Error with Application Loader

So I'm about to submit my app and I keep getting three errors in the Application Loader:
1. /build/Debug-iphoneos/ .app is not a valid location for the app. It must be at the top of the archive
2. Bundle identifier:
____.com.______.____ differs from the bundle identifier: com._____._______ and had it as the first one in info list but I changed it and it still gives me this problem...
3. Application failed codesign verification. The signature was invalid or it was not signed with an Apple submission certificate.
So this one I checked my distribution certificate to see if that was the problem and it said it couldn't find the certificate pair in my keychain so I deleted it and added it back on and it worked fine but it still gave me this error...
Please help me!

Hello, everyone
I took advantage of the program www.apparchitect.com, after I made it my new app, then I try to download the source file Payload.ipa using the Application Loader. Throws an error ERROR-9000, see screen shots. Please help me resolve this problem, thank you to those who will write step by step instructions on how to remedy this error. I am a novice developer.

Similar Messages

App update with application loader: bundle is invalid - CFBundleShortVersionString error

Hi,
A client of mine is trying to update their app. They created a new multi-issue viewer (using ver18).
When uploading this app with application loader they receive the following error:
"This bundle is invalid. The key CFBundleShortVersionString in the info.plist file must contain a higher version than that of the previously uploaded version".
(see screenshot)
When checking, the update app indeed had a lower version (iTunes) number than the one already on the app store. So I figured that was the issue, but when selecting a higher version and trying again the error still persists.
I couldn't really find anyone on the forum who previously had this issue.
Tips are always welcome
Thanks

Hi
I have the same problem, we built the first app for our client through WoodWing, now we want to update the app with the Adobe one. During the upload of the new app, created with the Adobe Viewer Builder we get this error code:
This bundle is invalid. The key CFBundleShortVersionString in the Info.plist file must contain a higher version than that of the previously uploaded version.
When we open the Info.plist we can see that the Adobe Viewer Builder creates 1.0.1 for the Bundle Version String short, while the older WoodWing app has 2.1.
Marketing version in Viewer Builder = Bundle Version String Short or ?
That means everybody who is changing from the WoodWing to the Adobe reader needs to go through Adobe?

Unable to deliver iphone5 app with application loader

i get an error itms 9000 when trying to deliver my app with application loader
i understand that i miss icon 568h
my air version is 3.8.0.440 and there is not possible way to download png file with size 568h
please help

Have you tried this against our latest AIR release?

When i try to submit an application with Application Loader, the wizard is blocked on "Send API itunes connect usage, waiting for response". Any idea ?

When i try to submit an application with Application Loader, the wizard is blocked on "Send API itunes connect usage, waiting for response". Any idea ?

Thank you, Vincent! It's still down for me, but at least I know someone had the same issue. Hoping it's going to work over here soon
Best!

Errors Updating App with Application Loader

I have an app that I transfered in on itunes Connect and I am now trying to update it with a new version that I have created in Indesign.
The App version was 1.1 and the next version i want is version 2.0
Adobe have bumped up my app to version 2.0 for me so it shouldn't error when I try to udate it but I'm still getting errors when uploading the .zip file to the application loader. See screenshot...
Is there something I should have done once adobe bumped up the version?
I'm at a bit of a loss as to what to do next. Any Suggestions?

Hi Neil,
Well, I'm experiencing the same problem as everyone.
We contacted gold support, and told us that it was a known issue and being investigated. The Bug number is 3632264. Any updates?
So, I tried tweaking App Loader and App Builder for the "version mismatch" and I think I solved it. However, the only problems left are the one's below. What do I do next?
Thanks!

Error communicating with iTunes store, with application loader

Hello ..
I have a program I would like to submit it in the app Store and reached the step to open the application loader? !
I get this message to sorry
Astchertkm only because I know you from experience you possess in this area
Note Search Qooukl I did not find the solution
Thank you
e

Thank you for the answer to my question ..
I discovered something that might be important .. !
The application loader version 1.3, which possessed the modern version is 2.3.1!
How do I get the latest version of the program?
May be a solution to my problem which I consider this a serious problem!
Thank you

Problem with Application Loader

Hi,
I'm trying to submit an iPhone application to iTunes using the Application Loader on a Mac Mini (OSX 10.5.8). After I enter my iTunes Connect login details I receive the following error response
*There is a problem with you login information*
Please click back and try again
An error occurred talking to the iTunes Store
The login details are correct, the device connects to the itunesconnect web site from Safari without issue.
Is anybody else experiencing a similar issue? Anybody have any ideas on how I might resolve this issue. It's really frustrating as this is now the only way to get an App into iTunes and the error message is not exactly giving me a lot to go on.

I got a message in an email saying I had the wrong binary code and therefore had to change it by downloading the application manager.
This was the email they sent me?
Some potential reasons that your binary is invalid: the binary icon doesn't meet our requirements, the payload directory is set at the wrong level in the .app wrapper, the bundle version has not been increased, and so on.
You will receive an email detailing the reason for your invalid binary. To clear the error, log in to iTunes Connect, locate your app, and click Ready to Upload Binary to reset your app's status to Waiting For Upload. This will allow you to redeliver your corrected binary through Application Loader.
Makes no sense to me either!

