Entry not getting processed

I have an Non recurrening Multiple Entries allowed element to an assignment which is not getting processed when i run payroll.
Please help
Thanks

This is to ensure that results generated by the future payroll runs are correct. Lets take a simple eg.
You have a pension element which would be 10% of Gross Pay_YTD.
Run Payroll for Jan (Gross Pay) = 1000 -> Pension = 100 (10% of 1000).
Run Payroll for Mar (Gross Pay) = 1000 -> Pension = 200 (10% of 2000).
Run Payroll for Feb (Gross Pay) = 1000 -> Pension = 200 (10% of 2000 as _YTD of Feb does not account  March figures).
In the above case the Payroll Run results generated by March would be incorrect.
So once you run Payroll for March, you can not run payroll for Feb. If you require any additional payments to be made in Feb (after Payroll for Feb and March are processed), you can run Retropay to bring forward the entries to next Open pay period.

Similar Messages

  • Data packet not getting processed

    Hi SDN's
    I m loading data from one ODS to 4 regions , the source ODS is successfully loaded from der to the data targets the load is getting failed or taking loang time .
    upto transfer rules the data is successful, in update rules data packets are not getting processed
    kindly suggest solution, points will be assigned
    thx in advance

    Hi Katam,
    In the target ODSs go to the monitor screen for a particular request -> in the menu bar go to environment -> transactRFC-> in the datawarehouse -> give the ID and date -> execute.
    Check if there are entries in that. Usually this queue will be stuck and you need to execute the LUWs in the queue manually.
    if it says transaction recorded u need to execute it manually
    Please revert if any issues
    Edited by: Pramod Manjunath on Dec 19, 2007 4:48 PM

  • Article IDoc not getting processed in PI for particle article type

    Hello All,
         I have an strange behaviour in my system.
    i.e 1, we are creating an article IDOC by using BD10 for particulat article type.
    2, IDOC created succesfully , then
    3, Process the IDOC in BD87 to push the IDOC to PI system .
    4, But i could not see the message in PI that too only for one article type.
    I'm wondering why this is not getting processed only for one article type and not for others.
    we also checked the basic filter for the message type in dist model and even i could not see any condition in PI also,
      Is there any thing else i should check? can you please help us on this.
    Regards , Sethu.

    Hi,
    Try to reimport the metadata of IDOC into PI in idx2. Also check the port definition in ECC and whether the segment is released or not. Please go through the below discussions it may help you.
    EDISDEF: Port XXX segment defn E2EDK35 in IDoc type ORDERS05 CIM type
    IDoc 0000000000181226 was saved but cannot or should not be sent
    Regards,
    Priyanka

  • Automatic update of number ranges in FBN1 is not getting processed

    Automatic update of number ranges in FBN1 (current status) level is not getting processed.
    Tried posting a customer payment document in the system though number ranges are maintained for the year 2015 the number ranges are not overlapped last year all documents are closed but still the numbers are not been picked automatically in FBN1 kindly help in this issue

    Hello Rajesh
    Please verify if number ranges are maintained correctly, verify same using transaction OBA7. Also ensure that external assignment is unchecked in FBN1. Share screenshots if possible.
    Regards
    Aniket

  • Savings Plan Contribution is not getting processed in Payroll

    Hello Friends,
    We are in the process of upgrading our system from 4.0 to 4.7, After correcting the schema as per the release/OSS notes, we are getting Savings Plan Contribution as blank (Retirement Savings).
    Cumulation values are coming thru right but current period contribution is missing.
    Earlier we had P0169 with P61, now we do not see processing class(PCLS)61 in the PCLS list. Our earlier wage types were referring to PCLS 61, I am not sure if this is causing an issue.
    Please let me know if you have any faced similar situation and have an answer.
    Thanks & Best Regards
    ravi

    Ravi,
    Appriciate if you could share the solution for your problem in savings plan contribution is not getting processed in the payroll. As I am facing the same kind od problem for my new configured benefit plan ROTH 401k plan.
    Please let me know the solution.
    Thanks & Regards,
    Sunita

