I get ERROR U44M1P7: Error log file location: C:\Program Files (x86)\Common Files\Adobe\Installers

When updating Photoshop CS6 (Creative Cloud) I get ERROR U44M1P7: Error log file location: C:\Program Files (x86)\Common Files\Adobe\Installers. Initial Installation and actual funcioning wuith no problem, only on updating. I have tried several times with same error.

Hi Alberto Pomares,
Please refer the KB Doc : http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

Similar Messages

Issue while running a custom package:ORA-20100: File o2670336.tmp creation for FND_FILE failed.You will find more information on the cause of the error in request log. in Package PA_OPPORTUNITY_MGT_PVT Procedure modify_project_attributes ORA-20100: File o

Hi Guys,
We have created a custom package where in we are trying to call the standard API's of Oracle projects i.e PA_PROJECT_PUB.When we are trying to call these APIs we are facing the below issue.
We have tried testing in two instances ,Initially it worked in both instances.
Using the same API's multiple times we tested the same data set in these instances.
For the first few runs it works fine.But when we go on using the same API's again and again for our testing we face now and then the below issue.
Standard API's
=========
add_task
update_project
change_structure_status
create_draft_plan
Error:
ORA-20100: File o2670336.tmp creation for FND_FILE failed.You will find more information on the cause of the error in request log. in Package PA_OPPORTUNITY_MGT_PVT Procedure modify_project_attributes ORA-20100: File o2670336.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log. in Package PA_PROJECT_PUB Procedure update_project:ORA-0000: normal, successful completionError while publishing the task
Please let us know if anyone of has come across the same situation.
Regards,
Vijay

But have issue only with validating invoice batch. I followed metalink ID's 605542.1, 167990.1,261693.1,1088553.1,749491.1, 461271.1 and few more.Was this working before? If yes, any changes have been done recently?
Please see if these docs help.
APXAPRVL: Invoice Validation Errors With MSG-00001 and REP-1419 [ID 333305.1]
Invoice Validation Errors When Others:101505:Non-Oracle Exception Rep-1419 [ID 464125.1]
Invoice Validation Fails with REP-1419 Error in Ap_approval_matched_pkg.Execute_matched_checks [ID 293425.1]
Invoice Validation Failing On Fnd_file Could Not Write To File L0202306.Tmp [ID 461520.1]
Invoice Validation (APPRVL) Errors ORA-20001 APP-SQLAP-10000 PSA_FUNDS_CONTROL_PKG.glxfck [ID 463184.1]
Validate Invoice Error With ORA-20001: APP-SQLAP-10000: AP_FUNDS_CONTROL_PKG.Calc_QV [ID 432702.1]
Invoice Validation Program Is Erroring Out [ID 382844.1]
Error On Validation Of Invoices From Previous Periods [ID 412814.1]
Thanks,
Hussein

DS003: Cannot extract 'D:\Adobe CS5_5\payloads\AdobePDFL9.9-mul\Assets2_1.zip' to 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{BAE5212B-6651-4AD8-B26A-1B284D2665C6}'. Error: Error 0

Has anyone gotten this error? I have uninstalled and reinstalled a dozen times and nothing has changed. Is my DVD bad?