Impossible to upload .ipa file with application loader

Ipa created with FB and AIR 4.0 SDK.
Both certifcate and provisionning profiles are valid distribution ones.
New icons sizes for IOS 7 implemented
Application loader returns :
Unable to authenticate the package: xxxxxxxxx.itmsp
Error ITMS-9000
Does anybody has an idea to solve this issue ?
Thks in advance for help
Best regards

Ipa created with FB and AIR 4.0 SDK.
Both certifcate and provisionning profiles are valid distribution ones.
New icons sizes for IOS 7 implemented
Application loader returns :
Unable to authenticate the package: xxxxxxxxx.itmsp
Error ITMS-9000
Does anybody has an idea to solve this issue ?
Thks in advance for help
Best regards

Uploading App with Application Loader Issue

Hi guys,
I wrote several apps while the restrictions were enforced for "fun" and we have now finished it for release. I am being thwarted by one particular issue, different from anything on the net so far (as far as 9 hours of searching goes).
When I go to use application loader to submit, i choose the .zip, it accepts, unzips validates codesign etc, then comes up with a
"this bundle is invalid. Apple is not current;y accepting appliactions built with this version of the SDK."
I have tried renewing all codesigning certificates, provisioning profiles etc, and nothing helps. Ive even tried changing the info.plist in the actual compiled binary to show that it has been compiled and built with a 4.0, 4.1 sdk. No luck.
This issue stands for all 3 applications I have written.
Any fixes/suggestions/ HELP???
Thanks
Scott

Hi
I have the same problem, we built the first app for our client through WoodWing, now we want to update the app with the Adobe one. During the upload of the new app, created with the Adobe Viewer Builder we get this error code:
This bundle is invalid. The key CFBundleShortVersionString in the Info.plist file must contain a higher version than that of the previously uploaded version.
When we open the Info.plist we can see that the Adobe Viewer Builder creates 1.0.1 for the Bundle Version String short, while the older WoodWing app has 2.1.
Marketing version in Viewer Builder = Bundle Version String Short or ?
That means everybody who is changing from the WoodWing to the Adobe reader needs to go through Adobe?

Critical error with data load

Hello Gurus,
I was trying to load data ffrom ODS to a Cube using DTP when I got the following error:
Exceptions in Substep: End Routine - RSBK231
The database returned a value containing an error
Do you know what this error message means. It refers to a end routine and I had no syntaxt errors with the endroutine. It also worked fine with previous data loads.
Any help in this regards is appreciated.
Thanks
Rishi

Hi Rishi,
There might be some syntactical error in your end routine e.g division by a zero. This is just an example. Try running the DTP in Debug mode (you will get the option under execute tab of DTP) and see what the end routine code is doing. There might be some exception which you need to take care of.
Thanks..
Shambhu

Error with SQL Loader 10g

Hi,
I use SQL Loader to load files into my database running on Suse Linux. The loader is invoked by a Java application.
In Oracle 9i my string would be something like
sqlldr DATA='opt/test information/sample.dat' PARFILE=/opt/test.par
It worked.
When I ran the same string in 10g I got an error like
" multiple values not allowed for parameter 'data' "
I tried escaping the ' with a \ , like
sqlldr DATA=\'opt/test information/sample.dat\' PARFILE=/opt/test.par
Now it gives me a different error
SQL*Loader-500: Unable to open file (opt/test information/302.DAT)
SQL*Loader-553: file not found
I cannot remove the space from the directory. It has to be "test information".
Can anybody help me out?
Thanks,
Karthik

or better yet, you are on Linux so you have the luxury of creating a symbolic link to that directory and make the sym link without spaces and then use that in your sqlldr command line.
you can keep the directory with spaces and have sqlldr run from the sym link.

