How do i use multiple threads( very much real time), using JavaFX?

I'm creating an application, using JavaFX because one can create awesome GUI using JavaFX. I need to know how to create real time multiple threads using javafx.
JavaFX doesn't support creation of multiple threads, but i think there is another way of doing it. I need it work in real time as my application works with an hardware (wacom intous 3 tablet), and i need mutiple threads to get all the parameters from the stylus of the tablet simultaneously...
any code which will help me out or explaination on how to go about this is appreciated...
Help required quickly...

See example at
[http://jfxstudio.wordpress.com/2009/06/09/asynchronous-operations-in-javafx/|http://jfxstudio.wordpress.com/2009/06/09/asynchronous-operations-in-javafx/]

Similar Messages

  • How can I call multiple records(40) at same time as webservice ?

    Hi All
      My scenario is some thing like calling SOAP(Webservice) to Rfc(BAPI)
      Thing is how can i call multiple records at the same time using the SOAP
       adapter i.e i need to make a request to BAPI and in the BAPI response
       based on the fields, i need to send to different records....it is Sync call
    Can any explain me how to implement this scenario ?
    Regards
    Kiran lvs

    HI,
    Please see the below link
    http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/content.htm
    Regards
    Chilla..

  • In Elements 7.0, how can I delete multiple photos at the same time?

    In Adobe Photoshop Elements 7.0, how can I delete multiple photos at the same time?   Please be a little specific so I can follow your instructions as I'm not real smart at computers; I'm an intermediate user.  Thank you.

    Shift-click the photos or Ctrl-click them to select them, then right-click one of them and choose Delete from Catalog. They will all go together.

  • How do you remove multiple email messages at one time

    I have a iphone 4 and today it started piling up over 4000 undeliverable messages for no apparent reason. I somehow managed to stop the process but I am left with over 4000 messages that I need to delete. How do you remove multiple email messages at one time. I can "mark" all the messages at once but I cannot find the move or delete button to trash the messages. Can some one help me out.
    Thanking you in advance.
    PL

    Just figured it out - I can select multiple messages as you suggested when I am not in full screen mode.
    So once I come out of full screen mode - then the multiple windows open.
    QED

  • How do i uncheck multiple songs at the same time in my library?

    how do i uncheck multiple songs at the same time in my library?

    THANKS.
    i just figured out that u can highlight them then right click and the option is there

  • How do I delete multiple emails at the same time rather than individually?

    How do I delete multiple emails at the same time rather than individually?

    My mistake
    I was looking at my KB, even tested my suggestion with the command key, and then wrote option
    Barry

  • How do i run two threads with different sleep times?

    How do i run two threads with different sleep times?
    Ive got thread A and thread B, they both update a jpanel.
    They both start when i press the start button.
    However thread A updates every 250ms and thread B updates every 1000ms. i cant just run them both at 250ms becuase this will mess it up.
    So for every four runs of thread A i want thread b to only be run once
    Does anyone know how to do this?
    Thanks, Ant...

    ok, ive done it but now i cant stop it!
    ive added buttons to start and stop, the start button works but the stop button doesnt. why doesnt "t.stop();" work?
        public void run() {
            while(t == Thread.currentThread()) {
                System.out.println("No " + t.getName());
                if (t.getName().equals("1")){
                    try {
                        t.sleep(1000); // in milliseconds
                    } catch (InterruptedException e) {}
                } else{
                    try {
                        t.sleep(250); // in milliseconds
                    } catch (InterruptedException e) {}
        }

  • How can I boot my PXI controller into real-time without a floppy disk?

    My PXI controller is in a lab which has intense magnetic fields that could corrupt the floppy disk used to boot the PXI controller into the LabVIEW Real-Time (RT) Operating System. How can I boot the PXI controller into real-time directly from the hard drive?

    If you are using LabVIEW 5.1.2 Real-Time (RT), launch Remote System Explorer and select Disks >> Create Format Hard Drive Disk. If you have LabVIEW 6 RT, launch the Measurement and Automation Explorer (MAX) and select Tools >> RT PXI Disk Utilities >> Create Format Hard Drive Disk (LabVIEW RT 6 has not be released yet). Once you have created the disk, boot the PXI controller with the Format Hard Drive Disk, and this will format the PXI's hard drive and install the real-time OS boot loader. Now you can reboot the PXI without a floppy disk and configure the PXI using Remote System Explorer or MAX. Be aware that this will remove all information from the hard drive, including other operating systems.

  • AE CS6: How to Ram preview or playback in smooth real-time everytime?

    Hi guys,
    I would  like to know how to Ram preview or playback in smooth real-time everytime? I'm using a videohive template and adding in my footages to the media holder comps. The AE template is complex I guess.
    Hee's the problem, everytime I make a change to text, add a footage replacement or make any change at all, I have to completely render and wait a long time to see my final product in "Real-time"/smooth. Is there someway that I can render out the whole thing once and even though I make a change the entire video will play smoothly without rendering time? 
    PC Specs:
    HP 510t
    Windows 8 Pro x64 bit
    16GB Ram
    i7 2600 CPU @3.4 GHz
    GTX 660Ti

    Proxies don't affect rendering beyond the point of reducing the resolution and thus the nuimer of pixels that need to be processed, but since the retain the effect properties at full resolution, e.g. a large blur still renders just as slow. They are more a means of reducing file I/O bandwidth while working really.... As I said, the best way to optimize this would probably be to restructure the project so parts that don't change reside in separate pre-compositions and can use the disk cache.
    Mylenium

  • How do you delete multiple e mail at one time

    How do you delete multiple emails at one time?

