Exit or Badi for controlling the change of user status in notification

Hi,
I want to check the current user status of notification while saving the notificaton. If the current user status satisifies particular situation, then the notification should be save else not.
Is there any user exit or Badi which can be used to control the change of user status in notification.
Thanks
SUMIT

Hi Pushpa,
Thanks for the reply.
the problem over here is that the BADi IQS0_STATUS_MAINTAIN only allows to disable the user status.
the other function module STATUS_READ only fetches the data from JEST.
whereas my problem is that i want to check on the changed status on the screen(which is not saved also).
Appreciate your reply on the same.
Thanks
SUMIT

Similar Messages

User Exit & BADI for controling the END user in co06

Hi
I HAVE SOME 2 DOUBTS
1. I need a user exit / BADI for controlling the user to edit a specific document type in co06 (BACKORDER PROCESSING) .
the control should be actve for specfic order type for specfic users
2 DEPENDS ON ORDER TYPE I NEED TO CONTROL THE ALLOCATION , AND HOW TO CHECK THE SAFETY STOCK

Answer cannot be Provided properly , so has to Post more questions . i am jus closing my ques??

User exit or badi for saving the data in mm01

Hi All,
I added one custom screen in mm01 using SPRO ,as well as i added 2 new fields in makt table using Append statement, now the problem is am not able to save the custom screen data in standard makt table can any one help me in this ,tell me which Badi or Exit is useful for this requirement.
Thanks,
Priyanka
Edited by: priyankanukala on Feb 21, 2012 7:55 AM
Edited by: priyankanukala on Feb 21, 2012 8:01 AM
Edited by: priyankanukala on Feb 21, 2012 8:04 AM

Hi
You don't need them. See Note 44410 - Integrating cust.-specific fields in matl master for further information, and copy the code for PAI event in your custom dynpro. You need something similar to this:
process after input.
*coding......
chain.
    field: mara-zzfield1,
           mara-zzfield2.
    module checks_on_zz on chain-request.
endchain.
* coding .......
I hope this helps you
Regards
Eduardo
Edited by: E_Hinojosa on Feb 21, 2012 9:26 AM

User Exit or BADI for catch the document number after saving the document

Hi ,
I am working on data conversion where Document number(BELNR),BKPF and BSEG data should
transfer to my Z table(Containes fileds of BKPF and BSEG) after SAVE the document related to
Tcodes F-01 , F-22 , F-28 , F-43 , FB01 , FB02, FB60 ) . It need to go through by any user-exit or
BADI.So Could you please suggest me any User exit or BADI ASAP.
Waiting for reply.
Thanks
Lakshmi

You should use BTE (Business transaction event). This concept is used especially for FI related enhancements...
Study this document to know how to use BTE
http://www.todoabap.com.ar/archives/FI%20Enhancement%20Technique%20-%20How-To-Guide%20on%20the%20Usage%20of%20Business%20Transaction%20Events%20(BTE).pdf
Let me know if you face any specific issues..

User exit or BADI for determining the output type inme21n orme22n

hi all,
i have used the user exit 'exit_sapmm06e_012', it is getting triggered in me22n, i am able to check whether the vendor email id is present or not, but this is happening all the time that is even when the user dont want to send a email to the vendor i.e. he just wants to print the purchase order, even at that time this user exit is getting triggered and giving a message that the vendor email id is not maintained.
the reson why this is happening is there is no import parameter to this user exit which gives the "medium of data transfer" the user has entered. if i get this parameter visible inside the user exit, then i can check this parameter inside the user exit and do the required operation. i checked up with all the user exits in "me" package and even the other related packages but none of them is getting triggered,
do antone know a user exit or badi which imports this parameter and also gets triggered at the time of creation of purchase order.
plz give me a solution.
regards,
santosh.

