Error occured after uploading data

Hi experts,
i have dveloped bdc for mmo1 while uploadind data the performance is poor in my excel 75,000 records are there any one give some idea....
Thanks in advance...
rajesh

Hi ,
Also try to have structure defined for all tables individually and dont directly refrence it.
Try to have the order of fields in file(application or presentation) matching exactly with internal table and order of filling columns in MM01.
Try to aviod Deep types in structures such as string or nested structure .
<< cut and paste from:
http://www.sap-img.com/basis/sap-system-performance-issues.htm
removed >>
<< Points unassigned >>
Edited by: Rob Burbank on Feb 28, 2009 10:32 AM

Similar Messages

Capturing the details of data in which error occured during uploading

Hi, anyone tell me how to Capturing the details of data in which error occured during uploading the file using BDC in backgroung mode. Please do the needful
Thanks & Regards.
Aniruddha

hi,
This declaration is used to capture the error msg. V is the std table that captures that.i have given a sample code with this..pls chk it out..
data: err type standard table of bdcmsgcoll with header line.
SAmple code:
report z_aru_bdc_new4
       no standard page heading line-size 255.
include bdcrecx1.
Generated data section with specific formatting - DO NOT CHANGE ***
parameters: p_file like rlgrap-filename obligatory.
data: err type standard table of bdcmsgcoll with header line.
data: mess(200) type c.
data: begin of it_err occurs 0,
msg(200) type c,
end of it_err.
data: begin of record occurs 0,
data element:
        viewname_001(030),
data element: VIM_LTD_NO
        ltd_dta_no_002(001),
data element: ZEMPID3
        zempid3_003(004),
data element: ZENAME3
        zename3_008(040),
data element: ZEDEPID
        zedepid_009(004),
data element:
        zsalkey_010(005),
data element:
        salary_011(013),
data element: ZENAME3
       ZENAME3_008(040),
data element: ZEDEPID
       ZEDEPID_009(004),
data element:
       ZSALKEY_010(005),
data element:
       SALARY_011(013),
      end of record.
End generated data section ***
start-of-selection.
at selection-screen on value-request for p_file.
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME           = ' '
DEF_PATH               = ' '
   mask                   = '.,..'
   mode                   = 'O' " O -- open, S -- Save.
   title                  = 'OPEN'
importing
   filename               = p_file
RC                     =
exceptions
   inv_winsys             = 1
   no_batch               = 2
   selection_cancel       = 3
   selection_error        = 4
   others                 = 5.
start-of-selection.
call function 'UPLOAD'
exporting
CODEPAGE                      = ' '
   filename                      = p_file
   filetype                      = 'DAT'
ITEM                          = ' '
FILEMASK_MASK                 = ' '
FILEMASK_TEXT                 = ' '
FILETYPE_NO_CHANGE            = ' '
FILEMASK_ALL                  = ' '
FILETYPE_NO_SHOW              = ' '
LINE_EXIT                     = ' '
USER_FORM                     = ' '
USER_PROG                     = ' '
SILENT                        = 'S'
IMPORTING
FILESIZE                      =
CANCEL                        =
ACT_FILENAME                  =
ACT_FILETYPE                  =
tables
    data_tab                      = record
exceptions
   conversion_error              = 1
   invalid_table_width           = 2
   invalid_type                  = 3
   no_batch                      = 4
   unknown_error                 = 5
   gui_refuse_filetransfer       = 6
   others                        = 7
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*perform open_dataset using dataset.
*perform open_group.
delete record index 1.
loop at record.
*read dataset dataset into record.
*if sy-subrc <> 0. exit. endif.
perform bdc_dynpro      using 'SAPMSVMA' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'VIEWNAME'.
perform bdc_field       using 'BDC_OKCODE'
                              '=UPD'.
perform bdc_field       using 'VIEWNAME'
                              record-viewname_001.
perform bdc_field       using 'VIMDYNFLDS-LTD_DTA_NO'
                              record-ltd_dta_no_002.
perform bdc_dynpro      using 'SAPLZSHAP' '0001'.
perform bdc_field       using 'BDC_CURSOR'
                              'ZEMPTAB1-ZEMPID3(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=NEWL'.
perform bdc_dynpro      using 'SAPLZSHAP' '0002'.
perform bdc_field       using 'BDC_CURSOR'
                              'ZEMPTAB1-SALARY'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SAVE'.
perform bdc_field       using 'ZEMPTAB1-ZEMPID3'
                              record-zempid3_003.
perform bdc_field       using 'ZEMPTAB1-ZENAME3'
                              record-zename3_008.
perform bdc_field       using 'ZEMPTAB1-ZEDEPID'
                              record-zedepid_009.
perform bdc_field       using 'ZEMPTAB1-ZSALKEY'
                              record-zsalkey_010.
perform bdc_field       using 'ZEMPTAB1-SALARY'
                              record-salary_011.
perform bdc_dynpro      using 'SAPLZSHAP' '0002'.
perform bdc_field       using 'BDC_CURSOR'
                              'ZEMPTAB1-ZENAME3'.
perform bdc_field       using 'BDC_OKCODE'
                              '=UEBE'.
perform bdc_field       using 'ZEMPTAB1-ZENAME3'
                              record-zename3_008.
perform bdc_field       using 'ZEMPTAB1-ZEDEPID'
                              record-zedepid_009.
perform bdc_field       using 'ZEMPTAB1-ZSALKEY'
                              record-zsalkey_010.
perform bdc_field       using 'ZEMPTAB1-SALARY'
                              record-salary_011.
perform bdc_dynpro      using 'SAPLZSHAP' '0001'.
perform bdc_field       using 'BDC_CURSOR'
                              'ZEMPTAB1-ZEMPID3(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SAVE'.
perform bdc_dynpro      using 'SAPLZSHAP' '0001'.
perform bdc_field       using 'BDC_CURSOR'
                              'ZEMPTAB1-ZEMPID3(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BACK'.
perform bdc_dynpro      using 'SAPMSVMA' '0100'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBACK'.
perform bdc_field       using 'BDC_CURSOR'
                              'VIEWNAME'.
perform bdc_transaction using 'SM30'.
*enddo.
*perform close_group.
*perform close_dataset using dataset.
endloop.
loop at it_err.
write : / it_err-msg.
endloop.
form error.
call function 'FORMAT_MESSAGE'
exporting
   id              = sy-msgid
   lang            = '-D'
   no              = sy-msgno
   v1              = sy-msgv1
   v2              = sy-msgv2
   v3              = sy-msgv3
   v4              = sy-msgv4
importing
   msg             = mess
exceptions
   not_found       = 1
   others          = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
it_err-msg = mess.
append it_err.
clear it_err.
endform.
If it is session method u can find the session in SM35 from where u can get the error log.
Hope this helps u,
Regards,
Arunsri

