How to set screen field in ME_PROCESS_PO_CUST?

Dear all,
I need to set this field 'MEPO1317-MWSKZ' to display only by some criteria. I want to know HOW to do it in ME_PROCESS_PO_CUST
Thanks for your kindly helpful.

Hi Esaki,
1) Define new field selection in configuration "Define screen layout at Document level"
2) write code in fieldselection_item_refkeys as follow
get item data
if your condition
ch_key0 = new field selection
endif
Hope it can help u.
Grace

Similar Messages

How to set the field non-editable in the classical report..

Hi..
How to set the field non-editable in the classical report..

Hi experts,
For the component 'ICCMP_EMP_SRCH' there is a view 'BUPAEMPSEARCH' , which has 2 context nodes 'CUSTOMER' AND 'SEARCHEMPLOYEE' , i need to add the field 'NICKNAME' which is part of the 'CUSTOMER' context node on the search screen. Currrently all the fields on the screen screen are from the 'SEARCHEMPLOYEE' context node. when i did the configuration , the 'NICKNAME' field is greyed out . I have already generated the Getter ,Setter , GET_I, GET_M methods for the 'NICKNAME' field and the context node and controller class and context class are all active .
on debugging the GET_I method, i see that rv_disabled = 'TRUE' and the current = collection_wrapper->get_current( ) is returning empty value .
for this rv_disabled to be set false , the code below is not triggered since there is no value in current.
IF current->is_property_readonly(
'NICKNAME' ) = abap_false. "#EC NOTEXT
rv_disabled = 'FALSE'.
ENDIF.
when i check for other search fields of context node 'SEARCHEMPLOYEE' , all the fields are set to rv_disabled = 'FALSE'.
can anyone suggest how to approch this. iam i missing any binding between context nodes or any activations ?
The field properties are set as Input field and the display checkbox is not checked.

How to set key fields in a Database view

Hi guru's
iam balaji,plz guide me with how to set key fields in a view.......that field is a non key field in the base table....
thanks in advance,
Balaji.S

take a look at this:
Diagnosis
    In the view, not all of the mandatory fields were included as key
    fields. The key of the view therefore is not unique.
System Response
    All the fields are regarded as key fields in order to guarantee that th
    key lengths are unique.
Procedure
    For views with a large number of fields, this could have a negative
    effect on the performance for the language construction described below
    In this case, all the mandatory key fields should be included in the
    view.
regards

How to set Character field's Format Mask?

dear all,
how to set Character field's Format Mask?
i searched the forum and found the following, where can i use this code and how to change and set its format mask.
SRW.SET_FORMAT_MASK('mask');
Thanks
Muhammad Nadeem

Nadeem,
If you have database 10g, look into function REGEXP_REPLACE. Otherwise you can also try this (you might already know).
SELECT SUBSTR('CHHOCMIPO07020001', 1,2)||'-'||SUBSTR('CHHOCMIPO07020001' ,3,2)||'-'||
SUBSTR('CHHOCMIPO07020001' , 5,2)||'-'||SUBSTR('CHHOCMIPO07020001' , 7,3)||'-'||
SUBSTR('CHHOCMIPO07020001' , 10,2)||'-'||SUBSTR('CHHOCMIPO07020001' , 12,2)||'-'||
SUBSTR('CHHOCMIPO07020001' , 14,4)
FROM dual
CH-HO-CM-IPO-07-02-0001
If you have to use this at many places, create a function, pass the raw value, manipulate the string and return.
FS

How to set the field SKB1-FDLEV as requestred-entry in G/L Master data?