Hi Santosh,
Why not continue the other post ?
Anyway, i am not sure to understand your requirement.
Do you want to check that vendor email exist and issue a message only if email is not available ?
Kind regards,
Yann

EXIT/BADI for enhancing the output of the transaction S_ALR_87013532

Hi,
greetings to all!! I have a problem here guys-I need to find any exit or badi for enhancing the output of the tcode S_ALR_87013532.This tcode is used for seeing the planned/actual/variance of project cost.
In the output we have got 3 columns-total of years, previous years and 2009. Under each column we have Plan, Actual, Variance and VAR %. Our requirement is to show Functional Location(PRPS-TPLNR), Budget Number(TCN01-SWRT0), SBU (TCN01-SWRT1) and Region (TCN01-SWRT2) in each of the clolumns-you can also get the last 3 fields in PRPS table as USR00, USR01 and USR02.
Can anyone help please?could not find anything worthwhile on SDN. Thnx a lot !

Hi,
Check these User-Exits..
Exit name Short text
KAHFEX01 Selection data for commercial reporting in PS
KAP10001 PS: Hierarchy Reports for Projects
KAP60001 PS: Export Project Key Figures into R/3 EIS
Also check the BADI
WBS_USER_FIELDS_F4
Regards
Raghu
Edited by: Raghavendra Rao G on Sep 2, 2009 12:26 PM

User Exit or BADI for COR1/COR2

Dear Experts,
Can you please tell me if we have any user-exit or BADI for chaning the value of the technical completion date field
i.e. AUFK-IDAT2 while saving the Process Order in COR1 or COR2?
Thanks,
Praveen

Hi Praveen,
Implement the customer exit EXIT_SAPLCOKO_006 in enhancement
PPCO0020 Process order: Display/change order header data
This is only importing one field I_AUFNR.
but try the logic below.
data: lv_fnam type char16 value '(SAPLCOKO)caufvd'.
field-symbols : <fs_caufvd> type caufvd.
your checks for changing the field IDAT2 (Technical completion date).
Try to change <fs_caufvd>-IDAT2 field value.
Regards,
Dwarakanath.S

Exit or BADI for operation in PM

Hi All,
I am searching for a User Exit or BADI to get the changes made in operation tab of IW32.
so that if any changes found I can send a mail to respective person .
Thanks in Advance,
Abhaya

Hi ,
Please check the below BADI s, Hope they may be helpfull
WORKORDER_UPDATE
GOS_SRV_SELECT
INST_AUTHORITY_CHECK
IWO1_ORDER_BADI
WCM_DECOUPLING
IWO1_SCREEN_MODIFY
IWO1_WKCTR_CHANGE
Also check IWO10009 (at save user-exit) .
Thanks and Regards,
P.Bharadwaj

Need exit or Badi for updating Warranty data in IE02 while Prod Order conf.

Hi All,
I need a user exit or Badi for updating the Warranty data in IE02(Equipment Master) while production order confirmation(CO15)?
I need to update the Begin guarantee date from Production order and warranty master type in IE02 while confirming the production order.
Thanks,
Sudha

Hi,
Are you saying first create notification,then service order
and then Sales order.
But the requirement is create notification then sales order and when you go in va02 and while modifying the sales order and create service order.
Thanks & regards,
chetan.

User Exit Or Badi for Framework Release PO

Anyone could tell me about any user exit or BADI for storing the calculated value in Frameork order.
Since it is storing the GNETW in CEKKO and that is used in releasing procedure.
First of all i want to calculate the total price according to srat date and end date and then only for framework order put that value in CEKKO-KTWRT field.
Please Help and suggest some thing about this.
Thanks & Regards,
Nitin Malhotra

Hi,
Check the following PDF .
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9cd334f3-0a01-0010-d884-f56120039915
May be useful to you.
Regards
Sachin

User exit/BADI for tracing change of User Status in IW22

Hello,
I am looking for a user exit or BADI that triggers whenever ther's a change made to User status field.
eg. changing user status to APTC(Approved to be executed)
I then need the exit/badi to trigger my workflow to send mails to list of reviewers. I can handle that but I am not able to find the suitable exit.
I have seen BADI IQS0_STATUS_MAINTAIN, but no use.
Can anyone help?

