IE9 Problems in Vista

I was updating from IE8 to IE(, which went fine, then I had to reinstall IE9 after it crashed on me. When I tried to do the "Update" download, it di not finish the task. I have tried several times to re-downlad it again, but every time I get
an Error Message: "IE9 Cannot finish download as a newer version exists on the Computer." I would like to just get to ten, but every time I go to the download page, It directs me back to IE9 as a result of Vista. I assume from this that IE10 isn't
compatible with Vista, so how do I basically "Uninstall IE9", and then "Reinstall" it? Tried the directions from Microsaft, but the Search on the Start menu cannot find it, neither can "View Updates". In the meantime, IE9 opens
and closes at will, but when I try to use it, I get blank pages on half of the urls I visit regularly. I am not tech challenged, but then, I am not exactly a pro either. What can I do to fix this? Any help would be greatly appreciated.

They'll help you over here.
http://answers.microsoft.com/en-us/ie/forum/ie9-windows_vista?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1421604671003
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

Problem with vista and 5.1

problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]

My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions.

Airport Extreme Utility problem with Vista (works with XP, MacOS)

Hi,
I just setup a new Airport Extreme network at my house, and most things are working fine. I have wirelessly connected at various points an Airport Express (using WDS), a MacBook Pro (OSX) and an IBM Thinkpad. I have several wired machines as well.
My problem: The wired machine I use to configure and setup everything is a Vista Ultimate machine. Unfortunately, the Airport Utility won't connect to the Airport Extreme (or Airport Express for that matter) from Vista. The utility works fine from XP or OSX, but not from Vista. Note that I'm using this in a wired capacity. The Vista machine is directly connected to the Airport Extreme, while several other machine are connected through a GBit switch.
Any help would be much appreciated? Is this a Vista security problem or an Airport Utility problem with Vista?

It's most likely a security issue with Windows Vista. Vista has the ability to set "compatibility modes" for applications.
Try:
1. right mouse clicking the Airport Utility's .exe file.
2. Click the Compatibility tab. Change the Compatibility mode to Windows XP (Service Pack 2).
3. Now go down to "Privilage Level" and check the "Run this program as an administrator"
Apple never tells you this but you must connect to the Airport Extreme wirelessly. Now run the Airport Utility. You should see it.

Is there a patch to help Dreamweaver work without problems in vista?

Please let me know if there is a patch I can download to make
Dreamweaver compatible with Vista. The problems are numerous and
are driving me nuts at the moment. Can you upgrade to DW CS3 from
the website?
Nick.

There are many of us who are running DW without problems in
Vista. What
problems are you having? Which versions of Vista and DW are
you running?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Megisti" <[email protected]> wrote in
message
news:evf3v1$1nj$[email protected]..
> Please let me know if there is a patch I can download to
make Dreamweaver
> compatible with Vista. The problems are numerous and are
driving me nuts
> at the
> moment. Can you upgrade to DW CS3 from the website?
>
> Nick.
>
>

What u hear problems in vista 32bit

#What u hear problems in vista 32bit2 I just installed the newer variety of the x-fi notebook card with the wireless broadcast function, and for whatever reason installing the drivers failed the first time, I tried a clean install after that, and the microphone is displayed as not available and what u hear isn't present either, so is there a problem in the driver installation or are those features just non existent in the newer software I also noticed that line in works and the microphone input doesn't, gah, windows fixta is irritating,
EDIT: I found out how to get what u hear to work, I kind of felt stupid but all you have to do is right click in the recording device manager and hit show disabled devices and boom what u hear and the microphone input are there, for what reason I don't know why they were disabled in the first place, but hope this helps anyone with the same problem

+Re: "What U Hear" Missing in Win7G ?
Agreed! I have an X-FI Extreme, upgraded to win 7, installed the latest audio drivers, and have just spent the last 2 hours trying to get my "what u hear" back without any luck at all.
I'll also mention that "disabled devices" are shown in the recording options, so that is not the issue.
I was using vista before with the exact same hardware and "what u hear" was available. The driver version was 5.2..200 dated 4/02/07 ... The current driver for windows-7 is 5.2..208 dated 3/08/2009. Maybe installing an older driver would do the trick? I don't know if that would work as I haven't been able to find the old driver I was using for download (just been bombarded with broken links). I'm also guessing that you'll be held hostage to the latest drivers in windows 7.
Get the latest drivers to lose functionality? Sounds like something apple would pull on you!
If anyone has a solution for this, please let us know, otherwise I'll be rolling all the way back to good old XP again.