Exit code 6. I saved the entire log and pasted it in below.
I went to the two links you provided
:https://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
Installation and launch log errors | CS5, CS5.5, CS6, CC
and found no reference to exit code 6 in the second link, and this seemed to be the relevant entry in the first link.
CS5 products indicate an exit code 6 or 7 in the Installation Status screen, or after you click the Troubleshooting link. To locate the details of which registry keys are affected, open the installation log file. Search for "return value 3," then look just above that text for the error 1401, 1402, and so on.
I found no "return value" in the following, but found these two errors:
ERROR: DF037: Unable to delete directory "C:\Program Files (x86)\Adobe\Adobe\AdobePatchFiles". Error 145 The directory is not empty.(Seq 886)
ERROR: DF037: Unable to delete directory "C:\Program Files (x86)\Adobe\Adobe". Error 145 The directory is not empty.(Seq 887)
However, these are the two errors I followed up on even before I posted this problem. I was able to delete the directories so they WERE empty, and still got the same result. More Exit code 6.
I have complete administrative control of my computer. There's nothing I don't have permission to do.
As for the FATAL: DS003, I get this:
DS003 Cannot create extract assets at <path> from zip file <zip file name>
The unzip operation has failed. There could be directory permission or disk space issues.
See Error "FATAL ERROR: Cannot create extract assets..." | Installer log | CS5, CS5.5.
The zip operation failed at first, but as I mentioned, I was able to fix this. However, this error did not go away after the problem with 7zip was fixed.
The only other possible problem is Error 23, a CRC, which gives me a partial result only.
Error 23 Data error (cyclic redundancy check).
Installation and launch log errors | CS5, CS5.5, CS6, CC
Error code: 23, Updates are disabled. Updater has been disabled at time of
installation. Contacting system administrator for assistance. [ERROR] UWA.
https://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.ht..
264k
The linked page does not contain more information. As it is, that old staple "Contact system administrator" is cited, but I'm the system administrator.
I have no idea what "Updater has been disabled" means. Why are updates disabled? Is this a fixable problem? Do you have any idea about how to "enable" updates?
Full log below.
Bee
Exit code 6 entire log from the Troubleshooting link.
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF037, DS003 ... WARNING: DW031, DW036 ...
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 23 error(s), 26 warning(s)
WARNING: DW031: Payload:{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {42774483-D33C-46F7-8B20-FD0B1A3DAC25} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {42774483-D33C-46F7-8B20-FD0B1A3DAC25} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
----------- Payload: {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 -----------
ERROR: DF037: Unable to delete directory "C:\Program Files (x86)\Adobe\Adobe\AdobePatchFiles". Error 145 The directory is not empty.(Seq 886)
ERROR: DF037: Unable to delete directory "C:\Program Files (x86)\Adobe\Adobe". Error 145 The directory is not empty.(Seq 887)
----------- Payload: {BAE5212B-6651-4AD8-B26A-1B284D2665C6} AdobePDFL CS5 9.9.0.0 -----------
FATAL: DS003: Cannot extract 'D:\Adobe CS5_5\payloads\AdobePDFL9.9-mul\Assets2_1.zip' to 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{BAE5212B-6651-4AD8-B26A-1B284D2665C6}'. Error: Error 23 Data error (cyclic redundancy check).
----------- Payload: {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 -----------
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {60E59A6C-7399-495A-B85C-C829F4E59602} Creative Suite 5.5 Design Premium 5.5.0.0 -----------
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - AdobeColorNA CS5.5: Install failed
ERROR: DW050: - Adobe Illustrator CS5.1: Failed due to Language Pack installation failure
ERROR: DW050: - CSXS Story Extension: Install failed
ERROR: DW050: - AdobeColorCommonSetRGB: Install failed
ERROR: DW050: - Adobe Device Central CS5.5: Failed due to Language Pack installation failure
ERROR: DW050: - AdobeColorCommonSetCMYK: Install failed
ERROR: DW050: - Adobe Linguistics CS5: Install failed
ERROR: DW050: - PDF Settings CS5: Install failed
ERROR: DW050: - Adobe Device Central CS5.5_DeviceCentral3.5LP-en_US: Install failed
ERROR: DW050: - AdobeColorJA CS5.5: Install failed
ERROR: DW050: - Adobe WinSoft Linguistics Plugin CS5: Install failed
ERROR: DW050: - AdobePDFL CS5: Install failed
ERROR: DW050: - Adobe CSXS Extensions CS5.5: Install failed
ERROR: DW050: - Adobe ReviewPanel CS5.5: Install failed
ERROR: DW050: - Required Common Fonts Installation: Install failed
ERROR: DW050: - HIL Help Search: Install failed
ERROR: DW050: - SiteCatalyst NetAverages CS5.5: Install failed
ERROR: DW050: - Adobe Illustrator CS5.1_AdobeIllustrator15_1en_USLanguagePack: Install failed
ERROR: DW050: - Recommended Common Fonts Installation: Install failed
ERROR: DW050: - Adobe Bridge CS5.1: Install failed
ERROR: DW050: - AdobeColorEU CS5.5: Install failed

Cannot shrink log file 2 because the logical log file located at the end of the file is in use ?