Hi..
Transaction Code - IW22                     Change PM Notification
Enhancement/ Business Add-in            Description
Enhancement
IWO10026                                User check on setting status 'Do not perform'
IWO10027                                User exit: Generate user-defined settlement rule
IWOC0001                                Create PM/SM notification: Determine reference object
IWOC0002                                PM/SM notification: Check whether status change is allowed
IWOC0003                                PM/SM authorization check of ref. object and planner group
IWOC0004                                Change single-level list editing PM/QM/SM ALV settings
Business Add-in
WOC_FL_DETERMINE                        Determine Date for Determining Installation Loc. Equi.
NOTIF_AUTHORITY_01                      Additional Authorization Checks for the Notification
IWOC_OBJECTINFO_CHNG                    Changes to Data of Object Info Screen
IWOC_LIST_TUNING                        Performance Tuning for Lists in PM/CS
IWO1_SUBSCREEN_0170                     Display Additional Data on Object Screen 0170 PhysicalSample
IQS_MASS_CHANGE                         BadI for Mass Changes to Notifications
IQS0_STATUS_MAINTAIN                    Control of Changeability of User Status
No.of Exits:          6
No.of BADis:          7
Arunima

User Exits or BAdis' for the Service Order create Transaction

Hi all,
 I need to Replace a field, "Product" in the "Item Details" area of the create Service Order Transaction(CRMD_BUS2000116) with some custom field.
Are there any Exits/BAdi which will help me in doing this..
Thanks in advance
Sethu

