IDoc Configuration for Production Order Creation and Change

Hi All,
Please Help me out for IDoc Configuration for Production Order Creation and Change
I have found the IDoc for Production Order
Messgae Type : LOIPRO and IDoc type : LOIPRO01
Actually my requirment is to send the (LOIPRO01 )IDoc from SAP R/3 to XI system ,when ever the Production Order Created and Changed,
I have done following Configurations:
1. RFC Destination created for XI system
2. PORT was created for XI
3. Partner profile created WE20 and LOIPRO01 IDoc is added in OutBound Perameter.
I need to know how to do the followning.
1. How do i configure the outbound Production order idocs when Production Order is created or changed.
2. in NACE (Output control) which is the Application for Production Order.
3. How can I set IDoc as output Type for Production Order Creation.
Thanks in advance
Dhanabal T

Hi Michal,
I know that it is the old thread but still want to get clarified from you out of curiosity.
Unlike other IDOC, i actiavated change pointers for LOIPRO
1.message and idoc type is linked
2.function module , message type , idoc type is linked
function module used is CLOI_MASTERIDOC_CREATE_LOIPRO
3.BD64, distribution model is created and distributed
4. port and partner profile is in place.
5. IDOC is not getting generated after creating the process order.
do we need to activate the change documents for the message type in BD52,
if yes can you please provide the object types for the same.
or i am missing something else. please guide me in this regards.
Thanks in advance for your time.
S.Janagar

Similar Messages

IDOC/BAPI for Production order creation from Legacy system

Hi all
We are using an interface to create Production orders from legacy to SAP. Would you recommend an IDOC or a BAPI to create Production orders. If IDOC or BAPI then could you please mention which one?
thanks a bunch

Hi John,
For your purposes, please use BAPI for production order creation from legacy system. There is no standard inbound IDoc available to use. SAP has an IDoc for outbound interface only (message type LOIPRO).
If there is an inbound IDoc available, I would recommend to use an IDoc.
IDoc technology has excellent error handling and will allow you to reprocess an error (if any).
BAPI is also good approach to use and fast in term of processing.
For BAPI approach, you can use BAPI BAPI_PRODORD_CREATE.
Hope this will help.
Regards,
Ferry Lianto

Run time error while running BDC for production order creation and confirmation:

Dear Gurus,
We have a situation, where the users are trying to do the entries creation of order or confirmation (through manual and BDC). But, if there is any kind of a deficit quantities in consumption or GR quantity, then it is going to run time error and Dumps are coming in program SAPLCORB
and the transaction code is coming for CO11N.
How to avoid this error to run the production system in smoothing way...Any flash lights on this will be great full
Regards,
Madhu.G

Hi Madhu,
Expert Caetano has rightly point out. Refer Note 1840705 - RAISE_EXCEPTION short dump if running CO11N in background
Cause
The short dump is triggered because SAP transaction CO11N contains new GUI elements that cannot always be dealt with in a background process,
such as the confirmation texts.
Resolution
SAP recommends that the standard production order BAPIs, such as BAPI_PRODORDCONF_CREATE_TT, should be used to post a confirmation in background.
If this is not feasible, the following workaround may be uses:
Define a confirmation profile in transaction OPK0;
In the detail areas, remove the area "Confirmation text";
Set this profile as standard, so that it is chosen automatically by the system when a batch-job
is started;
Assign this confirmation profile to the batch user with transaction SU3 using parameter CORUPROF.
Also see Note 429432 - CO11N: Batch input in background dumps if long text is maintained
Refer to note 1154692 - Endless loop during confirmation in background if you doing Auto GR during confirmations
Thanks & Regards,
Ramagiri