HI,
I am getting this error frequently.. any recomendations :
Executed as user: DB0\sqlservices. Processing database: dbin [SQLSTATE 01000] (Message 0)
Cannot shrink log file 2 (DB_log) because the logical log file located at the end of the file is in use. [SQLSTATE 01000] (Message 9008)
Processing database: DB_ [SQLSTATE 01000] (Message 0) DBCC execution completed. If DBCC printed error messages, contact your system administrator. [SQLSTATE 01000] (Message 2528)
Cannot shrink log file 2 (DB_log) because the logical log file located at the end of the file is in use. [SQLSTATE 01000] (Message 9008)
Processing database: DB [SQLSTATE 01000] (Message 0)
DBCC execution completed. If DBCC printed error messages, contact your system administrator. [SQLSTATE 01000] (Message 2528)
Backup, file manipulation operations (such as ALTER DATABASE ADD FILE) and encryption changes on a database must be serialized. Reissue the statement after the current backup or file manipulation operation is completed. [SQLSTATE 42000] (Error 3023)
Processing database: DB_AC [SQLSTATE 01000] (Error 0)
[SQLSTATE 01000] (Error 0) DBCC execution completed. If DBCC printed error messages, contact your system administrator. [SQLSTATE 01000] (Error 2528).
The step failed.
Please give any receomendations to avoid this error in future :
Yangamuni Prasad M

Hi Yangamuni,
Are there any progress?
Please have a look on the below threads with the similar issues as yours:
http://www.sqlservercentral.com/Forums/Topic652579-146-1.aspx
http://social.msdn.microsoft.com/forums/en-US/sqldatabaseengine/thread/ae4db890-c15e-44de-a2af-e85c04260331
The solution is change the recovery mode to SIMPLE, shrink log files and then change to the FULL recovery mode.
Thanks,
Weilin Qiao
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

The procedure entry point ?videoTracks@QTMovie@@QBE?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverflo w @2@@WTFAAXZ could not be located in the dynamic link library C:\Program Files (x86)\Common Files\Apple\Apple Application Support\WebKit.dll.

After I updated my Itunes I always get this Error:
The procedure entry point
?videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverflow @2@@***@@XZ could not be located in the dynamic link library C:\Program Files (x86)\Common Files\Apple\Apple Application Support\WebKit.dll.
And the I get:
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 127)
I tried the following:
- Re-Installing Itunes
- Uninstalling every software from Apple deleting every registery entry and then re-installing it. (itunes, quicktime, bonjour etc.)
This error is really a pain in the ***. I run Windows 8.1. When I go back to a restore point then Itunes works again. I searched but didn't find a solution that worked for me. Please help me.
As a software engineer, I really wonder if this is 98 or 2014....

Try the following user tip:
iTunes for Windows 11.1.4.62: "The procedure entry point: ?videoTracks@QTMovie@ [...] could not be located ..." error messages when launching iTunes

I'd like to change the dfault file location, C:My pictures, to another file location, eg E or G. What can I do to change it?

See above question.

Hi trshaner,
Thanks again for your complete reaction. I’ve looked at the video and the help-information. This made me decide to leave the file My pictures where it is (C) and move some of the other folders/files to the E-drive. Thanks for your help.
Met vriendelijke groet,
Aad Oudshoorn
Edelsteensingel 166
2719 RC Zoetermeer
06-22250606
Van: trshaner
Verzonden: dinsdag 22 juli 2014 20:09
Aan: Aad Oudshoorn
Onderwerp: I'd like to change the dfault file location, C:My pictures, to another file location, eg E or G. What can I do to change it?
I'd like to change the dfault file location, C:My pictures, to another file location, eg E or G. What can I do to change it?
created by trshaner <https://forums.adobe.com/people/trshaner> in Photoshop Lightroom - View the full discussion <https://forums.adobe.com/message/6573614#6573614>