Hi Sethu,
The user exits / BADI's for the Transaction(CRMD_BUS2000116 are not avaliable:
The following info from one forum to search user exits / BADI's that you can use: There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.
Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
Also have a look at below report which will list BADIs.
REPORT Z_FIND_USER_EXITS.
TABLES : TSTC,TADIR,MODSAPT,MODACT,TRDIR,TFDIR,ENLFDIR,SXS_ATTRT ,TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
 P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
 SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
 TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
 SELECT SINGLE * FROM TADIR
 WHERE PGMID = 'R3TR'
 AND OBJECT = 'PROG'
 AND OBJ_NAME = TSTC-PGMNA.
 MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
 IF SY-SUBRC NE 0.
 SELECT SINGLE * FROM TRDIR
 WHERE NAME = TSTC-PGMNA.
 IF TRDIR-SUBC EQ 'F'.
 SELECT SINGLE * FROM TFDIR
 WHERE PNAME = TSTC-PGMNA.
 SELECT SINGLE * FROM ENLFDIR
 WHERE FUNCNAME = TFDIR-FUNCNAME.
 SELECT SINGLE * FROM TADIR
 WHERE PGMID = 'R3TR'
 AND OBJECT = 'FUGR'
 AND OBJ_NAME EQ ENLFDIR-AREA.
 MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
 ENDIF.
 ENDIF.
 SELECT * FROM TADIR INTO TABLE JTAB
 WHERE PGMID = 'R3TR'
 AND OBJECT in ('SMOD', 'SXSD')
 AND DEVCLASS = V_DEVCLASS.
 SELECT SINGLE * FROM TSTCT
 WHERE SPRSL EQ SY-LANGU
 AND TCODE EQ P_TCODE.
 FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
 WRITE:/(19) 'Transaction Code - ',
 20(20) P_TCODE,
 45(50) TSTCT-TTEXT.
 SKIP.
 IF NOT JTAB[] IS INITIAL.
 WRITE:/(105) SY-ULINE.
 FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
 sort jtab by OBJECT.
 data : wf_txt(60) type c,
 wf_smod type i ,
 wf_badi type i ,
 wf_object2(30) type C.
 clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
 LOOP AT JTAB into wa_tadir.
 at first.
 FORMAT COLOR COL_HEADING INTENSIFIED ON.
 WRITE:/1 SY-VLINE,
 2 'Enhancement/ Business Add-in',
 41 SY-VLINE ,
 42 'Description',
 105 SY-VLINE.
 WRITE:/(105) SY-ULINE.
 endat.
 clear wf_txt.
 at new object.
 if wa_tadir-object = 'SMOD'.
 wf_object2 = 'Enhancement' .
 elseif wa_tadir-object = 'SXSD'.
 wf_object2 = ' Business Add-in'.
 endif.
 FORMAT COLOR COL_GROUP INTENSIFIED ON.
 WRITE:/1 SY-VLINE,
 2 wf_object2,
 105 SY-VLINE.
 endat.
 case wa_tadir-object.
 when 'SMOD'.
 wf_smod = wf_smod + 1.
 SELECT SINGLE MODTEXT into wf_txt
 FROM MODSAPT
 WHERE SPRSL = SY-LANGU
 AND NAME = wa_tadir-OBJ_NAME.
 FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
 when 'SXSD'.
For BADis
 wf_badi = wf_badi + 1 .
 select single TEXT into wf_txt
 from SXS_ATTRT
 where sprsl = sy-langu
 and EXIT_NAME = wa_tadir-OBJ_NAME.
 FORMAT COLOR COL_NORMAL INTENSIFIED ON.
 endcase.
 WRITE:/1 SY-VLINE,
 2 wa_tadir-OBJ_NAME hotspot on,
 41 SY-VLINE ,
 42 wf_txt,
 105 SY-VLINE.
 AT END OF object.
 write : /(105) sy-ULINE.
 ENDAT.
 ENDLOOP.
 WRITE:/(105) SY-ULINE.
 SKIP.
 FORMAT COLOR COL_TOTAL INTENSIFIED ON.
 WRITE:/ 'No.of Exits:' , wf_smod.
 WRITE:/ 'No.of BADis:' , wf_badi.
 ELSE.
 FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
 WRITE:/(105) 'No userexits or BADis exist'.
 ENDIF.
ELSE.
 FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
 WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
 when 'SMOD'.
 SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
 CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
 when 'SXSD'.
 SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
 CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Hope it will help you.
Regards,
Arjun
Reward points if it helps

User exit or a badi for checking the vendor email id in me22n on me29n

hi all,
can anybody suggest me a user exit or a badi for checking the email id of the vendor in me21n or me22n or me29n.
i.e. a user exit or a BADI which gets hit either at the time of creation or release of a purchase order.
plz suggest me a solution its urgent.
regards,
santosh

Hi Santosh,
Have you looked BADI ME_PROCESS_PO_CUST or user exits EXIT_SAPMM06E_016 / EXIT_SAPMM06E_017?
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

User exit or BADI for standard change Log ?

Is there user exit or BADI for standard change log update ?
I want to update a customer fields into standard change log table.
Could someone tell me about it?

Could anbody tell me ?

Exit or routine or BADI for save the sales order

Exit or routine or BADI for save the sales order.
Please give your input Asap.
Thanks & regards,
Vinayak More.

Hi Vinayak,
please go through the steps and u will be able to find BADI of any transaction.
&*************Reward point if helpful**************&
BADI Info:
Method 1:
Go to Tranaction: SE24.
open class CL_EXITHANDLER
Open the method " GetInstance"
Put Break point in the statement
call method cl_exithandler=>get_class_name_by_interface
Now execute the Transaction which you need teh BDC it will automatically stops at the the method. In debugging mode double click on the variable: " exit_name" It will return the BADI Name.
Method 2:
find the Package name and go to the tranaction SE84.
Enter the package name
inside the left navaigaiton panel there is one option " Enhancements" click on this enhancement and then enter the package name and execute it. you will get hte number of enhancement.

Exit or Badi for controlling the change of user status in notification

Similar Messages

Maybe you are looking for