I have an iphone 3gs and when i first updated to the ios 5 it didnt work, when i did it again, it shut down my phone and told me i had to restore.  However, when i try to restore it gets stuck in "restoring iphone firmware"  Help!!!!

I have an iphone 3gs and after trying to update to ios 5 my phone needed to be restored and is now stuck in "restoring iphone firmware"  I have tried powering on and off, reinstalling itunes, my phone is useless.  Is this temporary or is it dead?

Ali i had this problem today and it took me 7 hours to get it back on . i ended up downloading firmware from a third party site , it  was a nightmare . i would recommend just taking ur fone into apple

Similar Messages

  • HT4972 Hi I am trying to upgrade my iPhone Model#A1303 to iOS6 through iTunes. The iOS is upgraded but activation is pending. Says activating serveris temporarily unavailable repeatedly and i am unable to use my phone. Please help to upgrade or restore.

    Hi I am trying to upgrade my iPhone Model#A1303 to iOS6 through iTunes. The iOS is upgraded but activation is pending. Says activating serveris temporarily unavailable repeatedly and i am unable to use my phone. Please help to upgrade or restore.

    That's usully symptomatic of a phone that was jailbroken or hacked to unlock it.

  • I have an iPhone 3gs on Baseband 5.14.02, does the iOS 5 run on this?

    I have an iPhone 3gs on Baseband 5.14.02, does the iOS 5 run on this?

    Yep. Any 3GS can be upgraded to iOS 5. The baseband you have at the moment (5.14.02) is irrevelent; it will be upgraded when you go to iOS 5. Unless you're relying on a software unlock (which is prohibited by the Terms of Use and as such we can't help you here) you can update just fine, your baseband version will be updated as well but this will have no effect on the operation of the phone.

  • HT4623 please help - installed IOS7 and now I am having problems playing Words Free on my Iphone.  It gives me a pop up telling me to connect to ITunes but will not connect.  Cannot get out and have to continually shut down my phone and start over.

    please help - installed IOS7 and now I am having problems playing Words Free on my Iphone.  It gives me a pop up telling me to connect to ITunes but will not connect.  Cannot get out and have to continually shut down my phone and start over.

    Hi, jeantwin.
    Thank you for visiting Apple Support Communities.
    The steps in the article below may help you resolve the issue with push notifications.
    iPad and iPod touch: Unable to use YouTube or Push notifications
    http://support.apple.com/kb/ts3305
    If the issue persists, try signing out of your Apple ID and then sign back in.
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311
    Cheers,
    Jason H.

  • I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymor

    I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymore. My computer doesn't want to read it anymore. I want to mention that I also tried on some other computers and still the problems continues. How can I solve this? On the Adobe webpage I can't find anymore the download for Adobe CS4. Thanks. Marius Lupu

    You can download the software from http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html and can serialize it with the serial number you have.
    NOTE:- READ THE INSTRUCTION PROPERLY TO AVOID ANY ERROR.

  • I shut down my computer and now it starts up, then shuts down again., I shut down my computer and now it starts up, then shuts down again.

    I shut down my computer and now it won't restart. It starts, the apple logo appears, the wheel turns and then it's shuts down again. It has done that ever since.
    My CD-Rom does not work so I can't reboot using the start up disk. Does anyone know what I can do to make it restart again ?????

    Try resetting the SMC (http://support.apple.com/kb/ht3964).

  • I got an iPhone 3gs!! i tried updating it to iOS 6!! but then went off in between after it stopped and remained stucked! i pressed the power button nd the hme button 2geta! then it went off.... now when i switch it on.. it goes on then off then on.. help!

    i have an iphone 3gs........it is not jailbroken........I was updating to iOS 6!! THen a box came up saying ios 6 will install in 5 seconds................ after wards....... it shut down then restarted.............. the apple logo came up and then below it was a bar.......... it had to be full to complete the installation ............ after a few minutes the bar stopped in between and remained stuck!!! then i pressed the home button and the powerr button together........ it turned off!!! then i restarted it ......... the apple logo comes up then goes off!! it happens and is not stoping until i press the power button once!! whenever i m starting it ....... the apple logo is coming up then goes off ... plz help me........... my father will scold me!! plz :'( plzz :'( thank u.......... :'(

     

  • How can I restore my iPhone 3Gs after I tried to update to the new operating system.

    I tried to upgrade my 3Gs to the new operating system(IOS5) and I got some kind of unknown error.  I told iTunes to do the back up before doing the upgrade.  The phone is stuck in restore mode with the "connect to iTunes" logo displayed.
    I have the latest version of iTunes on my computer. I've restarted my computer.  The iTunes doesnt seem to see the iPhone, but when I connect the phone to the computer I hear the recognition jingle by the comoputer, the one you hear when when a piece of equipment is connected to the computer.  In addition, when i look at "my computer"  I dont see the iPhone in the selections of items connected to the computer.
    I have tried all the reset proceducures with turning the phone off and using the home key.
    Does anybody have any suggestions?

    Hi,
    See Here for
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • I have a iphone 3gs and it will not update to the IOS 5.1.1

    I have a iphone 3gs and it will not update. I have tried going to settings and it doesnt even show up the software button to check and see if I can update.  I have also tried on itunes to see if i will update and all it says is "the version iphone software (4.2.1) is the current version"
    any ideas to help?

    Post the model number. You probably have an iPhone 3G.

  • HT1848 I have a iphone 3GS but it won't update to the latest version, is it because my phone is to old?

    I can not update my iphone and i cant seem to ind out. i have tried to unlock it but it still does not update.