An error occurred while uploading one of your files. Please check your network connection and click Retry to resend your file

Just for the record:
I had received the error message "An error occurred while uploading one of your files. Please check your network connection and click Retry to resend your file" after all data apparently had been uploaded.
After trying everything recommended on the internet, I finally found the culprit: Glimmerblocker, an ad blocker!
(GlimmerBlocker version 1.4.16, Mac OS X 10.7.2 Lion)
Actually, the credit goes to the very patient German Apple support: they had finally asked me: "what software have you installed lately" ... a big applause to the guys there!
Best,
Gabriel.

In our case, it was not third party software, but a problem with our router not accepting pings. If you are using a router be sure to set-up Enable WAN Ping Respond, in the advanced settings. I reviewed my wireless router's logs and found that it was blocking ICMP Type 3 packets from Apple's server. As a result, it would give the message, "An error occurred while uploading one of your files. Please check your network connection and click Retry to resend your file." You can find the blocked packets in your log based on the time you clicked the buy button for your iPhoto purchase (in my case about a dozen times). If your packets are blocked, then that is your problem.
I should have suspected it was the connection since the message plainly said, "...check your network connection...". However, I discounted this along with so many others based on the forums, since I could connect to the internet. If there only was a way the message could have gave a little more saying, "Enable your WAN Ping Respond now, or else!"
Good fortune on your road to Macenlightenment!

