Fireworks will not run

I installed and registered my copy of Fireworks CS4 and used
the application on my Windows Vista Home Premium.
I had some problems with the system crashing (not sure what
caused the problems). Had to restore the system to a previous
System Restore point. Now the application will not run - the splash
screen opens and it gets to loading textures and then
closes...further attempts to run show the Yellow screen for only a
fraction of a second before closing.
Have tried running in compatiblity mode and as an
Administrator but no difference. Tried to re-install over the
existing version but did not make any difference. Have not
uninstalled as there was a warning the license had to be turned off
before uninstalling but of course this can not be done as I can not
run the application.
Any ideas on how to resolve...getting frustrated!
Allan

allan_vi wrote:
> Any ideas on how to resolve...getting frustrated!
This is a user to user forum, Allan. Contact Adobe technical
support!
Linda Rathgeber - Adobe Community Expert
http://www.adobe.com/communities/experts/members/8.html

Similar Messages

Dreamweaver and Fireworks will not run

when starting mx 2004 dreamweaver or fireworks, and immediate
error message pops up: ERRO: Write File() The handle is invalid.
the application failed to initialize properly (0xc0000142) Click ok
to terminate application.
flash works fine even after re-installing.
tried downloading dreamweaver 8 trial from adobe site, worked
fine go figure.
have tried re-installing applications with all start up items
disabled and in safe mode,
have checked hard drive for errors - none
run sfc /scannow - no messages
replaced cmd.exe in c:\windows\system32 - no effect
sounds like a security issue or file that is damaged.
any help or direction on this problem would be greatly
appreciated.
mark
[email protected]

On Thu, 28 Sep 2006 14:24:14 +0000 (UTC), "trickstar13"
<[email protected]> wrote:
>when starting mx 2004 dreamweaver or fireworks, and
immediate error message
>pops up: ERRO: Write File() The handle is invalid. the
application failed to
>initialize properly (0xc0000142) Click ok to terminate
application.
>
> flash works fine even after re-installing.
>
> tried downloading dreamweaver 8 trial from adobe site,
worked fine go figure.
>
> have tried re-installing applications with all start up
items disabled and in
>safe mode,
> have checked hard drive for errors - none
> run sfc /scannow - no messages
> replaced cmd.exe in c:\windows\system32 - no effect
>
> sounds like a security issue or file that is damaged.
>
> any help or direction on this problem would be greatly
appreciated.
>
> mark
> [email protected]
The only thing I can think of, which is a wild guess, is
this:
Software installations usually tell us to close other
programs and if
you are like me, you ignore that. I've seen a few computers
that, when
you tried to spell check in Word, had out of memory errors.
On at
least one of these machines, the problem was solved by
reinstalling
with all other apps closed and on at least one other one,
problem
solved by installing in Safe Mode.

I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I did it again. Now it will not run and I get an error message saying that firefox is running and you can only run one at a time. I can't figure out what is running.

Because of a problem, I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I uninstalled/reinstalled it again. Now it will not run. I get an error message saying that firefox is running and you can only run one at a time. I have uninstalled multiple times and can't figure out what is running. The is only one Firefox installed and it is not open. What does this mean and how do I fix it?

If you use ZoneAlarm Extreme Security then try to disable Virtualization.
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
See also:
*[[/questions/880050]]

Downloaded safari 6.0.4 but it will not run on 10.6.8 on

I downloaded safair 6.0.4 to a macbook running 10.6.8 but Safari will not run the new verstion, only the 5.9.1??

For 10.6.8 you need Safari 5.1.10.
Ideally, you'd now install a system backup made before you got 6.0.4 on there... if that's not possible, download Safari 5.1.10 for Snow Leopard & use Pacifist to 'force' the install, then restart. Backup first, if you haven't already.

Firefox will not run after System restore or running in compatibility mode for windows 98. How do I fix this? I already tried all other solutions on this site.

I was running Firefox fine just yesterday. I screwed up the registry a litle while removing an installed program completely, so I restored the system and everything appeared to work fine. I then decided to play an old video game, Return to Krondor, which was made back in 1998, so I ran the program with no other programs running in compatibility for windows 98. After finishing the game, I closed it and put the computer in hibernation mode. I come back today and firefox will not run at all. It is not running in the background and there are no programs running. There are no services running which could interfere with it. I think somehow Firefox may think I'm in compatibility mode still, but I have no idea.
I'm running windows Vista 32 - bit with an AMD 2.4ghz processor, 4gb ram on an Emachine computer. I have already tried system restore, restart, processes etc. Nothing works. I can still run Internet explorer and all other programs.