How to trigger an Idoc from Sales order creation and change

We are trying to trigger Idoc from sales order creation and change we have done following setting mentioned below:
Follow the below steps:
1. Go to NACE transaction
2. Select V1 application and select OUTPUT TYPES
3. Select the required output type and double click on Processing routines.
4. Enter Medium as DISTRIBUTION ALE, Program as RSNASTED and Routine as ALE_PROCESSING.
5. Save it.
message type ORDERSP in the distribution model (BD64).
Follow the below steps to configure the condition records:
1. Go to NACE
2. Select V1 application and select CONDITION RECORDS
3. Select the requred output type and click on Condition records
4. Selection screen will be displayed.
5. Go for execution. In that screen enter the selection criteria. For eg Condition record is based on Sales document type. Then
Sales doc type = OR
Funt = SP
Partner = blank. It means there is no restriction on partner numbers.
Medium = A
date/time = 4
Lan = EN.
Note: partner is left blank means, the sales order of type OR can be send to all partners.
6. Save it.
We also done ALE configuration.
We are facing problem that from VA02 "No output has been selected for printing Message no. V1102"
Kindly suggest the solution.
Regards,
Sharad Dixit

Hi ,
Please check the total error description and diagnosis as below :
InVa02 enter SO go to extras->output->Header->edit.You can find a table with all the triggered output types. Choose the output type BA00 with medium Distribution ALE and go for 'Processing log'. It will show you the error description.
Please paste the diagnosis .
Thanks and Regards,
P.Bharadwaj

Production Order : OUTPUT Type Configuration for Production Order as EDI

Dear SDN All ,
OUTPUT Type Configuration for Production Order.
Doubt in third Point
We have found the IDoc " LOIPRO01 " for Production Order
(Please confirm that this IDoc can be used for outbound IDoc for Production Order)
And foloowing
1. Defining the Output Type for Particular Application.
 T-Code: NACE
A. Output type have created upder application "ME" description : "Inventory Management"
B. " ZEDI " created for getting output as EDI type
 ZEDI is copied from "WF01" output type. and
 Transmision mediam as "EDI"
 Program : RSNASTED
 Form Routine : EDI_PROCESSING
 (Please confirm is this for IDoc creation)
2. Partner profile creation:
A. Partner profile created under logical system and
B. and In outbound parameter declared as "LOIPRO"(This is for sending the IDoc "LOIPRO01" to XI system).
3. Customization for output type for Proction Order -- (For CO02,CO08) ---
 A. But only one functional customization is remaining to do, for getting the IDoc while saving the Production Order in T-Code "CO02" and "CO08"
 For Example:
 in sales order transaction va02 (in DBI 450 client) and select any Sales order.
 & select following menu path.
 Extras --- > Output -
> Header -
> output
 Here we can set our output type "that U defined in NACE Transaction-Code"
 Like the same way I want to set output type for CO02, CO08 transaction.
But I couldn't find the menu Item in Co02 and Co08 for setting the output.(like VA03)
Please help me out for setting the output type for Production Order Creation.
Thanks in advance,
Dhanabal T
Message was edited by: Dhanabal T

Hello.
I have a similar requirement. Did you guys find the solution?

BAPI for Production order creation against wbs element

dear all,
I am using BAPI (BAPI_PRODORD_CREATE) for Production order creation against wbs element.I am putting following input paramters in this
material no,
order type
plant
qty
basic start dt & end dt
wbs
But during GRN it is not taking the account assignment as project stock i.e. its picking movement type 101 but it should be 101Q.
For this what changes are required.
regards
ravi arora

Hi,
2 options i can think of:
1. Create a BDC program by recording co10
2. Create a planned order with order type PR using BAPI_PLANNEDORDER_CREATE, specify the WBS element & other details. Now use BAPI_PRODORD_CREATE_FROM_PLORD to create a production order with reference to the planned order created earlier.
I believe option 2 should meet your need. Check & revert.
Regards,
Vivek

Exit for production order creation that update BOM explosion date

Hi Guros
does any one know a user exit for production order creation that update BOM explosion date = AUFLD.
or a UE that run before the BOM explosion.
thanks.

Dear,
I dont think user exist will work for you,
You need to find BAdi for it, cl_exithandler=>get_class_name_by_interface .
Or try with SE84,
Enter the package name and check the " Enhancements"
Regards,
R.Brahmankar

Is there a Business Object for Sales Order Create and Change VA01 and VA02

Hi experts -
I am looking for a business object for Sales order create and change VA01 and VA02 respectively?
Thanks,
Mark

Hi Mark,
I think this question is best answered in [SAP Solutions|/community [original link is broken]; Forums.
- Subhodeep
Edited by: Subhodeep on Aug 29, 2009 11:14 AM

Function module which uses both BAPI's for sales order create and change

Please name the function module which uses both BAPI's for sales order create and change.
BAPI_SALESORDER_CREATEFORMDAT2
BAPI_SALESORDERCHANGE

Yup.
you must write a piece of code for this.
with if else condition.first check if SO is exsist than use second FM to change it else create new SO from first FM.
logic somethig like this.
Amit.