An error occurred accessing a data source.

Hi,
I have seen many posts talking about this error but still i am facing the same issue. The process i have followed is:
1) created infopath form with receive data connection to SQL DB with plain username/pwd
2) placed the repaeating table of receive dataconnection, form has full trust
3) converted the dataconnection to udcx and stored it in data connection library of site collection
4) published the form for admin approval, and as i am the admin i have uploaded it and activated it
5) approved the dataconnection
6) i have modified the infoath settings to use SQL authen, data connection files , cross domain
But still i am getting this error:
An error occurred accessing a data source.
An entry has been added to the Windows event log of the server.
Log ID:6932
Regards,
Amarnath.
Regards, Amar.

hi,
I have found below log:
DataAdapterException, Exception Message: The database returns an error. Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.)
but i am receiving data only here is my query:
SELECT [Service Request],[Task Order],COUNT(*) as TotalTestCases,SUM(CASE WHEN [Status] = 'Completed' THEN 1 ELSE 0 END) AS Completed,
SUM(CASE WHEN [Status] = 'Blocked' THEN 1 ELSE 0 END) AS Blocked,SUM(CASE WHEN [Status] not in('Completed','Blocked') THEN 1 ELSE 0 END) AS InProgress FROM
DashBoardView where SRStatus = 'Active' group by [Service Request],[Task Order]
is my calculated columns is giving error? but when i run my wuery its giving correct output
Regards, Amar.

SQL Service Broker 2012: the connection was closed by the remote end, or an error occurred while receiving data: '64(The specified network name is no longer available.)'

Anyone can help with the below issue please? Much appreciated.
We have about 2k+ messages in sys.transmission_queue
Telnet to the ports 4022 is working fine.
Network connectivity has been ruled out.
The firewalls are OFF.
We also explicitly provided the permissions to the service account on Server A and Server B to the Service broker end points.
GRANT
CONNECT ON
ENDPOINT <broker> <domain\serviceaccount>
Currently for troubleshooting purposes, the DR node is also out of the Availability Group, which means that we right now have only one replica the server is now a traditional cluster.
Important thing to note is when a SQL Server service is restarted, all the messages in the sys.transmission queue is cleared immediately. After about 30-40 minutes, the errors are continued to be seen with the below
The
connection was
closed by the
remote end,
or an
error occurred while
receiving data:
'64(The specified network name is no longer available.)'

We were able to narrow down the issue to an irrelevant IP coming into play during the data transfer. We tried ssbdiagnose runtime and found this error:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>SSBDIAGNOSE -E RUNTIME -ID 54F03D35-1A94-48D2-8144-5A9D24B24520 Connect to -S <SourceServer> -d <SourceDB> Connect To -S <DestinationServer> -d <DestinationDB>
Microsoft SQL Server 11.0.2100.60
Service Broker Diagnostic Utility
An internal exception occurred: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
P 29830 Could not find the connection to the SQL Server that
corresponds to the routing address tcp://XX.XXX.XXX.199:4022. Ensure the tool is connected to this server to allow investigation of runtime events
The IP that corresponds to routing address is no where configured within the SSB. We are yet unsure why this IP is being referred despite not being configured anywhere. We identified that this IP belongs to one of nodes other SQL Server cluster, which has
no direct relation to the source server. We failed over that irrelevant SQL Server cluster and made another node active and to our surprise, the data from sys.transmission_queue started flowing. Even today we are able to reproduce the issue, if we bring
back this node [XX.XXX.XXX.199] as active. Since, its a high business activity period, we are not investigating further until we get an approved downtime to find the root cause of it.
When we get a approved downtime, we will bring the node [XX.XXX.XXX.199] as active and we will be running Network Monitor, Process Monitor and the SSB Diagnose all in parallel to capture the process/program that is accessing the irrelevant IP.
Once, we are able to nail down the root cause, I will share more information.