The person that I was assisting, has Windows 7 which has 64 bit system. Her browser was IE 10.
Was IE11 ever offered (or installed) via Windows Update?
Is her computer currently fully-patched at Windows Update?
Is Adobe Shockwave Player v12.1 (or higher) installed on her computer?
Is Adobe Flash Player v15.0.0.189 (or higher) installed on her computer?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Troubleshoot Shockwave Player installation for Windows
http://kb2.adobe.com/cps/403/kb403264.html
You will find support for Shockwave Player in this forum:
http://forums.adobe.com/community/webplayers/webplayers_shockwave
~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

Office 2013 applications will not run as a domain users

I have a windows 7 64-bit pc with 2013 office home and and business installed. When trying to access Office as a domain user the programs will not run. Is there a fix for this other than making the users local admins?

Hi,
Which version of Office 2013 did you deployed, Windows Installer-based version or the Click-to-Run version?
Did you install the Office product with local administrator account? I notice that the users must be local administrators on their computers to install Office:
http://technet.microsoft.com/en-us/library/ee624360.aspx
If we add the local admin right to the user, can the Office programs be launched? If so, repair the Office programs and then remove the local admin right. See if it can work.
Best regards,
Rex Zhang
TechNet Community Support

I recently purchased the iPhone 5 and my itunes account on my iMac 7,1 will not recognize it as a device. My imac has stopped downloading new updates, it says it is up to date with iTunes 9.2.1. My imac will not run the newest 10.7 itunes either. HELP!!

I recently purchased the iPhone 5 and my itunes account on my iMac 7,1 will not recognize it as a device. My imac has stopped downloading new updates, it says it is up to date with iTunes 9.2.1. My imac will not run the newest 10.7 itunes either. All I want to do is put my music from itunes on my computer to my new phone. HELP please!!

i called apple and they are sending me snow leopard so i should, *fingers crossed, be able to run the newer version of itunes. we'll find out for sure in a few days when it arrives

ITunes 10 will not run on Windows 7, 64 bit

I have upgraded to itunes 10 and now it will not run. In task manager the process is running but no programme. i uninstalled all itunes, quick step, bonjour and apple folders. Then tried a clean instal of itunes 10. Still didn't work. Uninstalled again and reloaded v 9.2 and it works. Tried disabling bonjour and ran the instal of 10 again and it still doesn't work. This is becoming a major pain as I am stuck on v9.2.

Try installing the version 10 again so we can check on a few other characteristics of the problem, seeoh.
(1) Does your QuickTime Player launch, or do you get an error message of some kind when you try to launch that?
(2) Try (by way of experiment) disabling the BonJour Service.
In your Start Menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Maximise the window to better see what's going on.)
Right-click the BonJour Service and select "Properties". In the "General" tab, set Start-up type to "Disabled".
Restart the PC, and try launching iTunes again. Does it launch this time?

HT1925 After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll can't be found, APSDaemon.exe not running". Windows 7.

After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run. itunes will not now run.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7.

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

Windows 8.1 will not run my install CD for Photoshop 5.0. What can I do ?

Windows 8.1 will not run my install CD for Photoshop 5.0. What can I do ?

i'm not sure your expectations are realistic. ps 5 was designed for win95.
you can't fault adobe for failing to design ps 5 so it would be compatibile with an os that wasn't in existance when ps 5 was released.
to be sure, adobe did not warrant their software would work with all future operating systems. and no other software company can or does make such a claim.