C:\Program Files (x86)\Common Files\Adobe\HelpCfg\en_US\Reader_10.0.helpcfg. Verify file access

how to install Adobe HelpCfg file ?
It is obviously it is missing & i am unable to download Adobe Reader on win7 x64
does anyone have a link that will enable me to download it to read as isstated below?
C:\Program Files (x86)\Common Files\Adobe\HelpCfg\en_US\Reader_10.0.helpcfg
Seems too many issues with ie10 & Reader XI so I prefer ie8 & Reader 10....but can't get any to download.
error 1310....tried everything nothing is helping. Just need link to install this Adobe HelpCfg

What exactly means "unable to download"?
Is there anything else beside the number 1310?

What silent switch can I use to make this uninstall? C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\PDApp.exe --appletID="DWA_UI" --appletVersion="2.0" --mode="Uninstall" --mediaSignature="{A4ED5E53-7AA0-11E1-BF04-B2D4D4A5360E}"

What silent switch can I use to make this uninstall? C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\PDApp.exe --appletID="DWA_UI" --appletVersion="2.0" --mode="Uninstall" --mediaSignature="{A4ED5E53-7AA0-11E1-BF04-B2D4D4A5360E}"

Your install log indicates you are facing file permission issues. You can see an example here:
DF037: Unable to delete directory "C:\Program Files\Common Files\Adobe\Keyfiles". Error 145 The directory is not empty.(Seq 1) [ 1904] Fri Dec 28 07:00:31 2012 WARN DW063: Command ARKDeleteDirectoryCommand failed.(Seq 1) [ 1904] Fri Dec 28 07:00:31 2012 ERROR DF037: Unable to delete directory "C:\Program Files (x86)\Common Files\Adobe\ssc\CreativeCloud-CS6-Win-GM". Error 145 The directory is not empty.(Seq 2) [ 1904] Fri Dec 28 07:00:31 2012 WARN DW063: Command ARKDeleteDirectoryCommand failed.(Seq 2) [ 1904] Fri Dec 28 07:00:31 2012 ERROR DF037: Unable to delete directory "C:\Program Files (x86)\Common Files\Adobe\ssc\CreativeCloud-CS6-Mac-GM". Error 145 The directory is not empty.(Seq 3) [ 1904] Fri Dec 28 07:00:31 2012 WARN DW063: Command ARKDeleteDirectoryCommand failed.(Seq 3) [ 1904] Fri Dec 28 07:00:31 2012 ERROR DF037: Unable to delete directory "C:\Program Files (x86)\Common Files\Adobe\ssc\AMT". Error 145 The directory is not empty.(Seq 4)
You will want to adjust the file permissions for C:\Program Files\Common Files\Adobe and C:\Program Files(x86)\Common Files\Adobe. You can find information on how to adjust the file permissions at Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html. Please make sure you apply the permission change to all child objects.
In general you can find information on how to review and interpret your installation log at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

Trying to install iTunes 10.7 fails - "The installer has insufficient privileges to access this directory: C:\Program Files (x86)\common\files\apple\MobileDeviceSupport\Sync Services\....\Windows

I am trying to install iTunes 10.7 and keep getting this error message (I am running Win 7 Ultimate 64 bit):
"The installer has insufficient privileges to access this directory: C:\Program Files (x86)\common\files\apple\MobileDeviceSupport\Sync Services\....\Windows"
There seem to be other threads that deal with other permission errors, those fixes did not work for this.
Thanks

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

When trying to uninstall Apple Mobile Device Support: The Installer has insufficient privileges to modify this file: C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\com.apple.MobileSync.client.resources\ClientDescription50.plist.

When trying to uninstall Apple Mobile Device Support: The Installer has insufficient privileges to modify this file: C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\com.apple.MobileSync.client.resources\ClientDescription50.plist.

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

How to configure the zxp so that it will place the related files for the panel in specific folder other than the usual 'C:\Program Files (x86)\Common Files \Adobe\CEPServiceManager4\extensions\' folder ?