Regarding bapis for sales order creation and modification

Hi,
I am trying to create a syncbo for sales order creation, modification and display. The bapis that I am using are
1.BAPI_SALESORDER_GETLIST
2.BAPISDORDER_GETDETAILEDLIST
3.BAPI_SALESORDER_CREATEFROMDATA1
4. BAPI_SALESORDER_CHANGE
Am I using the correct bapis. When I tried to create a syncbo it gave the following errors
BAPISDORDER_GETDETAILEDLIST does not have RETURN parameter in export or tables parameter
RETURN parameter in Create BAPI Wrapper should refer to structure BAPIRET2
RETURN parameter in GetList BAPI Wrapper should refer to structure BAPIRET2
GetDetail BAPI Wrapper does not have RETURN parameter in export or tables parameter
No Export parameter referring to header structure exists in GetDetail BAPI Wrapper
No Import parameter referring to header structure exists in Create BAPI Wrapper
No Import parameter referring to header structure exists in Modify BAPI Wrapper
No Import parameter referring to a field of header structure exists in GetDetail BAPI Wrapper
No Export parameter referring to a field of header structure exists in Create BAPI Wrapper
No Tables parameter referring to item structure exists in Create BAPI Wrapper
No Tables parameter referring to item structure exists in Modify BAPI Wrapper
I am informed that the above bapis are standard bapis.
I am not sure as to why I am getting the errors.
Does the syncbo require the bapi's to be in a specific format.
What would be the header and item structures for sales order bapis
Regards
Raja Sekhar

Hi Raja,
ya , for creating Sync BOs ,our BAPI wrappers must satisfy certain conditions..
just go through this link.
u can use the standard BAPIs of SALES Order in ur Custom BAPI Wrapper
http://media.sdn.sap.com/public/html/submitted_docs/MI/MDK_2.5/content/appdev/smartsync/what_is_a_bapi_wrapper.html
the RETURN must be of type BAPIRET2..
Regards
Kishor Gopinathan

Enhancement for Production Order Release and Batch Fixing.

Hi Experts,
I have assigned a enhancement for production order.The user exit is also given in the req as PPCO0001 through which i have to call a Z-Program for Batch fixing using Trans CO01 and release the order before saving once it is assigned to components.
Now my probs is where to start working for the enhancement -is it possible to use any BAPI instead of Batch (BDC) or I can use any BADI instead User Exit.
So if you guys have similar scenario worked on it or have similar example approach to solve it.Please do help.I will reward for all helpful answers.

I figured out thr friends !
Thanks,
SriRam

Table for Production order planned and Actual cost

Hi Experts,
Can anybody please tell me the name of table where Production order planned and Actual cost gets saved ?
Thanks in advance.
Regards,
Bijay

Table COEP
don't forget the points

Add new authorization object for production order creation/change/display

As mentioned. I definded new authorization object using "Production scheduler" (Field Name : FEVOR) by SU20. then use SU21/SU24 to add authorization object for some transaction code such as COOIS. use PFCG maintain new role and assign a fixed production scheduler value and assgin transaction code COOIS to this role. create new user ID and assign to that role.
logon system with new ID, run COOIS. but system don't check new authorization object(production scheduler). who can tell me why it is and how i can add new new authorization object for standard transaction code?
Thanks.
Kevin.WU

Hi,
there is an icon of generation. just click there in PFCG and also in su21.
then add this object in new role.
Assign this role to user id
while assigning the role also there is a generation.
Please take a help of BASIS consultant also as this is entire a BASIS process.
Regards
Amit parkhi

Automatic production order creation and confirmation

Dear all,
I am in a situation where i have to configure the SAP system in the following ways:
1. From the planned orders automatically production order should be created today for the next day production and the end user will re-declare the quantity if there are any changes in the production order.
2. If there are no re declarations to be done SAP should automatically release production order and save it.
3. After the goods are produced the confirmation of the order should happen automatically from the measuring points.
4. In the order confirmation, the storage location for goods issue should be automatically captured from the goods issue slip.
5.After the confirmation of the order the goods receipt should happen automatically.
Please suggest me whether these are possible in SAP or not. If yes please tell me the procedure.