Hi All,
Could anyone tell me how to set the field SKB1-FDLEV as requestred-entry in G/L Master data?
Thanks
Gandalf

hi
Go to OB26
select Your criteria ( create, change or display)
double click on it
again double click on Bank/financial details
there you will find the Planning level make it require entry
save
with regards
ramanuja chary

How ti disable screen fields in Module pool

hi
How to change screen fields to DISPLAY MODE aftr clicking on a particular pushbutton in Module pool prg .
regards
chetan
Edited by: chetan teli on Jul 29, 2008 1:04 PM

hiiii
use following code for disabling field
IF p_rad2 IS INITIAL .
    LOOP AT SCREEN.
      IF screen-name CS 'p_docno'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.                           " IF screen-name CS 'p_docno'.
    ENDLOOP.                           " LOOP AT SCREEN.
ELSE.
    LOOP AT SCREEN .
      IF screen-name CS 'p_docno'.
        screen-active = 1.
        screen-input = 1.
        MODIFY SCREEN.
      ENDIF.                           " IF screen-name CS 'p_docno'.
    ENDLOOP.                           " LOOP AT SCREEN .
ENDIF.                               " IF p_rad2 IS INITIAL .
regards
twinkal

How to set screen properties for Customer fields in PO(Enhanced using BADI)

Hi All,
I have added one custom tab with seven fields in the PO item level using the BADI 'ME_GUI_PO_CUST and ME_PROCESS_PO_CUST'.
Now i want to change the screen property dynamically. According to some calculation i need to change the customer fields in display mode and change mode. when ever it is in change mode i need to set the fields as mandatory.
How can i implement this logic using this BADI. Please help in solving this issue.
Best regards,
Kannan. B

Hi,
Try adding the code in the PBO part of your custom program used for the custom screen which you have created and added inside the BADI.
Regards,
Harish

How to set the fields invisible/visible dynamically with screen-exits

Goal: I am changing the subscreen from standard screen for mobile device interface, i.e. function group LMOB. With a scanner I am to read a material number and have it confirmed by the SAP system. For this I need an input field which is already supplied by the standard program. The users require the screen to be dynamic, i.e. I can not do the settings in the screen-painter.
Problem occurred: After I have changed to use the customized subscreen 1202 in function group XLRF, not all the fields are displayed. It seems that the values for setting the screen elements are lost when calling the subscreen (3202, copy of screen 2202). For instance, it does not show my input field. Somewhere there need to be a list that contains all these parameter switches? I know how Loop at screen works but cant find the values that are supposed to be passed over to the subscreen.
Would be grateful for some help.

Hi Niklas!
Unfortunately I don't know the transaction you're working on, but I had a similar problem once.
You have to use the commands LOOP AT SCREEN and MODIFY SCREEN. I found some online help here: <a href="http://help.sap.com/saphelp_470/helpdata/en/9f/dba70535c111d1829f0000e829fbfe/frameset.htm">SAP Online Help</a>. The fields of the pseudo-table SCREEN can be found here: <a href="http://help.sap.com/saphelp_470/helpdata/en/9f/dbab6f35c111d1829f0000e829fbfe/frameset.htm">SAP Online Help</a>. I think you have to set INVISIBLE to 'X' - but you may have to experiment.
Another thing to look out for is that you have to call this method in the PBO section of the dynpro. Take care no SAP logic is executed after your modification that changes your settings...
Hope this helps (please reward me if it does),
Joerg

How to set country field automatically when creating new customer??

Hi Gurus,
when customer number is entered in account identification, if there is no matching account, a new one is created. While creating , in the screen there is an country field and I want to set this field to a fixed value of our country. How can I do this??

Hi everybody,
I got a simple question. Can I use BADI: BADI_CRM_BP_UIU_DEFAULTS of Enhancement Spot CRM_UIU_BP_ENHANCEMENT
to make the country 'US' as a default value for component: ICCMP_BP_DETAIL (NOT: BP_HEAD)?
Component ICCMP_BP_DETAIL is Interaction Center.
If not which Badi or way I can use to make country 'US' as default value?
Best Regards
Oliver
Edited by: Oliver Schultze on Dec 9, 2010 4:33 PM

How to make screen field enable when table control gives an error

Hi,
I had a scneario like when table control data wrong then one parameter of the screen should be enabled for the input, i knew that screen-name will not work since it will have always table control fields only when table control gives an error.
How to make the other parameter enable when table control throws an error.
Regards,
Jaya

Hi Gobi,
Thanks for your response, but issue is - how to make other screen fields enable when there was an error in the table control data.
For table control - lets say we will use the code as i mentioned above.i am sure that we cant write the code for field enable in between loop & endloop.
as you said if we right outside the loop-endloop, the module wont be triggered when table control throws an error, because that statement was not there in the loop-endloop.
please let me know if you need any more information on the issue. I hope there is alternative for this in SAP.
Thanks
Jaya

How to set the field size in rule file.

i have to map total 30 fields in a rule file while by default it allows only 20 fields. so how can we set the fields as per our need?