Power manager problem under vista 64 bit

Happy to see Lenovo opened a forum and willing to hear from the customers.
Power manager has problems under Vista 64bit:
1. Sometimes it will cause explore.exe can't start when windows start.
2. If no window at max, the color of the battery icon will be very dim
Hope Lenovo can publish a new edition for vista 64 bit.

http://it.toolbox.com/blogs/achieving-great-bi/obiee-on-vista-64bit-with-iis-70-29882

Video sync problem in vista premium 32bit even after enabling all movies

video sync problem in vista premium 32bit even after enabling all movies and or movies.the vids are in itunes and ive tried to sync again and again.with no luck .
and i cant seem to find a related or symular problem. has anyone else had this problem?

cbeer77 wrote:
Not sure how to find out the GPU acceleration
Edit > Preferences > General
If GPU acceleration is checked, uncheck it and see if that helps.
Also:
Could you give us a Mediainfo or Gspot screen shot of what's in the AVI wrapper?
Please answer Richard's question.

Acrobat Problem with Vista X64 OLE calls

Acrobat Problem with Vista X64 OLE calls - CreateObject("AcroExch.AVDoc") does NOT open its window in the CreateObject("AcroExch.App") - but opens a new (invisible) window. Works correctly in XP x64 and 32 bit Vista - happens with Acrobat v8 and v9.

Again, I contend that something changed between 8.1.2 and 8.1.3.
refer to http://www.adobeforums.com/webx/.59b6fe7c
To show the viewer, use the show method after the document is opened.
In 8.1.2 you did not have to perform this extra step.

T61 - problem with Vista x64 NVS 140M drivers

Hi!
I have problems with Vista x64 and NVS 140M drivers. Thing is that if I install them, everything will be slideshow, even the audio shutters quite bad and CPU is constantly over 45%. I have tried different driver versions but nothing has helped yet. Any ideas?
I wonder if anyone has the old 7.15.11.0129 driver and could send it to me? Maybe that would help.

Try the following test:
- Go to Vista Sound Control Panel to view the S/PDIF out properties.
- Click on the Supported Format tab page, select Dolby Digital and click Test.
Is the test OK?

IE9 problem linking to a specific tab

I have been happy with my website for almost a year now after asking a few questions relating to Tabbed panels and having my problems solved here.
But I've realised there is a problem that didin't exist before!
I have a Horizontal menu bar at the top of some of my pages and there are links that go to different pages with a tabbed panel with a specific tab opened.
However, when I click on these links, the pages open with the specific tabs opened, BUT the Horizontal menu bar which should be at the top disappears.
The banners at the top left corner disappears too and the whole tab panel is displayed at the top.(so the Tabbed panels are kind of pushing the content at the top out of the screen) When I check the html in Dreamweaver, in Live view, and try to use the link in the menu bar, it shows the same, the Tabbed panel at the top of the page with the specific tab opened. But it shows that it can be scrolled up and when I do, it shows the banners and the Horizontal menu bar.
This hasn't been happening before when I've made the website last year. I'm thinking that it's something to do with IE9 because I was using IE8 when I've made the website and Safari seems to work the same as before. Does anyone know what I could do?
My website is http://minussun.co.uk/home.html
If you could try jumping to "The Concept", "Her Record" or "Her Life" in the About menu or "Her" or "Stockists" in the Contact menu at the top (basically, the links which are aiming at specific tabs) you will see what I'm writing about...

Hello, thank you for checking out.
I'm using windows vista 32bit and never thought that the os matters as well.
It's good to know that it works in the up to date os/browser environment.