Message "iTunes could not sync contacts to iPhone because an error occurred while committing data"

Hello all. I recently replaced the HD in my MacBook Pro. Just after, I retrieved my old files from the Time Machine backup, which I made just before the replacement. During the first sync of my iPhone via iTunes and while I was trying to sync my contacts I saw the message "iTunes could not sync contacts to iPhone because an error occurred while committing data". After that, I lost my iPhone contacts (I have them only from iCloud). The only problem is contacts, all the others (Calendars, Apps) are normally syncing. Does anybody has a solution? Thanks in advance!

hello,
There was a similiar posting that I have seen from others and they found out that the back up was bad. https://discussions.apple.com/message/6139533#6139533
I would use a previous backup (earlier one) to the one you have tried to just do.

"...an error occurred while sending data from the iPhone" - caused by latest iPhone update today?

I've been syncing my iPhone to my (non-apple) desktop for several months without difficulty.
Today I accepted the latest upgrade to my iPhone software.
Since it installed, it will not sync.
It gives the error message "iTunes could not sync calendars to the iPhone "Steve's iPhone" because an error occurred while sending data from the iPhone." After rebooting the desktop, the error repeats, and it's now in hour 2 of the continuing message "Syncing Steve's iPhone (Step 2 of 2) - Finishing sync"
Has anyone else run into this Undocumented Feature of the latest upgrade?
As bugs go, this is pretty serious for those of us who depend on syncing the iPhone and desktop for our business!
Thanks to anyone who can help!
Steve Callender

Tried rebooting the phone, and now it works.
Guess there's 2 lessons here -
Boot again when installing new SW, even if the phone reboots itself during installation, and
Boot to see if that fixes a problem before posting it.
Steve

Error occurred in the data selection,If i do Repeat, then it is working fin

Hi Freinds,
Here is the error message,
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Details Tab:
Extraction (messages): Errors occurred
Error occurred in the data selection ....
If i do Repeat Delta, then it is working fine.
As it is a daily load, manually repeating the load from the past 10 days.
Have tried using program RS_TRANSTRU_ACTIVATE_ALL.
Any inputs pls.....

Hi Friends,
Thanks for your valuable inputs, Problem is solved.
The Reason is that, there is a time difference in the r/3 system and bi system.
The tolerable time differene shud be only 60 seconds.
Basis guys took down time at the OS level and hav made the timers sync.....
The problem is on the source system GNP time differences
persists, which can cause the problem with delta upload .
Universal Time Coordinated UTC....: 1291187626
Date and time of database.........: 01.12.2010 12:46:59
Date and Time of R/3-Kernel.......: 01.12.2010 12:43:46
Date and Time of ABAP-Processor...: 01.12.2010 12:46:58
ABAP Time zone Setup ..............: 19800
Date and Time / local time ........: 01.12.2010 12:43:46
This leads to an exception of the delta processing, because this
tolerates a deviation of 60 seconds only (When the repeat is processed,
the "local time" in the ABAP is higher than the qrfc counter at the time when the delta was processed -> So a repeat works fine).
Please synchronize the timers like described in attached note 101726 and 741734 to eliminate the time difference .
With Regards
Badri Thiriveedhi.

Error occured while uploading to ODS.

Hi,
error occured while uploading to ODS from R/3........
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Second step in the update
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.

