondition="fixedLength" nxsd:length="4">
            <xsd:element name="RECORD1" nxsd:style="array" nxsd:cellSeparatedBy="${eol}" nxsd:conditionValue="P03A">
              <xsd:complexType>
                <xsd:sequence>
                  <xsd:element name="C2" type="xsd:string" nxsd:style="fixedLength" nxsd:length="3" />
    C1 elements declaration is missing from the generated nxsd. I am expecting the value "P03A" to be present in the output xml,during the initial config of nxsd I used these 4 characters to differentiate the records.My records have data PO3A,P03B etc...where the 4th character is the differentiator.The data is being used for identifying the different records in the flat file and it is not appearing in the output xml.

    This is most probably because the Periodicity input value has been configured as "Required" and no value has been input for it.
    Please enter a value and try to re-run Quick Pay.

  • Parse file without xml specification or document element

    I have a large (600mb) log file that is in xml format but it does not have an xml specification and has no document element.
    file looks like this:
    <message>...</message>
    <message>...</message>
    <!-- ... many many many more <message> elements -->
    <message>...</message>
    <message>...</message>
    I have written a class that overrides the SAX DefaultHandler but now want to be able to parse the document without having to add the xml spec and document element manually.
    I've thought about writing a subclass of FileReader that adds the xml specification and document element before reading physical file but would also need to add closing document element at end of file.
    Is there a simpler way?

    Hi,
    There is another way around the problem of adding a missing root node. This involves adding an extra DTD file and a xml file, like this one:
    <?xml version='1.0' encoding='UTF-8' standalone="no"?>
    <!DOCTYPE messageSet SYSTEM "logfile.dtd"
    [<!ENTITY data SYSTEM "logfile.xml">]
    >
    <messageSet>
    &data;
    </messageSet>
    This file "includes" the logfie.xml, as an external entity, with your messages as child nodes of element messageSet.
    In your program you refer to this xml file when parsing the messages.

  • Premiere Elements Disk Menus does not show in replay using Mac Pro OS X 10.9.3

    I recently installed Premier Elements 12 on my Mac Pro OS X 10.9.3 (Maverick).
    Naturally I want to get the highest possible quality to show off on the TV using a standard DVD player.
    Outputting to DVD not using AVCHD retains the menu but not on AVCHD, what am I doing wrong?
    The Output Quality using just DVD and not AVCHD is lousy, what have I missed?

    SigiPC
    Thanks for the reply.
    Objective Miscellaneous
    Let us start with your objectives. If you are restricted to a DVD disc, then your export choices from Premiere Elements will be
    DVD-VIDEO widescreen on DVD disc (720 x 480 stretched to 856 x 480 for display after encoding)
    or
    AVCHD format on DVD disc (1920 x 1080 16:9)
    Disc menus are possible as described for main menu page, scene menu page, main menu markers and scene markers. The players will recognize the stop markers placed in a Premiere Elements burn to DVD-VIDEO on DVD disc, but will not recognize the stop markers in a Premiere Elements burn to AVCHD on DVD disc. There should not be problem with main menu markers or scene markers in either choice.
    Also, AVCHD on DVD is not playable in the standard DVD player. You need a Blu-ray player that supports AVCHD on DVD disc. Many do, but some may not. The specifications of the player is your guideline.
    For AVCHD on DVD disc, you do not need a Blu-ray DVD burner to burn to AVCHD on DVD disc. That can be done with a DVD burner.
    And, under all conditions, a stop marker should never be placed at the end of the last item on the Timeline.
    Specific Replies
    What disk menu?  I am talking about “disk menus” as per page 243 of Premiere Elements Manual.
    It was my impression that you said that "Disc Menus Do Not Show...", so I was asking which specific disc menu theme are you using? And, is this "do not show" applicable to all the disc menu themes that you have tried to work with?
    I am using a Panasonic Blu-Ray player on the TV.
    Are the disc menus of your Premiere Elements DVD-VIDEO or AVCHD on DVD not displaying solely with this Panasonic player? Or, is the same observed with computer playback of the DVD product? If the missing menus in the end product issue that brought you here involves solely the Panasonic player, then I would ask if you have checked the player for any option that would control the display of menus in the playback?
    Not sure if I am using “interlaced video” but you would know from my input sources mentioned above.
    You wrote "My source media is output from iPhoto and Fotomagico slide shows whose output is MP4 MOV or M4V and if played back in Quicktime are of very acceptable quality (H.264 1920X1080)". That does not tell me if 1080p or 1080i, but I suspect that it is 1080p. The MediaInfo properties readout will give a definite answer.
    http://download.cnet.com/MediaInfo/3000-2169_4-10413046.html
    Just be careful for unwanted carry alongs with the MediaInfo free program. But iPhoto and Fotomagico should be telling you before export whether you are exporting 1080i or 1080p. My main focus on the Premiere Elements 1080p DSLR aspects related to slideshow is the fact that that Premiere Elements DSLR project presets seem to give consistently a sharper photo image in the end product. So when applicable (photo and video wise) it is the preferred route for me and others.
    “Quality area” and space requirements are not of concerns at this stage since present show length is not even 30 minutes – or should I be concerned for some other reason but space?
    As routine, the Quality area Space Required and Bitrate should be known, even for your 30 minute Timeline content duration. You should be working with a check mark next to "Fit Content to Available Space" and watching the Bitrate in that area. Anything lower than the maximum 8.00 Mbps indicates that the program is making a fit by lowering the Bitrate. The extent that it does not impacts the quality of the end product. Also, of note, the that Bitrate is a variable one in the end product.
    This may or may not affect what you are doing now, but it is important information to include in the discussion "just in case".
    Also, related trivia...DVD disc marked 4.7 GB/120 minutes is in reality 4.38 GB; DVD disc marked 8.5 GB/240 minutes is in reality 7.95 GB.
    Are we any closer to getting at why your disc menus are disappearing after end product creation in Premiere Elements and at playback with your Panasonic player?
    Please review and consider.
    Thank you.
    ATR