Installation problem on Vista

I'm unable to successfully get the SOA server up and running on Vista using Oracle database 10.2.0.4.
When starting the SOA or BAM server, the system responds after a while that the server started ok, but the deployments apparently fail.
I have the following questions:
1. I followed the document "Oracle Fusion Middleware Quick Installation Guide for Oracle SOA Suite" 11g Release 1 (11.1.1). The version is Beta Draft: 2009-03-27. Is this the version to use for the April 10 release?
2. When installing, the only problem I saw was during the creation of the ESS schema with RCU. In the installation manual it is not listed as a required schema for BPEL or BAM. Is it ok to ignore this schema?
Below you can find traces of warnings I get in the admin server log.
When the admin server starts up I get
oracle.bali.xml.grammar.GrammarException: Problem loading model for tag file /WEB-INF/tags/TVViewIview.tagx from file:/C:/oracle11
g/user_projects/domains2/soadomain2/servers/AdminServer/tmp/_WL_user/em/jmb4hf/war/WEB-INF/tlds/tv.tld
at oracle.jdevimpl.webapp.taglib.grammar.TldTagFileElement.preReadDocument(TldTagFileElement.java:470)
at oracle.jdevimpl.webapp.taglib.grammar.TldTagFileElement._load(TldTagFileElement.java:328)
at oracle.jdevimpl.webapp.taglib.grammar.TldTagFileElement.<init>(TldTagFileElement.java:80)
at oracle.jdevimpl.webapp.taglib.grammar.TldGrammarFactory.createElement(TldGrammarFactory.java:89)
at oracle.jdevimpl.webapp.taglib.grammar.TldGrammar._getElementMap(TldGrammar.java:377)
at oracle.jdevimpl.webapp.taglib.grammar.TldGrammar._populateElementMap(TldGrammar.java:346)
at oracle.jdevimpl.webapp.taglib.grammar.TldGrammar.<init>(TldGrammar.java:76)
at oracle.jdevimpl.webapp.taglib.grammar.TldGrammarFactory$1._createGrammar(TldGrammarFactory.java:178)
at oracle.jdevimpl.webapp.taglib.grammar.TldGrammarFactory$1.createGrammar(TldGrammarFactory.java:168)
at oracle.jdevimpl.webapp.taglib.grammar.TldGrammarFactory.createGrammar(TldGrammarFactory.java:70)
at oracle.jdeveloper.webapp.taglib.grammar.TaglibGrammarProvider.createTldGrammar(TaglibGrammarProvider.java:74)
at oracle.jdeveloper.webapp.taglib.grammar.TaglibGrammarProvider.addTaglibGrammars(TaglibGrammarProvider.java:51)
at oracle.jdeveloper.webapp.taglib.grammar.TaglibGrammarProvider.addTaglibGrammar(TaglibGrammarProvider.java:42)
at oracle.jdeveloper.webapp.runtime.WebAppDesignContextFactory._createContext(WebAppDesignContextFactory.java:460)
at oracle.jdeveloper.webapp.runtime.WebAppDesignContextFactory.createWebAppDesignContext(WebAppDesignContextFactory.java:1
63)
at oracle.jdeveloper.webapp.runtime.WebAppDesignContextFactory.createWebAppDesignContext(WebAppDesignContextFactory.java:1
28)
at oracle.jdeveloper.webapp.runtime.WebAppDesignContextFactory.createWebAppDesignContext(WebAppDesignContextFactory.java:9
6)
at oracle.adf.share.web.mds.ServletMetadataProvider.init(ServletMetadataProvider.java:33)
at oracle.adf.share.http.ServletADFContext.registerServletContextMDSGrammar(ServletADFContext.java:516)
at oracle.adf.share.http.ServletADFContext.initialize(ServletADFContext.java:401)
at oracle.adf.share.http.ServletADFContext.initThreadContext(ServletADFContext.java:315)
at oracle.adf.model.servlet.HttpBindingRequestHandler.initADFContext(HttpBindingRequestHandler.java:53)
at oracle.adf.model.BindingRequestHandler.beginRequest(BindingRequestHandler.java:102)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:187)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:224)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:527)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.IllegalArgumentException: Tag file "/WEB-INF/tags/TVViewIview.tagx" path not starting with /WEB-INF/tags.
at oracle.jdevimpl.webapp.taglib.TaglibUtils.resolveTagFileLocation(TaglibUtils.java:37)
at oracle.jdevimpl.webapp.taglib.grammar.TldGrammarFactory.resolveTagFileLocation(TldGrammarFactory.java:129)
at oracle.jdevimpl.webapp.taglib.grammar.TldTagFileElement.preReadDocument(TldTagFileElement.java:449)
... 51 more
22-apr-2009 9:43:40 oracle.jbo.uicli.mom.CpxUtils$Visitor logMainApplicationCpx
After login in Enterprise Manager I see:
WARNING: Unserializable value:oracle.sysman.core.view.tgtctls.common.DefaultTreeModel@1e054ce for key:UINodePropertyKey[value,17]
PerfFilter: Time taken to render /em/faces/as/as/wlFarmHome: 28432
After login I get repeatedly:
21-apr-2009 9:09:32 org.apache.myfaces.trinidad.bean.PropertyKey saveValue
WARNING: Unserializable value:oracle.sysman.core.view.tgtctls.common.DefaultTreeModel@2a80b2 for key:UINodePropertyKey[value,17]
21-apr-2009 9:09:47 org.apache.myfaces.trinidadinternal.context.RequestContextImpl addPartialTriggerListeners
WARNING: Kan gedeeltelijke trigger pmc_refresh van UIGraph[UIXFacesBeanImpl, id=performance_graph] niet vinden met de ondersteunde
partialTriggers-syntaxis. De gedeeltelijke trigger is gevonden met de afgekeurde syntaxis. Gebruik de ondersteunde syntaxis.
21-apr-2009 9:09:47 org.apache.myfaces.trinidadinternal.context.RequestContextImpl addPartialTriggerListeners
WARNING: Kan gedeeltelijke trigger pmc_refresh van UIGraph[UIXFacesBeanImpl, id=performance_graph] niet vinden met de ondersteunde
partialTriggers-syntaxis. De gedeeltelijke trigger is gevonden met de afgekeurde syntaxis. Gebruik de ondersteunde syntaxis.
JSP Filter: JSP = /as/as/serverHome.jspx
JSP Filter: JSP = /graph/region/performanceMetricChart.jsff
JSP Filter: JSP = /as/as/serverHomeAppDeployments.jspx
JSP Filter: JSP = /ai/sca/soainfra/core/serverComposites.jspx
JSP Filter: JSP = /as/mostRequested/mostRequested.jsff
JSP Filter: JSP = /sdk/templateDefNoForm.jspx
JSP Filter: JSP = /as/sdk/progress/progressRegion.jsff
JSP Filter: JSP = /sdk/globalNavigation.jspx
JSP Filter: JSP = /sdk/topologyNavigation.jspx
JSP Filter: JSP = /service/createService.jspx
JSP Filter: JSP = /events/console/region/blank.jsff
JSP Filter: JSP = /events/console/region/blank.jsff