Hi varun,
thx's 4r reply
I already check it in st22 transaction..... it's showing short dump.
ShrtText
    Exception condition "NOT_EXIST" raised.
What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
What can you do?
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
     termination messages, especially those beyond their normal deletion
    date.
    is especially useful if you want to keep a particular message.
Error analysis
    A RAISE statement in the program "SAPLRSSM" raised the exception
    condition "NOT_EXIST".
    Since the exception was not intercepted by a superior program
    in the hierarchy, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
and one more thing. i don't know about the locks can u plz clear about that locks......
when i enter the sm12 then its asking
Lock argument and table name
4r wht perpose these thing's
thank's in advance
regard's
venkat

Error occurred while uploading iPhoto book

I have been trying to upload (buy) a photobook through iPhoto. It builds OK and seems to transfer all the data (60MB) then stops and displays an error message:
"An error occurred while uploading one of your files. Please check your network connection and click Retry to resend your file"
Network is fine and I have tried the following suggestions:
Rebuild iPhoto
Throttle restricted upload (this seemed counter intuitive but the data tx seemed correct)
Would appreciate any workable ideas.

David (Apple Photo Services) wrote:
If it helps I will also leave you with a few steps I have when it comes to errors in the account >stopping the purchases. If the steps Old Toad said did not help, I am hoping this is what it takes:
A) Please delete your net services folder. To do so, please follow the path below:
MacintoshHD ->Library -> Application Support -> NetServices
Single-click on the NetServices folder and delete the entire folder.
B) Make corrections in Apple Store
1. Go to the Apple Store online and click Your Account in the navigation bar:
http://store.apple.com/us
2. Sign in using your Apple ID and password.
3. Click "Change account information" on the right and sign in again.
4. Verify or enter your Billing and Shipping address information.
5. Delete your credit card information in the Method of Payment section, and then re-enter it. Do >not enter spaces in your credit card number. Click Continue.
C) Next go back to iPhoto:
1) Select the "Buy Book" button.
2) Click on "Account Info" and then "Edit Billing information".
3) Change the type of card, and then blank out the remaining fields: card number, security code, >and expiration date.
4) Click "Save".
5) You should then receive an error that you will need to fill in those fields.
6) Complete all the fields again and click "Save".
Subsequently, please attempt to submit your order.
Thank you for your patience in this matter. I hope to hear from you soon.
Sincerely,
David H
Apple Photo Services Customer Support
http://www.apple.com/support/photoservices/ww/
Thanks OT. I've done this with no improvement, David H from Apple suggested a similar solution.
I've since copied the iPhoto library to the MacBook Pro and tried to upload from there. I'm now getting a billing error so think I must have made an error when I re-typed. Trying again....
mrtotes

Cannot sync calendars... error occurred while mingling data???

Error message after iPhone update:
iTunes could not sync calendars to the iPhone...... 's iPhone because an error occurred while mingling data.
A bug?
I have a stock iPhone.
What gives?

Carl Jonsson wrote:
Error message after iPhone update:
iTunes could not sync calendars to the iPhone...... 's iPhone because an error occurred while mingling data.
A bug?
I have a stock iPhone.
What gives?
There was recently a tech article about this but I can't seem to find it. I remember it because of the odd use of the word mingling. The problem seemed to be triggered by Calendar events that have a blank title field. You may have accidently created one.

"Error occurred in the data selection" on init delta load ODS- InfoCube

Hi, gurus and experts!
I'm trying to do Init delta load from 0FIAR_O03 ODS into 0FIAR_C03 InfoCube in PRD env. by InfoPackage "Initialize with delta transfer (with data transfer)". Immediately after the load was started I got error
"Error occurred in the data selection"
with details
"Job terminated in source system --> Request set to red".
Where are no any short dumps. There are 1 activated init load in ODS - nearly 6 500 000 records.
Any ideas about error? And the way I can load data?