BB Desktop Software 6.1 will not run on Windows 7 64-Bit

I wrote to the forum of my problem, and a nice person here told me that I may be having the same problem as others and to repost my question to this link
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/BB-Desktop-Software-6-1-will-not-run-...
I went there and cannot find a button to tick to post to that page, so I went one back and posted my problem in hopes of finding help. BB4matt even told me what my laptop is. A Genuine Windows 7 home Premium 64 bit Operating System, and that Desktop 6.1 will not run on this system, to copy my problen to the above link, (which I couldn't figure out how to do) or start a new one under the heading I used, that I MIGHT attract a guru of sorts, BB Tech Advisor, ViciousFerret. MR FERRET, please help!
Thank you all so much in advance once again! (Below is my original plea for help.)
P
Hi.
I have read in these forums and am still lost. I know my answer should be in hre somewhere, but if it is I am unable to understand it, so be patient as I may be reasking an already answered question.
I try to be a good lil girl and follow forum rules, but am lost here.
I bought a new laptop, a Dell 17R It runs Win 7 I think. Lots of ROM/RAM. I dowloaded the desktop program from bb dot com and cannot get it to work. First it asked me to trouble shoot, and reconfigured the DT prog for Win XP.
It then acknowledged my Torch and dld my photos. Then it decided I didn't have space and undid whatever it did.
NOW I cannot get the program, once it opens to recognise my phone at all! ACK!!
I need someone who understands this gobbltygook to explain to me what to do. I need to unload my photos, as I use my phone to take pix more than I would have thought.
I am a photog, and it's better than my first digital this Torch 9800 is, and video quality, OMG, but the vids are too big to upload from the phone..........(IDK why cuz it did at Christmas?)
Anyway, please help me here, as I can use a computer, e-mail, Facebook, Picassa, other than that, IDK too much about them. (It took my YEARS to spring for this laptop)
Thank you in advance for your patience.
P

I have the same issue. It gets to a desktop manager picture and just freezes.

Firefox 4.0 will not find update to 4.0.1, add-ons for 4.0.1 will not run

30 May 2011, 18:22h UTC
Downloaded 4.0 UK-edition on my laptop, the 4.0 US-edition on my desktop, and the 4.0 UK-edition on a 2nd laptop.
On mine, updates to 4.0.1 are not found, some add-ons were taken off, as incompatible, that ran on the 4.0 on my desktop (and weren't on the 2nd laptop). Add-ons, now already even compatible with 4.0.1 (running on the 2nd laptop) will not run as 'incompatible' with 4.0 (though listed on the add-ons site as compatible.
It has stopped telling me that 'something' is pretending to be an update from Firefox (whatever that 'something' be?) since setting the browser to updating manually, but asking me first what to do. All currently installed add-ons have not asked me for some time (though on other computers), and also report as fully up-t0-date.
Ergo: Neither Firefox 4.0 nor any installed add-ons update correctly.
Didn't crash, though it 'likes' doing that after printing (always Badly! with dreadful printing options/previews), leaving two tabs (rather than the one before), both of which only can be shut from their context menus. Crash reports have been sent with same email address, but not been answered. This browser has all the qualities of a Beta-release and needs some serious overhauls (it's also not very new or much safer!).
Example for an add-on that won't install on 4.0, but will under 4.0.1: CookieMonster - which is desperately needed, given your browser still suffers from minimal, insufficient cookie management, incl. lists of domains that wish to set 'another' cookie when no cookies are as yet, allegedly, sitting on the computer.

I've since updated manually to 4.0.1, but haven't yet tried the full uninstall version, because I have to export plenty of settings first (and/or manually copy them). Also means I'd have to start from scratch with many customizations in No Script.
That said, I'll try the 'Safe Mode' option tonight, thank you :-)!
If I have to uninstall the whole shebang, I'd be more tempted to go back to 3.6.x until a few more of 4's teething problems (e.g. the messy print dialogues, particularly preview, which regularly doesn't even work) have been tackled.
Thanks-1M! for now - keep you posted.

I was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

i was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

I can't say personally since I never used AW, but see if these articles help:
http://www.macworld.com/article/1166370/open_old_docs.html
http://www.cultofmac.com/248546/convert-system-os-9-appleworks-6-files-to-os-x-p ages-files-os-x-tips/
I suggest that you clone your current drive with 10.6.8 to an external drive. If you have any issues after upgrading to Mavericks, you can boot back into 10.6.8.
Both of these applications can be used to create a clone. If you need help creating your clone, let us know.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html

It will not run on Mac OSX 10.5.8, on a G% dual 2.0ghz, now my older version of Firefox is gone...

I downloaded Firefox 4.0 and It will not run on Mac OSX 10.5.8, on a Mac G5 dual 2.0ghz. Now my older version of Firefox is gone...Why won't it work, the download page says it is for OSX and does not say it will not work on any particular OSX. Can your clarify. And can I get the old Firefox 3 back or should I continue using Safari....?

Yes I've read every one of them, none of them provide solutions whatsoever, I have spent about ten hours on this site in the past two days to no avail, none of the "resolved" threads provided any sort of solution for me, I have tried everything suggested on this website so far, multiple times, to no avail.

Fireworks will not run

Similar Messages

Maybe you are looking for