I also get an error with ESS schema - though a different one than you emailed to me. I'm using XE database and Windows XP.
The document you have for installation is the right one and I agree that you don't need the ESS schema for SOA/BAM.
I don't recognize the error you see in the Admin Server log. Would you confirm this is after the Admin Server is in the RUNNING state and while you are starting the managed server? Are there any errors in the managed server log?
We did have one PM install on Vista and he had to disable ipv6 which is the default on Vista. Here is a forum discussion on it:
SOA Suite for windows vista
You may also encounter the network issue described in the known issues doc (eventually - you don't see the problem until you are deploying your project from jdev).
Let me know if the ipv6 change helps.
Heidi.

Photo gallery problems in Vista IE

Hi there,
I've made Spry Photo Gallery which works fine on Mac(Safari, Opera, Firefox) on Windows 2000 pro IE but don't work on Vista IE.
I can not find a problem. Can anyone help!

It is an HP dv6040ca that has vista 64-bit on it. It has a NVIDIA sata driver, that I have tried to up date today.
Drat. HP has been offering a Microsoft Standard Dual Channel PCI IDE Controller Update/Rollback that has been helping with this sort of thing on desktop models (32-bit), but they aren't offering it on notebooks.
Are you up to date on that BIOS update they are offering? (They don't say what it does, but it might be worth a crack.)
Software & Driver downloads: HP Pavilion dv6040ca Notebook PC (Vista 64-bit)