Hi Gediminas Berzanskis,
I faced the similar error when I tried to load data from an ODS which contained huge amount of data to a Cube. Even in your case the volume of data is more (around 6.5 million records). The error could be due to the table space issue, please contact your Basis team to check if enough table space exist for both the data targets.
Meanwhile you may also check the RFC connection of the Myself source system.
You can replicate the DSO datasource once and then reactivate the transfer rules using the program RS_TRANSTRU_ACTIVATE_ALL.
Try load with a small amount of data with a Full load option and then with a delta option..
Hope this Helps,
Prajeevan (XLNC)

How to solve "error occurred in the data manipulation engine"? 64bit Windows 7

Hi all
I'm having quite a testing time here trying to use the new SAP PA 2.0. After installation the software launches, the Automated Analytics seems to work fine but not the Expert Analytics.
Steps as follows:
Launch PA
Choose and launch Expert Analytics
Choose Try with Samples
Open the Dairy Wholesaler file
Error: An error occurred in the data manipulation engine. Check the manipulation parameters. (HDB 01001)
I also get this same error when I try to create my own New Dataset.
I’m on 64bit Windows 7 Pro
Is there anyone who knows how to solve this problem. I've searched the SCN and online and have tried the following:
1. Uninstall and re-install. Doesn't help
2. Uninstall and delete old lumira related folders on the C drive e.g. the SAPPA and SAPVI folders on the C drive, then re-install.
Much appreciated if anyone could shed some light on this. I've previously had Lumira working with no issues. I've since uninstalled Lumira, Predictive Analytics, and Infinite Insights (as PA 2.0 is all of this combined)
Regards
Ria

In case anyone has the same problem, I found the the following helpful (taken from Error after upgrading to 1.18 ). The solution is for Lumira however its the same steps for PA2
1. You might want to try a ‘clean’ uninstall / reinstall . After uninstalling, try deleting these folders:
C:\Users\Public\sapvi
C:\Users\<user>\AppData\Local\SAP\Lumira
C:\Users\<user>\AppData\Local\Temp\sapvi
In this step I searched for every SAP related file in AppData in the Public, User, and my own username folder under \Users\
2. Next, to launch the application, explicitly click "Run as Administrator" on the install file

TDMS file error occurs after several hours

I have a compiled LabVIEW 2010 SP1 executable running on a Windows 7 PXI computer that is occasionally producing the following error message:
"LabVIEW: LabVIEW could not load the TDMS file component.
The top-level VI <my VI's name> was stopped at unknown on the block diagram of <my VI's name>"
This program is interfacing with equipment under test over a number of PXI cards and ethernet connections. It alters inputs to the system based on script commands, while receiving and displaying outputs. During testing, state changes are sent to a TDMS file. The system can run for hours but will usually produce the above error message... eventually.
The error seems to indicate that a LabVIEW file is missing, but the TDMS files are being created, so I may not be understanding the meaning of the error. Does anyone know what the actual cause(s) of this error message are?

The code writes to the TDMS file using the "TDMS Write" VI from the TDM Streaming Palette. These write VIs are located in 12 different sub VIs in a program loop within my main VI. Every 50ms they execute, service the I/O, and write to the TDMS file if data in the particular sub VI has changed state. Some are writing floating point numbers, most are writing strings. There are about 750 total channels being written. I know that posting the code would be more usefull than describing it, but I think posting the source code would be frowned upon by my company. There are over a hundred custom VIs and external hardware connections that are required to effectively run this code anyway.
Regarding timing, there doesn't seem to be a particular amount of time that has to pass before this issue occurs. I was given a screenshot that shows the error occured after 11 hours of running. I was also told that the same error had occured about 6+ hours into a test once. I can say that this error doesn't seem to occur quickly, as in within the first hour or so. It seems to require long duration tests.

I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data

I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data on my wifes phone how do you correct problem without losing calendars info on phone.

One thing that might help.
1. open itunes preferences from the edit menu and click on the devices tab.
2. check the box to disable syncing for iphones connected to itunes and click ok.
3. Then click the button to reset sync history.
4. Now click ok to close the preferences window.
5. connect the iphone to itunes and go to the info tab.
6. scroll to the bottom of the info page and check the box to replace the ical data on the iphone.
7. then click apply on the bottom right of itunes.
This will overwrite any events on the iphone, including any events that has become corrupted.
Hope this helps

Error occured after uploading data

Similar Messages

Maybe you are looking for