  • Bulky Message are not getting processed

    Hi All,
    Recently we have upgraded our XI systems to EHP4.
    After upgrade Bulky files are not getting processed into XI system. Small files are getting processed successfully.
    Earlier we had faced same issue at that time we have maintained some parameters in transaction RZ10, RZ11, SXMB_ADM-->
    Integration Configuration--> HTTP time out parameter.
    Same parameters are still there. But now the message is not getting processed in XI when we check into sxi_monitor. Message mapping is also not seems to be a problem as we havnt put any bulky logic over there.
    The message is not getting processed ahead of  Receiver Grouping .  Please find attached log from Performanceheader
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Receiver Grouping
      -->
    - <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="begin" host="evoxicqab">20091210134229.930472</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="end" host="evoxicqab">20091210134232.052577</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="begin" host="evoxicqab">20091210134232.059576</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="end" host="evoxicqab">20091210134232.07151</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
      <SAP:Timestamp type="begin" host="evoxicqab">20091210134232.071518</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
      <SAP:Timestamp type="end" host="evoxicqab">20091210134237.239947</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="evoxicqab">20091210134237.241179</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="evoxicqab">20091210134237.250385</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="evoxicqab">20091210134239.999045</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="evoxicqab">20091210134240.001292</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="begin" host="evoxicqab">20091210134240.001413</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="end" host="evoxicqab">20091210134240.026156</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
      <SAP:Timestamp type="begin" host="evoxicqab">20091210134240.026164</SAP:Timestamp>
      </SAP:RunTimeItem>
      </SAP:PerformanceHeader>

    Hi
    Have you checked this thread, same discussion here
    Performance of XI Interfaces
    Also check this blog
    /people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
    Regards
    Ramesh

  • IDOCS Error - Not getting processed automatically

    Hi All,
    We are loading hierarchy for a Product from R/3 system using the standard datasource.
    When we execute the info package, IDOCs are not getting processed automatically.
    We are facing the below error message.
    Error when updating Idocs in Business Information Warehouse
    Diagnosis
    Errors have been reported in Business Information Warehouse during IDoc update:
    No status record was passed to ALE by the applicat
    System Response
    Some IDocs have error status.
    Procedure
    Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
    Error handling:
    How you resolve the errors depends on the error message you get.
    But when we goto BD87 and process the IDOCs manually, these are getting posted and the hierarchy is loading.
    Can someone please guide me on what is the issue with the IDOCs and how to make them to post automatically.
    Thanks in Advance
    Regards,
    Sachin

    Hi,
    This will happen due to Non-updated IDOCu2019s in the Source system i.e., occurs whenever LUWu2019s are not transferred from the source system to the destination system. If you look at RSMO of the status tab, the error message would appear like u201CtRFC Error in Source Systemu201D or u201CtRFC Error in Data Warehouseu201D or simply u201CtRFC Erroru201D depending on the system from where data is being extracted. Sometimes IDOC are also stuck on R/3 side as there were no processors available to process them. The solution for this Execute LUWu2019s manually. Go to the menu Environment -> Transact. RFC -> In the Source System from RSMO which will asks to login into the source system. The u201CStatus Textu201D for stucked LUWu2019s may be Transaction Recorded or Transaction waiting. Once you encounter this type of status Execute LUWu2019s manually using u201CF6u201D or Editexecute LUWu2019s(F6).Just keep on refreshing until you get the status u201CTransaction is executingu201D in the Production system. We can even see the stuck IDOCu2019c in Transaction BD87 also.Now the data will be pulled into the BW.
    Hope it helps a lot.
    Thanks and Regards,
    Kamesham

  • IDOC status 64 not getting processed.

    Hi Gurus,
          I have a problem where IDOC's with status 64 are not getting processed via background job. the IDOCs weere getting processed with the background job till today evening, but suddenly no changes were made and the processing of IDOC's with status 64 has stopped and they keep filling up, when i checked the log of the Background job it says finished, and the log has the following information,
    17.09.2009 19:05:23 Job started                                                                   00           516          S
    17.09.2009 19:05:23 Step 001 started (program RBDAPP01, variant POS_IDOCS, user ID SAPAUDIT)      00           550          S
    17.09.2009 19:05:25 No data could be selected.                                                    B1           083          I
    17.09.2009 19:05:25 Job finished                                                                  00           517          S
    Kindly advise on this.
    Regards,
    Riaz.