    The link works OK for me on my iMac running Safari and Tiger 10.4.11. It also works on my iPad running Mercury and iCab.
    You may be right about the trick no longer working. I have only used it once or twice and that was just as an experiment. I will quit posting the link now if it no longer works.
    This no longer works?????
    From Destef_12
    You actually can:
    it took me weeks of research to figure out finally how to decode this yet another secretive secrets of apple. there is a perfect way of deleting ALL emails at once without jailbreaking your iphone or ipad...and here it is:
    Open Inbox>>EDIT >> check/select the top message, it will highlight the move button >>press and hold the move button and uncheck the message that you had checked earlier >> lift all your fingers off from the ipad screen and leave it alone. wait until all your messages pile up on the right hand portion of the screen (in ipad). iphone will give you the actual number of emails it has selected for the action. now they are just waiting for your command to be moved ALL at once. >> choose trash to delete all of them or any other folder where u want to move them, like one piece. remember this will replicate your action on the server so u will ACTUALLY move them or delete them on the server and not just the ipad.
    once you have moved all messages to trash you can either leave them there for the scheduled cleaning or empty it right away by doing this: go to trash folder and click edit. the delete all button shows up at the bottom of the screen. hit it! you r done!
    if you do not see effects of your actions on the server make sure you have enabled Your email accounts for such actions.
    tips:
    1. please give enough time (could take upto several minutes depending the number of emails to be moved) for the emails to be selected for the move. your screen will become unresponsive while all emails are being packaged. once emails are ready, in ipad, you will see them zoomed out on the right hand side of the screen, and in iphone you will see the message showing you the actual number of messages that have been selected.
    2. avoid purging very large number of emails, the mail app might freeze or crash. if your inbox has thousands of emails change your sync settings in mail settings to fill lesser number of emails in you inbox
    Message was edited by: Demo

  • How do you rename multiple files at the same time

    how do you rename multiple photo files with a name at the same time?

    This would be an excellent use of Automator. Here is a link to some instructions on how to do this using Automator.
    http://www.youtube.com/watch?v=Ie6zGxo2D-o
    If you don't like that then Google "Renmame multiple files Automator" and you will find many tutorials available.

  • How do I delete multiple documents at the same time

    How do I delete several or multiple documents at the same time.  Do I have to delete each one individully?

    You can select multiple adjacent files or folders by clicking on the first one then shift-click on the last one.  Multiple non-adjacent files or folders can be selected one at a time by command clicking on each one.  Click on any selected file or folder then drag/drop to trash.

  • How can I extract the data from a Real-time Execution Trace ".log" file?

    I would like to get the data for the traces from the Real-time Execution Trace toolkit ".log" file to read in Excel and generate a report.

    Hi Chuck,
    Have you tried reading it into a text or binary file first and then generating a report using the Report Generation VIs?
    Ipshita C.
    National Instruments
    Applications Engineer

  • How can I change a Mixer filter in real-time? (11.5)

    Hi all,
    I'm currently coding (or trying to code) an interactive soundboard that users can play with in their software. They can turn inputs on and off, increase the volume, change the EQ, etc. The nice is, and I was really pleased to discover this, Director already has a feature called an 'Audio Mixer' that has filters to satisfy all these functionalities! The bad thing, I can't figure out how to change these filters in real time.
    For example, here's the code to MUTE a specific mixer (activated when the user toggles a button):
    member("channelOneMix").mute()
    But how do I tell it go INTO that mixer, find the existing High Pass Filter, and change the value of that High Pass Filter's 'highCutOffFreq' property? It's a classic case of knowing exactly what I need to tell the code to do, but I have no idea of the SYNTAX of actually telling it to do that.
    I hate to be 'that guy', but it is somewhat urgent. This is for a college assignment due Wednesday (yikes!). I didn't quite know what I was getting myself into with this code, but the end is in sight if I can figure out how to write this particular code.
    Many gratuitous thanks in advance for any assistance!
    PS: It won't be enough to simply add a new filter to the list. The user needs to be able to turn a dial up or down to increase or decrease the High Pass Filter, in conjunction with several other dials manipulating other filters. I need to be able to actually change what the filter's value is.

    Thanks for your help!
    The problem is that I think that I changed the "default" name for the state where the photos were taken. I have 50 differents locations, that are all correct, and photo per photo, I can modify the original location, but only at "local" level.
    How can I change the name displayed in State section as "Casa David i Mireia" for "Catalunya" that is the real name for the State where the photos where taken?
    I don't if this post is comprehensive. I'm not sure.
    Thanks for your time!
    Jordi

  • How to create RT boot disk for labview real time target

    Hi All
    I want to use desktop PC as real time target and for this i have to boot this desktop using RT operating system. I tried to use RT disk utilities in TOOLS menu in MAX but at the end it says no disk found in A drive or B drive since i do not have flopy drive in my laptop. I can not make a PC utility USB drive also since this option is not highlighted in the options hence i can not select it. Is there a way to create this RT operating system on a CD drive or can i download this operating system from somewhere so that i can boot desktop PC as real time target. Thak you for your help.
    Chauhan

    Hello,
    Well... you have a problem. : )
    The easy solution that i can remember it's.... Buy a usb floppy disk.
    Sorry, but it's the only think that i can remember.
    Software developer
    www.mcm-electronics.com
    PS: Don't forget to rate a good anwser ; )
    Currently using Labview 2011
    PORTUGAL

Maybe you are looking for