HI,
I hope this will give you the clear picture
actually my scenario is:
Finished good= x
work centers involved = WC1, WC2.
HERE BOTH THE WORK CENTERS ARE IDENTICAL, INPUTS ARE SAME AND OUTPUT IS THE FINISHED GOOD "X" FOR BOTH THE WORK CENTERS.
I HAVE A ROUTING FOR THE FINISHED GOOD "X" WITH TWO GROUP COUNTERS AS (1)WC1 AND (2) WC2
When i create plan in md61 for 1 month and when i do mrp run in md02 it will create the planned orders and we can see the stock requirements in md04 and when we double click on the planned order we can convert them into production orders.
But my users requirement is, he want to run the mrp in md01 and after that automatically each day the production order should be created.
example with the above work centers and materials:-
i have done the mrp run for "x" for November and December months
i want to produce "x" of 200 kg on 30.11.2011.
so SAP should generate production order for WC1 AS 100KG AND WC2 AS 100KG on 29.11.2011 at 5 pm automatically and the user will release the order.
similar example:-
i have done the mrp run for "x" for November and December months
i want to produce "x" of 400 kg on 03.12.2011.
so SAP should generate production order FOR WC1 AS 200KG AND WC2 AS 200KG on 02.12.2011 at 5 pm automatically and the user will release the order.
Please suggest me how to do the configure settings for my users requirement.
Thanks,
Aravind.C

BAPI for Production Order creation ?

Hi Experts,
I am new to PP module and as per my requirement I have to:
1. Create Production order in ECC 6.0
    After searching BAPI explorer, SDN and other sites I could see that there is no BAPI for Create Production order.
    In one of the link I could find FM CLOI_CHANGES_UPL_31 used to create Production order in SAP.
Is there any BAPI to create ??
Can anyone let mw know right FM or BAPI to create Production order with an example.
2. And I have to:
Delete Production order
which BAPI is used for deletion of Prd Ord
BAPI_PRODORD_SET_DEL_INDICATOR or BAPI_PRODORD_SET_DELETION_FLAG
For Confirm Production order - in ECC 6.0 Let mw know the BAPI for this ..
Really helpful if you answer my queries...
Thanks
Uday

Hi udaya,
use the BAPI 'BAPI_PRODORD_CREATE'
The following BAPIs are available confirmation of production orders:
    Entry
        Time ticket
        ProdOrdConfirmation.CreateTimeTicketMultiple
        BAPI_PRODORDCONF_CREATE_TT
        Time event
        ProdOrdConfirmation.CreateAtHeaderLevelMultiple
        BAPI_PRODORDCONF_CREATE_HDR
        Order confirmation
        ProdOrdConfirmation.CreateAtHeaderLevelMultiple
        BAPI_PRODORDCONF_CREATE_HDR
        Activity confirmation
        ProdOrdConfirmation.CreateActConfMultiple
        BAPI_PRODORDCONF_CREATE_ACT
    Defaults
        Time ticket
        ProdOrdConfirmation.GetTimeTicketProposal
        BAPI_PRODORDCONF_GET_TT_PROP
        Time event
        ProdOrdConfirmation.GetTimeEventProposal
        BAPI_PRODORDCONF_GET_TE_PROP
        Order confirmation
        ProdOrdConfirmation.GetAtHeaderLevelProposal
        BAPI_PRODORDCONF_GET_HDR_PROP
    Cancelling confirmations
    ProdOrdConfirmation.Cancel
    BAPI_PRODORDCONF_CANCEL
    List of confirmations
    ProdOrdConfirmation.GetList
    BAPI_PRODORDCONF_GETLIST
    Detail data for confirmations
    ProdOrdConfirmation.GetDetail
    BAPI_PRODORDCONF_GETDETAIL
    Existence check
    ProdOrdConfirmation.ExistenceCheck
    BAPI_PRODORDCONF_EXIST_CHK
Regards,
Ravi

IDoc Configuration for Production Order Creation and Change

Similar Messages

Maybe you are looking for