    Iphone 3gs can update to 6.0.1
    Iphne 3g can only go to 4.2.1

  • Got a refurbished iphone 4s to replace my lost iphone 4, the 4s has horrible battery life, only lasts about 3 hrs even when not in use and it will not update to the iOS 5.1, i have tried four times now, please help

    please help

    Basic troubleshooting from the User's Guide is reset, restart, restore.  Has any of this been tried?

  • Ever since I updated to the iOS 8.0.2 I can't sign into iCloud or my apple account and I can't open some of the pages

    after downloading the new iOS 8.0.2 on my iPad I can't sign into my itunes account or iCloud
    struggles to open pages I also have problems with my iPhone 5S since downloading the software
    can an some help please

    Nellymay,
    I would recommend reviewing this article. You may want to consider beginning at step five: 
    iOS: Not responding or does not turn on
    Resolution
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    A restore of the device, and setting it up as new will help with the  software issues you've described. 
    Thanks,
    BobbyD

  • Can U look at my code and give me any idea why the scatter garph didnt work

    Hi,
    i use this code to create a scatter graph using bean in oracle 10g forms and it didnt show the points.. it only show an empty graph although the cursor return data..Please if anyone know whats the problem i would be so thankful.
    And here is the code:
    DECLARE
    cursor c is
    SELECT
    FRA_YEAR, -----> X
    TOTAL_AMT_IN_BASE -----------> Y
    FROM TMP_GRPH
    ORDER BY FRA_YEAR;
    cdata varchar2(2000);
    vd varchar2(2);
    X NUMBER;
    Y NUMBER;
    COUNTER NUMBER;
    cdata varchar2(2000);
    vd varchar2(2);
    X NUMBER;
    Y NUMBER;
    COUNTER NUMBER;
    BEGIN
    set_custom_property('CHART.SIMPLEGRAPH',1,'CLEAR_GRAPH','');
    SET_CUSTOM_PROPERTY('CHART.SIMPLEGRAPH',1,'DEBUG','TRUE');
    VD := ',';
    COUNTER := 0;
    OPEN C;
    FETCH C INTO X,Y;
    while (C%FOUND) LOOP
    CDATA := X||VD||X||VD||Y||VD||Y;
    set_custom_property('CHART.SIMPLEGRAPH',1,'ADD_ROWDATA',CDATA);
    FETCH C INTO X,Y;
    END LOOP;
    set_custom_property('CHART.SIMPLEGRAPH',1,'GRAPHTYPE','SCATTER_GRAPH');
    set_custom_property('CHART.SIMPLEGRAPH',1,'ADD_DATA_TO_GRAPH','');
    CLOSE C;
    set_custom_property('CHART.SIMPLEGRAPH',1,'SHOW_GRAPH','');
    EXCEPTION
    WHEN OTHERS THEN
    MESSAGE('SQLCODE='||SQLCODE||SQLERRM);
    MESSAGE('SQLCODE='||SQLCODE||SQLERRM);
    end;
    note:
    FRA_YEAR is the X-axis
    TOTAL_AMT_IN_BASE is the Y-axis
    Thanks alot
    Eyad Basheer

    Hi,
    please see the html help file (graph90.html) that comes with the Graph bean sample. The debug option is enabled with a call to set_custom_poperty('blockname.beanarea',1,'DEBUG', true)
    The messages are written to teh JInitiator console (see right bottom corner of windows to open)
    Frank

  • I have ip 3gs and ios 4.1 i want to upgrade it to download latest version of apps ,which ios will be compatible and is there any danger to update ios before i erased all settings and content and i tried to update but it failed .it is working properly

    i have ip 3gs and ios 4.1 i want to upgrade it to download latest version of apps ,which ios will be compatible and is there any danger to update ios before i erased all settings and content and i tried to update but it failed .it is working properly but i want to update from itunes.iwill do back up but is there any other thing i will face after updating like it will jut show apple loge and will not work. please answer quickly

    An iPhone 3GS is too old to update to the very latest iOS and you will never be able to use apps that are compatible.  The phone is just too old now in technology terms and the app makers have all moved on, so it's time to get a new phone. 
    Ideally, perhaps get an iPhone 4s or if you can afford it, an iPhone 5s or 5c which are the newest models.

  • HT1414 Suddenly my iphone 3GS scrren went dark.  Seems like the backlight is out? Tried to reset with no luck??

    Suddenly my iphone 3GS screen went dark.  Seems like the backlight isn't working.  I tried to reset it, with no luck.  Any other suggestions?  The phone was working just prior to this...

    I Plugged it into computer and hit the reset buttons and Now I have a screen! Thanks so much  

Maybe you are looking for

  • No "Voice Dialer" prompting after GB Update

    Has anyone else had an issue with the stock "voice dialer" no longer working properly since the recent OTA to 2.3.4 (Gingerbread)?  I have the same "won't appear / won't disappear" issue with the voicemail notifications, but I have one other issue, a

  • Itunes wont update or install

    This is a nightmare! I have had issues with each Itunes update on Windows 7, 64 bit Operating System and each issue has been different.  With the recent update I got the following message "Could not open key: UNKNOWN\Components\ random string of lett

  • How do I get a browser plug-in to work if it isn't compatible with my version of Mozilla

    I have McAfee Site Advisor installed which as far as I know is a browser plug-in and I keep on getting prompts to update to Firefox 6. However I noticed that when I tried to update, my site advisor wont work this this version and so for this reason I

  • Encryption of notepad file

    Hello Gurus, I need to encrypt a notepad file containing some information. This notepad is the result of an ABAP program. For encryption we need to run an executable file from MS DOS prompt. I have to open command prompt and then choose the .EXE file

  • Keyword Search showing too many photos

    I have over 22,000 photos and over 300 keywords for them.  Sadly I cannot search by keyword since the keyword list only shows the last 146 keywords on the screen (a known bug that, in my case, only shows keywords beginning with p-z) and there is no w