  • CD/DVD template Adobe Elements 8

    Whenever I want to print on a full face printable CD or DVD I use Photoshop Elements to create the design.  To ensure that everything is kept within the outer and inner diameters of the DVD (e.g. to avoid the central hole from being near a person's face!), I suspend a piece of thin glass in front of my computer screen, on which I've drawn around an old DVD disk, I then create my design looking through the glass.
    Instead of using this rather cumbersome way of doing it, I believe it is possible to create the same sort of transparent image template in Photoshop Elements.   I have tried to work out how to do this without success and the Photoshop Elements manual (page 7) only tells what you CAN do, but not the actual procedure as shown below right.
    Could someone please tell me how to do it.
    Thank you.

    Have you tried the Avery templates for Photoshop?
    Quicksearch | Avery

  • Container element 'NODEOBJECT' does not exist

    Dear Gurrus,
    While creating clarification case category i am having  this error "Container element 'NODEOBJECT' does not exist" .
    kindly help me out in resolving these issue.
    Regards,

    Hi,
    I think you need to check  Note 1082707 - Error message 'Container element ... does not exist'
    Symptom
    You have created a container element manually in a case category and you are trying to define the dataflow but in the binding editor you are receiving error message SWF_EXP_001 035 'Container element ... does not exist'.
    Other terms
    FP-EMMA, BPEM, EMMACCAT2
    Reason and Prerequisites
    The problem only occurs if you create an invalid container element that contains one or more spaces in the element name.
    Solution
    Choose a valid element name that starts with a letter and contains only characters, numbers, or underscores. The following correction does insure this.
    See the full note if it can be of help.
    regards,
    David

  • PSE 9 Manuals + search

    I searched (and found) the forums for where to find PSE 9 manuals online. Someone answered the question by putting two links to PDF's in the reply. I clicked to the first one (about organizer) and accidently closed the forum page afterwards as well. Signed back in (logged in) and now this thread (or any other, for that matter) is nowhere to be found through search. What am I missing? I wanted to download the second manual too but search says there are now 0 results for any search (in the PSE forum) for any combination of Photoshop + Elements + manual + PDF.
    Help! Please?

    Thank you Elizabeth. I have posted the links for the help manuals here.
    PDF filefor Organizer.
    PDF file for Editor.

  • Is Lightroom Marginalising Elements?

    I do the vast amount of my work in Lightroom, so couldn't justify Photoshop and bought Elements 7.  LR automatically recognised Elements as an external editor.
    When LR 2.7 came out, I couldn't update Elements 7 to ACR 5.7, so had to get Elements 8 to be able to upgrade to it.  When I pressed CtrlE in LR, nothing happened.  In external editor settings, there was a blank where Elements had been, with the message "Edit in Adobe Photoshop (not found)".  I had to set up Elements manually, as if it were a non-Adobe product.
    Does Adobe want Lightroom/Photoshop to be the standard, or is it one of it's ploys to try and keep us updating and upgrading?