    When i process the IDOC's using BD87, they gets processed wiwth out aany issues no dump is displayed, idoc gets a status 53 after processing via BD87.
    There is another problem how ever there are other jobs scheduled to run in the background other than this background job which are getting cancelled and have two different error logs for different jobs they are as follows.
    1) 18.09.2009 02:00:06 Job started                                             00           516          S
    18.09.2009 02:00:06 Logon not possible (error in license check)             00           179          E
    18.09.2009 02:00:06 Job cancelled after system exception ERROR_MESSAGE      00           564          A
    2) 18.09.2009 00:55:27 Job started                                                          00           516          S
    18.09.2009 00:55:27 Step 001 started (program RSCOLL00, variant , user ID JGERARDO)      00           550          S
    18.09.2009 00:55:29 Clean_Plan:Gestartet von RSDBPREV                                   DB6PM         000          S
    18.09.2009 00:55:29 Clean_Plan:beendet                                                  DB6PM         000          S
    18.09.2009 01:00:52 ABAP/4 processor: DBIF_RSQL_SQL_ERROR                                00           671          A
    18.09.2009 01:00:52 Job cancelled                                                        00           518          A
    This is a production server and the Licence is valid till 31.12.9999, and has no issues with the license.

  • RSEOUT00 - Idoc not getting processed

    Hi All,
    I have few idocs in prod.system with status 30 and they are not getting processed using RSEOUT00.
    I tried using back ground job / forgrond / BD87 also but they are not getting converted to 03 status.
    receiver port is xmlgen.
    Any thing like idoc lock ? or something other that is preventing it process ?
    Please let me know if anything.

    check out the multiple threads in SDN regarding this issue
    idoc remains random in status 30
    some of the common pointers looks to be locked IDOC (check in SM12), SM58 to see if anything is in the RFC queue (though I doubt that would be the case)..
    How are you generating your idoc? standard FM or MASTER_IDOC_DISTRIBUTE?

  • Saved entry not getting displayed in calendar

    Hello,
    We are trying to update calendar with a new entry, it get save.
    But when we try to look into Calendar, it is not getting displayed anywhere. Also tried for other days, but the same result appearing.
    Please advise on this.
    Thanks & Regards,
    Jayashri

    check if you have enabled "Group Calendar Options" for your calendar view. 
    To check this, go to the "Title, description and navigation" settings page for the calendar (this is the first option under "General Settings" on the List Settings page), In the "Group Calendar Settings" sections, set it as "No"
    --Cheers

  • SM35 session is not getting processed in background

    HI Folks,
    I am using BDC (open group, Insert group, Close Group) to create a SM35 session and calling RSBDCSUB program to process created session.
    this program is being executed in background job,
    Issue is, when this program is scheduled to run with my user ID(dialog user) is running fine i.e. session is getting processed completely.
    however, when job is schedule with background user, session is getting created with status NEW, but not processed, we have to go to SM35 and manually process that session.
    Does anybody come across such issue, What could be the reason, I could see authorization might be the problem.
    please advice.
    Thanks,
    Brahma,

    Hi brahmanandam,
    You need use  RSBDCSUB and submit it using the session name u generated...
    SUBMIT RSBDCSUB AND RETURN
                        USER SY-UNAME
                        using selection-set 'VAR'.
    Where VAR is ur variant name

  • Batch Input Session for RFUMSV50 is not getting processed.

    Dear All,
    When i am trying to transfer the Service Tax Inetrim account to Service tax final account with the help of the program RFUMSV50 the batch input session is getting generated without any error. But when i process the same in SM35 it is not getitng processed.
    Please advice on this.
    Regards,
    Rajeswari Shankar.

    Hello Rajeswari,
    Yes, this is normal.
    When batch input sessions is generated with any error, this does not mean that you can execute it after via SM35 without any error
    Moreover, you have the option in SM35 to execute it and with option "display error only", so this means that it can happen that there is no error
    For example, the profit center is mandatory, and it is missing in the document. In that case the system will display error and ask you to fulfill the profit center
    Please tell me, which error you have (message number)
    Thanks
    Tarek

  • Message ID missing and file not getting processed.