Photoshop CS2 Upgrade Installation Problems w/ Vista Problems

I recently purchased a new laptop w/ Windows Vista which I'm trying to install my copy of Photoshop CS2 onto. My Photoshop license is an upgrade license ... originally upgraded from Photoshop v4.0.
When installing an upgrade copy of PS CS2, it requires proof of your previous version in order to verify you're a legitimate upgrader. This works fine if you're upgrading from a version of Photoshop after 5.x ...you simply insert your CD and the installation continues. The installation process is less straight-forward for users like myself ... installing from an upgraded version prior to 5. I'm required to call Adobe ... and conduct a phone verification procedure where I give them a code displayed on the screen during installation and they give me a response code to type into the installation form.
I deauthorized my old laptop ... start the installation routine on my new laptop ... call Adobe w/ my verification code ... enter the response code (which is accepted) and complete the installation without any problems. My problem occurs when I go to run the software. The startup screen indicates that the software is still in "Tryout Mode", and the first window I'm presented with is the "Adobe Activation" window requesting my serial number. If I try to enter my CS2 serial number it is rejected with the message:
"You must enter a valid serial number before activating online or viewing activation options. Please check your serial number and re-enter it, or click the Purchase button to buy a copy of this product"
The thing is ... this IS a valid serial number. I've confirmed this with Adobe. (It's probably an upgrade serial number, which is why the software is rejecting it). I called Adobe and they're now telling me that I must enter a paid-support agreement in order to receive help installing my software. They claim their software is working correctly, and it must be a problem with my computer.
Has anybody experienced a problem like this? I refuse to pay more for something that worked fine on XP just to use it on Vista due to bugs in their installation and activation routine.

function(){return A.apply(null,[this].concat($A(arguments)))}
mthight wrote:
Have the bugs of using with Vista been fixed, or still not working? thanks,
I know this is an old problem, but surely there is an answer to fix the problem by now...
What problems? I used Photoshop CS2 with Vista with no problems (I still have it installed on a Vista system if you'd like me to check anything in particular). CS3 and CS4 worked well as well. Haven't tried CS5 on Vista as I have moved up to Windows 7, but I suspect it works just fine.
-Noel

Installation problem w/Vista

Boot Camp/Vista installation problem
MacBook 2GHz Intel Core 2 Duo, 2GB RAM, Snow Leopard 10.6.2.
Trying to install Windows Vista Home Premium using Boot Camp.
Started Boot Camp Installer and created 32GB partition. Inserted Vista disk as instructed and clicked on Start Installation.
Black screen appeared looking like this:
1.
2.
Select CD-ROM Boot Type: _
That last underline was flashing, waiting for input.
First off, I don't know what to type in, but . . .
The keyboard appears to be disabled because no keystroke registers, nor Return/Enter. Even pressing caps lock or num lock fails to register a light on those keys.
The only way out is to hold down the power key until shutdown, then restart with Eject key depressed to eject Vista disk.
Any suggestions would be appreciated.

Hi RebelGood,
have a look here http://forums.macrumors.com/showthread.php?t=467704 for instructions/solution.
Basically you have to make yourself a copy of your Vista disc using the files of that disc and a programm called oscdimg.exe plus a burning program.
And it had to be done on a Windows PC or in virtualized Windows (using Parallels/Fusion/VirtualBox) on your Mac.
Regards
Stefan

CS4 MASTER COLLECTION installation problem on VISTA SP1

whenever i try to install CS$ MASTER COLLECTION on VISTA it shows me the following message. . .
http://img132.imageshack.us/my.php?image=83377733oh8.jpg
any solutions? plz help me...........

I get the same problem - any solution yet?
CS4 programs crash at Startup so I unistalled it plus CS4Clease and MS Clean Installer as advised in forums.
only to find the problem is still not fixed
when installing a
Warning message at install stating cs4 minimum system requirements are not met (this did not appear the first time I installed the program)
http://img132.imageshack.us/my.php?image=83377733oh8.jpg
where as CS4 worked for several months, before the error occured
this is the only warning
it then installs CS4 no problem.
after install
Photoshop and Dreamweaver run but the rest of the packages including inDesign do not - they all crash on startup - continously
I have searched the forums endlessly with no avail.
Would a vista update have stopped CS4 from recognising or identifing the OS, thus causing the program to initially crash?
Vista Home Premium SP1, 32bit, Toshiba Qosmio F50, Intel Core 2 Duo P8400 2.26GHZ
please advise

IE9 Problems in Vista

Similar Messages

Maybe you are looking for