    I just noticed - by reading another post - that I only supplied you with half of the truth. What has to be entered in the registry is the following values:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\PhotoshopElementsEditor.exe]
    @="C:\\Program Files\\Adobe\\Photoshop Elements 8.0\\PhotoshopElementsEditor.exe"
    "Path"="C:\\Program Files\\Adobe\\Photoshop Elements 8.0"
    Please also see this TechNote describing the same issue for Photoshop CS.
    Beat Gossweiler
    Switzerland

  • Batch element raise error for few cases as Multiple entries are not allowed

    Dear
    Element type :' NON-RECURRING'
    Multiple entry :' un-checked'
    We have a commission element as non-recurring. As per company policy we allow this commission on Assignment criteria and it got successfully transfer we run it previous month. But today we are doing the same activity and getting error “Multiple entries are not allowed for this entry” in two cases while batch validation. However when we enter this element manually under the assignment element entry window, it allow user to save without any restriction.
    So, why system not allow it through batch window.
    I am very thank full to you, pls very critical.
    Pls advice.

    User uploaded duplicate assignment for the same element, therefore system was not being allowed to process for that batch. we removed duplicate record and the error was removed.

  • Numbering from standard wbs elements

    Hello,
    where do I have to define that wbs elements in a  project which is created by a standard wbs get the new number from the operative project and not the number from the standard wbs?
    I cannot find such a setting in the project profile or something like this.
    When I create a project from a standard wbs all of the wbs elements keep the numbering from the standard wbs!
    Thank you.
    Timo
    Edited by: Timo Renz on May 25, 2010 9:22 AM

    Thank you for your answer Virendra.
    I know the screen to replace the numbering manually. But I have seen the same functionality automatically in the IDES system without the question to replace and now I am searching for this setting but I cannot find a difference in the project profile.
    Caused by the number of wbs elements it`s not possible to set the numbering of each wbs elements manually.
    Is there any other object I can define this setting?

  • Service activity creation & automatic cost element picking up

    Dear All,
    We are facing a peculiar problem while creating a service activity in Project creation - CJ20N (Project Builder).
    1)     Created a project definition. ( say u2013 X200)
    2)     Created parent WBS element.
    3)     Created one Network.
    4)     Assigned one service activity to the network.
    5)     While assigning service master to the service activity, system is asking for a cost element. In other words, the cost element is not automatically picked up for the particular service master. Actually, while creating earlier project (say X100) & assigning service activity, system is correctly defaulting the Cost element.
    6)     Here the service number which we are using is the same as used in the earlier project (X100). In X100, based on the valuation class in the service master & settings maintained in the transaction code OBYC, correct GL account is getting picked up. 
    7)     We can give the cost element manually. If we do this, system is giving another message u2013 u201CSystem could not determine a consumption account for service 2000000202u201D, though it is maintained for the valuation class in OBYC.
    Why the cost element is not getting defaulted? Pl advice in this regard.
    Thanks & regards,
    Gov

    Check out the Network profile & Plant of of both the project
    Case 1 X100   May be getting defaulted from  network profile
    Case2 X 200   You might be using different network profile where you would have not maintained  CE.
    With Regards
    Nitin P.

  • Transferring Open Items, Instalment Plans and Dunning Level

    Hi all,
    We are implementing SAP IS-U for a water suplly company and we have a process in which an Installation is transferred from a Business Partner to another. For this we are using the Move-in / Move-Out functionality (trx EC60).
    So far, so good. The problem is that we also should transfer also the Open Items, Instalment Plans and Dunning level to the new Business Partner and new Contract Account.
    The questions is: can we transfer these automatically?
    We thought in different scenarios in case this is not possible, so I would appreciate if you can give us an opinion:
    1 - Use FP40 transaction and transfer FICA elements manually
    2  - Create a FOP process to perform step by step the process from CIC0. The only problem I have found is that there is not any object that allows me to transfer the open items. Does it exist? If not, this option is not valid
    3 - Use the "Change CUstomer" Functionality. Did you have any experience using this funcionalidty? The main issue I have with this is that the system generates a dummy invoice, the Move in Date is in the future, and the Account must be closed.
    Please any information will be very helpful. Thank you very much in advance!
    Best Regards,
    Lucas

    Hi Lucas,
    You can transfer the open items and the dunning level manually to the new BP and CA through transaction code FP40.
    You need to maintain the following configuration settings in the posting area 1055-
    Curr-Currency of the Cocd
    Clearing Reason-Clearing reason used for transfer
    Document Type-Document Type used for Transfer
    Only all items- blank
    Credit-X
    Transfer DL-X
    Moreover, you cannot transfer Instalment Plans through FP40, as instalment plan items are statistical in nature.
    Hope it clarifies.....
    Thanks,
    Amlan

Maybe you are looking for