    Hi Experts,
    This is regarding an issue in Production system.
    Scenario: File to File.
    SAP PI verison : 7.0
    Interface data coming from B1 system to PI is having an issue.
    PI sender channel picks up the file from B1-FTP server,the file gets archived too, however the message ID is not getting created in communication channel monitoring and message is lost. It is not traceable.
    The message is not processed further, not visible in receiver channel nor in sxi_monitor.
    we have tried cache refresh, adapter metadata refresh, also tried creating new channels however, issue persists intermittently.
    Any help/suggestion would be highly appreciated.
    thanks and regards,
    Praveen T

    Hi Praveen
    Is it possible for you to provide the screenshot of logs from your sender
    communication channel when the file is picked up from the FTP Server?
    Also advise if the FCC is used in the sender channel, if yes check in case
    it is failing.
    Regards
    VJ

  • Huge volume of data not getting processed

    Hello Everyone,
    Its a single file to multiple idoc scenario. There is no mapping involved. But the problem is that the file is of size 50 MB having 50000 idocs . This idocs get divided and are sent to BW for reporting based on the  message id . Now since the message id should remain same for all the 50000 idocs, so i cannot split the file.
    But when i process this, it gives me Lock_Table_Overflow error . The function module IDOC_INBOUND_ASYNCHRONOUS is in error in SM58 . I have checked the enque/table_size and its 64000. i think its enough to process a 50 MB file.
    Please let me know how to proceed further with this.
    Regards,
    Ravi

    Hi Ravi,
    I don't really think this is a problem of PI itself, especially that you get the error in IDOC_INBOUND_ASYNCHRONOUS. The enque/table_size equal 64 000 might not be enough for 50 000 IDocs - just think if each IDoc requires two locks.
    Hopefully, you should be able solve the issue by setting the Queue Processing checkbox in your receiver IDoc adapter in PI. This will force IDocs being processed one by one, so that so many locks will not be created simultaneously. The only problem is that I cannot foresee, how big the overall increase in processing time will be.
    But you will not know until you try and please let us know about the results, as there might be others to follow your path
    Hope this helps,
    Greg

  • Queue Stopped, messages not getting processed

    Hello Experts,
    From the pst three days, my XI server is running slowly. All the messages are having the status green. When we check the queues, all the messages are stuck there and the error displayed is SYSFAIL (Queue stopped). If I try to execute the LUW manually it doesn't allow me giving the message "The queus is registered and therefore cannot be activated".
    I have also tried deleting the entry and restarting the message again and then it goes to the same queue and gets stuck again. What should I do further?
    Thanks,
    Merrilly

    Hi,
    To be able to initiate processing of messages stuck in the queue, make sure to set following IS configuration parameter
    MONITOR QRFC_RESTART_ALLOWED to value 1 in SXMB_ADM
    Check this
    /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
    Regards
    Seshagiri
    Edited by: N V Seshagiri on Mar 19, 2008 9:07 AM

Maybe you are looking for

  • Free DVD and Video Converter for 2nd gen. Ipod Touch?

    Is there a free online converter for DVD and video formats not compatible with Itunes. I have a dvd recorder and have transfered some of the movies to my computer and would now like to put them on the Touch. Same issue with video I have collected on

  • PI 7.30 dual stack - different time in rwb, pimon and ABAP stack

    Hi @all, I am working with the client on a PI 7.30 dual stack system. During monitoring of message processing I saw that there are differences in the time displayed while monitoring the processing of identical messages e.g. channelmonitor (mdt/channe

  • Idea Center B520 - how to add second monitor?

    I want to add a second monitor to my B520, but the only monitors I have connect with a DVI cable.  I don't see a DVI plug anywhere on the B520.  Is there a way?  If not, if I buy a monitor with HDMI connections, can I connect it to my B520 using HDMI

  • Import data from DVD

    I understand that Final Cut Express only allows import from DV and HDV tapes. But is there any way of transferring data from DVD or HDD camcorders onto DV tapes to then import into FCE?

  • Objects containing objects.Expr cannot be used as an assignment.PLS-00363.

    Hi, My database: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0. I'm working with Object types containing other object types, and I'm getting the error PLS-00363 (Expression cannot be used as an assignment). I'm putting exlpicity all 'SELF