Hi,
I am Working on a panel for Adobe Premiere pro CC, Now we got a panel set up which will install all the related folders and files which are part of the Extension content folder in the
C:\Program Files (x86)\Common Files \Adobe\CEPServiceManager4\extensions \Panel\CONFIG folder. But we need to change this location to C:\Users\USER\APPDATA folder or any other user specified folder during installation itself.
Is there any way to do this from extension builder?
Thanks and Regards,
Anoop NR

Thanks guys,
Got it !! Hybrid extensions.
I am using Adobe Extension builder 3 in Eclipse to code and create the zxp for Premiere pro panel.
Seeing the hybrid extension part in HTML Panels Tips: #10 Packaging / ZXP Installers | Photoshop, etc. I have added a hybrid extension panel using the bundle manifest editor in the extension builder. it creates an mxi file automatically with all the properties, I have to change the maximum host version number in the mxi file in order to make the extension work in the Premiere pro CC 2014. Using the Hybrid option in the Bundle manifest editor we can choose a set of folder paths for placing the files during installation itself and later can be used using 'csInterface.getSystemPath(SystemPath.CODE)' from javascript functions to modify them.
Thanks for your relpies,
Anoop NR

%PROGRAMFILES(x86)%\Common Files\microsoft shared\OFFICE15\Office Setup Controller missing setup.exe

Hello everyone. I'm told that I can run a repair of Office 2013 via the following command line pointing to a repair config xml we made and placed on a server. Only problem is that my machines don't have a setup.exe in that path. Did the
path where setup.exe is located change or something?
%PROGRAMFILES(x86)%\Common Files\microsoft shared\OFFICE15\Office Setup Controller\setup.exe /repair ProPlus /config \\server\share\RepairConfig.xml

Is your Office a Click-To-Run version or a MSI (traditional) version? If it’s a MSI version, setup.exe should be there. If it’s a Click-To-Run version, then you should not find any file called setup.exe there in that path.
For Click-To-Run version of Office, you should run the Office Deployment Tool and provide a custom Configuration.xml configuration file. The Office Deployment Tool performs the tasks that are specified by using the optional properties in
the configuration file. For details about Office Deployment Tool for Click-to-Run, please refer to this article:
http://technet.microsoft.com/en-us/library/jj219422(v=office.15).aspx

TS1538 I do not have the Driver folder in this folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support like it says I should and myApple Iphone appears in Portable Devices. I tried uninstalling the driver and reinstalling it.

I do not have the Driver folder in this folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support like it says I should and my Apple Iphone appears in Portable Devices only, not in Universal devices. I tried uninstalling the driver and reinstalling it. My Iphone is still not recognized by Itunes when I plug it in. I can see my photos in the internal storage folder on my Windows 7 system though. So I know my PC sees the device. The Iphoneis an Iphone 4 with IOS 6 installed. It was working fine until I had to reinstall my Windows system. Now Itunes does not see it. I've uninstalled Itunes and reinstalled it (64bit) to no avail. Where is the Driver folder article TS1538 talks about?

Sorry I missed your post. Anyone else with the same issue should find useful resources at Troubleshooting issues with iTunes for Windows updates.
tt2

How do I delete C:program files (x86)/common files/apple

How do I delete C:program files (x86)/common files/apple ?
There is a prompt which says that the folder or file is in use in another program.
I am trying to uninstall all Apple progams as suggested by apple support because iTunes won't communicate with my iPod

Hello RooDogg,
Thanks for the question. It sounds like there may be a program or service still running that is utilizing this folder. You can double check by making sure the 6 components are uninstalled from the Control Panel:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
1. iTunes
2. QuickTime
3. Apple Software Update
4. Apple Mobile Device Support
5. Bonjour
6. Apple Application Support (iTunes 9 or later)
If the above are already uninstalled, restart your computer and then confirm that the C:\Program Files\Common Files\Apple\ can be removed. If it cannot, follow the additional steps at the bottom of the article (referring to iPodService.exe).
Thanks,
Matt M.

I get ERROR U44M1P7: Error log file location: C:\Program Files (x86)\Common Files\Adobe\Installers

Similar Messages

Maybe you are looking for