CS6 deployment error with Application Manager Enterprise 3.1 Edition

Hello everyone,
I am currently trying to create a DesignWebPremium and Master Collection CS6 deployment package with AMEE 3.1 (Application Manager Enterprise Edition) on Windows 7 EE x64 without any luck.
I keep getting the following error log:
11/16/2012 06:35:51[INFO] AdobePackageBuilder - Build Version - 3.1.105.0
11/16/2012 06:35:51[INFO] AdobePackageBuilder - Logging Level verbosity Set to 4
11/16/2012 06:35:55 [INFO] AdobePackageBuilder - Successfully retrieved TargetName from OptionXML.
11/16/2012 06:35:57 [INFO] AdobePackageBuilder - Copied Setup file/folder (packages)
11/16/2012 06:35:59 [INFO] AdobePackageBuilder - Copied Setup file/folder (resources)
11/16/2012 06:35:59 [INFO] AdobePackageBuilder - Copied File (Set-up.exe)
11/16/2012 06:35:59 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.db)
11/16/2012 06:35:59 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.sig)
11/16/2012 06:35:59 [INFO] AdobePackageBuilder - Copying the content of 1 disk
11/16/2012 06:37:31 [ERROR] AdobePackageBuilder - Failed to create Setup.ini file for Acrobat Customized Wizard.
11/16/2012 06:37:32 [ERROR] AdobePackageBuilder - Failed to create the zip file.
11/16/2012 06:37:32 [ERROR] AdobePackageBuilder - Error zipping PkgConfig.xml.
so I thought I could be smart and just take out Acrobat from the install package, but still no luck:
11/15/2012 07:39:41[INFO] AdobePackageBuilder - Build Version - 3.1.105.0
11/15/2012 07:39:41[INFO] AdobePackageBuilder - Logging Level verbosity Set to 4
11/15/2012 07:39:46 [INFO] AdobePackageBuilder - Copied Setup file/folder (packages)
11/15/2012 07:39:48 [INFO] AdobePackageBuilder - Copied Setup file/folder (resources)
11/15/2012 07:39:48 [INFO] AdobePackageBuilder - Copied File (Set-up.exe)
11/15/2012 07:39:48 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.db)
11/15/2012 07:39:48 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.sig)
11/15/2012 07:39:48 [INFO] AdobePackageBuilder - Copying the content of 1 disk
11/15/2012 07:42:10 [ERROR] AdobePackageBuilder - Failed to create the zip file.
11/15/2012 07:42:10 [ERROR] AdobePackageBuilder - Error zipping PkgConfig.xml.
I have tried creating the deployment package as both 32-Bit, 64-Bit, including updates and not including them, running AMEE 3.1 with administrative access and without - it just doesn't work...
I'll be grateful for any constructive help.

Hi,
I just did come across this error today, and thought of sharing with the solution. This error is due to insufficient previlages of user, while he is trying to configure the hyperion Products. So all you have to do to solve this is, while you try to configure, right click on the configuration utility and run as administrator, and do the configuration as usual.This would solve this issue. I did not have this issue with Windows 2003 Server, but faced this while installing on Windows 2008 Server.
Thanks,
Leo Jose.

Help needed please -Master data loading- error with text loading.

Hi,
Iam S.Sushma. Iam getting error while loading master data from flat file- attributes and texts.
I have loaded attribute data successfully. But when iam monitoring the text data then iam getting following error.
""SET THE LANGUAGE FIELD IN THE SOURCE SYSTEM-LONG TEXT.""
""RECORD1: SRPID_1:DATA RECORD 1(EN S):DUPLICATE DATA RECORD.
"ERROR 4 IN UPDATE"
I took 2flat files for attributes and texts.
SRPID is key field.(sales representative id)
attributes:- SRPID, NAME1, AGE1, ADD1,PHONE1.
text:- SRPID,LANG,SHTXT,MDTXT,LGTXT.
Iam just a begginer so need your guidence. Thank you in advance.
Message was edited by: sushma sandepogu
Message was edited by: sushma sandepogu

Hi Eugene,
Thank you for your guidence. I have changed the order in flat file and got the results successfully. But when iam viewing the Master data text the S10 in coming in 2nd position in maintain master data-list screen i mean :-
SRPID LANG NAME AGE ADD PHONE SHTXT MDTXT LGTXT
S1 EN ABC 34 GDS 1234 AS ASD ASDDF
S10
S2
S3
S9.
Iam not understading why. Hope yu can help me. I have assigned full points to you for your previous solution.
Thank you in advance.
S.Sushma.

Error with Application panel in Dreamweaver CS3

Hello guys , i'm glad to join to the forum...
I've a problem:when i access to Application panel-Server
Behavours my Dreamweaver crashes.
I use Windows Vista Home Premium and i'm working with Apache,
MySQL and PHP (the last versions).
Please try to give me some advice

Thanks for the replies!
Although I still haven't found the real problem for it, the preview panel keeps on freezing, I do have a wokaround found for it.
Because I have a docking station for my laptop, with some free slots in it, I bought a second hand Video Card with 512MB and better performance than the on-board card in the laptop.
I hooked up a external LCD monitor to it and now it works just fine, with no additional modifications in Bridge.
So, although the Bridge / video card still occurs on the laptop, I don't mind working this way.
Maybe a newer driver in the future will solve this problem.
Kind regards,
Stefan

I cannot update ANY software. I get an error with / applications. How do I fix?

I am currently using Mac OS X v10.5.8 and cannot perform ANY software updates. Please help!

Because I don't want to through good money after bad. Up until this point the only apple produce I hadn't had issues with was my iMac and now after a few years it too has been added to the list. You will have to excuse me as I have several issues going on with multiple products at this time. I will try my best to keep them seperate.
Will Snow Leopard solve this problem or will I not be able to download it like everything else? Just this morning I had to get a new version of Adobe (which automatically uninstalls the current version) and was not able to install it.

Error with Application Loader

Similar Messages

Maybe you are looking for