Hi Dharmendra Ojha,
Essbase rule file does not constrain you with only 20 fileds.
When you click on 'create a rule file', by default it ll show you 20 fileds .But , when you open a data file ( in your case , you data file has 30 columns i.e 30 fields) in the data prep editor , you ll see all 30 fileds .
So ,you have to do nothing to increase the filed count , rule file will automatically show all fields .
Revert back for further clarity
Sandeep Reddy Enti
HCC
http://analytiks.blogspot.com

How to set Screen type "Selection Screen" in Dialog program

Hi Experts,
I have copied a screen 400 from a program into my program. In that screen in source program, the screen type was defined as 'Selection Screen'. After i copied that screen into my program, the screen type Selection Screen option is disabled. How to set the screen type of a screen to Selection Screen.
I am currently getting the following error
"Error when generating the selection screen "0400" of "Ztest_screen ".
I tried running the generation program RSDBGENA. There the diagnosis was given as follows:
When generating the report Ztest_screen and its selection screen, an existing screen 1000 (not a selection screen) was overwritten.
The selection screen was defined as follows:
SELECTION-SCREEN BEGIN OF SCREEN 400 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK blck1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_matnr FOR mara-matnr.
PARAMETERS: p_werks TYPE werks_d OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blck1.
SELECTION-SCREEN END OF SCREEN 400 .
I am calling the screen 400 with selection screen declarations in PBO of screen 0100.
CALL SUBSCREEN sub_scr INCLUDING 'Ztest_Screen' '400'.
Where am i going wrong? Your inputs are needed.
Thanks

Thanks Przemysław and Nabheet for your suggestions.
I had copied the generated screen 400 also from the source program into my program. This was the error. I deleted that and the report got activated now.
Both the source and destination programs are not module pool. They are executable programs.
Thanks

How to set default field values in customer master data.

hi,
I want to set default values in customer master data (account group wise).
but
I don't know how to set it .
please help me.
(I don't want to change field status in account group rather than I want to set default values for field. )
thank you.

hi,
this is to inform you that,
in SAP there is no such a provision.
but
in LSMW there is an option of CONSTANT VALUES.
check in SHD0 - also
please check and confirm
balajis\a

How to set User-field in Plan order

Hi
could you tell me please how to set a user-filed in plan order. when I run MRP planing, I can write some data in this filed.
thanks
henry

Hi,
Actually these user defind fields are used/assigned in the routing.
Initially u have to define your own user defind profile through OPEC transaction.
Assign this profile in the routing.
So when ur executing Mfg activities, suppose if ur using some high materials like silver...etc.
Then after executing the particular operation some amount of silver chips or silver scrap will generated .
To keep chip/scrap qty operation and date which user defind is used.
Once u have assigned this profile to routing, then it will be automatically copied in the planned order/production order.when ur confirming the order then u have to enter the all related data.
Regards
Vijay

How to change screen field value.

Hi Experts,
I like to change the screen field MSAUS(check box) of program SAPLIQS0 in one of the exit.But if I use
(SAPLIQS0)VIQMEL-MSAUS = 'X'. its showing compile error.Please tell me how can i change this field in this exit.
Regards,
Ajish.

try something like this:
create field symbol
FIELD-SYMBOLS: <fs>.
Assign value of variable from calling prog to field symbol
ASSIGN ('(SAPLIQS0)VIQMEL-MSAUS' ) TO <fs>.
<fs> = 'X'.
Regards,
ravi

How to set screen field in ME_PROCESS_PO_CUST?

Similar Messages

Maybe you are looking for